The third argument for of_get_property() is a pointer, hence pass
NULL instead of 0.
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Since we don't know if they new kernel we are kexecing into has been
built to support relocation on exceptions, we disable them before we
kexec.

We do NOT disable them if we are execing a kdump kernel, because we
want to change as little state as possible and it is likely that we are
execing ourselves and will be able to handle them anyway.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We currently do this synchronously at boot from setup_arch. On a large
system this could hypothetically take a little while to complete, so
currently we will give up if we are asked to wait for more than a second
in total.

If we actually start hitting that timeout in practice we can always move
this code into a kernel thread to take care of it in the background.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

I am going to use this in the next patch, better to have this code in
one place rather than three.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

These wrappers hide the parameters that have to be passed to H_SET_MODE
to enable/disable relocation on during exceptions.

As noted in the comments, since these have partition wide scope, they
may take some time to complete and must be periodically retried until
H_SUCCESS is returned.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This new hcall in POWER8 is used to set various resource mode registers.
eg. it can set address translation mode on interrupt (note: partition wide
scope)
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This turns on MMU on execptions via AIL field in the LPCR.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We want to change what's initially set in the LPCR, so start by taking the move
from LPCR out of the function and into the caller.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

POWER8/v2.07 allows exceptions to be taken with the MMU still on.

A new set of exception vectors is added at 0xc000_0000_0000_4xxx.  When the HW
takes us here, MSR IR/DR will be set already and we no longer need a costly
RFID to turn the MMU back on again.

The original 0x0 based exception vectors remain for when the HW can't leave the
MMU on.  Examples of this are when we can't trust the current MMU mappings,
like when we are changing from guest to hypervisor (HV 0 -> 1) or when the MMU
was off already.  In these cases the HW will take us to the original 0x0 based
exception vectors with the MMU off as before.

This uses the new macros added previously too implement these new execption
vectors at 0xc000_0000_0000_4xxx.  We exit these exception vectors using
mflr/blr (rather than mtspr SSR0/RFID), since we don't need the costly MMU
switch anymore.

This moves the __end_interrupts marker down past these new 0x4000 vectors since
they will need to be copied down to 0x0 when the kernel is not at 0x0.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

POWER8/v2.07 allows exceptions to be taken with the MMU still on.

A new set of exception vectors is added at 0xc000_0000_0000_4xxx.  When the HW
takes us here, MSR IR/DR will be set already and we no longer need a costly
RFID to turn the MMU back on again.

The original 0x0 based exception vectors remain for when the HW can't leave the
MMU on.  Examples of this are when we can't trust the current the MMU mappings,
like when we are changing from guest to hypervisor (HV 0 -> 1) or when the MMU
was off already.  In these cases the HW will take us to the original 0x0 based
exception vectors with the MMU off as before.

The below macros are copies of the macros used at the 0x0 offset but modified
to handle the MMU being on.  In these macros we use the link register to jump
to the secondary handlers rather than using RFID (RFID was also use to turn on
the MMU).
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This turns the syscall handler into macros as we are going to want to reuse
them again later.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If we change load_hander() to use an ori instead of addi, we can load handlers
upto 64k away provided we are still 64k aligned.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This removes the large gap between 0x1800 and 0x3000.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Remove redundancy spaces and make tab usage consistent.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If we build a kernel with CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n,
the kernel fails when we run at a non zero offset. It turns out
we were incorrectly wrapping some of the relocatable kernel code
with CONFIG_CRASH_DUMP.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

A PVR of 0x0F000004 means we are arch v2.07 complicate ie, POWER8.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Update ibm,architecture.vec for POWER8 and allows us to support more
than one parition per core.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

commit ea96025a('Don't use alloc_bootmem() in init_IRQ() path')
changed alloc_bootmem() to kzalloc(),
but missed to change free_bootmem() to kfree().
So correct it.
Signed-off-by: NJoonsoo Kim <js1304@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On powerpc, ptrace will disable hardware breakpoint request once the
breakpoint is hit. It is the responsibility of the caller to set it
again. However, when the caller sets the hardware breakpoint again
using ptrace(PTRACE_SET_DEBUGREG, child_pid, 0, addr), the hardware
breakpoint is not enabled.

While gdb's approach is to unregister and re-register the hardware
breakpoint every time the breakpoint is hit - which is working fine,
this could affect other programs trying to re-register hardware
breakpoint without unregistering.

This patch enables hardware breakpoint if the caller is re-registering.
Signed-off-by: NAravinda Prasad <aravinda@linux.vnet.ibm.com>
Acked-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The only difference between powerpc and asm-generic le-bitops is
test_bit_le().  Usually all bitops require a long aligned bitmap.
But powerpc test_bit_le() can take an unaligned address.

There is no special callsite of test_bit_le() that needs unaligned
access in powerpc as far as I can see.  So convert to use
asm-generic/bitops/le.h for powerpc.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Replace BITOP_MASK and BITOP_WORD with BIT_MASK and BIT_WORD defined
in linux/bitops.h and remove BITOP_* which are not used anymore.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

- Caluculate the bitmap size with BITS_TO_LONGS()
 - Use bitmap_empty() to verify that all bits are cleared

This also includes a printk to pr_warn() conversion.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use the 'unistd.h' from arch/powerpc/include/uapi to build the perf tool.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

There are many cases that Semiconductor is misspelled.  The patch
fix these typos.
Signed-off-by: NLi Yang <leoli@freescale.com>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

I noticed a couple of function prototypes for functions that
no longer exist. Remove them.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Most of setup.h should not be exported to userspace, so move it
back. All we are left with is the asm-generic include to pick
up the COMMAND_LINE_SIZE define.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Fix global symbol name to match actual denorm_exception_hv label.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Just a copy of POWER7 for now.  Will update with new code later.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We are going to reuse this in POWER8 so make the name generic.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If we have two cache events that require different settings of the L2SEL
bits in MMCR1 then we can not schedule those events simultaneously. Add
logic to the constraint handling to express that.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The transition time for the 7447A is around 8ms which makes it possible
to use the ondemand governor.  This has been tested on the iBook G4
(PowerBook6,7).
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Tested-by: NMichel Dänzer <michel@daenzer.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

s/intruction/instruction/
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

PPC_PTRACE_GETHWDBGINFO, PPC_PTRACE_SETHWDEBUG and PPC_PTRACE_DELHWDEBUG are
PowerPC specific ptrace flags that use the watchpoint register. While they are
targeted primarily towards BookE users, user-space applications such as GDB
have started using them for BookS too. This patch enables the use of generic
hardware breakpoint interfaces for these new flags.

Apart from the usual benefits of using generic hw-breakpoint interfaces, these
changes allow debuggers (such as GDB) to use a common set of ptrace flags for
their watchpoint needs and allow more precise breakpoint specification (length
of the variable can be specified).

Mikey added: rebased and added dbginfo.features around #ifdef
             CONFIG_HAVE_HW_BREAKPOINT
Signed-off-by: NK.Prasad <prasad@linux.vnet.ibm.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The last user of ppc_md.idle_loop() was removed when we dropped the
legacy iSeries code, in commit 8ee3e0d6.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch tries to fix the following BUG report:

[    0.012313] BUG: MAX_STACK_TRACE_ENTRIES too low!
[    0.012318] turning off the locking correctness validator.
[    0.012321] Call Trace:
[    0.012330] [c00000017666f6d0] [c000000000012128] .show_stack+0x78/0x184 (unreliable)
[    0.012339] [c00000017666f780] [c0000000000b6348] .save_trace+0x12c/0x14c
[    0.012345] [c00000017666f800] [c0000000000b7448] .mark_lock+0x2bc/0x710
[    0.012351] [c00000017666f8b0] [c0000000000bb198] .__lock_acquire+0x748/0xaec
[    0.012357] [c00000017666f9b0] [c0000000000bb684] .lock_acquire+0x148/0x194
[    0.012365] [c00000017666fa80] [c00000000069371c] .mutex_lock_nested+0x84/0x4ec
[    0.012372] [c00000017666fb90] [c000000000096998] .smpboot_register_percpu_thread+0x3c/0x10c
[    0.012380] [c00000017666fc30] [c0000000009ba910] .spawn_ksoftirqd+0x28/0x48
[    0.012386] [c00000017666fcb0] [c00000000000a98c] .do_one_initcall+0xd8/0x1d0
[    0.012392] [c00000017666fd60] [c00000000000b1f8] .kernel_init+0x120/0x398

[    0.012398] [c00000017666fe30] [c000000000009ad4] .ret_from_kernel_thread+0x5c/0x64
[    0.012404] [c00000017666fa00] [c00000017666fb20] 0xc00000017666fb20
[    0.012410] [c00000017666fa80] [c00000000069371c] .mutex_lock_nested+0x84/0x4ec
[    0.012416] [c00000017666fb90] [c000000000096998] .smpboot_register_percpu_thread+0x3c/0x10c
[    0.012422] [c00000017666fc30] [c0000000009ba910] .spawn_ksoftirqd+0x28/0x48
[    0.012427] [c00000017666fcb0] [c00000000000a98c] .do_one_initcall+0xd8/0x1d0
[    0.012433] [c00000017666fd60] [c00000000000b1f8] .kernel_init+0x120/0x398

[    0.012439] [c00000017666fe30] [c000000000009ad4] .ret_from_kernel_thread+0x5c/0x64
.......

The reason is that the back chain of c00000017666fe30
(ret_from_kernel_thread) contains some invalid value, which might form a
loop.
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

OPAL provides the firmware base/entry in registers at boot time
for debugging purposes. We had a bug in the code trying to stash
these into the appropriate kernel globals (a line of code was
probably dropped by accident back when this was merged)
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The function initialize_flash_pde_data is only called four times.  All four
calls are in the function rtas_flash_init, and on the failure of any of the
calls, remove_flash_pde is called on the third argument of each of the
calls.  There is thus no need for initialize_flash_pde_data to call
remove_flash_pde on the same argument.  remove_flash_pde kfrees the data
field of its argument, and does not clear that field, so this amounts ot a
possible double free.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier f,free,a;
parameter list[n] ps;
type T;
expression e;
@@

f(ps,T a,...) {
  ... when any
      when != a = e
  if(...) { ... free(a); ... return ...; }
  ... when any
}

@@
identifier r.f,r.free;
expression x,a;
expression list[r.n] xs;
@@

* x = f(xs,a,...);
  if (...) { ... free(a); ... return ...; }
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>