Signed-off-by: NWilliam Markezana <william.markezana@meas-spec.com>
[Guenter Roeck - minor formatting changes]
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

GMT G762/763 fan speed PWM controller is connected directly to a fan
and performs closed-loop or open-loop control of the fan speed. Two
modes - PWM or DC - are supported by the chip. Introduced driver
provides various knobs to control the operations of the chip (via
sysfs interface). Specific characteristics of the system can be passed
either using board init code or via DT. Documentation for both the
driver and DT bindings are also provided.
Signed-off-by: NArnaud Ebalard <arno@natisbad.org>
Tested-by: NSimon Guinot <simon.guinot@sequanux.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Each of ST-Ericsson X500 chip set series consists of both ABX500 and DBX500
chips. This is ABX500 hwmon driver, where the abx500.c is a common layer for
all ABX500s, and the ab8500.c is specific for AB8500 chip. Under this designed
structure, other chip specific files can be added simply using the same common
layer abx500.c.
Signed-off-by: NHongbo Zhang <hongbo.zhang@linaro.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NAnton Vorontsov <anton@enomsg.org>

Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This driver will replace the w83627ehf driver for NCT6775F and NCT6776F,
and provides support for NCT6779D.

This patch provides support for voltage monitor attributes.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The adt7310/adt7320 is the SPI version of the adt7410/adt7420. The register map
layout is a bit different, i.e. the register addresses differ between the two
variants, but the bit layouts of the individual registers are identical. So both
chip variants can easily be supported by the same driver. The issue of non
matching register address layouts is solved by a simple look-up table which
translates the I2C addresses to the SPI addresses.

The patch moves the bulk of the adt7410 driver to a common module that will be
shared by the adt7410 and adt7310 drivers. This common module implements the
driver logic and uses a set of virtual functions to perform IO access. The
adt7410 and adt7310 driver modules provide proper implementations of these IO
accessor functions for I2C respective SPI.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Reviewed-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This driver uses channel maps, defined either through device tree
or platform data, to create a hwmon driver which acts as a client
for the underlying IIO device channels.  Thus a general purpose
IIO adc driver can be used to provide hardware monitoring using a subset
of its channels.
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>

--
 The only non move changes here concern the description and changes to the
 dependencies to IIO explicit and hwmon implicit.

 I'm proposing moving this into hwmon on the basis of placing drivers
 based on what they provide rather than what their underlying hardware
 is.

 drivers/hwmon/Kconfig           |   9 ++
 drivers/hwmon/Makefile          |   1 +
 drivers/hwmon/iio_hwmon.c       | 196 ++++++++++++++++++++++++++++++++++++++++
 drivers/staging/iio/Kconfig     |   8 --
 drivers/staging/iio/Makefile    |   2 -
 drivers/staging/iio/iio_hwmon.c | 196 ----------------------------------------
 6 files changed, 206 insertions(+), 206 deletions(-)

Add support for the TI / Burr-Brown INA209 voltage / current / power
monitor.

Cc: Paul Hays <haysp@magma.net>
Cc: Ira W. Snyder <iws@ovro.caltech.edu>
Tested-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Add support for MAX6581, MAX6602, MAX6622, MAX6636, MAX6689, MAX6693,
MAX6694, MAX6697, MAX6698, and MAX6699 temperature sensors
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NJean Delvare <khali@linux-fr.org>

This is the HWMON patch for DA9055 PMIC and has got dependency on the
DA9055 MFD core.

This patch monitors the DA9055 PMIC's ADC channels vddout, junction temperature
and auxiliary channels.

This patch is functionally tested on Samsung SMDKV6410.
Signed-off-by: NDavid Dajun Chen <dchen@diasemi.com>
Signed-off-by: NAshish Jangam <ashish.jangam@kpitcummins.com>
[Guenter Roeck: Dropped __devinit, __devexit, __devexit_p]
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

hwmon framework driver for Versatile Express sensors, providing
information about board level voltage (only when regulator driver
is not configured), currents, temperature and power/energy usage.
Labels for the values can be defined as DT properties.
Signed-off-by: NPawel Moll <pawel.moll@arm.com>
Acked-by: NGuenter Roeck <linux@roeck-us.net>

This movement is needed because the hwmon entries and corresponding sysfs
interface is a duplicate of utilities already provided by
driver/thermal/thermal_sys.c.  The goal is to place it in thermal folder
and add necessary functions to use the in-kernel thermal interfaces.
Signed-off-by: NAmit Daniel Kachhap <amit.kachhap@linaro.org>
Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: SangWook Ju <sw.ju@samsung.com>
Cc: Durgadoss <durgadoss.r@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

The MAX197 is an A/D converter, made by Maxim. This driver currently
supports the MAX197, and MAX199. They are both 8-Channel, Multi-Range,
5V, 12-Bit DAS with 8+4 Bus Interface and Fault Protection.

The available ranges for the MAX197 are {0,-5V} to 5V, and {0,-10V} to
10V, while they are {0,-2V} to 2V, and {0,-4V} to 4V on the MAX199.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This patch brings basic support for the Analog Devices ADT7410 temperature
sensor. The following functionality has been implemented:

  * get current temperature
  * get/set minimum, maximum and critical temperature
  * get/set hysteresis
  * get alarm events for minimum, maximum and critical temperature

All implemented sysfs attributes have been sucessfully tested at temperatures
of 15°C to 40°C.
Signed-off-by: NHartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

This is a new driver for the Honeywell Humidicon HIH-6130/HIH-6131 humidity sensor.

The driver is based on the existing Sensiron sht21 driver with the necessary changes
to the probe, update_measurements and conversion functions necessary to use the
Honeywell sensors.

There's no difference between the 6130 & 6131 other than the 6131 having an external
condensation filter attached.
Signed-off-by: NIain Paton <ipaton0@gmail.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The DA9052 PMIC provides an Analogue to Digital Converter with 10 bits
resolution and 10 channels.

This patch monitors the DA9052 PMIC's ADC channels mostly for battery
parameters like battery temperature, junction temperature, battery
current etc.

This patch is functionally tested on Samsung SMDKV6410
Signed-off-by: NDavid Dajun Chen <dchen@diasemi.com>
Signed-off-by: NAshish Jangam <ashish.jangam@kpitcummins.com>
[Guenter Roeck: __init --> __devinit for probe function]
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Add support for the Texas Instruments INA219 and INA226 power monitors.
Signed-off-by: NLothar Felten <l-felten@ti.com>
[guenter.roeck@ericsson.com: formatting cleanup; check for smbus word data;
 select PGA=8 for INA219]
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

Add I2C driver for MCP3021 that is an ADC chip from Microchip.
The MCP3021 is a successive approximation A/D converter (ADC)
with 10-bit resolution.
The driver export the value of Vin to sysfs, the voltage unit is
mV. Through the sysfs interface, lm-sensors tool can also display
Vin voltage.
Signed-off-by: NMingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: NXie Xiaobo <X.Xie@freescale.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Driver for AD7314, ADT7301, and ADT7302, ported from IIO.

Currently dropped power down mode support.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
[guenter.roeck@ericsson.com: Added MODULE_DEVICE_TABLE]
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

This patch allows to read temperature
from TMU(Thermal Management Unit) of SAMSUNG EXYNOS4 series of SoC.
Signed-off-by: NDonggeun Kim <dg77.kim@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

Since the number of PMBus drivers is getting large, move them into
directory drivers/hwmon/pmbus to improve readability and scalability.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: NRobert Coulson <robert.coulson@ericsson.com>

A hwmon driver for the National Semiconductor LM95245 dual temperature
sensors chip.
Signed-off-by: NAlexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

Add support for NTC Thermistor series. In this release, the
following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473,
and NCP15WL333. This driver is based on the datasheet of MURATA.

The driver in the patch does conversion from the raw ADC value
(either voltage or resistence) to temperature. In order to use
voltage values as input, the circuit schematics should be provided
with the platform data. A compensation table for each type of thermistor
is provided for the conversion.
Signed-off-by: NDonggeun Kim <dg77.kim@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungMin Park <kyungmin.park@samsung.com>
Reviewed-by: NShubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

This patch adds support for MAX1668 and compatible temperature sensors.
Signed-off-by: NDavid George <david.george@ska.ac.za>
[guenter.roeck@ericsson.com: minor cleanup of probe error path]
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

This patch adds a new driver for SMSC SCH5636 Super I/O chips.
The chips include an embedded microcontroller for hardware monitoring
solutions, allowing motherboard manufacturers to create their own
custom hwmon solution based upon the SCH5636.

Currently the sch5636 driver only supports the Fujitsu Theseus SCH5636
based hwmon solution. The sch5636 driver runs a sanity check on
loading to ensure it is dealing with a Fujitsu Theseus and not with
another custom SCH5636 based hwmon solution.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This patch adds a new sch56xx-common.ko which contains code which will also
be used in the new sch5636 driver.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This is a new driver for the SMSC EMC6W201 hardware monitoring device.
The device is functionally close to the EMC6D100 series, but is
register-incompatible.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NHarry G McGavran Jr <w5pny@arrl.net>
Tested-by: NJeff Rickman <jrickman@myamigos.us>
Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>

As discussed earlier, the ACPI power meter driver would better live
in drivers/hwmon, as its only purpose is to create hwmon-style
interfaces for ACPI 4.0 power meter devices. Users are more likely to
look for it there, and less likely to accidentally hide it by
unselecting its dependencies.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: N"Darrick J. Wong" <djwong@us.ibm.com>
Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: Len Brown <lenb@kernel.org>

This CPU family provides NB register values to gather following
TDP information

* ProcessorPwrWatts: Specifies in Watts the maximum amount of power
  the processor can support.
* CurrPwrWatts: Specifies in Watts the current amount of power being
  consumed by the processor.

This driver provides

* power1_crit (ProcessorPwrWatts)
* power1_input (CurrPwrWatts)
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

After the merge of pkgtemp functionality into the coretemp driver,
the pkgtemp driver is no longer necessary. Remove it.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: NJean Delvare <khali@linux-fr.org>

Add support for Analog Devices ADM1275 Hot-Swap Controller and Digital Power
Monitor
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: NTom Grennan <tom.grennan@ericsson.com>

Hardware monitoring support for TI UCD90120, UCD90124, UCD9090, and UCD90910
Sequencer and System Health Controllers.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: NTom Grennan <tom.grennan@ericsson.com>

This patch adds hardware monitoring support for TI UCD9220, UCD9222, UCD9224,
UCD9240, UCD9244, UCD9246, and UCD9248 Digital PWM System Controllers.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: NTom Grennan <tom.grennan@ericsson.com>

This patch adds hardware monitoring support for Maxim MAX16065, MAX16066,
MAX16067, MAX16068, MAX16070, and MAX16071 flash-configurable system managers
with nonvolatile fault registers.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: NJean Delvare <khali@linux-fr.org>

MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with
Overtemperature Alarm from Maxim.
Signed-off-by: NPer Dalen <per.dalen@appeartv.com>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

This driver exposes the sysfs nodes of the TWL4030 MADC module.
All the voltage channel values are expressed in terms of mV. Channel 13
and channel 14 are reserved. There are channels which represent
temperature and current the output is represented by celcius
and mA respectively.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Signed-off-by: NDirk Eibach <eibach@gdsys.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

SMSC SCH5627 Super I/O chips include complete hardware monitoring
capabilities. They can monitor up to 5 voltages, 4 fans and 8
temperatures.

The hardware monitoring part of the SMSC SCH5627 is accessed by talking
through an embedded microcontroller. An application note describing the
protocol for communicating with the microcontroller is available upon
request. Please mail me if you want a copy.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The lis3lv02d drivers aren't hardware monitoring drivers, so the don't
belong to drivers/hwmon. Move them to drivers/misc, short of a better
home.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Acked-by: NEric Piel <eric.piel@tremplin-utc.net>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Tested-by: NEric Piel <eric.piel@tremplin-utc.net>
Tested-by: NTakashi Iwai <tiwai@suse.de>

The hp_accel driver isn't a hardware monitoring driver, so it doesn't
belong to drivers/hwmon. Move it to drivers/platform/x86, assuming HP
doesn't ship non-x86 laptops.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Acked-by: NEric Piel <eric.piel@tremplin-utc.net>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Tested-by: NEric Piel <eric.piel@tremplin-utc.net>
Tested-by: NTakashi Iwai <tiwai@suse.de>