- 17 4月, 2008 26 次提交
-
-
由 Roland Dreier 提交于
Allow the compiler to optimize better and generate smaller code: add/remove: 0/6 grow/shrink: 2/0 up/down: 1528/-1864 (-336) function old new delta .ehca_set_pagebuf 1344 2172 +828 .ehca_probe 2312 3012 +700 ehca_set_pagebuf_phys 24 - -24 ehca_set_pagebuf_fmr 24 - -24 ehca_init_device 24 - -24 .ehca_set_pagebuf_fmr 480 - -480 .ehca_set_pagebuf_phys 512 - -512 .ehca_init_device 800 - -800 Also this fixes warnings like: drivers/infiniband/hw/ehca/ehca_mrmw.c:2015:5: warning: symbol 'ehca_set_pagebuf_fmr' was not declared. Should it be static? Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Avoid namespace pollution and allow the compiler to optimize better. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
On some platforms, eg sparc64, dma_addr_t is not the same size as a pointer, so printing dma_addr_t values by casting to void * and using a %p format generates warnings. Fix this by casting to unsigned long and using %lx instead. This fixes the warnings: drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_setup_virt_qp': drivers/infiniband/hw/nes/nes_verbs.c:1047: warning: cast to pointer from integer of different size drivers/infiniband/hw/nes/nes_verbs.c:1078: warning: cast to pointer from integer of different size drivers/infiniband/hw/nes/nes_verbs.c:1078: warning: cast to pointer from integer of different size drivers/infiniband/hw/nes/nes_verbs.c: In function 'nes_reg_user_mr': drivers/infiniband/hw/nes/nes_verbs.c:2657: warning: cast to pointer from integer of different size Reported by Andrew Morton <akpm@linux-foundation.org>. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
nes_netdev_exit() has no callers, so delete it. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
nes_unregister_ofa_device() dereferences the nesibdev pointer before testing if it's NULL. Also, the test is doubly redundant because the only caller of nes_unregister_ofa_device() is nes_destroy_ofa_device(), which already tests if nesibdev is NULL. Remove the unnecessary test. This was spotted by the Coverity checker (CID 2190). Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Christoph Hellwig wants to unexport get_empty_filp(), which is an ugly internal interface. Change the modular user in ib_uverbs_alloc_event_file() to use the better alloc_file() interface; this makes the code cleaner too. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
The file member of struct ib_uverbs_event_file was only used to keep track of whether the file had been closed or not. The only thing we ever did with the value was check if it was NULL or not. Simplify the code and get rid of the need to keep track of the struct file * we allocate by replacing the file member with an is_closed member. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
The struct mlx4_interface.event() method was supposed to get an enum mlx4_dev_event, but the driver code was actually passing in the hardware enum mlx4_event values. Fix up the callers of mlx4_dispatch_event() so that they pass in the right type of value, and fix up the event method in mlx4_ib so that it can handle the enum mlx4_dev_event values. This eliminates the need for the subtype parameter to the event method, so remove it. This also fixes the sparse warning drivers/net/mlx4/intf.c:127:48: warning: mixing different enum types drivers/net/mlx4/intf.c:127:48: int enum mlx4_event versus drivers/net/mlx4/intf.c:127:48: int enum mlx4_dev_event Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NSteve Wise <swise@opengridcomputing.com>
-
由 Roland Dreier 提交于
None of the cqp_reqs_XXX counters were ever used anywhere, and neither was the nics_per_function variable. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Fix a couple of htonl() that should really be ntohl(). Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Add __force cast of node_guid to __u64, since we are sticking it into a structure whose definition is shared with userspace. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Mostly update the RB tree comparisons to force __be types to normal integers, but the change to cm_format_sidr_req() is a real fix: param->path->pkey is already __be16. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NSean Hefty <sean.hefty@intel.com>
-
由 Roland Dreier 提交于
Trivial fixes to stamp_send_wqe(). Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Fix drivers/infiniband/hw/ipath/ipath_init_chip.c:526:10: warning: symbol 'val' shadows an earlier one drivers/infiniband/hw/ipath/ipath_init_chip.c:473:6: originally declared here by giving the second val a different name. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NArthur Jones <arthur.jones@qlogic.com>
-
由 Arthur Jones 提交于
There's no reason for the third parameter of ipath_count_units() to be a u32 *, so change it to be an int * instead. This fixes the sparse warning: drivers/infiniband/hw/ipath/ipath_file_ops.c:1654:47: warning: incorrect type in argument 3 (different signedness) drivers/infiniband/hw/ipath/ipath_file_ops.c:1654:47: expected unsigned int [usertype] *maxportsp drivers/infiniband/hw/ipath/ipath_file_ops.c:1654:47: got int *<noident> Signed-off-by: NArthur Jones <arthur.jones@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Fix sparse warnings about pointer signedness by using a signed int when calling idr_get_new_above(). Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NSteve Wise <swise@opengridcomputing.com>
-
由 Roland Dreier 提交于
Write tests for NULL pointers as if (!ptr) instead of if (ptr == 0UL) to fix sparse warnings. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NSteve Wise <swise@opengridcomputing.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Fix a few whitespace and other coding style problems. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Paul Bolle 提交于
Describe noraid parameter with its name (and not its value). Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
The header files for the Pb1200/DBAu1200 boards have wrong definition for the IDE interface's decoded range length -- it should be 512 bytes according to what the IDE driver does. In addition, the IDE platform device claims 1 byte too many for its memory resource -- fix the platform code and the IDE driver in accordance. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
The driver fails to compile with CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA enabled: drivers/ide/mips/au1xxx-ide.c: In function `auide_build_dmatable': drivers/ide/mips/au1xxx-ide.c:256: error: implicit declaration of function `sg_virt' drivers/ide/mips/au1xxx-ide.c:275: error: implicit declaration of function `sg_next' drivers/ide/mips/au1xxx-ide.c:275: warning: assignment makes pointer from integer without a cast Fix this by including <linux/scatterlist.h>. While at it, remove the #include's without which the driver happily builds. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Sergei Shtylyov 提交于
Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c: include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared `static' but never defined include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared `static' but never defined by wiping out the whole "function prototyping" section from the header file <asm-mips/mach-au1x00/au1xxx_ide.h> as it mostly declared functions that are already dead in the IDE driver; move the only useful prototype into the driver. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 16 4月, 2008 14 次提交
-
-
由 Greg Kroah-Hartman 提交于
The num_interrupt_in, num_bulk_in, and other checks in the usb-serial code are just wrong, there are too many different devices out there with different numbers of endpoints. We need to just be sticking with the device ids instead of trying to catch this kind of thing. It broke too many different devices. This fixes a large number of usb-serial devices to get them working properly again. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 tang kai 提交于
This patch add new vendor ID and device ID for AMOI HSDPA modem. From: tang kai <tangk73@hotmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 fangxiaozhi 提交于
- declare the unusal device for Huawei data card devices in unusual_devs.h - disable the product ID matching for Huawei data card devices in usb_match_device function of driver.c - declare the product IDs in option.c. Signed-off-by: Nfangxiaozhi <huananhu@huawei.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthias Urlichs 提交于
Add devices by AMOI and NovatelWireless. Signed-Off-By: NMatthias Urlichs <matthias@urlichs.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 James Cameron 提交于
The modem was detected, the ttyUSB{0,1,2} appeared, a call could be made, and the expected data rate was achieved. Tested for an hour or two, total of 100Mb. I shall do more testing. Signed-off-by: NJames Cameron <quozl@laptop.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Krzysztof Helt 提交于
The THERMAL_MAX_TRIPS value is set to 10. It is too few for the Compaq AP550 machine which has 12 trip points. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chuck Ebbert 提交于
List could have become empty after the unlocked check that was made earlier, so check again inside the lock. Should fix https://bugzilla.redhat.com/show_bug.cgi?id=427765Signed-off-by: NChuck Ebbert <cebbert@redhat.com> Cc: <stable@kernel.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
The SPI core now expects num_chipselect to be set correctly as due to added checks on the chip being selected before an transfer is allowed. This patch adds a num_cs field to the platform data which needs to be set correctly before adding the SPI platform device. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
Pass the bus number we expect the S3C24XX SPI driver to attach to via the platform data. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
The s3c24xx_spi_txrx() function should initialise the completion each time before using it, otherwise we end up with the possibility of returning success before the interrupt handler has processed all the data. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable serial platform drivers, to re-enable auto loading. NOTE that Kconfig for some of these drivers doesn't allow modular builds, and thus doesn't match the driver source's unload support. Presumably their unload code is buggy and/or weakly tested... [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable PCMCIA platform drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: registration fixes] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable 'misc' platform drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: bugfix, registration fixes] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
/proc/fb is not removed during rmmod. Steps to reproduce: modprobe fb rmmod fb ls /proc BUG: unable to handle kernel paging request at ffffffffa0094370 IP: [<ffffffff802b92a1>] proc_get_inode+0x101/0x130 PGD 203067 PUD 207063 PMD 17e758067 PTE 0 Oops: 0000 [1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:02.0/resource CPU 1 Modules linked in: nf_conntrack_irc xt_state iptable_filter ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack ip_tables x_tables vfat fat usbhid ehci_hcd uhci_hcd usbcore sr_mod cdrom [last unloaded: fb] Pid: 21205, comm: ls Not tainted 2.6.25-rc8-mm2 #14 RIP: 0010:[<ffffffff802b92a1>] [<ffffffff802b92a1>] proc_get_inode+0x101/0x130 RSP: 0018:ffff81017c4bfc78 EFLAGS: 00010246 RAX: 0000000000008000 RBX: ffff8101787f5470 RCX: 0000000048011ccc RDX: ffffffffa0094320 RSI: ffff810006ad43b0 RDI: ffff81017fc2cc00 RBP: ffff81017e450300 R08: 0000000000000002 R09: ffff81017c5d1000 R10: 0000000000000000 R11: 0000000000000246 R12: ffff81016b903a28 R13: ffff81017f822020 R14: ffff81017c4bfd58 R15: ffff81017f822020 FS: 00007f08e71696f0(0000) GS:ffff81017fc06480(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffa0094370 CR3: 000000017e54a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ls (pid: 21205, threadinfo ffff81017c4be000, task ffff81017de48770) Stack: ffff81017c5d1000 00000000ffffffea ffff81017e450300 ffffffff802bdd1e ffff81017f802258 ffff81017c4bfe48 ffff81016b903a28 ffff81017f822020 ffff81017c4bfd48 ffffffff802b9ba0 ffff81016b903a28 ffff81017f802258 Call Trace: [<ffffffff802bdd1e>] ? proc_lookup_de+0x8e/0x100 [<ffffffff802b9ba0>] ? proc_root_lookup+0x20/0x60 [<ffffffff802882a7>] ? do_lookup+0x1b7/0x210 [<ffffffff8028883d>] ? __link_path_walk+0x53d/0x7f0 [<ffffffff80295eb8>] ? mntput_no_expire+0x28/0x130 [<ffffffff80288b4a>] ? path_walk+0x5a/0xc0 [<ffffffff80288dd3>] ? do_path_lookup+0x83/0x1c0 [<ffffffff80287785>] ? getname+0xe5/0x210 [<ffffffff80289adb>] ? __user_walk_fd+0x4b/0x80 [<ffffffff8028236c>] ? vfs_lstat_fd+0x2c/0x70 [<ffffffff8028bf1e>] ? filldir+0xae/0xf0 [<ffffffff802b92e9>] ? de_put+0x9/0x50 [<ffffffff8029633d>] ? mnt_want_write+0x2d/0x80 [<ffffffff8029339f>] ? touch_atime+0x1f/0x170 [<ffffffff802b9b1d>] ? proc_root_readdir+0x7d/0xa0 [<ffffffff802825e7>] ? sys_newlstat+0x27/0x50 [<ffffffff8028bffb>] ? vfs_readdir+0x9b/0xd0 [<ffffffff8028c0fe>] ? sys_getdents+0xce/0xe0 [<ffffffff8020b39b>] ? system_call_after_swapgs+0x7b/0x80 Code: b7 83 b2 00 00 00 25 00 f0 00 00 3d 00 80 00 00 74 19 48 89 93 f0 00 00 00 48 89 df e8 39 9a fd ff 48 89 d8 48 83 c4 08 5b 5d c3 <48> 83 7a 50 00 48 c7 c0 60 16 45 80 48 c7 c2 40 17 45 80 48 0f RIP [<ffffffff802b92a1>] proc_get_inode+0x101/0x130 RSP <ffff81017c4bfc78> CR2: ffffffffa0094370 ---[ end trace c71hiarjan8ab739 ]--- Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> "Antonino A. Daplas" <adaplas@pol.net> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-