提交 b4dcaea3 编写于 作者: S Sergei Shtylyov 提交者: Bartlomiej Zolnierkiewicz

Pb1200/DBAu1200: fix bad IDE resource size

The header files for the Pb1200/DBAu1200 boards have wrong definition for the
IDE interface's decoded range length -- it should be 512 bytes according to
what the IDE driver does.  In addition, the IDE platform device claims 1 byte
too many for its memory resource -- fix the platform code and the IDE driver
in accordance.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 fabd3a22
......@@ -189,7 +189,7 @@ static struct resource au1200_lcd_resources[] = {
static struct resource au1200_ide0_resources[] = {
[0] = {
.start = AU1XXX_ATA_PHYS_ADDR,
.end = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN,
.end = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
......
......@@ -586,13 +586,14 @@ static int au_ide_probe(struct device *dev)
goto out;
}
if (!request_mem_region (res->start, res->end-res->start, pdev->name)) {
if (!request_mem_region(res->start, res->end - res->start + 1,
pdev->name)) {
pr_debug("%s: request_mem_region failed\n", DRV_NAME);
ret = -EBUSY;
goto out;
}
ahwif->regbase = (u32)ioremap(res->start, res->end-res->start);
ahwif->regbase = (u32)ioremap(res->start, res->end - res->start + 1);
if (ahwif->regbase == 0) {
ret = -ENOMEM;
goto out;
......@@ -677,7 +678,7 @@ static int au_ide_remove(struct device *dev)
iounmap((void *)ahwif->regbase);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, res->end - res->start);
release_mem_region(res->start, res->end - res->start + 1);
return 0;
}
......
......@@ -173,8 +173,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
#define AU1XXX_SMC91111_IRQ DB1200_ETH_INT
#define AU1XXX_ATA_PHYS_ADDR (0x18800000)
#define AU1XXX_ATA_PHYS_LEN (0x100)
#define AU1XXX_ATA_REG_OFFSET (5)
#define AU1XXX_ATA_REG_OFFSET (5)
#define AU1XXX_ATA_PHYS_LEN (16 << AU1XXX_ATA_REG_OFFSET)
#define AU1XXX_ATA_INT DB1200_IDE_INT
#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
#define AU1XXX_ATA_RQSIZE 128
......
......@@ -186,8 +186,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
#define AU1XXX_SMC91111_IRQ PB1200_ETH_INT
#define AU1XXX_ATA_PHYS_ADDR (0x0C800000)
#define AU1XXX_ATA_PHYS_LEN (0x100)
#define AU1XXX_ATA_REG_OFFSET (5)
#define AU1XXX_ATA_REG_OFFSET (5)
#define AU1XXX_ATA_PHYS_LEN (16 << AU1XXX_ATA_REG_OFFSET)
#define AU1XXX_ATA_INT PB1200_IDE_INT
#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
#define AU1XXX_ATA_RQSIZE 128
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册