提交 0c582826 编写于 作者: L Linus Torvalds

Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull non-urgent ARM SoC fixes from Olof Johansson:
 "As usual, we queue up a few fixes that don't seem urgent enough to go
  in through -rc.

   - MAINTAINERS updates to add a list for brcmstb and fix a typo
   - A handful of fixes for OMAP 81xx, a recently resurrected platform
     so these can't be considered real regressions and thus got queued.
   - A couple of other small fixes for scoop, sa1100 and davinci"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data
  ARM: sa1100/simpad: Be sure to clamp return value
  ARM: scoop: Be sure to clamp return value
  ARM: davinci: fix a problematic usage of WARN()
  ARM: davinci: only select WT cache if cache is enabled
  ARM: OMAP2+: Remove useless check for legacy booting for dm814x
  ARM: OMAP2+: Enable GPIO for dm814x
  ARM: dts: Fix dm814x pinctrl address and mask
  ARM: dts: Fix dm8148 control modules ranges
  ARM: OMAP2+: Fix timer entries for dm814x
  ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
  ARM: OMAP2+: Add DPPLS clock manager for dm814x
  clk: ti: Add few dm814x clock aliases
  ARM: dts: Fix dm814x entries for pllss and prcm
  MAINTAINERS: gpio-brcmstb: Remove stray '>'
  MAINTAINERS: brcmstb: Include Broadcom internal mailing-list
......@@ -2377,6 +2377,7 @@ M: Brian Norris <computersforpeace@gmail.com>
M: Gregory Fong <gregory.0xf0@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/stblinux.git
S: Maintained
F: arch/arm/mach-bcm/*brcmstb*
......@@ -2450,7 +2451,7 @@ N: bcm88312
BROADCOM BRCMSTB GPIO DRIVER
M: Gregory Fong <gregory.0xf0@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
S: Supported
F: drivers/gpio/gpio-brcmstb.c
F: Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
......
......@@ -4,25 +4,74 @@
* published by the Free Software Foundation.
*/
&pllss_clocks {
timer1_fck: timer1_fck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
&aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
ti,bit-shift = <3>;
reg = <0x2e0>;
};
timer2_fck: timer2_fck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
&aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
ti,bit-shift = <6>;
reg = <0x2e0>;
};
sysclk18_ck: sysclk18_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&rtcosc_ck>, <&rtcdivider_ck>;
ti,bit-shift = <0>;
reg = <0x02f0>;
};
};
&scm_clocks {
devosc_ck: devosc_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&virt_20000000_ck>, <&virt_19200000_ck>;
ti,bit-shift = <21>;
reg = <0x0040>;
};
tclkin_ck: tclkin_ck {
/* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */
auxosc_ck: auxosc_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <27000000>;
};
/* Optional 32768Hz crystal or clock on RTCOSC pins */
rtcosc_ck: rtcosc_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
devosc_ck: devosc_ck {
/* Optional external clock on TCLKIN pin, set rate in baord dts file */
tclkin_ck: tclkin_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
};
virt_20000000_ck: virt_20000000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <20000000>;
};
/* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */
auxosc_ck: auxosc_ck {
virt_19200000_ck: virt_19200000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <27000000>;
clock-frequency = <19200000>;
};
mpu_ck: mpu_ck {
......@@ -49,12 +98,6 @@
clock-frequency = <48000000>;
};
sysclk18_ck: sysclk18_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
cpsw_125mhz_gclk: cpsw_125mhz_gclk {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -69,7 +112,31 @@
};
&pllss_clocks {
&prcm_clocks {
osc_src_ck: osc_src_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&devosc_ck>;
clock-mult = <1>;
clock-div = <1>;
};
mpu_clksrc_ck: mpu_clksrc_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&devosc_ck>, <&rtcdivider_ck>;
ti,bit-shift = <0>;
reg = <0x0040>;
};
/* Fixed divider clock 0.0016384 * devosc */
rtcdivider_ck: rtcdivider_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&devosc_ck>;
clock-mult = <128>;
clock-div = <78125>;
};
aud_clkin0_ck: aud_clkin0_ck {
#clock-cells = <0>;
......@@ -88,22 +155,4 @@
compatible = "fixed-clock";
clock-frequency = <20000000>;
};
timer1_mux_ck: timer1_mux_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
&aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
ti,bit-shift = <3>;
reg = <0x2e0>;
};
timer2_mux_ck: timer2_mux_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
&aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
ti,bit-shift = <6>;
reg = <0x2e0>;
};
};
......@@ -58,8 +58,10 @@
ti,hwmods = "l3_main";
/*
* See TRM "Table 1-317. L4LS Instance Summary", just deduct
* 0x1000 from the 1-317 addresses to get the device address
* See TRM "Table 1-317. L4LS Instance Summary" for hints.
* It shows the module target agent registers though, so the
* actual device is typically 0x1000 before the target agent
* except in cases where the module is larger than 0x1000.
*/
l4ls: l4ls@48000000 {
compatible = "ti,dm814-l4ls", "simple-bus";
......@@ -183,10 +185,10 @@
control: control@140000 {
compatible = "ti,dm814-scm", "simple-bus";
reg = <0x140000 0x16d000>;
reg = <0x140000 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x160000 0x16d000>;
ranges = <0 0x140000 0x20000>;
scm_conf: scm_conf@0 {
compatible = "syscon";
......@@ -203,19 +205,30 @@
};
};
/*
* Note that silicon revision 2.1 and older
* require input enabled (bit 18 set) for all
* 3.3V I/Os to avoid cumulative hardware damage.
* For more info, see errata advisory 2.1.87.
* We leave bit 18 out of function-mask and rely
* on the bootloader for it.
*/
pincntl: pinmux@800 {
compatible = "pinctrl-single";
reg = <0x800 0xc38>;
reg = <0x800 0x438>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x300ff>;
pinctrl-single,function-mask = <0x307ff>;
};
};
prcm: prcm@180000 {
compatible = "ti,dm814-prcm", "simple-bus";
reg = <0x180000 0x4000>;
reg = <0x180000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x180000 0x2000>;
prcm_clocks: clocks {
#address-cells = <1>;
......@@ -226,9 +239,13 @@
};
};
/* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
pllss: pllss@1c5000 {
compatible = "ti,dm814-pllss", "simple-bus";
reg = <0x1c5000 0x2000>;
reg = <0x1c5000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1c5000 0x1000>;
pllss_clocks: clocks {
#address-cells = <1>;
......
......@@ -84,7 +84,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
/* XXX: I'm unsure, but it seems so */
return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
return !!(ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)));
}
static int scoop_gpio_direction_input(struct gpio_chip *chip,
......
......@@ -34,7 +34,8 @@ config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137/AM17x based system"
depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
select ARCH_DAVINCI_DA8XX
select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
# needed on silicon revs 1.0, 1.1:
select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
select CP_INTC
config ARCH_DAVINCI_DA850
......
......@@ -384,9 +384,7 @@ static __init void dm355_evm_init(void)
dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
if (IS_ERR(aemif))
WARN("%s: unable to get AEMIF clock\n", __func__);
else
if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
clk_prepare_enable(aemif);
platform_add_devices(davinci_evm_devices,
......
......@@ -242,9 +242,7 @@ static __init void dm355_leopard_init(void)
dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
if (IS_ERR(aemif))
WARN("%s: unable to get AEMIF clock\n", __func__);
else
if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
clk_prepare_enable(aemif);
platform_add_devices(davinci_leopard_devices,
......
......@@ -612,8 +612,7 @@ void __init ti814x_init_early(void)
ti814x_clockdomains_init();
dm814x_hwmod_init();
omap_hwmod_init_postsetup();
if (of_have_populated_dt())
omap_clk_soc_init = dm814x_dt_clk_init;
omap_clk_soc_init = dm814x_dt_clk_init;
}
void __init ti816x_init_early(void)
......
......@@ -599,7 +599,7 @@ static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
static struct omap_hwmod dm814x_timer1_hwmod = {
.name = "timer1",
.clkdm_name = "alwon_l3s_clkdm",
.main_clk = "timer_sys_ck",
.main_clk = "timer1_fck",
.dev_attr = &capability_alwon_dev_attr,
.class = &dm816x_timer_hwmod_class,
.flags = HWMOD_NO_IDLEST,
......@@ -608,7 +608,7 @@ static struct omap_hwmod dm814x_timer1_hwmod = {
static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = {
.master = &dm81xx_l4_ls_hwmod,
.slave = &dm814x_timer1_hwmod,
.clk = "timer_sys_ck",
.clk = "timer1_fck",
.user = OCP_USER_MPU,
};
......@@ -636,7 +636,7 @@ static struct omap_hwmod_ocp_if dm816x_l4_ls__timer1 = {
static struct omap_hwmod dm814x_timer2_hwmod = {
.name = "timer2",
.clkdm_name = "alwon_l3s_clkdm",
.main_clk = "timer_sys_ck",
.main_clk = "timer2_fck",
.dev_attr = &capability_alwon_dev_attr,
.class = &dm816x_timer_hwmod_class,
.flags = HWMOD_NO_IDLEST,
......@@ -645,7 +645,7 @@ static struct omap_hwmod dm814x_timer2_hwmod = {
static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = {
.master = &dm81xx_l4_ls_hwmod,
.slave = &dm814x_timer2_hwmod,
.clk = "timer_sys_ck",
.clk = "timer2_fck",
.user = OCP_USER_MPU,
};
......@@ -1230,8 +1230,6 @@ static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = {
/*
* REVISIT: Test and enable the following once clocks work:
* dm81xx_l4_ls__gpio1
* dm81xx_l4_ls__gpio2
* dm81xx_l4_ls__mailbox
* dm81xx_alwon_l3_slow__gpmc
* dm81xx_default_l3_slow__usbss
......@@ -1250,6 +1248,8 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
&dm81xx_l4_ls__wd_timer1,
&dm81xx_l4_ls__i2c1,
&dm81xx_l4_ls__i2c2,
&dm81xx_l4_ls__gpio1,
&dm81xx_l4_ls__gpio2,
&dm81xx_l4_ls__elm,
&dm81xx_l4_ls__mcspi1,
&dm81xx_alwon_l3_fast__tpcc,
......
......@@ -664,6 +664,13 @@ static struct omap_prcm_init_data am3_prm_data __initdata = {
};
#endif
#ifdef CONFIG_SOC_TI81XX
static struct omap_prcm_init_data dm814_pllss_data __initdata = {
.index = TI_CLKM_PLLSS,
.init = am33xx_prm_init,
};
#endif
#ifdef CONFIG_ARCH_OMAP4
static struct omap_prcm_init_data omap4_prm_data __initdata = {
.index = TI_CLKM_PRM,
......@@ -715,6 +722,7 @@ static const struct of_device_id const omap_prcm_dt_match_table[] __initconst =
#endif
#ifdef CONFIG_SOC_TI81XX
{ .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
{ .compatible = "ti,dm814-pllss", .data = &dm814_pllss_data },
{ .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
#endif
#ifdef CONFIG_ARCH_OMAP2
......
......@@ -98,8 +98,8 @@ static void cs3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
static int cs3_gpio_get(struct gpio_chip *chip, unsigned offset)
{
if (offset > 15)
return simpad_get_cs3_ro() & (1 << (offset - 16));
return simpad_get_cs3_shadow() & (1 << offset);
return !!(simpad_get_cs3_ro() & (1 << (offset - 16)));
return !!(simpad_get_cs3_shadow() & (1 << offset));
};
static int cs3_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
......
......@@ -14,10 +14,14 @@ static struct ti_dt_clk dm814_clks[] = {
DT_CLK(NULL, "devosc_ck", "devosc_ck"),
DT_CLK(NULL, "mpu_ck", "mpu_ck"),
DT_CLK(NULL, "sysclk4_ck", "sysclk4_ck"),
DT_CLK(NULL, "sysclk5_ck", "sysclk5_ck"),
DT_CLK(NULL, "sysclk6_ck", "sysclk6_ck"),
DT_CLK(NULL, "sysclk8_ck", "sysclk8_ck"),
DT_CLK(NULL, "sysclk10_ck", "sysclk10_ck"),
DT_CLK(NULL, "sysclk18_ck", "sysclk18_ck"),
DT_CLK(NULL, "timer_sys_ck", "devosc_ck"),
DT_CLK(NULL, "timer1_fck", "timer1_fck"),
DT_CLK(NULL, "timer2_fck", "timer2_fck"),
DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"),
DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"),
{ .node_name = NULL },
......
......@@ -195,6 +195,7 @@ enum {
TI_CLKM_PRM,
TI_CLKM_SCRM,
TI_CLKM_CTRL,
TI_CLKM_PLLSS,
CLK_MAX_MEMMAPS
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册