- 05 11月, 2007 18 次提交
-
-
由 Mike Isely 提交于
The pvrusb2 driver's sysfs implementation had long since implemented a dummy hotplug function because at the time the kernel would oops without at least the empty function being present. Today - after numerous class interface changes in the kernel - this pvrusb2 change had been dutifully carried forward but an inspection of the kernel sources shows that it is no longer needed. So remove the dummy function and its reference. This also solves a recurring backwards compatibility issue in the pvrusb2 driver as the class interface has been getting thrashed in the kernel. Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Roel Kluin 提交于
if(!x & y) should either be if(!(x & y)) or if(!x && y) I made changes as seemed appropriate, but please review this is against current git. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Birr 提交于
Fixes the signal strength value (higher value = higher signal strength) and scales the value to the range of 0..ffff. The characteristic itself is wrong. To get proper values on a TT-C2300 in the range of 40..60% real signal strength, the values from the patch should be divide by two. The attached patch doesn't fix the characteristic. Signed-off-by: NHartmut Birr <e9hack@googlemail.com> Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Birr 提交于
Fix reported signal strength value (higher value = higher signal strength). Signed-off-by: NHartmut Birr <e9hack@googlemail.com> Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hartmut Birr 提交于
Bit error counting fixed for the tda10021. Signed-off-by: NHartmut Birr <e9hack@googlemail.com> Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Oliver Endriss 提交于
Change the acquisition range for clock recovery from 120 ppm to 240ppm. Apparently, some cable providers in Germany are playing with their parameters, and the capture range of the ves1820 is too small to acquire a lock with the current setting... ;-( Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Oliver Endriss 提交于
Two fixes for the 'saa7146_wait_for_debi_done' code: (a) Timeout did not work when the routine was called with interrupts disabled. (b) Reduce PCI I/O load caused by saa7146_wait_for_debi_done. Seems to be very important on fast machines! Based on code posted by Hartmut Birr @vdr-portal. Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Randy Dunlap 提交于
All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Randy Dunlap 提交于
Media ir-functions uses input_(*) functions so it should depend on the INPUT config symbol. drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
This patch fixes CONFIG_TUNER_TEA5761=m broken by commit ca805d57. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jeff Garzik 提交于
irq handlers have returned a return value for years now... catch up with the times. Also, ditch unneeded prototype. Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 hermann pitton 提交于
saa7134: fix analog audio in on medion md8800 quadro, aka CTX944 Signed-off-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
Semicolon fix. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
This patch enables QAM Annex-B support (US digital cable) for the s5h1409 VSB/QAM demodulator. Tested successfully with the mt2131 tuner, present on the following supported boards: Hauppauge WinTV-HVR-1250 Hauppauge WinTV-HVR-1800 Hauppauge WinTV-HVR-1800lp This patch is also known to work with an upcoming XC5000 tuner driver. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jonathan Corbet 提交于
Add a pointer to the (recently posted) Cafe data sheet. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jonathan Corbet 提交于
If the system is suspended while the camera is streaming, it will not continue streaming on resume. Save the state properly so that resume works. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The V4L1 spec says that the image size should be with with VIDIOCSWIN before requesting buffers with VIDIOCGMBUF and capturing into them with VIDIOCMCAPTURE. But it seems that many apps don't do this. They set the size using the fields in the VIDIOCMCAPTURE ioctl. The driver doesn't know what size to capture until it actually starts to capture. In particular, it doesn't know what size to capture until it has already mmap the captured buffers. Which is quite stupid. Why V4L1 has size and format fields for VIDIOCMCAPTURE I have no idea. Many drivers don't support this, including those using v4l1-compat. The bttv does, which is probably the only reason such broken software is so prevalent. But, the driver doesn't adjust its idea of what size is being captured when it is set this way. If you try to query the driver's current setting with v4l2-ctl, it won't be correct. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The bttv driver instists that the depth specified in the call to VIDIOCSPICT match the pixel format specified in the same call. vlc doesn't set the depth field, which makes the SPICT ioctl always fail. The V4L1 standard is not clear on how most operation are supposed to work, and this is no exception. The depth field would appear to be entirely redundant, as the pixel format specifies a specific depth. It could be that this field was only meant for output from the *G*PICT ioctl and should be ignored in *S*PICT. This is in fact what the v4l1-compat wrapper does. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 02 11月, 2007 1 次提交
-
-
由 Adrian Bunk 提交于
Not architecture specific code should not #include <asm/scatterlist.h>. This patch therefore either replaces them with #include <linux/scatterlist.h> or simply removes them if they were unused. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 31 10月, 2007 1 次提交
-
-
由 David Miller 提交于
It is referenced both from __devinit code (ivtv_probe) and normal .text (ivtv_process_eeprom), and therefore cannot be discarded via __devexit. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 10月, 2007 2 次提交
-
-
由 Jens Axboe 提交于
Most drivers need to set length and offset as well, so may as well fold those three lines into one. Add sg_assign_page() for those two locations that only needed to set the page, where the offset/length is set outside of the function context. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Ralf Baechle 提交于
Commits 58b053e4 ("Update arch/ to use sg helpers") 45711f1a ("[SG] Update drivers to use sg helpers") fa05f128 ("Update net/ to use sg helpers") converted many files to use the scatter gather helpers without ensuring that the necessary headerfile <linux/scatterlist> is included. This happened to work for ia64, powerpc, sparc64 and x86 because they happened to drag in that file via their <asm/dma-mapping.h>. On most of the others this probably broke. Instead of increasing the header file spider web I choose to include <linux/scatterlist.h> directly into the affectes files. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 10月, 2007 1 次提交
-
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 22 10月, 2007 17 次提交
-
-
由 Matthias Schwarzott 提交于
Calling saa7134_ir_stop at suspend is no good idea for saa7134 cards without remote control. Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ian Armstrong 提交于
Due to changes in the core ivtv driver as of release 1.0, the osd_compat module option has been rendered obsolete. This patch removes the option and all code associated with it. Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Pedro 提交于
improve GoTView PCI7135 remote control working under linux. Acked-by: NHermann Pitton <hermann-pitton@arcor.de> Acked-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NEugene M. Roginskii <roginovicci@nm.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
As for most of the users the 1.10 firmware is an improvement we should use this firmware always now. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mike Isely 提交于
This is a minor change to help with tracking the viability of the encoder chip within the PVR USB2 device. Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Marco Schluessler 提交于
Signed-off-by: NMarco Schluessler <marco@lordzodiac.de> Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Someone added a new case without adding a break to the one before it. Thanks to Margus <b-berski at mbox200 dot swipnet dot se> for spotting this. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Florin Malita 提交于
Coverity (CID 1929) spotted the following: if a transfer buffer allocation fails, the last allocated urb is leaked (it hasn't been stored in dev->urb[] yet so em28xx_uninit_isoc misses it). The patch also includes a small typo fix. Signed-off-by: NFlorin Malita <fmalita@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
When the radio is active the video should be muted when a capture starts. However, this was done at the wrong time and the mute settings were overwritten when cx2341x_update was called. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ian Armstrong 提交于
If the ivtvfb module isn't loaded, the valid YUV output area should be set to full-screen. This patch fixes the case where the valid output area was not reset when the output broadcast format was changed from NTSC to PAL. This resulted in output being limited to the top 480 lines of the display. Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ian Armstrong 提交于
When the ivtvfb module is loaded, the YUV output is relative to the framebuffer output. When a virtual screen size is used, the output area for the YUV may actually be off screen. To prevent the hardware from crashing, the current driver will ignore an off-screen position and leave the output visible at the last on-screen position. This may not be desirable, so this patch will switch off the YUV output should the image move off-screen, and re-enable it should the image move on-screen again. Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Prevent unloading the framebuffer if it is still in use. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
If you try to access the video device from within an udev rule, then you get into a circular locking situation. Changed the driver to postpone the registration of the devices until everything else has been fully initialized, so that the newly created device can be used immediately. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Resizing an MPEG 1 stream would cut off the right half of the image due to a missing divide by 2 in VIDIOC_S_FMT. Also did some minor cleanup in this part of the code. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ian Armstrong 提交于
This patch partially reverts a previous change that caused the CX2341X_OSD_SET_PIXEL_FORMAT firmware calls to be skipped when the pixel format of the framebuffer wasn't altered by FBIOPUT_VSCREENINFO. Unfortunately, another firmware call on the PVR350 sometimes scrambles the display when trying to adjust the framebuffer settings. This patch re-enables the CX2341X_OSD_SET_PIXEL_FORMAT calls to try and prevent this from occurring. Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Thanks-to: Martin Dauskardt <md001@gmx.de> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-