- 17 4月, 2008 36 次提交
-
-
由 Dave Olson 提交于
This patch makes some constants chip-specific, and makes some related changes to prepare for supporting another HCA. Signed-off-by: Dave Olson <dave.olson@qlogic.com Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Arthur Jones 提交于
Recent sparse versions and kernel cleanups knock down the false positive rate of the ipath driver code to a point where having it be sparse clean is worthwhile. Here we fixup the sparse warnings. Some of these warnings (and the impetus to run sparse again) are due to work by Roland Dreier. Signed-off-by: NArthur Jones <arthur.jones@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Eli Cohen 提交于
Arbel and Sinai devices support checksum generation and verification of TCP and UDP packets for UD IPoIB messages. This patch checks if the HCA supports this and sets the IB_DEVICE_UD_IP_CSUM capability flag if it does. It implements support for handling the IB_SEND_IP_CSUM send flag and setting the csum_ok field in receive work completions. Signed-off-by: NEli Cohen <eli@mellnaox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Eli Cohen 提交于
ConnectX devices support checksum generation and verification of TCP and UDP packets for UD IPoIB messages. This patch checks if the HCA supports this and sets the IB_DEVICE_UD_IP_CSUM capability flag if it does. It implements support for handling the IB_SEND_IP_CSUM send flag and setting the csum_ok field in receive work completions. Signed-off-by: NEli Cohen <eli@mellanox.co.il> Signed-off-by: NAli Ayub <ali@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Eli Cohen 提交于
For HCAs that support checksum offload (ie that set IB_DEVICE_UD_IP_CSUM in the device capabilities flags), have IPoIB set NETIF_F_IP_CSUM and use the HCA to generate and verify IP checksums. Signed-off-by: NEli Cohen <eli@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ instead. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Allow the compiler to optimize better and generate smaller code: add/remove: 0/6 grow/shrink: 2/0 up/down: 1528/-1864 (-336) function old new delta .ehca_set_pagebuf 1344 2172 +828 .ehca_probe 2312 3012 +700 ehca_set_pagebuf_phys 24 - -24 ehca_set_pagebuf_fmr 24 - -24 ehca_init_device 24 - -24 .ehca_set_pagebuf_fmr 480 - -480 .ehca_set_pagebuf_phys 512 - -512 .ehca_init_device 800 - -800 Also this fixes warnings like: drivers/infiniband/hw/ehca/ehca_mrmw.c:2015:5: warning: symbol 'ehca_set_pagebuf_fmr' was not declared. Should it be static? Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Avoid namespace pollution and allow the compiler to optimize better. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
On some platforms, eg sparc64, dma_addr_t is not the same size as a pointer, so printing dma_addr_t values by casting to void * and using a %p format generates warnings. Fix this by casting to unsigned long and using %lx instead. This fixes the warnings: drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_setup_virt_qp': drivers/infiniband/hw/nes/nes_verbs.c:1047: warning: cast to pointer from integer of different size drivers/infiniband/hw/nes/nes_verbs.c:1078: warning: cast to pointer from integer of different size drivers/infiniband/hw/nes/nes_verbs.c:1078: warning: cast to pointer from integer of different size drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_reg_user_mr': drivers/infiniband/hw/nes/nes_verbs.c:2657: warning: cast to pointer from integer of different size Reported by Andrew Morton <akpm@linux-foundation.org>. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
nes_netdev_exit() has no callers, so delete it. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
nes_unregister_ofa_device() dereferences the nesibdev pointer before testing if it's NULL. Also, the test is doubly redundant because the only caller of nes_unregister_ofa_device() is nes_destroy_ofa_device(), which already tests if nesibdev is NULL. Remove the unnecessary test. This was spotted by the Coverity checker (CID 2190). Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Christoph Hellwig wants to unexport get_empty_filp(), which is an ugly internal interface. Change the modular user in ib_uverbs_alloc_event_file() to use the better alloc_file() interface; this makes the code cleaner too. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
The file member of struct ib_uverbs_event_file was only used to keep track of whether the file had been closed or not. The only thing we ever did with the value was check if it was NULL or not. Simplify the code and get rid of the need to keep track of the struct file * we allocate by replacing the file member with an is_closed member. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
The struct mlx4_interface.event() method was supposed to get an enum mlx4_dev_event, but the driver code was actually passing in the hardware enum mlx4_event values. Fix up the callers of mlx4_dispatch_event() so that they pass in the right type of value, and fix up the event method in mlx4_ib so that it can handle the enum mlx4_dev_event values. This eliminates the need for the subtype parameter to the event method, so remove it. This also fixes the sparse warning drivers/net/mlx4/intf.c:127:48: warning: mixing different enum types drivers/net/mlx4/intf.c:127:48: int enum mlx4_event versus drivers/net/mlx4/intf.c:127:48: int enum mlx4_dev_event Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NSteve Wise <swise@opengridcomputing.com>
-
由 Roland Dreier 提交于
None of the cqp_reqs_XXX counters were ever used anywhere, and neither was the nics_per_function variable. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Fix a couple of htonl() that should really be ntohl(). Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Add __force cast of node_guid to __u64, since we are sticking it into a structure whose definition is shared with userspace. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Mostly update the RB tree comparisons to force __be types to normal integers, but the change to cm_format_sidr_req() is a real fix: param->path->pkey is already __be16. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NSean Hefty <sean.hefty@intel.com>
-
由 Roland Dreier 提交于
Trivial fixes to stamp_send_wqe(). Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Fix drivers/infiniband/hw/ipath/ipath_init_chip.c:526:10: warning: symbol 'val' shadows an earlier one drivers/infiniband/hw/ipath/ipath_init_chip.c:473:6: originally declared here by giving the second val a different name. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NArthur Jones <arthur.jones@qlogic.com>
-
由 Arthur Jones 提交于
There's no reason for the third parameter of ipath_count_units() to be a u32 *, so change it to be an int * instead. This fixes the sparse warning: drivers/infiniband/hw/ipath/ipath_file_ops.c:1654:47: warning: incorrect type in argument 3 (different signedness) drivers/infiniband/hw/ipath/ipath_file_ops.c:1654:47: expected unsigned int [usertype] *maxportsp drivers/infiniband/hw/ipath/ipath_file_ops.c:1654:47: got int *<noident> Signed-off-by: NArthur Jones <arthur.jones@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
IDR IDs are signed, so struct ib_uobject.id should be signed. This avoids some sparse pointer signedness warnings. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Fix sparse warnings about pointer signedness by using a signed int when calling idr_get_new_above(). Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NSteve Wise <swise@opengridcomputing.com>
-
由 Roland Dreier 提交于
Write tests for NULL pointers as if (!ptr) instead of if (ptr == 0UL) to fix sparse warnings. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NSteve Wise <swise@opengridcomputing.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Fix a few whitespace and other coding style problems. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: it821x: do not describe noraid parameter with its value Pb1200/DBAu1200: fix bad IDE resource size Au1200: IDE driver build fix Au1200: kill IDE driver function prototypes avr32 mustn't select HAVE_IDE
-
由 Paul Bolle 提交于
Describe noraid parameter with its name (and not its value). Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
The header files for the Pb1200/DBAu1200 boards have wrong definition for the IDE interface's decoded range length -- it should be 512 bytes according to what the IDE driver does. In addition, the IDE platform device claims 1 byte too many for its memory resource -- fix the platform code and the IDE driver in accordance. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
The driver fails to compile with CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA enabled: drivers/ide/mips/au1xxx-ide.c: In function `auide_build_dmatable': drivers/ide/mips/au1xxx-ide.c:256: error: implicit declaration of function `sg_virt' drivers/ide/mips/au1xxx-ide.c:275: error: implicit declaration of function `sg_next' drivers/ide/mips/au1xxx-ide.c:275: warning: assignment makes pointer from integer without a cast Fix this by including <linux/scatterlist.h>. While at it, remove the #include's without which the driver happily builds. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c: include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared `static' but never defined include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared `static' but never defined by wiping out the whole "function prototyping" section from the header file <asm-mips/mach-au1x00/au1xxx_ide.h> as it mostly declared functions that are already dead in the IDE driver; move the only useful prototype into the driver. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
There's a libata based PATA driver for avr32, but no support for drivers/ide/ on avr32. This patch fixes the following compile error: <-- snip --> ... CC [M] drivers/ide/ide-cd.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/ide-cd.c:37: /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/ide.h:209:21: error: asm/ide.h: No such file or directory make[3]: *** [drivers/ide/ide-cd.o] Error 1 <-- snip --> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 16 4月, 2008 4 次提交
-
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: update git url for blktrace io context: increment task attachment count in ioc_task_link()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: remove broken usb-serial num_endpoints check USB: option: Add new vendor ID and device ID for AMOI HSDPA modem USB: support more Huawei data card product IDs USB: option.c: add more device IDs USB: Obscure Maxon BP3-USB Device Support 16d8:6280 for option driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [TCP]: Add return value indication to tcp_prune_ofo_queue(). PS3: gelic: fix the oops on the broken IE returned from the hypervisor b43legacy: fix DMA mapping leakage mac80211: remove message on receiving unexpected unencrypted frames Update rt2x00 MAINTAINERS entry Add rfkill to MAINTAINERS file rfkill: Fix device type check when toggling states b43legacy: Fix usage of struct device used for DMAing ssb: Fix usage of struct device used for DMAing MAINTAINERS: move to generic repository for iwlwifi b43legacy: fix initvals loading on bcm4303 rtl8187: Add missing priv->vif assignments netconsole: only set CON_PRINTBUFFER if the user specifies a netconsole [CAN]: Update documentation of struct sockaddr_can MAINTAINERS: isdn4linux@listserv.isdn4linux.de is subscribers-only [TCP]: Fix never pruned tcp out-of-order queue. [NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
-
由 Paul Bolle 提交于
Describe debug parameters with their names (and not their values). Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-