- 03 2月, 2008 2 次提交
-
-
由 Paulius Zaleckas 提交于
Signed-off-by: NPaulius Zaleckas <pauliusz@yahoo.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Robert P. J. Day 提交于
Correct the obvious "copy and paste" errors explaining some of the "find_next" routines. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
- 02 2月, 2008 23 次提交
-
-
由 Rafael J. Wysocki 提交于
swsusp_pg_dir[] is used for suspend, but not for hibernation. clean-up the ifdefs which worked by accident, while implying the opposite. Delete the __nosavedata, which also implied the opposite. Some day we may optimize CONFIG_ACPI_SLEEP to build minimal kernels for just hibernate or just suspend but not both, but today isn't that day. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Borislav Petkov 提交于
There's a freakishly long comment in suspend_64.c, shorten it. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Johannes Berg 提交于
This patch makes the freezer optional for suspend to allow the system to work (or not work) like the original PMU suspend. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Rafael J. Wysocki 提交于
On ACPI systems the target state set by acpi_pm_set_target() is reset by acpi_pm_finish(), but that need not be called if the suspend fails. All platforms that use the .set_target() global suspend callback are affected by analogous issues. For this reason, we need an additional global suspend callback that will reset the target state regardless of whether or not the suspend is successful. Also, it is reasonable to rename the .set_target() callback, since it will be used for a different purpose on ACPI systems (due to ACPI 1.0x code ordering requirements). Introduce the global suspend callback .end() to be executed at the end of the suspend sequence and rename the .set_target() global suspend callback to .begin(). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Johannes Berg 提交于
This cleans up the suspend Kconfig and removes the need to declare centrally which architectures support suspend. All architectures that currently support suspend are modified accordingly. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NRussell King <rmk@arm.linux.org.uk> Acked-by: NPaul Mackerras <paulus@samba.org> Acked-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NPaul Mundt <lethal@linux-sh.org> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Johannes Berg 提交于
This cleans up the hibernation Kconfig and removes the need to declare centrally which architectures support hibernation. All architectures that currently support hibernation are modified accordingly. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NPaul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 bjorn.helgaas@hp.com 提交于
Convert quirk printks to dev_printk(). Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
A HOWTO that hasn't been updated for half a dozen years no longer "contains valuable information about which PCI hardware does work under Linux and which doesn't". Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ingo Molnar 提交于
fix bootup crash in native_read_tsc() that was reported on an Athlon-XP and bisected. The correct feature boundary for X86_FEATURE_MFENCE_RDTSC is not XMM but XMM2. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dmitry Baryshkov 提交于
Use gpio_vbus instead of udc_is_connected for udc on tosa. Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alexander van Heukelum 提交于
Avoid section mismatch involving arch_register_cpu. Marking arch_register_cpu as __init and removing the export for non-hotplug-cpu configurations makes the following warning go away: Section mismatch in reference from the function arch_register_cpu() to the function .devinit.text:register_cpu() The function arch_register_cpu() references the function __devinit register_cpu(). This is often because arch_register_cpu lacks a __devinit annotation or the annotation of register_cpu is wrong. The only external user of arch_register_cpu in the tree is in drivers/acpi/processor_core.c where it is guarded by ACPI_HOTPLUG_CPU (which depends on HOTPLUG_CPU). Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> CC: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Harvey Harrison 提交于
Signedness mismatches in level argument. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Harvey Harrison 提交于
The casts will always be needed, may as well make them the right signedness. The ebx variables can easily be unsigned, may as well. arch/x86/kernel/cpu/common.c:261:21: warning: incorrect type in argument 2 (different signedness) arch/x86/kernel/cpu/common.c:261:21: expected unsigned int *eax arch/x86/kernel/cpu/common.c:261:21: got int *<noident> arch/x86/kernel/cpu/common.c:262:9: warning: incorrect type in argument 3 (different signedness) arch/x86/kernel/cpu/common.c:262:9: expected unsigned int *ebx arch/x86/kernel/cpu/common.c:262:9: got int *<noident> arch/x86/kernel/cpu/common.c:263:9: warning: incorrect type in argument 4 (different signedness) arch/x86/kernel/cpu/common.c:263:9: expected unsigned int *ecx arch/x86/kernel/cpu/common.c:263:9: got int *<noident> arch/x86/kernel/cpu/common.c:264:9: warning: incorrect type in argument 5 (different signedness) arch/x86/kernel/cpu/common.c:264:9: expected unsigned int *edx arch/x86/kernel/cpu/common.c:264:9: got int *<noident> arch/x86/kernel/cpu/common.c:293:30: warning: incorrect type in argument 3 (different signedness) arch/x86/kernel/cpu/common.c:293:30: expected unsigned int *ebx arch/x86/kernel/cpu/common.c:293:30: got int *<noident> arch/x86/kernel/cpu/common.c:350:22: warning: incorrect type in argument 2 (different signedness) arch/x86/kernel/cpu/common.c:350:22: expected unsigned int *eax arch/x86/kernel/cpu/common.c:350:22: got int *<noident> arch/x86/kernel/cpu/common.c:351:10: warning: incorrect type in argument 3 (different signedness) arch/x86/kernel/cpu/common.c:351:10: expected unsigned int *ebx arch/x86/kernel/cpu/common.c:351:10: got int *<noident> arch/x86/kernel/cpu/common.c:352:10: warning: incorrect type in argument 4 (different signedness) arch/x86/kernel/cpu/common.c:352:10: expected unsigned int *ecx arch/x86/kernel/cpu/common.c:352:10: got int *<noident> arch/x86/kernel/cpu/common.c:353:10: warning: incorrect type in argument 5 (different signedness) arch/x86/kernel/cpu/common.c:353:10: expected unsigned int *edx arch/x86/kernel/cpu/common.c:353:10: got int *<noident> arch/x86/kernel/cpu/common.c:362:30: warning: incorrect type in argument 3 (different signedness) arch/x86/kernel/cpu/common.c:362:30: expected unsigned int *ebx arch/x86/kernel/cpu/common.c:362:30: got int *<noident> Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Harvey Harrison 提交于
Not necessary to expose it, also fixes sparse warning. arch/x86/kernel/early_printk.c:196:16: warning: symbol 'early_console' was not declared. Should it be static? Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
Fix following warning: WARNING: arch/x86/kernel/built-in.o(.text+0x1eb41): Section mismatch in reference from the function calgary_handle_quirks() to the function .init.text:calgary_set_split_completion_timeout() calgary_handle_quirks() are only called at __init time (in calgary_init_one() via handle_quirks ops). So annotate this function and the sister function __init. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
Fix following warning: WARNING: o-x86_64/arch/x86/kernel/built-in.o(.text+0x13d15): Section mismatch in reference from the function acpi_map_lsapic() to the function .cpuinit.text:mp_register_lapic() The function acpi_map_lsapic() is exported and thus not annotated. But the sole user is acpi/processor_core.c in a __cpuinit path. So create a small wrapper and put back the annotation thus avoiding the warning. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
Fix the following warnings: WARNING: arch/x86/kernel/built-in.o(.exit.text+0xf8): Section mismatch in reference from the function msr_exit() to the variable .cpuinit.data:msr_class_cpu_notifier WARNING: arch/x86/kernel/built-in.o(.exit.text+0x158): Section mismatch in reference from the function cpuid_exit() to the variable .cpuinit.data:cpuid_class_cpu_notifier WARNING: arch/x86/kernel/built-in.o(.exit.text+0x171): Section mismatch in reference from the function microcode_exit() to the variable .cpuinit.data:mc_cpu_notifier In all three cases there were a function annotated __exit that referenced a variable annotated __cpuinitdata. The fix was to replace the annotation of the notifier with __refdata to tell modpost that the reference to a _cpuinit function in the notifier are OK. The unregister call that references the notifier variable will simple delete the function pointer so there is no problem ignoring the reference. Note: This looks like another case where __cpuinit has been used as replacement for proper use of CONFIG_HOTPLUG_CPU to decide what code are used for HOTPLUG_CPU. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
Silence the following warning: WARNING: o-x86_64/arch/x86/kernel/built-in.o(.text+0x17cd3): Section mismatch in reference from the function remove_cpu_from_maps() to the variable .cpuinit.data:cpu_initialized remove_cpu:maps() had a single user: __cpu_disable() so mark it static and annotate it with __ref to silence the warning from modpost. _cpu_disable() has a single user in kernel/cpu.c: => take_cpu_down() which again has a single user in the following call: => __stop_machine_run(take_cpu_down, &tcd_param, cpu); Here a kthread is created. So maybe the warning is correct and the right fix is to remove the __cpuinitdata annotation of cpu_initialized? Note: The analysis were disturbed by the fact that we had a variable with the same name in cpu/common.c - but this is 32 bit only] Note: Should smpboot_64 use cpu_clear()? Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
for bzImage, the vmlinux_64.lds still have s32 bit code, and startup_32 should be 0. fix the comment. Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
boot oopses when a system has 64 or 128 GB of RAM installed: Calling initcall 0xffffffff80bc33b6: sctp_init+0x0/0x711() BUG: unable to handle kernel NULL pointer dereference at 000000000000005f IP: [<ffffffff802bfe55>] proc_register+0xe7/0x10f PGD 0 Oops: 0000 [1] SMP CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.24-smp-g5a514e21-dirty #6 RIP: 0010:[<ffffffff802bfe55>] [<ffffffff802bfe55>] proc_register+0xe7/0x10f RSP: 0000:ffff810824c57e60 EFLAGS: 00010246 RAX: 000000000000d7d7 RBX: ffff811024c5fa80 RCX: ffff810824c57e08 RDX: 0000000000000000 RSI: 0000000000000195 RDI: ffffffff80cc2460 RBP: ffffffffffffffff R08: 0000000000000000 R09: ffff811024c5fa80 R10: 0000000000000000 R11: 0000000000000002 R12: ffff810824c57e6c R13: 0000000000000000 R14: ffff810824c57ee0 R15: 00000006abd25bee FS: 0000000000000000(0000) GS:ffffffff80b4d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 000000000000005f CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff810824c56000, task ffff812024c52000) Stack: ffffffff80a57348 0000019500000000 ffff811024c5fa80 0000000000000000 00000000ffffff97 ffffffff802bfef0 0000000000000000 ffffffffffffffff 0000000000000000 ffffffff80bc3b4b ffff810824c57ee0 ffffffff80bc34a5 Call Trace: [<ffffffff802bfef0>] ? create_proc_entry+0x73/0x8a [<ffffffff80bc3b4b>] ? sctp_snmp_proc_init+0x1c/0x34 [<ffffffff80bc34a5>] ? sctp_init+0xef/0x711 [<ffffffff80b976e3>] ? kernel_init+0x175/0x2e1 [<ffffffff8020ccf8>] ? child_rip+0xa/0x12 [<ffffffff80b9756e>] ? kernel_init+0x0/0x2e1 [<ffffffff8020ccee>] ? child_rip+0x0/0x12 Code: 1e 48 83 7b 38 00 75 08 48 c7 43 38 f0 e8 82 80 48 83 7b 30 00 75 08 48 c7 43 30 d0 e9 82 80 48 c7 c7 60 24 cc 80 e8 bd 5a 54 00 <48> 8b 45 60 48 89 6b 58 48 89 5d 60 48 89 43 50 fe 05 f5 25 a0 RIP [<ffffffff802bfe55>] proc_register+0xe7/0x10f RSP <ffff810824c57e60> CR2: 000000000000005f ---[ end trace 02c2d78def82877a ]--- Kernel panic - not syncing: Attempted to kill init! it turns out some variables near end of bss are corrupted already. in System.map we have ffffffff80d40420 b rsi_table ffffffff80d40620 B krb5_seq_lock ffffffff80d40628 b i.20437 ffffffff80d40630 b xprt_rdma_inline_write_padding ffffffff80d40638 b sunrpc_table_header ffffffff80d40640 b zero ffffffff80d40644 b min_memreg ffffffff80d40648 b rpcrdma_tk_lock_g ffffffff80d40650 B sctp_assocs_id_lock ffffffff80d40658 B proc_net_sctp ffffffff80d40660 B sctp_assocs_id ffffffff80d40680 B sysctl_sctp_mem ffffffff80d40690 B sysctl_sctp_rmem ffffffff80d406a0 B sysctl_sctp_wmem ffffffff80d406b0 b sctp_ctl_socket ffffffff80d406b8 b sctp_pf_inet6_specific ffffffff80d406c0 b sctp_pf_inet_specific ffffffff80d406c8 b sctp_af_v4_specific ffffffff80d406d0 b sctp_af_v6_specific ffffffff80d406d8 b sctp_rand.33270 ffffffff80d406dc b sctp_memory_pressure ffffffff80d406e0 b sctp_sockets_allocated ffffffff80d406e4 b sctp_memory_allocated ffffffff80d406e8 b sctp_sysctl_header ffffffff80d406f0 b zero ffffffff80d406f4 A __bss_stop ffffffff80d406f4 A _end and setup_node_bootmem() will use that page 0xd40000 for bootmap Bootmem setup node 0 0000000000000000-0000000828000000 NODE_DATA [000000000008a485 - 0000000000091484] bootmap [0000000000d406f4 - 0000000000e456f3] pages 105 Bootmem setup node 1 0000000828000000-0000001028000000 NODE_DATA [0000000828000000 - 0000000828006fff] bootmap [0000000828007000 - 0000000828106fff] pages 100 Bootmem setup node 2 0000001028000000-0000001828000000 NODE_DATA [0000001028000000 - 0000001028006fff] bootmap [0000001028007000 - 0000001028106fff] pages 100 Bootmem setup node 3 0000001828000000-0000002028000000 NODE_DATA [0000001828000000 - 0000001828006fff] bootmap [0000001828007000 - 0000001828106fff] pages 100 setup_node_bootmem() makes NODE_DATA cacheline aligned, and bootmap is page-aligned. the patch updates find_e820_area() to make sure we can meet the alignment constraints. Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
helps debugging problems in this rather murky area of code. Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Heiko Carstens 提交于
Change latencytop Kconfig entry so it doesn't list the archictectures that support it. Instead introduce HAVE_LATENCY_SUPPORT which any architecture can set. Should reduce patch conflicts. Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Holger Wolf <wolf@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 01 2月, 2008 15 次提交
-
-
由 Thiemo Seufer 提交于
This patch moves the micro-assembler in a separate implementation, as it is useful for further run-time optimizations. The only change in behaviour is cutting down printk noise at kernel startup time. Checkpatch complains about macro parameters which aren't protected by parentheses. I believe this is a flaw in checkpatch, the paste operator used in those macros won't work with parenthesised parameters. Signed-off-by: NThiemo Seufer <ths@networkno.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Commit 312b1485 made __INIT_REFOK expand into .section .section ".ref.text", "ax". Since the assembler doesn't tolerate stuttering in the source that broke all MIPS builds. Since with this change Sam downgraded __INIT_REFOK the best fix is to get replace it by the modern days operator. With MIPS the only user of __INIT_REFOK and __INITDATA_REFOK (which was equally broken) being unused anyway these can be deleted but that's subject of a separate commit. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Steven Rostedt 提交于
Doing a make randconfig I came across this error in the Makefile. This patch makes a directory out of arch/x86/mach-default for CONFIG_X86_RDC321X Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Olof Johansson 提交于
[POWERPC] pasemi: Fix thinko in dma_direct_ops setup The first patch will just fall through and still set dma_data to a bad value, make it return directly instead. Signed-off-by: NOlof Johansson <olof@lixom.net> Acked-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Remove all the dead timer interrupt checking functions for the ColdFire CPU "timers" hardware that are not used after switching to GENERIC_TIME. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Switching to GENERIC_TIME means we no longer need the empty timer offset function for the 68360 CPU. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Remove unused local gettimeofday functions, now that we are using GENERIC_TIME. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Switch m68knommu arch to using GENERIC_TIME. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Switch the ColdFire TIMER timer to use GENERIC_TIME. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Switch the ColdFire PIT timer to using GENERIC_TIME. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Switch the 68328 CPU timer code to using GENERIC_TIME. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Remove unused LED heartbeat code from m68knommu timer code. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Move the ColdFire DMA address table into its own file, and out of each of the different CPU config files. No need to have a copy of it in each of the config setup files. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Modify Makefiles to support separate coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Move common ColdFire CPU vectors.c to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-