- 05 2月, 2010 13 次提交
-
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Nicolas Pitre 提交于
... and replace misuse of arch_reset() with arm_machine_restart(). Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Zhu Qingsen 提交于
Signed-off-by: NZhu Qingsen <zhuqs@cn.fujitsu.com> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Alexander Clouter 提交于
Inspired by the mach-ep93xx flattening work, there is really not much difference between the OpenRD base and client board support so they should be merged together. Signed-off-by: NAlexander Clouter <alex@digriz.org.uk> Acked-by: NSimon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
-
由 H Hartley Sweeten 提交于
The (void *) cast is not needed when setting dev.platform_data to the address of the data. Remove the casts. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 H Hartley Sweeten 提交于
The (void *) cast is not needed when setting dev.platform_data to the address of the data. Remove the casts. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 H Hartley Sweeten 提交于
The (void *) cast is not needed when setting dev.platform_data to the address of the data. Remove the casts. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Fix wrong register in proc-arm6_7.S data abort handler ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptions ARM: 5904/1: ARM: Always generate the IT instruction when compiling for Thumb-2 ARM: 5907/1: ARM: Fix the reset on the RealView PBX Development board mx35: add a missing comma in a pad definition mx25: make the FEC AHB clk secondary of the IPG mx25: fix time accounting mx25: properly initialize clocks mx25: remove unused mx25_clocks_init() argument i.MX25: implement secondary clocks for uarts and fec i.MX25: Allow secondary clocks in DEFINE_CLOCK ARM: MX3: Fixed typo in declared enum type name. MXC: Add AUDMUXv2 register decode to debugfs mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module mx31ads: Provide a name for EXPIO interrupt chip mx31ads: Allow enable/disable of switchable supplies
-
由 Linus Torvalds 提交于
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: Disable serial port autoidle by default omap: Fix access to already released memory in clk_debugfs_register_one() omap: Fix arch/arm/mach-omap2/mux.c: Off by one error omap: Fix 3630 mux errors OMAP2/3: GPMC: ensure valid clock pointer OMAP2/3: IRQ: ensure valid base address ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP omap: Remove old unused defines for OMAP_32KSYNCT_BASE omap: define _toggle_gpio_edge_triggering only for OMAP1
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Don't clobber the attribute type in nfs_update_inode() NFS: Fix a umount race NFS: Fix an Oops when truncating a file NFS: Ensure that we handle NFS4ERR_STALE_STATEID correctly NFSv4.1: Don't call nfs4_schedule_state_recovery() unnecessarily NFSv4: Don't allow posix locking against servers that don't support it NFSv4: Ensure that the NFSv4 locking can recover from stateid errors NFS: Avoid warnings when CONFIG_NFS_V4=n NFS: Make nfs_commitdata_release static NFS: Try to commit unstable writes in nfs_release_page() NFS: Fix a reference leak in nfs_wb_cancel_page()
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Handle futex value corruption gracefully futex: Handle user space corruption gracefully futex_lock_pi() key refcnt fix softlockup: Add sched_clock_tick() to avoid kernel warning on kgdb resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Extend umount wait coverage to full glock lifetime GFS2: Wait for unlock completion on umount
-
由 Tejun Heo 提交于
Commit 859ddf09 tried to fix misallocation bug but broke full bit marking by not clearing pa[idp->layers] and also is causing X failures due to lookup failure in drm code. The cause of the latter hasn't been found yet. Revert the fix for now. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 2月, 2010 11 次提交
-
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: fix interrupt state restore microblaze: Defconfig update
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: saa7146: stop DMA before de-allocating DMA scatter/gather page buffers V4L/DVB: saa7134: remove stray unlock_kernel
-
由 Tony Lindgren 提交于
Currently the omap serial clocks are autoidled after 5 seconds. However, this causes lost characters on the serial ports. As this is considered non-standard behaviour for Linux, disable the timeout. Note that this will also cause blocking of any deeper omap sleep states. To enable the autoidling of the serial ports, do something like this for each serial port: # echo 5 > /sys/devices/platform/serial8250.0/sleep_timeout # echo 5 > /sys/devices/platform/serial8250.1/sleep_timeout ... Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Marek Skuczynski 提交于
I have found an access to already released memory in clk_debugfs_register_one() function. Signed-off-by: NMarek Skuczynski <mareksk7@gmail.com> Acked-by: NPaul Walmsley <paul@pwsan.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
David Binderman ran the sourceforge tool cppcheck over the source code of the new Linux kernel 2.6.33-rc6: [./arm/mach-omap2/mux.c:492]: (error) Buffer access out-of-bounds 13 characters + 1 digit + 1 zero byte is more than 14 characters. Also add a comment on mode0 name length in case new omaps start using longer names. Reported-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
3630 has more mux signals than 34xx. The additional pins exist in omap36xx_cbp_subset, but are not initialized as the superset is missing these offsets. This causes the following errors during the boot: mux: Unknown entry offset 0x236 mux: Unknown entry offset 0x22e mux: Unknown entry offset 0x1ec mux: Unknown entry offset 0x1ee mux: Unknown entry offset 0x1f4 mux: Unknown entry offset 0x1f6 mux: Unknown entry offset 0x1f8 mux: Unknown entry offset 0x1fa mux: Unknown entry offset 0x1fc mux: Unknown entry offset 0x22a mux: Unknown entry offset 0x226 mux: Unknown entry offset 0x230 mux: Unknown entry offset 0x22c mux: Unknown entry offset 0x228 Fix this by adding the missing offsets to omap3 superset. Note that additionally the uninitialized pins need to be skipped on 34xx. Based on an earlier patch by Allen Pais <allen.pais@ti.com>. Reported-by: NAllen Pais <allen.pais@ti.com> Signed-off-by: NAllen Pais <allen.pais@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Kevin Hilman 提交于
Ensure valid clock pointer during GPMC init. Fixes compiler warning about potential use of uninitialized variable. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Kevin Hilman 提交于
Ensure valid base address during IRQ init. Fixes compiler warning about potential use of uninitialized variable. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Sriram 提交于
OMAP platforms(like OMAP3530) include DSP or other co-processors for media acceleration. when carving out memory for the accelerators we can end up creating a hole in the memory map of sort: <kernel memory><hole(memory for accelerator)><kernel memory> To handle such a memory configuration ARCH_HAS_HOLES_MEMORYMODEL has to be enabled. For further information refer discussion at: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html. Signed-off-by: NSriramakrishnan <srk@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Remove old unused defines for OMAP_32KSYNCT_BASE Signed-off-by: NTony Lindgren <tony@atomide.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix potential leak of dirty data on umount
-
- 03 2月, 2010 16 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Thomas Gleixner 提交于
The WARN_ON in lookup_pi_state which complains about a mismatch between pi_state->owner->pid and the pid which we retrieved from the user space futex is completely bogus. The code just emits the warning and then continues despite the fact that it detected an inconsistent state of the futex. A conveniant way for user space to spam the syslog. Replace the WARN_ON by a consistency check. If the values do not match return -EINVAL and let user space deal with the mess it created. This also fixes the missing task_pid_vnr() when we compare the pi_state->owner pid with the futex value. Reported-by: NJermome Marchand <jmarchan@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NDarren Hart <dvhltc@us.ibm.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org>
-
由 Thomas Gleixner 提交于
If the owner of a PI futex dies we fix up the pi_state and set pi_state->owner to NULL. When a malicious or just sloppy programmed user space application sets the futex value to 0 e.g. by calling pthread_mutex_init(), then the futex can be acquired again. A new waiter manages to enqueue itself on the pi_state w/o damage, but on unlock the kernel dereferences pi_state->owner and oopses. Prevent this by checking pi_state->owner in the unlock path. If pi_state->owner is not current we know that user space manipulated the futex value. Ignore the mess and return -EINVAL. This catches the above case and also the case where a task hijacks the futex by setting the tid value and then tries to unlock it. Reported-by: NJermome Marchand <jmarchan@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NDarren Hart <dvhltc@us.ibm.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org>
-
由 Mikael Pettersson 提交于
This fixes a futex key reference count bug in futex_lock_pi(), where a key's reference count is incremented twice but decremented only once, causing the backing object to not be released. If the futex is created in a temporary file in an ext3 file system, this bug causes the file's inode to become an "undead" orphan, which causes an oops from a BUG_ON() in ext3_put_super() when the file system is unmounted. glibc's test suite is known to trigger this, see <http://bugzilla.kernel.org/show_bug.cgi?id=14256>. The bug is a regression from 2.6.28-git3, namely Peter Zijlstra's 38d47c1b "[PATCH] futex: rely on get_user_pages() for shared futexes". That commit made get_futex_key() also increment the reference count of the futex key, and updated its callers to decrement the key's reference count before returning. Unfortunately the normal exit path in futex_lock_pi() wasn't corrected: the reference count is incremented by get_futex_key() and queue_lock(), but the normal exit path only decrements once, via unqueue_me_pi(). The fix is to put_futex_key() after unqueue_me_pi(), since 2.6.31 this is easily done by 'goto out_put_key' rather than 'goto out'. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NDarren Hart <dvhltc@us.ibm.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org>
-
由 Trond Myklebust 提交于
If the NFS_ATTR_FATTR_TYPE field isn't set in fattr->valid, then we should not set the S_IFMT part of inode->i_mode. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Ensure that we unregister the bdi before kill_anon_super() calls ida_remove() on our device name. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
由 Trond Myklebust 提交于
The VM/VFS does not allow mapping->a_ops->invalidatepage() to fail. Unfortunately, nfs_wb_page_cancel() may fail if a fatal signal occurs. Since the NFS code assumes that the page stays mapped for as long as the writeback is active, we can end up Oopsing (among other things). The only safe fix here is to convert nfs_wait_on_request(), so as to make it uninterruptible (as is already the case with wait_on_page_writeback()). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
由 Steven J. Magnani 提交于
Interrupts must be disabled while an interrupt state restore (prep for interrupt return) is in progress. Code to do this was lost in the port to the mainline kernel. Signed-off-by: NSteven J. Magnani <steve@digidescorp.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Steven Whitehouse 提交于
Although all glocks are, by the time of the umount glock wait, scheduled for demotion, some of them haven't made it far enough through the process for the original set of waiting code to wait for them. This extends the ref count to the whole glock lifetime in order to ensure that the waiting does catch all glocks. It does make it a bit more invasive, but it seems the only sensible solution at the moment. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This patch adds a wait on umount between the point at which we dispose of all glocks and the point at which we unmount the lock protocol. This ensures that we've received all the replies to our unlock requests before we stop the locking. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Reported-by: NFabio M. Di Nitto <fdinitto@redhat.com>
-
由 Michal Simek 提交于
There were several changes in Microblaze defconfig that's why is good to update defconfigs. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: kernel/cred.c: use kmem_cache_free
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (23 commits) connector: Delete buggy notification code. be2net: use eq-id to calculate cev-isr reg offset Bluetooth: Use the control channel for raw HID reports Bluetooth: Add DFU driver for Atheros Bluetooth chipset AR3011 Bluetooth: Redo checks in IRQ handler for shared IRQ support Bluetooth: Fix memory leak in L2CAP Bluetooth: Remove double free of SKB pointer in L2CAP cdc_ether: Partially revert "usbnet: Set link down initially ..." be2net: Fix memset() arg ordering. bonding: bond_open error return value ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early ixgbe: set the correct DCB bit for pg tx settings igbvf: fix issue w/ mapped_as_page being left set after unmap drivers/net: ks8851_mll ethernet network driver be2net: Bug fix to support newer generation of BE ASIC starfire: clean up properly if firmware loading fails mac80211: fix NULL pointer dereference when ftrace is enabled netfilter: ctnetlink: fix expectation mask dump ipv6: conntrack: Add member of user to nf_ct_frag6_queue structure ath9k: fix eeprom INI values override for 2GHz-only cards ...
-
This is the counterpart to cba76717 ("pktcdvd: remove broken dev_t export of class devices"). Device is not registered using dev_t, so it should not be destroyed using device_destroy which looks up the device by dev_t. This will fail and adding the device again will fail with the "duplicate name" error. This is fixed using device_unregister instead of device_destroy. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Peter Osterlund <petero2@telia.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Shaohui Zheng 提交于
Newly added memory can not be accessed via /dev/mem, because we do not update the variables high_memory, max_pfn and max_low_pfn. Add a function update_end_of_memory_vars() to update these variables for 64-bit kernels. [akpm@linux-foundation.org: simplify comment] Signed-off-by: NShaohui Zheng <shaohui.zheng@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Li Haicheng <haicheng.li@intel.com> Reviewed-by: NWu Fengguang <fengguang.wu@intel.com> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anton Blanchard 提交于
init_fault_attr_entries() should be init_fault_attr_dentries(). cleanup_fault_attr_entries() should be cleanup_fault_attr_dentries(). Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-