- 01 6月, 2013 1 次提交
-
-
由 Boris BREZILLON 提交于
This patch adds pinctrl configurations for at91 Timer Counter blocks. These pin definitions can be referenced by "atmel,tcb-pwm" devices to setup pins as PWM output for instance. Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com> [nicolas.ferre@atmel.com: switch to pinctrl pre-processor macros] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 31 5月, 2013 1 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 24 5月, 2013 1 次提交
-
-
由 Boris BREZILLON 提交于
The PA24 pin is wrongly assigned to peripheral B. In the current config there is 2 ETX3 pins (PA11 and PA24) and no ETXER pin (PA22). Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> # 3.8+
-
- 23 5月, 2013 1 次提交
-
-
由 Lorenzo Pieralisi 提交于
This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 17 5月, 2013 4 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
to prepare the switch to the macro. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 24 4月, 2013 2 次提交
-
-
由 Wenyou Yang 提交于
Signed-off-by: NWenyou Yang <wenyou.yang@atmel.com> Tested-by: NRichard Genoud <richard.genoud@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Richard Genoud 提交于
Signed-off-by: NRichard Genoud <richard.genoud@gmail.com> [wenyou.yang@atmel.com: add spi nodes for sam9260, sam9263, sam9g45 and sam9n12] [wenyou.yang@atmel.com: remove spi property "cs-gpios" to the board dts files] [wenyou.yang@atmel.com: submit the patch] Signed-off-by: NWenyou Yang <wenyou.yang@atmel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 4月, 2013 1 次提交
-
-
由 Douglas Gilbert 提交于
Signed-off-by: NDouglas Gilbert <dgilbert@interlog.com> [nicolas.ferre@atmel.com: fix rts/cts for usart3] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> [3.8+]
-
- 04 4月, 2013 1 次提交
-
-
由 Ludovic Desroches 提交于
Add the ADC low and high resolution configuration and which one to use. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 12 1月, 2013 1 次提交
-
-
由 Bo Shen 提交于
Add pinctrl support for SSC on AT91 dtsi files. Signed-off-by: NBo Shen <voice.shen@atmel.com> [nicolas.ferre@atmel.com: split dtsi and driver changes] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Reluctantly-acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 15 12月, 2012 1 次提交
-
-
由 Bo Shen 提交于
Change the value of status to disabled to keep the consistent Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 11月, 2012 2 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Ludovic Desroches 提交于
Add mci controller nodes to atmel SOCs. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 19 11月, 2012 3 次提交
-
-
as we just use the rts and not the rts & cts for rs485 Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
USART are the full pin uart DBGU the debug Unit UART the two pin uart Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 16 11月, 2012 1 次提交
-
-
由 Fabio Porcedda 提交于
Tested on an at91sam9260 board (evk-pro3). Signed-off-by: NFabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 07 11月, 2012 1 次提交
-
-
由 Bo Shen 提交于
Add atmel-ssc for device tree support Match "atmel,at91rm9200-ssc" for using pdc for data transfer Match "atmel,at91sam9g45-ssc" for using dma for data transfer Signed-off-by: NBo Shen <voice.shen@atmel.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 13 10月, 2012 4 次提交
-
-
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Fix also the reg size as we have 512 bytes bank not 256 bytes per gpio/mux controller Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 17 9月, 2012 1 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Tested-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 12 9月, 2012 1 次提交
-
-
由 Ludovic Desroches 提交于
Add TWI nodes for atmel SoCs but keep i2c-gpio ones in order to let the choice to the user in dts files. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
-
- 02 7月, 2012 2 次提交
-
-
由 Ludovic Desroches 提交于
Add a third cell to define irq priority. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Reviewed-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 18 5月, 2012 1 次提交
-
-
由 Nicolas Ferre 提交于
Now that the bulk of at91sam9g20-related nodes are located in at91sam9260.dtsi, we have to re-create the path to this ADC node for SoC specific parts. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 20 4月, 2012 1 次提交
-
-
The at91sam9260 and at91sam9g20 share most of the same IP. So udpate the node property in the at91sam9g20 only. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 15 4月, 2012 1 次提交
-
-
由 Rob Herring 提交于
These were incorrectly introduced and can cause problems for of_irq_init. The correct way to define a root controller is no interrupt-parent set at all or the interrupt-parent is set to the root controller itself when inherited from a parent node. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Tested-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 05 4月, 2012 1 次提交
-
-
由 Ludovic Desroches 提交于
Because of the inclusion of skeleton.dtsi, the memory node is named "memory" we where not modifying the already included one but creating a new one. It caused bad memory node detection during early_init_dt_scan_memory() so we modify them. Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: devicetree-discuss@lists.ozlabs.org
-
- 16 3月, 2012 2 次提交
-
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: devicetree-discuss@lists.ozlabs.org
-
- 15 3月, 2012 5 次提交
-
-
Use a string to specific the wakeup mode to make it more readable. Add the Real-time Clock Wake-up support too for sam9g45 and sam9x5. Add AT91_SHDW_CPTWK0_MAX to specific the Max of the Wakeup Counter. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
We can now drop the call to ioremap_registers() as we have the binding for the SDRAM/DDR Controller. Drop ioremap_registers() for sam9x5 too. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Specified the main Oscillator via clock binding. This will allow to do not hardcode it anymore in the DT board at 12MHz. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
For now on use i2c-gpio driver on the same pin as the hardware IP. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NRob Herring <rob.herring@calxeda.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
-