Merge branch 'omap-fixes-for-linus' of...

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: Disable serial port autoidle by default
  omap: Fix access to already released memory in clk_debugfs_register_one()
  omap: Fix arch/arm/mach-omap2/mux.c: Off by one error
  omap: Fix 3630 mux errors
  OMAP2/3: GPMC: ensure valid clock pointer
  OMAP2/3: IRQ: ensure valid base address
  ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP
  omap: Remove old unused defines for OMAP_32KSYNCT_BASE
  omap: define _toggle_gpio_edge_triggering only for OMAP1

arch/arm/Kconfig

@@ -702,6 +702,7 @@ config ARCH_OMAP
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 

arch/arm/mach-omap2/gpmc.c

@@ -505,7 +505,7 @@ static void __init gpmc_mem_init(void)
 void __init gpmc_init(void)
 {
 	u32 l;
-	char *ck;
+	char *ck = NULL;
 
 	if (cpu_is_omap24xx()) {
 		ck = "core_l3_ck";
@@ -521,6 +521,9 @@ void __init gpmc_init(void)
 		l = OMAP44XX_GPMC_BASE;
 	}
 
+	if (WARN_ON(!ck))
+		return;
+
 	gpmc_l3_clk = clk_get(NULL, ck);
 	if (IS_ERR(gpmc_l3_clk)) {
 		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);

arch/arm/mach-omap2/irq.c

@@ -194,7 +194,7 @@ void __init omap_init_irq(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
-		unsigned long base;
+		unsigned long base = 0;
 		struct omap_irq_bank *bank = irq_banks + i;
 
 		if (cpu_is_omap24xx())
@@ -202,6 +202,8 @@ void __init omap_init_irq(void)
 		else if (cpu_is_omap34xx())
 			base = OMAP34XX_IC_BASE;
 
+		BUG_ON(!base);
+
 		/* Static mapping, never released */
 		bank->base_reg = ioremap(base, SZ_4K);
 		if (!bank->base_reg) {

arch/arm/mach-omap2/mux.c

@@ -486,7 +486,7 @@ int __init omap_mux_init_signal(char *muxname, int val)
 static inline void omap_mux_decode(struct seq_file *s, u16 val)
 {
 	char *flags[OMAP_MUX_MAX_NR_FLAGS];
-	char mode[14];
+	char mode[sizeof("OMAP_MUX_MODE") + 1];
 	int i = -1;
 
 	sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
@@ -553,6 +553,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
 		if (!m0_name)
 			continue;
 
+		/* REVISIT: Needs to be updated if mode0 names get longer */
 		for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
 			if (m0_name[i] == '\0') {
 				m0_def[i] = m0_name[i];
@@ -968,6 +969,13 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
 		}
 #endif
 
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)
+		if (!superset->muxnames || !superset->muxnames[0]) {
+			superset++;
+			continue;
+		}
+#endif
+
 		entry = omap_mux_list_add(superset);
 		if (!entry) {
 			printk(KERN_ERR "mux: Could not add entry\n");

arch/arm/mach-omap2/mux34xx.c

@@ -649,6 +649,53 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
 	_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
 		"uart3_tx_irtx", NULL, NULL, NULL,
 		"gpio_166", NULL, NULL, "safe_mode"),
+
+	/* Only on 3630, see omap36xx_cbp_subset for the signals */
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 

arch/arm/mach-omap2/serial.c

@@ -36,7 +36,13 @@
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
-#define DEFAULT_TIMEOUT (5 * HZ)
+/*
+ * NOTE: By default the serial timeout is disabled as it causes lost characters
+ * over the serial ports. This means that the UART clocks will stay on until
+ * disabled via sysfs. This also causes that any deeper omap sleep states are
+ * blocked. 
+ */
+#define DEFAULT_TIMEOUT 0
 
 struct omap_uart_state {
 	int num;
@@ -422,7 +428,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 	uart->timeout = DEFAULT_TIMEOUT;
 	setup_timer(&uart->timer, omap_uart_idle_timer,
 		    (unsigned long) uart);
-	mod_timer(&uart->timer, jiffies + uart->timeout);
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
 	omap_uart_smart_idle_enable(uart, 0);
 
 	if (cpu_is_omap34xx()) {

arch/arm/plat-omap/clock.c

@@ -391,7 +391,7 @@ static struct dentry *clk_debugfs_root;
 static int clk_debugfs_register_one(struct clk *c)
 {
 	int err;
-	struct dentry *d, *child;
+	struct dentry *d, *child, *child_tmp;
 	struct clk *pa = c->parent;
 	char s[255];
 	char *p = s;
@@ -423,7 +423,7 @@ static int clk_debugfs_register_one(struct clk *c)
 
 err_out:
 	d = c->dent;
-	list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+	list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
 		debugfs_remove(child);
 	debugfs_remove(c->dent);
 	return err;

arch/arm/plat-omap/gpio.c

@@ -750,6 +750,7 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 }
 #endif
 
+#ifdef CONFIG_ARCH_OMAP1
 /*
  * This only applies to chips that can't do both rising and falling edge
  * detection at once.  For all other chips, this function is a noop.
@@ -760,11 +761,9 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 	u32 l = 0;
 
 	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		break;
-#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
@@ -787,6 +786,7 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 
 	__raw_writel(l, reg);
 }
+#endif
 
 static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 {

arch/arm/plat-omap/omap_device.c

@@ -89,16 +89,6 @@
 #define USE_WAKEUP_LAT			0
 #define IGNORE_WAKEUP_LAT		1
 
-/* XXX this should be moved into a separate file */
-#if defined(CONFIG_ARCH_OMAP2420)
-# define OMAP_32KSYNCT_BASE		0x48004000
-#elif defined(CONFIG_ARCH_OMAP2430)
-# define OMAP_32KSYNCT_BASE		0x49020000
-#elif defined(CONFIG_ARCH_OMAP3430)
-# define OMAP_32KSYNCT_BASE		0x48320000
-#else
-# error Unknown OMAP device
-#endif
 
 /* Private functions */