提交 018882aa 编写于 作者: L Laurent Pinchart

fbdev: sh_mobile_lcdc: Remove board configuration board_data field

The field is unused, remove it. Update board code accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
上级 aa7b5b0b
......@@ -229,16 +229,6 @@ static void lcd_backlight_reset(void)
gpio_set_value(GPIO_PORT235, 1);
}
static void lcd_on(void *board_data, struct fb_info *info)
{
lcd_backlight_on();
}
static void lcd_off(void *board_data)
{
lcd_backlight_reset();
}
/* LCDC0 */
static const struct fb_videomode lcdc0_modes[] = {
{
......@@ -268,8 +258,8 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
.lcd_cfg = lcdc0_modes,
.num_cfg = ARRAY_SIZE(lcdc0_modes),
.board_cfg = {
.display_on = lcd_on,
.display_off = lcd_off,
.display_on = lcd_backlight_on,
.display_off = lcd_backlight_reset,
},
}
};
......
......@@ -351,14 +351,14 @@ static struct fb_videomode mackerel_lcdc_modes[] = {
},
};
static int mackerel_set_brightness(void *board_data, int brightness)
static int mackerel_set_brightness(int brightness)
{
gpio_set_value(GPIO_PORT31, brightness);
return 0;
}
static int mackerel_get_brightness(void *board_data)
static int mackerel_get_brightness(void)
{
return gpio_get_value(GPIO_PORT31);
}
......
......@@ -157,7 +157,7 @@ static struct platform_device nand_flash_device = {
#define PORT_DRVCRA 0xA405018A
#define PORT_DRVCRB 0xA405018C
static int ap320_wvga_set_brightness(void *board_data, int brightness)
static int ap320_wvga_set_brightness(int brightness)
{
if (brightness) {
gpio_set_value(GPIO_PTS3, 0);
......@@ -170,12 +170,12 @@ static int ap320_wvga_set_brightness(void *board_data, int brightness)
return 0;
}
static int ap320_wvga_get_brightness(void *board_data)
static int ap320_wvga_get_brightness(void)
{
return gpio_get_value(GPIO_PTS3);
}
static void ap320_wvga_power_on(void *board_data, struct fb_info *info)
static void ap320_wvga_power_on(void)
{
msleep(100);
......@@ -183,7 +183,7 @@ static void ap320_wvga_power_on(void *board_data, struct fb_info *info)
__raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
}
static void ap320_wvga_power_off(void *board_data)
static void ap320_wvga_power_off(void)
{
/* ASD AP-320/325 LCD OFF */
__raw_writew(0, FPGA_LCDREG);
......
......@@ -310,14 +310,14 @@ static const struct fb_videomode ecovec_dvi_modes[] = {
},
};
static int ecovec24_set_brightness(void *board_data, int brightness)
static int ecovec24_set_brightness(int brightness)
{
gpio_set_value(GPIO_PTR1, brightness);
return 0;
}
static int ecovec24_get_brightness(void *board_data)
static int ecovec24_get_brightness(void)
{
return gpio_get_value(GPIO_PTR1);
}
......
......@@ -251,8 +251,7 @@ static void display_on(void *sohandle,
write_memory_start(sohandle, so);
}
int kfr2r09_lcd_setup(void *board_data, void *sohandle,
struct sh_mobile_lcdc_sys_bus_ops *so)
int kfr2r09_lcd_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
{
/* power on */
gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
......@@ -273,8 +272,7 @@ int kfr2r09_lcd_setup(void *board_data, void *sohandle,
return 0;
}
void kfr2r09_lcd_start(void *board_data, void *sohandle,
struct sh_mobile_lcdc_sys_bus_ops *so)
void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
{
write_memory_start(sohandle, so);
}
......@@ -327,12 +325,12 @@ static int kfr2r09_lcd_backlight(int on)
return 0;
}
void kfr2r09_lcd_on(void *board_data, struct fb_info *info)
void kfr2r09_lcd_on(void)
{
kfr2r09_lcd_backlight(1);
}
void kfr2r09_lcd_off(void *board_data)
void kfr2r09_lcd_off(void)
{
kfr2r09_lcd_backlight(0);
}
......@@ -113,8 +113,7 @@ static const unsigned short magic3_data[] = {
0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
};
int migor_lcd_qvga_setup(void *board_data, void *sohandle,
struct sh_mobile_lcdc_sys_bus_ops *so)
int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
{
unsigned long xres = 320;
unsigned long yres = 240;
......
......@@ -186,8 +186,6 @@ static struct sh_mobile_lcdc_info lcdc_info = {
.width = 152,
.height = 91,
},
.board_cfg = {
},
}
};
......
......@@ -4,21 +4,21 @@
#include <video/sh_mobile_lcdc.h>
#if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE)
void kfr2r09_lcd_on(void *board_data, struct fb_info *info);
void kfr2r09_lcd_off(void *board_data);
int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
void kfr2r09_lcd_on(void);
void kfr2r09_lcd_off(void);
int kfr2r09_lcd_setup(void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle,
void kfr2r09_lcd_start(void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
#else
static void kfr2r09_lcd_on(void *board_data) {}
static void kfr2r09_lcd_off(void *board_data) {}
static int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
static void kfr2r09_lcd_on(void) {}
static void kfr2r09_lcd_off(void) {}
static int kfr2r09_lcd_setup(void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
{
return -ENODEV;
}
static void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle,
static void kfr2r09_lcd_start(void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
{
}
......
......@@ -9,7 +9,7 @@
#include <video/sh_mobile_lcdc.h>
int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
int migor_lcd_qvga_setup(void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
#endif /* __ASM_SH_MIGOR_H */
......@@ -315,14 +315,12 @@ static void sh_mobile_lcdc_deferred_io(struct fb_info *info,
/* trigger panel update */
dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
if (bcfg->start_transfer)
bcfg->start_transfer(bcfg->board_data, ch,
&sh_mobile_lcdc_sys_bus_ops);
bcfg->start_transfer(ch, &sh_mobile_lcdc_sys_bus_ops);
lcdc_write_chan(ch, LDSM2R, LDSM2R_OSTRG);
dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
} else {
if (bcfg->start_transfer)
bcfg->start_transfer(bcfg->board_data, ch,
&sh_mobile_lcdc_sys_bus_ops);
bcfg->start_transfer(ch, &sh_mobile_lcdc_sys_bus_ops);
lcdc_write_chan(ch, LDSM2R, LDSM2R_OSTRG);
}
}
......@@ -346,7 +344,7 @@ static void sh_mobile_lcdc_display_on(struct sh_mobile_lcdc_chan *ch)
/* HDMI must be enabled before LCDC configuration */
if (board_cfg->display_on)
board_cfg->display_on(board_cfg->board_data, ch->info);
board_cfg->display_on();
}
static void sh_mobile_lcdc_display_off(struct sh_mobile_lcdc_chan *ch)
......@@ -354,7 +352,7 @@ static void sh_mobile_lcdc_display_off(struct sh_mobile_lcdc_chan *ch)
struct sh_mobile_lcdc_board_cfg *board_cfg = &ch->cfg.board_cfg;
if (board_cfg->display_off)
board_cfg->display_off(board_cfg->board_data);
board_cfg->display_off();
if (ch->tx_dev)
ch->tx_dev->ops->display_off(ch->tx_dev);
......@@ -697,7 +695,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
board_cfg = &ch->cfg.board_cfg;
if (board_cfg->setup_sys) {
ret = board_cfg->setup_sys(board_cfg->board_data, ch,
ret = board_cfg->setup_sys(ch,
&sh_mobile_lcdc_sys_bus_ops);
if (ret)
return ret;
......@@ -1326,7 +1324,7 @@ static int sh_mobile_lcdc_update_bl(struct backlight_device *bdev)
bdev->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
brightness = 0;
return cfg->set_brightness(cfg->board_data, brightness);
return cfg->set_brightness(brightness);
}
static int sh_mobile_lcdc_get_brightness(struct backlight_device *bdev)
......@@ -1334,7 +1332,7 @@ static int sh_mobile_lcdc_get_brightness(struct backlight_device *bdev)
struct sh_mobile_lcdc_chan *ch = bl_get_data(bdev);
struct sh_mobile_lcdc_board_cfg *cfg = &ch->cfg.board_cfg;
return cfg->get_brightness(cfg->board_data);
return cfg->get_brightness();
}
static int sh_mobile_lcdc_check_fb(struct backlight_device *bdev,
......
......@@ -148,15 +148,14 @@ struct sh_mobile_lcdc_sys_bus_ops {
};
struct sh_mobile_lcdc_board_cfg {
void *board_data;
int (*setup_sys)(void *board_data, void *sys_ops_handle,
int (*setup_sys)(void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
void (*start_transfer)(void *board_data, void *sys_ops_handle,
void (*start_transfer)(void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
void (*display_on)(void *board_data, struct fb_info *info);
void (*display_off)(void *board_data);
int (*set_brightness)(void *board_data, int brightness);
int (*get_brightness)(void *board_data);
void (*display_on)(void);
void (*display_off)(void);
int (*set_brightness)(int brightness);
int (*get_brightness)(void);
};
struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册