- 09 2月, 2014 9 次提交
-
-
由 Rostislav Lisovy 提交于
Enable uart1, ecspi1, i2c1, FEC and PMIC Signed-off-by: NRostislav Lisovy <lisovy@gmail.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Greg Ungerer 提交于
Add device tree support for the Freescale IMX50EVk board based around the IMX50 SoC. Supports UART, SPI flash, FEC ethernet and USB on this board. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Greg Ungerer 提交于
Create device tree source for the Freescale IMX50 SoC. This was based on the IMX53 source with changes made as necessary. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Greg Ungerer 提交于
Add device tree pin function definitions for the Freescale IMX50 SoC. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Denis Carikli 提交于
The following devices/functionalities were added: * Main and secondary UARTs. * i2c and the pcf8563 device. * Ethernet. * NAND. * The BP1 button. * The LED. * Watchdog * SD. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: NDenis Carikli <denis@eukrea.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Denis Carikli 提交于
Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: NDenis Carikli <denis@eukrea.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Denis Carikli 提交于
Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: NDenis Carikli <denis@eukrea.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Denis Carikli 提交于
Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: NDenis Carikli <denis@eukrea.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Aida Mynzhasova 提交于
Add auart2 pins configuration on its main pads Signed-off-by: NAida Mynzhasova <aida.mynzhasova@skitlab.ru> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 07 2月, 2014 1 次提交
-
-
由 Rostislav Lisovy 提交于
Signed-off-by: NRostislav Lisovy <lisovy@gmail.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 03 2月, 2014 5 次提交
-
-
由 Helge Deller 提交于
Add support for the flexible mmap memory layout (as described in http://lwn.net/Articles/91829). This is especially very interesting on parisc since we currently only support 32bit userspace (even with a 64bit Linux kernel). Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Guy Martin 提交于
On Linux, only parisc uses a different value for EWOULDBLOCK which causes a lot of troubles for applications not checking for both values. Since the hpux compat is long dead, make EWOULDBLOCK behave the same as all other architectures. Signed-off-by: NGuy Martin <gmsoft@tuxicoman.be> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
The stat.h header file is exported to userspace. Some userspace applications failed to compile due to missing/unknown types, so we better convert it to use native types only (like it's done on other architectures too). Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
This commit: f8dae006: parisc: Ensure full cache coherency for kmap/kunmap caused negative caching side-effects, e.g. hanging processes with expect and too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems. This patch now partly reverts it and has been in production use on our debian buildd makeservers since a week without any major problems. Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: NHelge Deller <deller@gmx.de>
-
- 02 2月, 2014 1 次提交
-
-
由 Heiko Carstens 提交于
With commit d8d14bd0 ("fs/compat: fix lookup_dcookie() parameter handling") I changed the type of the len parameter of the lookup_dcookie() syscall. However I missed that there was still a stale declaration in arch/tile/.. which now causes a compile error on tile: In file included from fs/dcookies.c:28:0: include/linux/compat.h:425:17: error: conflicting types for 'compat_sys_lookup_dcookie' fs/dcookies.c:207:1: error: conflicting types for 'compat_sys_lookup_dcookie' Simply remove the declaration in the tile architecture, which is only a leftover from before the different compat lookup_dcookie() versions have been merged. The correct declaration is now in include/linux/compat.h The build error was reported by Fenguang's build bot. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 2月, 2014 17 次提交
-
-
由 Olof Johansson 提交于
TI_EDMA fell out of automatically selected options in the multi_v7 defconfig due to a select being removed from the davinci Kconfig entry. So we need to re-enable explicitly to not regress some platforms. The rest is just the result of running 'make multi_v7_defconfig + make savedefconfig' to remove entries that are no longer needed due to changed dependencies/selects or defaults. Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: NJason Cooper <jason@lakedaemon.net> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Tim Kryger 提交于
The board schematic states that the "SD_CARD_DET_N gets pulled to GND when card is inserted" so the polarity has been updated to active low. Polarity is now specified with a GPIO define instead of a magic number. Signed-off-by: NTim Kryger <tim.kryger@linaro.org> Reviewed-by: NMatt Porter <matt.porter@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Fabio Estevam 提交于
Select CONFIG_AT803X_PHY so that we can boot hummingboard via NFS. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Grygorii Strashko 提交于
Drop automatic selection of TI_EDMA from Keystone Kconfig file, as it produces build warning in case if CONFIG_DMADEVICES is not set: warning: (ARCH_KEYSTONE) selects TI_EDMA which has unmet direct dependencies (DMADEVICES && (ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE)) Instead enable TI EDMA support from defconfig. Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Soren Brinkmann 提交于
Add nodes for the Arasan SDHCI controller to Zynq dts files. Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Rob Herring 提交于
SMP is a user configurable option, not a hardware feature and should not be selected. Signed-off-by: NRob Herring <robh@kernel.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Stephen Warren 提交于
DEBUG_FS used to be selected by COMMON_CLK_DEBUG, which was enabled by tegra_defconfig. However, this config option no longer exists, so no longer selects DEBUG_FS, and nothing else selects it either. So, "make tegra_defconfig" no longer enables DEBUG_FS in .config. Rebuild tegra_defconfig on top of next-20140424, while manually re-enabling DEBUG_FS. Reasons for removed entries are: - I2C_MUX: selected by MEDIA_SUBDRV_AUTOSELECT - DRM_PANEL: selected by DRM_TEGRA - NEW_LEDS: selected by many things; at least VT - LEDS_CLASS: selected by many things; at least VT - LEDS_TRIGGERS: selected by many things; at least VT - COMMON_CLK_DEBUG: no longer exists Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NKevin Hilman <khilman@linaro.org>
-
由 Stephen Warren 提交于
multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Linus Walleij 提交于
This board was missed when converting all the others to proper abstracted GPIO handling. Fix it up the right way by requesting and driving GPIO line 0 high through gpiolib to power off the machine. Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Reported-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Linus Walleij 提交于
Commit 78d16321 deleted the static mappings of the core modules, but this static map is still needed on the Integrator/CP (not the Integrator/AP). Restore the static map on the Integrator/CP. Reported-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Stephen Boyd 提交于
This allows us to probe the clock controller devices and boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Stephen Boyd 提交于
Add the necessary DT nodes to probe the clock controllers on MSM devices as well as hook up the uart nodes to the clock controllers. This should allow us to boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Nishanth Menon 提交于
Move all OMAP4 PM errata initializations to centralized location in omap4_pm_init_early. This allows for users to utilize the erratas in various submodules as needed. Reported-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NNishanth Menon <nm@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Strashko, Grygorii 提交于
The same workaround as ff999b8a "ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC ..." need to be applied not only when system is booting, but when MPUSS hits OSWR state through CPUIdle too. Without this WA the same issue is reproduced now on boards PandaES and Tablet/Blaze with SOM OMAP4460 when CONFIG_CPU_IDLE is enabled. After MPUSS has enterred OSWR and waken up: - GIC distributor became disabled forever - scheduling is not performed any more Cc: Kevin Hilman <khilman@linaro.org> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Reported-by: NTaras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Mikulas Patocka 提交于
The patch 3ddc5b46 breaks networking on alpha (there is a follow-up fix 5cfe8f1b, but networking is still broken even with the second patch). The patch 3ddc5b46 makes csum_partial_copy_from_user check the pointer with access_ok. However, csum_partial_copy_from_user is called also from csum_partial_copy_nocheck and csum_partial_copy_nocheck is called on kernel pointers and it is supposed not to check pointer validity. This bug results in ssh session hangs if the system is loaded and bulk data are printed to ssh terminal. This patch fixes csum_partial_copy_nocheck to call set_fs(KERNEL_DS), so that access_ok in csum_partial_copy_from_user accepts kernel-space addresses. Cc: stable@vger.kernel.org Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
由 蔡正龙 提交于
Signed-off-by: NZhenglong.cai <zhenglong.cai@cs2c.com.cn> Signed-off-by: NMatt Turner <mattst88@gmail.com>
-
- 31 1月, 2014 7 次提交
-
-
由 Dave Jones 提交于
Passing a freed 'pages' to free_xenballooned_pages will end badly on kernels with slub debug enabled. This looks out of place between the rc assign and the check, but we do want to kfree pages regardless of which path we take. Signed-off-by: NDave Jones <davej@fedoraproject.org> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Zoltan Kiss 提交于
The grant mapping API does m2p_override unnecessarily: only gntdev needs it, for blkback and future netback patches it just cause a lock contention, as those pages never go to userspace. Therefore this series does the following: - the original functions were renamed to __gnttab_[un]map_refs, with a new parameter m2p_override - based on m2p_override either they follow the original behaviour, or just set the private flag and call set_phys_to_machine - gnttab_[un]map_refs are now a wrapper to call __gnttab_[un]map_refs with m2p_override false - a new function gnttab_[un]map_refs_userspace provides the old behaviour It also removes a stray space from page.h and change ret to 0 if XENFEAT_auto_translated_physmap, as that is the only possible return value there. v2: - move the storing of the old mfn in page->index to gnttab_map_refs - move the function header update to a separate patch v3: - a new approach to retain old behaviour where it needed - squash the patches into one v4: - move out the common bits from m2p* functions, and pass pfn/mfn as parameter - clear page->private before doing anything with the page, so m2p_find_override won't race with this v5: - change return value handling in __gnttab_[un]map_refs - remove a stray space in page.h - add detail why ret = 0 now at some places v6: - don't pass pfn to m2p* functions, just get it locally Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Suggested-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Steve Capper 提交于
We have the following means for encoding writable or dirty ptes: PTE_DIRTY PTE_RDONLY !pte_dirty && !pte_write 0 1 !pte_dirty && pte_write 0 1 pte_dirty && !pte_write 1 1 pte_dirty && pte_write 1 0 So we can't distinguish between writable clean ptes and read only ptes. This can cause problems with ptes being incorrectly flagged as read only when they are writable but not dirty. This patch introduces a new software bit PTE_WRITE which allows us to correctly identify writable ptes. PTE_RDONLY is now only clear for valid ptes where a page is both writable and dirty. Signed-off-by: NSteve Capper <steve.capper@arm.com> Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Steve Capper 提交于
Expand out the pte manipulation functions. This makes our life easier when using things like tags and cscope. Signed-off-by: NSteve Capper <steve.capper@arm.com> Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Andrey Vagin 提交于
The SOFT_DIRTY bit shows that the content of memory was changed after a defined point in the past. mprotect() doesn't change the content of memory, so it must not change the SOFT_DIRTY bit. This bug causes a malfunction: on the first iteration all pages are dumped. On other iterations only pages with the SOFT_DIRTY bit are dumped. So if the SOFT_DIRTY bit is cleared from a page by mistake, the page is not dumped and its content will be restored incorrectly. This patch does nothing with _PAGE_SWP_SOFT_DIRTY, becase pte_modify() is called only for present pages. Fixes commit 0f8975ec ("mm: soft-dirty bits for user memory changes tracking"). Signed-off-by: NAndrey Vagin <avagin@openvz.org> Acked-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Borislav Petkov <bp@suse.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Woodhouse 提交于
Both clang 3.5 and GCC 4.9 will support this (as of r199754 and r207196 respectively). Both have been tested to produce booting kernels when the 16-bit code is built with -m16. (Modulo LLVM PR3997, at least.) [ hpa: folded test for -m16 into M16_CFLAGS ] Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Link: http://lkml.kernel.org/r/1390997807.20153.133.camel@i7.infradead.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 David Woodhouse 提交于
Commit dd78b973 ("x86, boot: Move CPU flags out of cpucheck") introduced ambiguous inline asm in the has_eflag() function. In 16-bit mode want the instruction to be 'pushfl', but we just say 'pushf' and hope the compiler does what we wanted. When building with 'clang -m16', it won't, because clang doesn't use the horrid '.code16gcc' hack that even 'gcc -m16' uses internally. Say what we mean and don't make the compiler make assumptions. [ hpa: ideally we would be able to use the gcc %zN construct here, but that is broken for 64-bit integers in gcc < 4.5. The code with plain "pushf/popf" is fine for 32- or 64-bit mode, but not for 16-bit mode; in 16-bit mode those are 16-bit instructions in .code16 mode, and 32-bit instructions in .code16gcc mode. ] Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Link: http://lkml.kernel.org/r/1391079628.26079.82.camel@shinybook.infradead.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-