- 28 1月, 2013 1 次提交
-
-
由 Laurent Pinchart 提交于
Replace occurences of gpio_request() and gpio_direction_*() by calls to gpio_request_one(). Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 21 11月, 2012 4 次提交
-
-
由 Laurent Pinchart 提交于
Don't hook up brightness control in the display on/off operations, use the backlight API instead. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSimon Horman <horms@verge.net.au>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSimon Horman <horms@verge.net.au>
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSimon Horman <horms@verge.net.au>
-
由 Laurent Pinchart 提交于
Reference the MIPI-DSI transceiver in the LCDC platform data and make sure it gets registered before the LCDC. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NSimon Horman <horms@verge.net.au>
-
- 14 9月, 2012 1 次提交
-
-
由 Marc Zyngier 提交于
Convert shmobile SMP platforms to use struct smp_operations to provide their SMP and CPU hotplug operations. Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Acked-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 31 8月, 2012 1 次提交
-
-
由 Wei Yongjun 提交于
From: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Remove duplicated include. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
- 01 7月, 2012 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
On ag5evm provide 1.8V, 2.8V, and 3.3V supplies for its SD/MMC-card interfaces and a dummy regulator for the smsc911x driver. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 13 5月, 2012 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
This also fixes the following modular mmc build failure: arch/arm/mach-shmobile/built-in.o: In function `mackerel_sdhi0_gpio_cd': pfc-sh7372.c:(.text+0x1138): undefined reference to `mmc_detect_change' on this platform by eliminating the use of an inline function, which calls into the mmc core. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: NSimon Horman <horms@verge.net.au> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 08 5月, 2012 1 次提交
-
-
由 Shawn Guo 提交于
Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NMagnus Damm <damm@opensource.se> Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl>
-
- 14 3月, 2012 1 次提交
-
-
由 Rob Herring 提交于
Several platforms incorrectly use __io() for casting to 'void __iomem *'. This converts all of those uses to use the common IOMEM macro. Reported-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Cc: linux-sh@vger.kernel.org Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 13 3月, 2012 5 次提交
-
-
由 Laurent Pinchart 提交于
The struct sh_mobile_lcdc_chan_cfg platform data contains a list of video modes. Name the lcd_cfg and num_cfg fields to reflect that they describe video modes. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Laurent Pinchart 提交于
Update board code accordingly. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Laurent Pinchart 提交于
The field is unused, remove it. Update board code accordingly. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Magnus Damm 提交于
Move the SoC specific timer code from AG5EVM and Kota2 to sh73a0 setup code. This makes is possible to share the SoC specific timer code across boards and it also removes the need for a board specific timer structure. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
Update the sh73a0 SoC and the AG5EVM and Kota2 boards to make use of the functions sh73a0_map_io() and sh73a0_add_early_devices(). Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 07 3月, 2012 1 次提交
-
-
由 Laurent Pinchart 提交于
The board file uses a 4CC defined in linux/videodev2.h. Include the header to fix arch/arm/mach-shmobile/board-ag5evm.c:262: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function) Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 24 2月, 2012 1 次提交
-
-
由 Danny Kukawka 提交于
arch/arm/mach-shmobile/board-ag5evm.c: included 'linux/dma-mapping.h' twice, remove the duplicate. Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 26 1月, 2012 1 次提交
-
-
由 Rob Herring 提交于
Remove NR_IRQS and explicitly include mach/irqs.h as needed. shmobile properly allocates irq_descs for each irqchip, so setting .nr_irqs for each machine is not needed. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
- 24 1月, 2012 2 次提交
-
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Gortmaker 提交于
Add videodev2 header which provides V4L2_PIX_FMT_RGB565 to fix: arch/arm/mach-shmobile/board-ag5evm.c:274: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function) Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 18 1月, 2012 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
Use the simplified method to specify MMCIF DMA slave configuration. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 03 1月, 2012 1 次提交
-
-
由 Magnus Damm 提交于
The 158MiB memory area was used to support HD resolution multimedia workloads using the same legacy memory allocating solution as on SH. There are no in-tree kernel dependencies on the 158MiB setting, and future development should reserve and allocate memory using some other method like for instance CMA. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NNicolas Pitre <nico@linaro.org>
-
- 20 12月, 2011 1 次提交
-
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 24 11月, 2011 1 次提交
-
-
由 Magnus Damm 提交于
Fix IRQ support on the AG5EVM board. The sh73a0 and the AG5EVM board make use of the ARM GIC hardware block as main interrupt controller. The following commit changed the default behaviour for non-device tree platforms and broke AG5EVM irq support: f37a53cc ARM: gic: fix irq_alloc_descs handling for sparse irq Without this fix the following warning triggers at boot: NR_IRQS:1024 nr_irqs:1024 1024 ------------[ cut here ]------------ WARNING: at arch/arm/common/gic.c:607 gic_init+0x90/0x2e4() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [<c000c868>] (unwind_backtrace+0x0/0xe0) from [<c001857c>] (warn_slowpath_commo) [<c001857c>] (warn_slowpath_common+0x48/0x60) from [<c00185d8>] (warn_slowpath_) [<c00185d8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c029ee08>] (gic_init+0x90/0x2) [<c029ee08>] (gic_init+0x90/0x2e4) from [<c029f278>] (sh73a0_init_irq+0x30/0x18) [<c029f278>] (sh73a0_init_irq+0x30/0x184) from [<c029c0b4>] (init_IRQ+0x14/0x1c) [<c029c0b4>] (init_IRQ+0x14/0x1c) from [<c029a5cc>] (start_kernel+0x15c/0x2b8) [<c029a5cc>] (start_kernel+0x15c/0x2b8) from [<4000803c>] (0x4000803c) ---[ end trace 1b75b31a2719ed1c ]--- With this fix applied interrupts work as expected. Signed-off-by: NMagnus Damm <damm@opensource.se> Acked-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 22 11月, 2011 4 次提交
-
-
由 Kuninori Morimoto 提交于
SH MIPI manual explains the calculation method of HBP/HFP. it is based on HSbyteCLK settings. SH73a0 chip can use HS6divCLK/HS4divCLK for it. This patch has compatibility to SH7372 mipi Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
由 Kuninori Morimoto 提交于
Dot clock of SH MIPI are depends on each platform board. This patch adds set_dot_clock() function for it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
由 Kuninori Morimoto 提交于
SH MIPI DSI can use 0-4 lane Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 16 11月, 2011 1 次提交
-
-
由 Marc Zyngier 提交于
Convert the SMP shmobile platforms to use gic_handle_irq() instead of the assembly macro. Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
- 11 11月, 2011 1 次提交
-
-
由 Kuninori Morimoto 提交于
This patch adds MMC data pin pull-up option for pfc-sh73a0.c, and select it on ag5evm board. The MMC read/write will be error without this patch. Cc: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Tested-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 05 11月, 2011 2 次提交
-
-
由 Magnus Damm 提交于
Support PINT on sh73a0 and AG5EVM using INTC PINT macros. With this patch applied the AG5EVM ethernet is handled through one of the chained sh73a0 PINT interrupt controllers. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Implement GPIO hotplugging via TMIO_MMC_HAS_COLD_CD for AG5EVM SDHI0. This is possible now when INTCA is used for IRQ triggering on sh73a0. Without INTCA IRQ support we are left with the GIC hardware block that does not support dealing with active low interrupt sources. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 27 10月, 2011 1 次提交
-
-
由 Simon Horman 提交于
This allows specific (non-multiplexed) IRQ handlers to be used. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: NMagnus Damm <magnus.damm@gmail.com> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 22 8月, 2011 1 次提交
-
-
由 Jon Medhurst 提交于
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk> CC: Paul Mundt <lethal@linux-sh.org> CC: Magnus Damm <magnus.damm@gmail.com>
-
- 25 7月, 2011 1 次提交
-
-
由 Simon Horman 提交于
The SDHI block on the ag5evm requires waiting for idle before writing to some registers. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 21 6月, 2011 1 次提交
-
-
由 Simon Horman 提交于
Name the SDHI1 instance sh_sdhi1_info to be consistent with sh_sdhi0_info. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 14 6月, 2011 1 次提交
-
-
由 Magnus Damm 提交于
Add a flag for SDHI1 to enable SDIO IRQ, and remove DMA Engine slave id:s to disable DMA as a workaround. Tested on sh73a0/AG5EVM with a BCM4318-based SDIO card. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 25 5月, 2011 2 次提交
-
-
由 Magnus Damm 提交于
Add SDHI0 and SDHI1 slave ids for RX and TX to enable DMA Engine support for SDHI on the AG5EVM board. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Simply add MMCIF slave ids for RX and TX to enable DMA Engine support for the AG5EVM board. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-