- 22 1月, 2016 7 次提交
-
-
由 Linus Torvalds 提交于
Merge third patch-bomb from Andrew Morton: "I'm pretty much done for -rc1 now: - the rest of MM, basically - lib/ updates - checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit - cpu_mask simplifications - kexec, rapidio, MAINTAINERS etc, etc. - more dma-mapping cleanups/simplifications from hch" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits) MAINTAINERS: add/fix git URLs for various subsystems mm: memcontrol: add "sock" to cgroup2 memory.stat mm: memcontrol: basic memory statistics in cgroup2 memory controller mm: memcontrol: do not uncharge old page in page cache replacement Documentation: cgroup: add memory.swap.{current,max} description mm: free swap cache aggressively if memcg swap is full mm: vmscan: do not scan anon pages if memcg swap limit is hit swap.h: move memcg related stuff to the end of the file mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online mm: vmscan: pass memcg to get_scan_count() mm: memcontrol: charge swap to cgroup2 mm: memcontrol: clean up alloc, online, offline, free functions mm: memcontrol: flatten struct cg_proto mm: memcontrol: rein in the CONFIG space madness net: drop tcp_memcontrol.c mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM mm: memcontrol: allow to disable kmem accounting for cgroup2 mm: memcontrol: account "kmem" consumers in cgroup2 memory controller mm: memcontrol: move kmem accounting code to CONFIG_MEMCG mm: memcontrol: separate kmem code from legacy tcp accounting code ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs由 Linus Torvalds 提交于
Pull overlayfs updates from Miklos Szeredi: "This contains several bug fixes and a new mount option 'default_permissions' that allows read-only exported NFS filesystems to be used as lower layer" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: check dentry positiveness in ovl_cleanup_whiteouts() ovl: setattr: check permissions before copy-up ovl: root: copy attr ovl: move super block magic number to magic.h ovl: use a minimal buffer in ovl_copy_xattr ovl: allow zero size xattr ovl: default permissions
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
Pull fuse updates from Miklos Szeredi: "This adds SEEK_HOLE and SEEK_DATA support in lseek" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: add support for SEEK_HOLE and SEEK_DATA in lseek
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.5 merge window: Enumeration: - Simplify config space size computation (Bjorn Helgaas) - Avoid iterating through ROM outside the resource window (Edward O'Callaghan) - Support PCIe devices with short cfg_size (Jason S. McMullan) - Add Netronome vendor and device IDs (Jason S. McMullan) - Limit config space size for Netronome NFP6000 family (Jason S. McMullan) - Add Netronome NFP4000 PF device ID (Simon Horman) - Limit config space size for Netronome NFP4000 (Simon Horman) - Print warnings for all invalid expansion ROM headers (Vladis Dronov) Resource management: - Fix minimum allocation address overwrite (Christoph Biedl) PCI device hotplug: - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King) - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck) - shpchp: Constify hpc_ops structure (Julia Lawall) - ibmphp: Remove unneeded NULL test (Julia Lawall) Power management: - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski) Virtualization - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander) MSI: - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas) - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko) - Initialize MSI capability for all architectures (Guilherme G. Piccoli) - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang) ARM Versatile host bridge driver: - Remove unused pci_sys_data structures (Lorenzo Pieralisi) Broadcom iProc host bridge driver: - Hide CONFIG_PCIE_IPROC (Arnd Bergmann) - Do not use 0x in front of %pap (Dmitry V. Krivenok) - Update iProc PCIe device tree binding (Ray Jui) - Add PAXC interface support (Ray Jui) - Add iProc PCIe MSI device tree binding (Ray Jui) - Add iProc PCIe MSI support (Ray Jui) Freescale i.MX6 host bridge driver: - Use gpio_set_value_cansleep() (Fabio Estevam) - Add support for active-low reset GPIO (Petr Štetiar) HiSilicon host bridge driver: - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni) Intel VMD host bridge driver: - Export irq_domain_set_info() for module use (Keith Busch) - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch) - Use 32 bit PCI domain numbers (Keith Busch) - Add driver for Intel Volume Management Device (VMD) (Keith Busch) Qualcomm host bridge driver: - Document PCIe devicetree bindings (Stanimir Varbanov) - Add Qualcomm PCIe controller driver (Stanimir Varbanov) - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov) - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov) Renesas R-Car host bridge driver: - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa) - Allow DT to override default window settings (Phil Edworthy) - Convert to DT resource parsing API (Phil Edworthy) - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy) - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy) - Add runtime PM support to pcie-rcar (Phil Edworthy) - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy) - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman) - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman) Synopsys DesignWare host bridge driver: - Simplify control flow (Bjorn Helgaas) - Make config accessor override checking symmetric (Bjorn Helgaas) - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov) Miscellaneous: - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann) - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas) - Fix all whitespace issues (Bogicevic Sasa) - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang) - Use to_pci_dev() instead of open-coding it (Geliang Tang) - Use kobj_to_dev() instead of open-coding it (Geliang Tang) - Use list_for_each_entry() to simplify code (Geliang Tang) - Fix typos in <linux/msi.h> (Thomas Petazzoni) - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)" * tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 PCI: Limit config space size for Netronome NFP4000 PCI: Add Netronome NFP4000 PF device ID x86/PCI: Add driver for Intel Volume Management Device (VMD) PCI/AER: Use 32 bit PCI domain numbers x86/PCI: Allow DMA ops specific to a PCI domain irqdomain: Export irq_domain_set_info() for module use PCI: host: Add of_pci_get_host_bridge_resources() stub genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: designware: Make config accessor override checking symmetric PCI: ibmphp: Remove unneeded NULL test ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: hotplug: Use list_for_each_entry() to simplify code PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers PCI: Avoid iterating through memory outside the resource window PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot ...
-
由 Linus Torvalds 提交于
Merge tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes contains a new driver for OMAP (using the dual-mode timers) as well as an assortment of fixes all across the board" * tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Mark all devices as "might sleep" pwm: omap-dmtimer: Potential NULL dereference on error pwm: add HAS_IOMEM dependency to PWM_FSL_FTM pwm: Add PWM driver for OMAP using dual-mode timers pwm: rcar: Improve accuracy of frequency division setting pwm: lpc32xx: return ERANGE, if requested period is not supported pwm: lpc32xx: fix and simplify duty cycle and period calculations pwm: lpc32xx: make device usable with common clock framework pwm: lpc32xx: correct number of PWM channels from 2 to 1 dt: lpc32xx: pwm: update documentation of LPC32xx PWM device dt: lpc32xx: pwm: correct LPC32xx PWM device node example pwm: fsl-ftm: Fix clock enable/disable when using PM pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE pwm: lpss: Select core part automatically pwm: lpss: Update PWM setting for Broxton pwm: bcm2835: Fix email address specification pwm: bcm2835: Prevent division by zero pwm: bcm2835: Calculate scaler in ->config() pwm: lpss: Remove ->free() callback
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris由 Linus Torvalds 提交于
Pull CRIS updates from Jesper Nilsson: "Just some fixups for section mismatches from Guenter" * tag 'cris-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: cris: Fix section mismatches in architecture startup code cris: debugport: Fix section mismatches
-
git://git.osdn.jp/gitroot/uclinux-h8/linux由 Linus Torvalds 提交于
Pull h8300 updates from Yoshinori Sato: - Add KGDB support - zImage fix - various cleanup * tag 'for-4.5' of git://git.osdn.jp/gitroot/uclinux-h8/linux: h8300: System call entry enable interrupt. h8300: show_stack cleanup h8300: Restraint of warning. h8300: Add KGDB support. irqchip: renesas-h8s: Replace ctrl_outw/ctrl_inw with writew/readw h8300: signal stack fix h8300: Add LZO compression h8300: zImage alignment fix clk: h8300: Remove "sh73a0-" part from compatible value h8300: zImage alignment fix
-
- 21 1月, 2016 33 次提交
-
-
由 Thierry Reding 提交于
Commit d1cd2142 ("pwm: Set enable state properly on failed call to enable") introduced a mutex that is needed to protect internal state of PWM devices. Since that mutex is acquired in pwm_set_polarity() and in pwm_enable() and might potentially block, all PWM devices effectively become "might sleep". It's rather pointless to keep the .can_sleep field around, but given that there are external users let's postpone the removal for the next release cycle. Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull more power management and ACPI updates from Rafael Wysocki: "This includes fixes on top of the previous batch of PM+ACPI updates and some new material as well. From the new material perspective the most significant are the driver core changes that should allow USB devices to stay suspended over system suspend/resume cycles if they have been runtime-suspended already beforehand. Apart from that, ACPICA is updated to upstream revision 20160108 (cosmetic mostly, but including one fixup on top of the previous ACPICA update) and there are some devfreq updates the didn't make it before (due to timing). A few recent regressions are fixed, most importantly in the cpuidle menu governor and in the ACPI backlight driver and some x86 platform drivers depending on it. Some more bugs are fixed and cleanups are made on top of that. Specifics: - Modify the driver core and the USB subsystem to allow USB devices to stay suspended over system suspend/resume cycles if they have been runtime-suspended already beforehand and fix some bugs on top of these changes (Tomeu Vizoso, Rafael Wysocki). - Update ACPICA to upstream revision 20160108, including updates of the ACPICA's copyright notices, a code fixup resulting from a regression fix that was necessary in the upstream code only (the regression fixed by it has never been present in Linux) and a compiler warning fix (Bob Moore, Lv Zheng). - Fix a recent regression in the cpuidle menu governor that broke it on practically all architectures other than x86 and make a couple of optimizations on top of that fix (Rafael Wysocki). - Clean up the selection of cpuidle governors depending on whether or not the kernel is configured for tickless systems (Jean Delvare). - Revert a recent commit that introduced a regression in the ACPI backlight driver, address the problem it attempted to fix in a different way and revert one more cosmetic change depending on the problematic commit (Hans de Goede). - Add two more ACPI backlight quirks (Hans de Goede). - Fix a few minor problems in the core devfreq code, clean it up a bit and update the MAINTAINERS information related to it (Chanwoo Choi, MyungJoo Ham). - Improve an error message in the ACPI fan driver (Andy Lutomirski). - Fix a recent build regression in the cpupower tool (Shreyas Prabhu)" * tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) cpuidle: menu: Avoid pointless checks in menu_select() sched / idle: Drop default_idle_call() fallback from call_cpuidle() cpupower: Fix build error in cpufreq-info cpuidle: Don't enable all governors by default cpuidle: Default to ladder governor on ticking systems time: nohz: Expose tick_nohz_enabled ACPICA: Update version to 20160108 ACPICA: Silence a -Wbad-function-cast warning when acpi_uintptr_t is 'uintptr_t' ACPICA: Additional 2016 copyright changes ACPICA: Reduce regression fix divergence from upstream ACPICA ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830 ACPI / video: Revert "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()" ACPI / video: Document acpi_video_handles_brightness_key_presses() a bit ACPI / video: Fix using an uninitialized mutex / list_head in acpi_video_handles_brightness_key_presses() ACPI / video: Revert "ACPI / video: driver must be registered before checking for keypresses" ACPI / fan: Improve acpi_device_update_power error message ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700 cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0 MAINTAINERS: Add devfreq-event entry MAINTAINERS: Add missing git repository and directory for devfreq ...
-
由 Linus Torvalds 提交于
Merge tag 'renesas-sh-drivers-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas Pull SH driver updates from Simon Horman: "Clean up the clock API on legacy SH to make it more similar to the Common Clock Framework. This will avoid different behaviour in drivers shared between legacy and CCF-based platforms (e.g. SCIF)" * tag 'renesas-sh-drivers-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: drivers: sh: clk: Avoid crashes when passing NULL clocks drivers: sh: clk: Remove obsolete and unused clk_round_parent()
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM 64-bit defconfig updates from Olof Johansson: "As mentioned earlier, we usually bake this into the general "arm64" branch, but this release we have partitioned up the updates a bit more. Most of these updates are enabling new SoCs in the single defconfig for 64-bit, Renesas R8A7795, a number of Tegra options, Socionext Uniphier and a handful of new options for other platforms as well" * tag 'armsoc-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: mediatek: enable MTK_TIMER arm64: defconfig: add CS2000 support arm64: defconfig: Add Renesas R-Car SATA driver for R-Car Gen3 SoCs arm64: defconfig: enable UniPhier SoCs support arm64: add Kconfig entry for Socionext UniPhier SoC family arm64: defconfig: add Renesas sound and AK4613 support arm64: defconfig: add Renesas R-Car DMAC driver support arm64: defconfig: Enable Renesas R-Car I2C Controller arm64: defconfig: enable EthernetAVB arm64: defconfig: Enable GPIO of Renesas R-Car Gen3 SoC arm64: berlin: add the pinctrl dependency for Marvell Berlin SoCs arm64: defconfig: renesas: Enable Renesas r8a7795 SoC arm64: defconfig: Enable printk timestamps arm64: defconfig: Enable squashfs support arm64: defconfig: Enable sdhci-tegra driver arm64: defconfig: Enable serial-tegra driver arm64: defconfig: Enable tegra-apbdma driver arm64: defconfig: Do not disable Tegra AHB driver arm64: defconfig: Enable Tegra210 support
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC defconfig updates from Olof Johansson: "As usual, a bunch of commits, mostly adding drivers and other options to defconfigs because it makes sense to have them enabled on various development or product boards. Too much to enumerate each here. There's an introduction of a pxa_defconfig, since PXA finally will allow building a shared kernel for all boards. With this, we can hopefully remove a bunch of individual defconfigs down the road but it requires a bit of real life testing and transition period" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits) ARM: Add CONFIG_DEPRECATED_PARAM_STRUCT to netwinder_defconfig ARM: multi_v7_defconfig: Add rockchip audio support arm: multi_v7_defconfig: Add virtio drivers ARM: zx_defconfig: remove CONFIG_MMC_DW_IDMAC ARM: versatile: enable the right LEDs ARM: pxa: add defconfig covering all the boards ARM: versatile: select some defaults in defconfig ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3 ARM: bcm2835: enable auxiliary spi driver in defconfig ARM: bcm2835: enable all bcm2835-relevant in defconfig ARM: default to multi_v7_defconfig ARM: multi_v7_defconfig: enable rk808 clkout module ARM: multi_v7_defconfig: enable rockchip crypto module ARM: multi_v7_defconfig: enable Rockchip io-domain driver ARM: multi_v7_defconfig: Enable generic SoC internal OMAP regulators ARM: multi_v7_defconfig: Enable AM437x PMIC TPS65218 ARM: multi_v7_defconfig: enable TPS65217 regulator ARM: realview: select apropriate targets ARM: defconfig: qcom: Enable SSBI drivers ARM: defconfig: Update qcom_defconfig ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM 64-bit DT updates from Olof Johansson: "This is the first release where we split up the 64-bit contributions a bit more, and in particular we are having a separate DT branch for them. Contents: - New devices added to Broadcom NorthStar2 - Misc fixes for Exynos7 boards - QCOM updates for MSM8916 - Rockchip tweaks for rk3368 SoC and eval board - A series of fixes for APM X-Gene v1 and v2 - Renesas R8A7795 CPU/PSCI additions - Marvell Berlin4CT PSCI, cpuidle, watchdog portions - Freescale LS1043a SoC and dev board support + some treewide or other misc changes" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits) dts/ls2080a: Update DTSI to add support of SP805 WDT Documentation: DT: Add entry for ARM SP805-WDT arm64: dts: X-Gene v2: I2C1 clock is always on arm64: dts: X-Gene v1: I2C0 clock is always on arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms arm64: dts: hikey: add label properties to UARTs arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI arm64: dts: apq8016-sbc: enable UART0 on LS connector arm64: dts: juno: Add idle-states to device tree arm64: dts: Added syscon-reboot node for FSL's LS2080A SoC arm64: dts: add LS1043a-RDB board support arm64: dts: add Freescale LS1043a SoC support Documentation: DT: Add entry for Freescale LS1043a-RDB board arm64: dts: uniphier: add PH1-LD10 SoC/board support arm64: renesas: r8a7795: fix SATA clock assignment arm64: dts: salvator-x: Enable SATA controller arm64: dts: r8a7795: Add SATA controller node arm64: renesas: r8a7795: add internal delay for i2c IPs arm64: renesas: salvator-x: Add board part number to DT bindings arm64: dts: r8a7795: Add pmu device nodes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM DT updates from Olof Johansson: "As usual, the bulk of this release is again DT file contents. There's a huge number of changes here, and it's challenging to give a crisp overview of just what is in here. To start with: New boards: - TI-based DM3730 from LogicPD (Torpedo) - Cosmic+ M4 (nommu) initial support (Freescale Vybrid) - Raspberry Pi 2 DT files - Watchdog on Meson8b - Veyron-mickey (ASUS Chromebit) DTS - Rockchip rk3228 SoC and eval board - Sigma Designs Tango4 Improvements: - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files - Misc new devices for Rockchip rk3036 and rk3288 - Allwinner updates for misc SoCs and systems ... and a _large_ number of other changes across the field. Devices added to SoC DTSI and board DTS files for a number of SoC vendors, new product boards on already-supported SoCs, cleanups and refactorings of existing DTS/DTSI files and a bunch of other changes" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits) ARM: dts: compulab: add new board description ARM: versatile: add the syscon LEDs to the DT dts: vt8500: Fix errors in SDHC node for WM8505 ARM: dts: imx6q: clean up unused ipu2grp ARM: dts: silk: Add compatible property to "partitions" node ARM: dts: gose: Add compatible property to "partitions" node ARM: dts: porter: Add compatible property to "partitions" node ARM: dts: koelsch: Add compatible property to "partitions" node ARM: dts: lager: Add compatible property to "partitions" node ARM: dts: bockw: Add compatible property to "partitions" node ARM: dts: meson8b: Add watchdog node Documentation: watchdog: Add new bindings for meson8b ARM: meson: Add status LED for Odroid-C1 ARM: dts: uniphier: fix a typo in comment block ARM: bcm2835: Add the auxiliary clocks to the device tree. ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT. ARM: bcm2835: Split the DT for peripherals from the DT for the CPU ARM: realview: set up cache correctly on the PB11MPCore ARM: dts: Unify G2D device node with other devices on exynos4 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC platform updates from Olof Johansson: "Updates for new platform support: - New platform: Tango4 from Sigma Designs. - Broadcom BCM2836 (Raspberry Pi 2 SoC) - Enable cpufreq on Freescale i.MX7D - Rockchip: SMP support for rk3036, general support for rk3228 - SMP support on Broadcom Kona and NSP - Cleanups for OMAP removing legacy IOMMU data + a bunch of misc fixes and tweaks for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: tango: Fix UP build issues ARM: tango: pass ARM arch level for smc.S ARM: bcm2835: Add Kconfig support for bcm2836 ARM: OMAP2+: Add support for dm814x and dra62x usb ARM: OMAP2+: Add mmc hwmod entries for dm814x ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx ARM: OMAP2+: Fix SoC detection for dra62x j5-eco ARM: tango4: Initial platform support ARM: bcm2835: Add a compat string for bcm2836 machine probe dt-bindings: Add root properties for Raspberry Pi 2 ARM: imx: select SRC for i.MX7 ARM: uniphier: select PINCTRL ARM: OMAP2+: Remove device creation for omap-pcm-audio ARM: OMAP1: Remove device creation for omap-pcm-audio ARM: rockchip: enable support for RK3228 SoCs ARM: rockchip: use const and __initconst for rk3036 smp_operations ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER ARM: BCM: Add SMP support for Broadcom 4708 ARM: BCM: Add SMP support for Broadcom NSP ARM: BCM: Clean up SMP support for Broadcom Kona ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC cleanups from Olof Johansson: "A smallish number of general cleanup commits this release cycle. Some of these are minor tweaks: - shmobile change of binding for their GIC (using arm,pl390 now) - ARCH_RENESAS introduction - Misc other renesas updates There's also a couple of treewide commits from Masahiro Yamada cleaning up const/__initconst for SMP operation structs and a switch to using "depends on" instead of if-constructs on most of the Kconfig platform targets" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: staging: board: armadillo800eva: Use "arm,pl390" staging: board: kzm9d: Use "arm,pl390" ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC ARM: shmobile: r8a7740 dtsi: Use "arm,pl390" for GIC ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC ARM: use "depends on" for SoC configs instead of "if" after prompt ARM/clocksource: use automatic DT probing for ux500 PRCMU ARM: use const and __initconst for smp_operations ARM: hisi: do not export smp_operations structures ARM: mvebu: remove unused mach/gpio.h ARM: shmobile: Remove legacy mach/irqs.h ARM: shmobile: Introduce ARCH_RENESAS MAINTAINERS: Remove link to oss.renesas.com which is closed
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull non-urgent ARM SoC fixes from Olof Johansson: "As usual, we queue up a few fixes that don't seem urgent enough to go in through -rc. - MAINTAINERS updates to add a list for brcmstb and fix a typo - A handful of fixes for OMAP 81xx, a recently resurrected platform so these can't be considered real regressions and thus got queued. - A couple of other small fixes for scoop, sa1100 and davinci" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data ARM: sa1100/simpad: Be sure to clamp return value ARM: scoop: Be sure to clamp return value ARM: davinci: fix a problematic usage of WARN() ARM: davinci: only select WT cache if cache is enabled ARM: OMAP2+: Remove useless check for legacy booting for dm814x ARM: OMAP2+: Enable GPIO for dm814x ARM: dts: Fix dm814x pinctrl address and mask ARM: dts: Fix dm8148 control modules ranges ARM: OMAP2+: Fix timer entries for dm814x ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting ARM: OMAP2+: Add DPPLS clock manager for dm814x clk: ti: Add few dm814x clock aliases ARM: dts: Fix dm814x entries for pllss and prcm MAINTAINERS: gpio-brcmstb: Remove stray '>' MAINTAINERS: brcmstb: Include Broadcom internal mailing-list
-
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic由 Linus Torvalds 提交于
Pull asm-generic updates from Arnd Bergmann: "The asm-generic tree this time contains one series from Nicolas Pitre that makes the optimized do_div() implementation from the ARM architecture available to all architectures. This also adds stricter type checking for callers of do_div, which has uncovered a number of bugs in existing code, and fixes up the ones we have found" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: ARM: asm/div64.h: adjust to generic codde __div64_32(): make it overridable at compile time __div64_const32(): abstract out the actual 128-bit cross product code do_div(): generic optimization for constant divisor on 32-bit machines div64.h: optimize do_div() for power-of-two constant divisors mtd/sm_ftl.c: fix wrong do_div() usage drm/mgag200/mgag200_mode.c: fix wrong do_div() usage hid-sensor-hub.c: fix wrong do_div() usage ti/fapll: fix wrong do_div() usage ti/clkt_dpll: fix wrong do_div() usage tegra/clk-divider: fix wrong do_div() usage imx/clk-pllv2: fix wrong do_div() usage imx/clk-pllv1: fix wrong do_div() usage nouveau/nvkm/subdev/clk/gk20a.c: fix wrong do_div() usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Introduce configfs support for unlocked configfs_depend_item() (krzysztof + andrezej) - Conversion of usb-gadget target driver to new function registration interface (andrzej + sebastian) - Enable qla2xxx FC target mode support for Extended Logins (himansu + giridhar) - Enable qla2xxx FC target mode support for Exchange Offload (himansu + giridhar) - Add qla2xxx FC target mode irq affinity notification + selective command queuing. (quinn + himanshu) - Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi + nab) - Convert se_node_acl configfs deletion + se_node_acl->queue_depth to proper se_session->sess_kref + target_get_session() usage. (hch + sagi + nab) - Fix long-standing race between se_node_acl->acl_kref get and get_initiator_node_acl() lookup. (hch + nab) - Fix target/user block-size handling, and make sure netlink reaches all network namespaces (sheng + andy) Note there is an outstanding bug-fix series for remote I_T nexus port TMR LUN_RESET has been posted and still being tested, and will likely become post -rc1 material at this point" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits) scsi: qla2xxxx: avoid type mismatch in comparison target/user: Make sure netlink would reach all network namespaces target: Obtain se_node_acl->acl_kref during get_initiator_node_acl target: Convert ACL change queue_depth se_session reference usage iscsi-target: Fix potential dead-lock during node acl delete ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage tcm_fc: Wait for command completion before freeing a session target: Fix a memory leak in target_dev_lba_map_store() target: Support aborting tasks with a 64-bit tag usb/gadget: Remove set-but-not-used variables target: Remove an unused variable target: Fix indentation in target_core_configfs.c target/user: Allow user to set block size before enabling device iser-target: Fix non negative ERR_PTR isert_device_get usage target/fcoe: Add tag support to tcm_fc qla2xxx: Check for online flag instead of active reset when transmitting responses qla2xxx: Set all queues to 4k qla2xxx: Disable ZIO at start time. qla2xxx: Move atioq to a different lock to reduce lock contention ...
-
由 Dan Williams 提交于
Larry Finger reports: "My PowerBook G4 Aluminum with a 32-bit PPC processor fails to boot for the 4.4-git series". This is likely due to X still needing /dev/mem access on this platform. CONFIG_IO_STRICT_DEVMEM is not yet safe to turn on when CONFIG_STRICT_DEVMEM=y. Remove the default so that old configurations do not change behavior. Fixes: 90a545e9 ("restrict /dev/mem to idle io memory ranges") Reported-by: NLarry Finger <Larry.Finger@lwfinger.net> Tested-by: NLarry Finger <Larry.Finger@lwfinger.net> Link: http://marc.info/?l=linux-kernel&m=145332012023825&w=2Acked-by: NKees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fengguang Wu 提交于
Add/fix git URLs for various subsystems Add git URL for at91 Add git URL for Rockchip Add git URL for ARM64 Update git URL for ath6kl Add git URL for backlight Add git URL for chrome Add git URL for cris Add git URL for cryptodev Update git URL for DLM Add git URL for eCryptfs Add git URL for ext4 Add git URL for hwspinlock Add git URL for integrity Add git URL for IPVS Add git URL for nfsd Add git URL for KVM/s390 Add git URL for kgdb Add git URL for nvdimm Add git URL for metag Add git URL for wireless drivers Add git URL for devicetree Update git URL for PCMCIA Update git URL for pstore Update git URL for ath10k Add git URL for hexagon Add git URL for reset Add git URL for s390 Fix tree format for SAMSUNG thermal Add git URL for md Add git URL for squashfs Add git URL for swiotlb Add git URL for xtensa Fix tree format for TPM Add git URL for UML Add git URL for VFIO Add git URL for vhost Update git URL for XFS Fix MIC maintainers entry Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NKalle Valo <kvalo@qca.qualcomm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NJames Hogan <james.hogan@imgtec.com> Acked-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Provide statistics on how much of a cgroup's memory footprint is made up of socket buffers from network connections owned by the group. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Provide a cgroup2 memory.stat that provides statistics on LRU memory and fault event counters. More consumers and breakdowns will follow. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NVladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Changing page->mem_cgroup of a live page is tricky and fragile. In particular, the memcg writeback code relies on that mapping being stable and users of mem_cgroup_replace_page() not overlapping with dirtyable inodes. Page cache replacement doesn't have to do that, though. Instead of being clever and transferring the charge from the old page to the new, force-charge the new page and leave the old page alone. A temporary overcharge won't matter in practice, and the old page is going to be freed shortly after this anyway. And this is not performance critical. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
The rationale of separate swap counter is given by Johannes Weiner. Signed-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
Swap cache pages are freed aggressively if swap is nearly full (>50% currently), because otherwise we are likely to stop scanning anonymous when we near the swap limit even if there is plenty of freeable swap cache pages. We should follow the same trend in case of memory cgroup, which has its own swap limit. Signed-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
We don't scan anonymous memory if we ran out of swap, neither should we do it in case memcg swap limit is hit, because swap out is impossible anyway. Signed-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
The following patches will add more functions to the memcg section of include/linux/swap.h. Some of them will need values defined below the current location of the section. So let's move the section to the end of the file. No functional changes intended. Signed-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
mem_cgroup_lruvec_online() takes lruvec, but it only needs memcg. Since get_scan_count(), which is the only user of this function, now possesses pointer to memcg, let's pass memcg directly to mem_cgroup_online() instead of picking it out of lruvec and rename the function accordingly. Signed-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
memcg will come in handy in get_scan_count(). It can already be used for getting swappiness immediately in get_scan_count() instead of passing it around. The following patches will add more memcg-related values, which will be used there. Signed-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
This patchset introduces swap accounting to cgroup2. This patch (of 7): In the legacy hierarchy we charge memsw, which is dubious, because: - memsw.limit must be >= memory.limit, so it is impossible to limit swap usage less than memory usage. Taking into account the fact that the primary limiting mechanism in the unified hierarchy is memory.high while memory.limit is either left unset or set to a very large value, moving memsw.limit knob to the unified hierarchy would effectively make it impossible to limit swap usage according to the user preference. - memsw.usage != memory.usage + swap.usage, because a page occupying both swap entry and a swap cache page is charged only once to memsw counter. As a result, it is possible to effectively eat up to memory.limit of memory pages *and* memsw.limit of swap entries, which looks unexpected. That said, we should provide a different swap limiting mechanism for cgroup2. This patch adds mem_cgroup->swap counter, which charges the actual number of swap entries used by a cgroup. It is only charged in the unified hierarchy, while the legacy hierarchy memsw logic is left intact. The swap usage can be monitored using new memory.swap.current file and limited using memory.swap.max. Note, to charge swap resource properly in the unified hierarchy, we have to make swap_entry_free uncharge swap only when ->usage reaches zero, not just ->count, i.e. when all references to a swap entry, including the one taken by swap cache, are gone. This is necessary, because otherwise swap-in could result in uncharging swap even if the page is still in swap cache and hence still occupies a swap entry. At the same time, this shouldn't break memsw counter logic, where a page is never charged twice for using both memory and swap, because in case of legacy hierarchy we uncharge swap on commit (see mem_cgroup_commit_charge). Signed-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
The creation and teardown of struct mem_cgroup is fairly messy and that has attracted mistakes and subtle bugs before. The main cause for this is that there is no clear model about what needs to happen when, and that attracts more chaos. So create one: 1. mem_cgroup_alloc() should allocate struct mem_cgroup and its auxiliary members and initialize work items, locks etc. so that the object it returns is fully initialized and in a neutral state. 2. mem_cgroup_css_alloc() will use mem_cgroup_alloc() to obtain a new memcg object and configure it and the system according to the role of the new memory-controlled cgroup in the hierarchy. 3. mem_cgroup_css_online() is no longer needed to synchronize with iterators, but it verifies css->id which isn't available earlier. 4. mem_cgroup_css_offline() implements stuff that needs to happen upon the user-visible destruction of a cgroup, which includes stopping all user interfacing as well as releasing certain structures when continued memory consumption would be unexpected at that point. 5. mem_cgroup_css_free() prepares the system and the memcg object for the object's disappearance, neutralizes its state, and then gives it back to mem_cgroup_free(). 6. mem_cgroup_free() releases struct mem_cgroup and auxiliary memory. [arnd@arndb.de: fix SLOB build regression] Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NVladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
There are no more external users of struct cg_proto, flatten the structure into struct mem_cgroup. Since using those struct members doesn't stand out as much anymore, add cgroup2 static branches to make it clearer which code is legacy. Suggested-by: NVladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NVladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
What CONFIG_INET and CONFIG_LEGACY_KMEM guard inside the memory controller code is insignificant, having these conditionals is not worth the complication and fragility that comes with them. [akpm@linux-foundation.org: rework mem_cgroup_css_free() statement ordering] Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: NVladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
tcp_memcontrol.c only contains legacy memory.tcp.kmem.* file definitions and mem_cgroup->tcp_mem init/destroy stuff. This doesn't belong to network subsys. Let's move it to memcontrol.c. This also allows us to reuse generic code for handling legacy memcg files. Signed-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Let the user know that CONFIG_MEMCG_KMEM does not apply to the cgroup2 interface. This also makes legacy-only code sections stand out better. [arnd@arndb.de: mm: memcontrol: only manage socket pressure for CONFIG_INET] Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Acked-by: NVladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
Kmem accounting might incur overhead that some users can't put up with. Besides, the implementation is still considered unstable. So let's provide a way to disable it for those users who aren't happy with it. To disable kmem accounting for cgroup2, pass cgroup.memory=nokmem at boot time. Signed-off-by: NVladimir Davydov <vdavydov@virtuozzo.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
The original cgroup memory controller has an extension to account slab memory (and other "kernel memory" consumers) in a separate "kmem" counter, once the user set an explicit limit on that "kmem" pool. However, this includes various consumers whose sizes are directly linked to userspace activity. Accounting them as an optional "kmem" extension is problematic for several reasons: 1. It leaves the main memory interface with incomplete semantics. A user who puts their workload into a cgroup and configures a memory limit does not expect us to leave holes in the containment as big as the dentry and inode cache, or the kernel stack pages. 2. If the limit set on this random historical subgroup of consumers is reached, subsequent allocations will fail even when the main memory pool available to the cgroup is not yet exhausted and/or has reclaimable memory in it. 3. Calling it 'kernel memory' is misleading. The dentry and inode caches are no more 'kernel' (or no less 'user') memory than the page cache itself. Treating these consumers as different classes is a historical implementation detail that should not leak to users. So, in addition to page cache, anonymous memory, and network socket memory, account the following memory consumers per default in the cgroup2 memory controller: - threadinfo - task_struct - task_delay_info - pid - cred - mm_struct - vm_area_struct and vm_region (nommu) - anon_vma and anon_vma_chain - signal_struct - sighand_struct - fs_struct - files_struct - fdtable and fdtable->full_fds_bits - dentry and external_name - inode for all filesystems. This should give us reasonable memory isolation for most common workloads out of the box. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Acked-by: NVladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-