This driver has been replaced by the non-soc-camera rcar-vin driver.
The soc-camera framework is being deprecated, so drop this older
rcar-vin driver in favor of the newer version that does not rely on
this deprecated framework.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check for vb2_ops structures that are only stored in the ops field of a
vb2_queue structure.  That field is declared const, so vb2_ops structures
that have this property can be declared as const also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct vb2_ops i@p = { ... };

@ok@
identifier r.i;
struct vb2_queue e;
position p;
@@
e.ops = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct vb2_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct vb2_ops i = { ... };
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NFabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: NJacek Anaszewski <j.anaszewski@samsung.com>
Reviewed-by: NBenoit Parrot <bparrot@ti.com>
[hans.verkuil@cisco.com: dropped soc_camera/rcar_vin.c patch because that driver will be removed]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

As the conversion to a v4l2 standalone device is finished, move
pxa_camera one directory up and finish severing any dependency to
soc_camera.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of the legacy behavior where it was required to wait for all
video buffers to be finished by the hardware, use a cancel like strategy
: as soon as the stop_streaming() call is done, abort all DMA transfers,
report the already buffers as failed and return.

This makes stop_streaming() more a "cancel capture" than a "wait for end
of capture" semantic.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add pxa_camera registers access through advanced video debugging.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch removes the soc_camera API dependency from pxa_camera.
In the current status :
 - all previously captures are working the same on pxa270
 - the s_crop() call was removed, judged not working
   (see what happens soc_camera_s_crop() when get_crop() == NULL)
 - if the pixel clock is provided by then sensor, ie. not MCLK, the dual
   stage change is not handled yet.
   => there is no in-tree user of this, so I'll let it that way

 - the MCLK is not yet finished, it's as in the legacy way,
   ie. activated at video device opening and closed at video device
   closing.
   In a subsequence patch pxa_camera_mclk_ops should be used, and
   platform data MCLK ignored. It will be the sensor's duty to request
   the clock and enable it, which will end in pxa_camera_mclk_ops.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This is to be seen as a regression as the set_selection (former
set_crop) function is removed. This is a temporary situation in the v4l2
porting, and will have to be added later.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add sequence numbers to completed buffers.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Make all print consistent by always using :
 - dev_xxx(pcdev_to_dev(pcdev), ....)

This prepares the soc_camera adherence removal by making these call rely
on only pcdev, and not the soc_camera icd structure.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Introduce sensor_call(), which will be used for all sensor invocations.
This is a preparation move to v4l2 device conversion, ie. soc_camera
adherence removal.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Move the functions in the file to be regrouped into meaningful blocks :
 1. pxa camera core handling functions, manipulating the herdware
 2. videobuf2 functions, dealing with video buffers
 3. video ioctl (vidioc) related functions
 4. driver probing, removal, suspend and resume

This patch doesn't modify a single line of code.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Convert pxa_camera from videobuf to videobuf2.

As the soc_camera was already compatible with videobuf2, the port is
quite straightforward.

The special case of this code in which the vb2 to prepare is "too
big" in terms of size for the new capture format, the pxa_camera will
fail.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Replace all calls to g/s_crop by calls to the get/set_selection pad ops.

Remove the old g/s_crop video ops since they are now no longer used.

The cropcap video op is now only used to pass pixelaspect information,
and is only needed if the pixelaspect is not 1:1.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The sh_mobile_csi2 isn't used anymore (was it ever?), so remove it.
Especially since the soc-camera framework is being deprecated.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Make this a proper typed array. Drop the old allocate context code since
that is no longer used.

Note that the memops functions now get a struct device pointer instead of
the struct device ** that was there initially (actually a void pointer to
a struct containing only a struct device pointer).

This code is now a lot cleaner.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Stop using alloc_ctx and just fill in the device pointer.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

A V4L2 driver for Renesas R-Car VIN driver that do not depend on
soc_camera. The driver is heavily based on its predecessor and aims to
replace it.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add fallback compatibility string for R-Car Gen 1 and 2.

In the case of Renesas R-Car hardware we know that there are generations of
SoCs, e.g. Gen 2 and 3. But beyond that it's unclear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.

We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.

For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme being adopted for
drivers for Renesas SoCs.
Signed-off-by: NYoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

A dependency on ARCH_SHMOBILE seems to be the best option for
sh_mobile_ceu_camera:

* For Super H based SoCs: sh_mobile_ceu is used on SH_AP325RXA, SH_ECOVEC,
  SH_KFR2R09, SH_MIGOR, and SH_7724_SOLUTION_ENGINE which depend on
  CPU_SUBTYPE_SH7722, CPU_SUBTYPE_SH7723, or CPU_SUBTYPE_SH7724 which all
  select ARCH_SHMOBILE.

* For ARM Based SoCs: Since the removal of legacy (non-multiplatform)
  support this driver has not been used by any Renesas ARM based SoCs.
  The Renesas ARM based SoCs currently select ARCH_SHMOBILE, however,
  it is planned that this will no longer be the case.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.

Thanks to Geert Uytterhoeven for analysis and portions of the
change log text.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This driver is deprecated: it should become a stand-alone driver
instead of using the soc-camera framework.

Unless someone is willing to take this on (unlikely with such
ancient hardware) it is going to be removed from the kernel
soon.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This driver is deprecated: it should become a stand-alone driver
instead of using the soc-camera framework.

Unless someone is willing to take this on (unlikely with such
ancient hardware) it is going to be removed from the kernel
soon.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This driver is deprecated: it needs to be converted to vb2 and
it should become a stand-alone driver instead of using the
soc-camera framework.

Unless someone is willing to take this on (unlikely with such
ancient hardware) it is going to be removed from the kernel
soon.
Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

IS_ERR_VALUE() assumes that its parameter is an unsigned long.
It can not be used to check if an unsigned int reflects an error.
Doing so can result in the following build warning.

drivers/media/platform/soc_camera/atmel-isi.c:
	In function "atmel_isi_probe":
	include/linux/err.h:21:38: warning:
		comparison is always false due to limited range of data type
drivers/media/platform/soc_camera/atmel-isi.c:1089:6: note:
	in expansion of macro "IS_ERR_VALUE"

If that warning is seen, the return value from platform_get_irq() is not
checked for errors.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Convert pxa_camera to dmaengine. This removes all DMA registers
manipulation in favor of the more generic dmaengine API.

The functional level should be the same as before. The biggest change is
in the sg_split() function, which splits a videobuf-dma into several
scatterlists for 3 planes captures (Y, U, V).
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
[g.liakhovetski@gmx.de: fix a function prototype, use bool, struct init]
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This moves the dma irq handling functions up in the source file, so that
they are available before DMA preparation functions. It prepares the
conversion to DMA engine, where the descriptors are populated with these
functions as callbacks.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

In preparation for dmaengine conversion, move the camera interrupt
handling into a tasklet. This won't change the global flow, as this
interrupt is only used to detect the end of frame and activate DMA fifos
handling.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix the error path where the video buffer wasn't allocated nor
mapped. In this case, in the driver free path don't try to unmap memory
which was not mapped in the first place.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The mx3_camera driver prints DMA addresses using the "%x" format
string, which is wrong when using a 64-bit dma_addr_t definition:

media/platform/soc_camera/mx3_camera.c: In function 'mx3_cam_dma_done':
media/platform/soc_camera/mx3_camera.c:149:125: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=]
media/platform/soc_camera/mx3_camera.c: In function 'mx3_videobuf_queue':
media/platform/soc_camera/mx3_camera.c:317:119: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=]
media/platform/soc_camera/mx3_camera.c: In function 'mx3_videobuf_release':
media/platform/soc_camera/mx3_camera.c:346:119: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=]

This changes the code to use the special %pad format string, which
always does the right thing.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch adds ARGB8888 capture format support for R-Car Gen3.
Signed-off-by: NKoji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: NYoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add chip identification for R-Car Gen3.
Signed-off-by: NYoshihiko Mori <yoshihiko.mori.nx@renesas.com>
Signed-off-by: NYoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use soc_camera_from_vb2q() instead of open-coding it.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Correct the debug output message to show correct format.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

I got the following WARN on a simple unbind/bind cycle:

root@Lager:/sys/bus/i2c/drivers/adv7180# echo 6-0020 > unbind
root@Lager:/sys/bus/i2c/drivers/adv7180# echo 6-0020 > bind
[   31.097652] adv7180 6-0020: chip found @ 0x20 (e6520000.i2c)
[   31.123744] ------------[ cut here ]------------
[   31.128413] WARNING: CPU: 3 PID: 873 at drivers/media/platform/soc_camera/soc_camera.c:1463 soc_camera_async_bound+0x40/0xa0()
[   31.139896] CPU: 3 PID: 873 Comm: sh Not tainted 4.4.0-rc3-00062-ge8ae2c0b6bca2a #172
[   31.147815] Hardware name: Generic R8A7790 (Flattened Device Tree)
[   31.154056] Backtrace:
[   31.156575] [<c0014bc0>] (dump_backtrace) from [<c0014d80>] (show_stack+0x20/0x24)
[   31.164233]  r6:c05c5b33 r5:00000009 r4:00000000 r3:00404100
[   31.170017] [<c0014d60>] (show_stack) from [<c01e2344>] (dump_stack+0x78/0x94)
[   31.177344] [<c01e22cc>] (dump_stack) from [<c0029e7c>] (warn_slowpath_common+0x98/0xc4)
[   31.185518]  r4:00000000 r3:00000000
[   31.189172] [<c0029de4>] (warn_slowpath_common) from [<c0029fa0>] (warn_slowpath_null+0x2c/0x34)
[   31.198043]  r8:eb38df28 r7:eb38c5d0 r6:eb38de80 r5:e6962810 r4:eb38de80
[   31.204898] [<c0029f74>] (warn_slowpath_null) from [<c0356348>] (soc_camera_async_bound+0x40/0xa0)
[   31.213955] [<c0356308>] (soc_camera_async_bound) from [<c03499a0>] (v4l2_async_test_notify+0x9c/0x108)
[   31.223430]  r5:eb38c5ec r4:eb38de80
[   31.227084] [<c0349904>] (v4l2_async_test_notify) from [<c0349dd8>] (v4l2_async_register_subdev+0x88/0xd0)
[   31.236822]  r7:c07115c8 r6:c071160c r5:eb38c5ec r4:eb38de80
[   31.242622] [<c0349d50>] (v4l2_async_register_subdev) from [<c0337040>] (adv7180_probe+0x2c8/0x3a4)
[   31.251753]  r8:00000000 r7:00000001 r6:eb38de80 r5:ea973400 r4:eb38de10 r3:00000000
[   31.259660] [<c0336d78>] (adv7180_probe) from [<c032dd80>] (i2c_device_probe+0x1a0/0x1e4)

This gets fixed by clearing the control device pointer on async_unbind.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer
for common use, and change its type to u64 in order to handling
y2038 problem. This patch also includes all device drivers' changes related to
this restructuring.
Signed-off-by: NJunghak Sung <jh1009.sung@samsung.com>
Signed-off-by: NGeunyoung Kim <nenggun.kim@samsung.com>
Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NHans Verkuil <hansverk@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The queue_setup callback has a void pointer that is just for V4L2
and is the pointer to the v4l2_format struct that was passed to
VIDIOC_CREATE_BUFS. The idea was that drivers would use the information
from that struct to buffers suitable for the requested format.

After the vb2 split series this pointer is now a void pointer,
which is ugly, and the reality is that all existing drivers will
effectively just look at the sizeimage field of v4l2_format.

To make this more generic the queue_setup callback is changed:
the void pointer is dropped, instead if the *num_planes argument
is 0, then use the current format size, if it is non-zero, then
it contains the number of requested planes and the sizes array
contains the requested sizes. If either is unsupported, then return
-EINVAL, otherwise use the requested size(s).
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Since commit 3d7608e4 ("ARM: shmobile: bockw: remove legacy
board file and config"), Renesas R-Car SoCs are only supported in
generic DT-only ARM multi-platform builds.  The driver doesn't need to
use platform data anymore, hence remove platform data configuration.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Now that media has its own subdirectory inside platform_data,
let's move the headers that are already there to such subdir.

After moving those files, the references were adjusted using this
script:

    MAIN_DIR="linux/platform_data/"
    PREV_DIR="linux/platform_data/"
    DIRS="media/"

    echo "Checking affected files" >&2
    for i in $DIRS; do
	for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do
		 n=`basename $j`
		git grep -l $n
	done
    done|sort|uniq >files && (
	echo "Handling files..." >&2;
	echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\";
	(
		cd include/$MAIN_DIR;
		for j in $DIRS; do
			for i in $(ls $j); do
				echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\";
			done;
		done;
		echo "cat > a && mv a \$i; done";
	);
	echo "Handling documentation..." >&2;
	echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\";
	(
		cd include/$MAIN_DIR;
		for j in $DIRS; do
			for i in $(ls $j); do
				echo "  perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\";
			done;
		done;
		echo "cat > a && mv a \$i; done"
	);
    ) >script && . ./script
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMark Brown <broonie@kernel.org>
Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This patch enable Atmel ISI preview path to convert the YUV to RGB format.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
[g.liakhovetski@gmx.de: removed superfluous parentheses]
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The preview path only can convert UYVY format to RGB data.

To make preview path work correctly, we need to set up YCC_SWAP
according to sensor output and convert them to UYVY.
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>