When CEC_RECEIVE returns a message the original timeout field
was overwritten. Restore the timeout field.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Now driver returns correct values for DVB-C:
 SNR (in dB)

[mchehab@s-opensource.com: fix a new function to be static]
Signed-off-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

now driver returns correct values for DVB-C:
 BER (post_bit_count and post_bit_error values)
 UCB (count of uncorrected errors)
also, some code cleanup was done - checkpatch.pl now is happy
Signed-off-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

DVB-C should use cxd2841er_read_agc_gain_c() to get the gain. The same
function is used for all DVB-C annex delivery systems.
Signed-off-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The scale for ISDB-T was wrong too: it was inverted, and
on a relative scale.

Use a linear interpolation to make it look better.
The formula was empirically determined, using 3 frequencies
(175 MHz, 410 MHz and 800 MHz), measuring from -50dBm to
-12dBm in steps of 0.5dB.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of using a relative frequency range, calibrate it to
show the results in dB. The callibration was done getting
samples with a signal generated from -50dBm to -12dBm,
incremented in steps of 0.5 dB, using 3 frequencies:
175 MHz, 410 MHz and 800 MHz. The modulated signal was
using QAM64, and it was used a linear interpolation of all
the results.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Currently, there's no stats for DVB-C. Let's at least return
signal strength. The scale is different than on DVB-T, so let's
use a relative scale, for now.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

What userspace expects is to receive both bit_error and bit_count
counters. So, instead of doing the division at the Kernel,
return the counters for userspace to handle it the way it
wants.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Appling the mask 0x0f to the immediate return of the call to
mb86a20s_readreg will always result in a positive value, meaning that the
check of ret < 0 will never work.  Instead, check for a -ve return value
first, and then mask val with 0x0f.

Kudos to Mauro Carvalho Chehab for spotting the mistake in my original fix.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch addresses CVE-2016-5400, a local DOS vulnerability caused by
a memory leak in the airspy usb device driver.

The vulnerability is triggered when more than 64 usb devices register
with v4l2 of type VFL_TYPE_SDR or VFL_TYPE_SUBDEV.A badusb device can
emulate 64 of these devices then through continual emulated
connect/disconnect of the 65th device, cause the kernel to run out of
RAM and crash the kernel.

The vulnerability exists in kernel versions from 3.17 to current 4.7.

The memory leak is caused by the probe function of the airspy driver
mishandeling errors and not freeing the corresponding control structures
when an error occours registering the device to v4l2 core.
Signed-off-by: NJames Patrick-Evans <james@jmp-e.com>
Cc: stable@vger.kernel.org # Up to Kernel 3.17
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Mention that the HDMI driver should pass on the physical address
to this driver, rather than requiring userspace to do this.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: Kamil Debski <k.debski@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The CEC documentation has been converted to sphinx, so this
TODO item can be dropped.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Attempts to send CEC messages to yourself are detected in the framework and
returned with a NACK error. However, the tx_ts was never filled in that case.
So just set it.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix typo in vivid that caused all HDMI outputs to have the same
physical address.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When calculate OUTPUT buffer size in vidioc_try_fmt, it will
add more size hw need in each plane.
But in mtk_vcodec_enc_set_default_params, it do not add
same size in each plane.
This makes v4l2-compliance test fail.
This patch fix the issue.
Signed-off-by: NTiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There is really no reason to zero the reply and timeout fields if an
error occurs. This is a left-over from earlier versions where that
was used to signal errors, but this is now handled by the rx/tx_status
fields.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The newly added mtk-vcodec driver produces a number of warnings in an
ARM allmodconfig build, mainly since it assumes that dma_addr_t is
32-bit wide:

mtk-vcodec/venc/venc_vp8_if.c: In function 'vp8_enc_alloc_work_buf':
mtk-vcodec/venc/venc_vp8_if.c:212:191: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
mtk-vcodec/venc/venc_h264_if.c: In function 'h264_enc_alloc_work_buf':
mtk-vcodec/venc/venc_h264_if.c:297:190: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]

This rearranges the format strings and type casts to what they should
have been in order to avoid the warnings. e0f80d8d ("[media]
mtk-vcodec: fix two compiler warnings") fixed some of the problems that
were introduced at the same time, but missed two others.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of hardcoding a timeout, let userspace change it dynamically
by adding a s_timeout ops.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The redrat3 sends an usb packet to the host either when the minimum pause
or the timeout occurs, so we can always add a trailing space in our
processing.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

LIRC_SET_SEND_CARRIER should return 0 on success or -errno.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When s_tx_mask is given an invalid bitmask, the number of transmitters
should be returned. See the LIRC_SET_TRANSMITTER_MASK lirc ioctl
documentation.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The value 5 of the EEPROM_TS_MODE register (meaning dual tuner presence) is
only valid for AF9035 devices. For IT9135 devices it is invalid and led to a
false positive dual tuner mode detection with PCTV 79e.
Therefore on non-AF9035 devices and with value 5 the driver now defaults to
single tuner mode and outputs a regarding info message to log.

This fixes Bugzilla bug #118561.
Reported-by: NMarc Duponcheel <marc@offline.be>
Signed-off-by: NStefan Pöschel <basic.master@gmx.de>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

If a system configures the Nuvoton chip to use the alternative
EFM IO address (CR_EFIR2) then after probing the primary EFM IO
address (CR_EFIR) this region is not released.

If a driver for another function of the Nuvoton Super I/O
chip uses the same probing mechanism then it will hang if
loaded after the nuvoton-cir driver.
This was reported for the nct6775 hwmon driver.

Fix this by properly releasing the region after probing CR_EFIR.
This regression was introduced with kernel 4.6 so cc it to stable.
Reported-by: NAntti Seppälä <a.seppala@gmail.com>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Tested-by: NAntti Seppälä <a.seppala@gmail.com>
Cc: <stable@vger.kernel.org> # 4.6.x-
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Don't free the object until the file handle has been closed.  Fixes
use-after-free bug which occurs when I disconnect my DVB-S received
while VDR is running.

This is a crash dump of such a use-after-free:

    general protection fault: 0000 [#1] SMP
    CPU: 0 PID: 2541 Comm: CI adapter on d Not tainted 4.7.0-rc1-hosting+ #49
    Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
    task: ffff880027d7ce00 ti: ffff88003d8f8000 task.ti: ffff88003d8f8000
    RIP: 0010:[<ffffffff812f3d1f>]  [<ffffffff812f3d1f>] dvb_ca_en50221_io_read_condition.isra.7+0x6f/0x150
    RSP: 0018:ffff88003d8fba98  EFLAGS: 00010206
    RAX: 0000000059534255 RBX: 000000753d470f90 RCX: ffff88003c74d181
    RDX: 00000001bea04ba9 RSI: ffff88003d8fbaf4 RDI: 3a3030a56d763fc0
    RBP: ffff88003d8fbae0 R08: ffff88003c74d180 R09: 0000000000000000
    R10: 0000000000000001 R11: 0000000000000000 R12: ffff88003c480e00
    R13: 00000000ffffffff R14: 0000000059534255 R15: 0000000000000000
    FS:  00007fb4209b4700(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007f06445f4078 CR3: 000000003c55b000 CR4: 00000000000006b0
    Stack:
     ffff88003d8fbaf4 000000003c2170c0 0000000000004000 0000000000000000
     ffff88003c480e00 ffff88003d8fbc80 ffff88003c74d180 ffff88003d8fbb8c
     0000000000000000 ffff88003d8fbb10 ffffffff812f3e37 ffff88003d8fbb00
    Call Trace:
     [<ffffffff812f3e37>] dvb_ca_en50221_io_poll+0x37/0xa0
     [<ffffffff8113109b>] do_sys_poll+0x2db/0x520

This is a backtrace of the kernel attempting to lock a freed mutex:

    #0  0xffffffff81083d40 in rep_nop () at ./arch/x86/include/asm/processor.h:569
    #1  cpu_relax () at ./arch/x86/include/asm/processor.h:574
    #2  virt_spin_lock (lock=<optimized out>) at ./arch/x86/include/asm/qspinlock.h:57
    #3  native_queued_spin_lock_slowpath (lock=0xffff88003c480e90, val=761492029) at kernel/locking/qspinlock.c:304
    #4  0xffffffff810d1a06 in pv_queued_spin_lock_slowpath (val=<optimized out>, lock=<optimized out>) at ./arch/x86/include/asm/paravirt.h:669
    #5  queued_spin_lock_slowpath (val=<optimized out>, lock=<optimized out>) at ./arch/x86/include/asm/qspinlock.h:28
    #6  queued_spin_lock (lock=<optimized out>) at include/asm-generic/qspinlock.h:107
    #7  __mutex_lock_common (use_ww_ctx=<optimized out>, ww_ctx=<optimized out>, ip=<optimized out>, nest_lock=<optimized out>, subclass=<optimized out>,
        state=<optimized out>, lock=<optimized out>) at kernel/locking/mutex.c:526
    #8  mutex_lock_interruptible_nested (lock=0xffff88003c480e88, subclass=<optimized out>) at kernel/locking/mutex.c:647
    #9  0xffffffff812f49fe in dvb_ca_en50221_io_do_ioctl (file=<optimized out>, cmd=761492029, parg=0x1 <irq_stack_union+1>)
        at drivers/media/dvb-core/dvb_ca_en50221.c:1210
    #10 0xffffffff812ee660 in dvb_usercopy (file=<optimized out>, cmd=761492029, arg=<optimized out>, func=<optimized out>) at drivers/media/dvb-core/dvbdev.c:883
    #11 0xffffffff812f3410 in dvb_ca_en50221_io_ioctl (file=<optimized out>, cmd=<optimized out>, arg=<optimized out>) at drivers/media/dvb-core/dvb_ca_en50221.c:1284
    #12 0xffffffff8112eddd in vfs_ioctl (arg=<optimized out>, cmd=<optimized out>, filp=<optimized out>) at fs/ioctl.c:43
    #13 do_vfs_ioctl (filp=0xffff88003c480e90, fd=<optimized out>, cmd=<optimized out>, arg=<optimized out>) at fs/ioctl.c:674
    #14 0xffffffff8112f30c in SYSC_ioctl (arg=<optimized out>, cmd=<optimized out>, fd=<optimized out>) at fs/ioctl.c:689
    #15 SyS_ioctl (fd=6, cmd=2148298626, arg=140734533693696) at fs/ioctl.c:680
    #16 0xffffffff8103feb2 in entry_SYSCALL_64 () at arch/x86/entry/entry_64.S:207
Signed-off-by: NMax Kellermann <max@duempel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The wait_event() call in dvb_unregister_frontend() waits synchronously
for other tasks to free a file descriptor, but it does that while
holding several mutexes.  That alone is a bad idea, but if one user
process happens to keep a (defunct) file descriptor open indefinitely,
the kernel will correctly detect a hung task:

    INFO: task kworker/0:1:314 blocked for more than 30 seconds.
          Not tainted 4.7.0-rc1-hosting+ #50
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    kworker/0:1     D ffff88003daf7a50     0   314      2 0x00000000
    Workqueue: usb_hub_wq hub_event
     ffff88003daf7a50 0000000000000296 ffff88003daf7a30 ffff88003fc13f98
     ffff88003dadce00 ffff88003daf8000 ffff88003e3fc010 ffff88003d48d4f8
     ffff88003e3b5030 ffff88003e3f8898 ffff88003daf7a68 ffffffff810cf860
    Call Trace:
     [<ffffffff810cf860>] schedule+0x30/0x80
     [<ffffffff812f88d3>] dvb_unregister_frontend+0x93/0xc0
     [<ffffffff8107a000>] ? __wake_up_common+0x80/0x80
     [<ffffffff813019c7>] dvb_usb_adapter_frontend_exit+0x37/0x70
     [<ffffffff81300614>] dvb_usb_exit+0x34/0xb0
     [<ffffffff81300d4a>] dvb_usb_device_exit+0x3a/0x50
     [<ffffffff81302dc2>] pctv452e_usb_disconnect+0x52/0x60
     [<ffffffff81295a07>] usb_unbind_interface+0x67/0x1e0
     [<ffffffff810609f3>] ? __blocking_notifier_call_chain+0x53/0x70
     [<ffffffff8127ba67>] __device_release_driver+0x77/0x110
     [<ffffffff8127c2d3>] device_release_driver+0x23/0x30
     [<ffffffff8127ab5d>] bus_remove_device+0x10d/0x150
     [<ffffffff8127879b>] device_del+0x13b/0x260
     [<ffffffff81299dea>] ? usb_remove_ep_devs+0x1a/0x30
     [<ffffffff8129468e>] usb_disable_device+0x9e/0x1e0
     [<ffffffff8128bb09>] usb_disconnect+0x89/0x260
     [<ffffffff8128db8d>] hub_event+0x30d/0xfc0
     [<ffffffff81059475>] process_one_work+0x1c5/0x4a0
     [<ffffffff8105940c>] ? process_one_work+0x15c/0x4a0
     [<ffffffff81059799>] worker_thread+0x49/0x480
     [<ffffffff81059750>] ? process_one_work+0x4a0/0x4a0
     [<ffffffff81059750>] ? process_one_work+0x4a0/0x4a0
     [<ffffffff8105f65e>] kthread+0xee/0x110
     [<ffffffff810400bf>] ret_from_fork+0x1f/0x40
     [<ffffffff8105f570>] ? __kthread_unpark+0x70/0x70
    5 locks held by kworker/0:1/314:
     #0:  ("usb_hub_wq"){......}, at: [<ffffffff8105940c>] process_one_work+0x15c/0x4a0
     #1:  ((&hub->events)){......}, at: [<ffffffff8105940c>] process_one_work+0x15c/0x4a0
     #2:  (&dev->mutex){......}, at: [<ffffffff8128d8cb>] hub_event+0x4b/0xfc0
     #3:  (&dev->mutex){......}, at: [<ffffffff8128bad2>] usb_disconnect+0x52/0x260
     #4:  (&dev->mutex){......}, at: [<ffffffff8127c2cb>] device_release_driver+0x1b/0x30

This patch removes the blocking wait, and postpones the kfree() call
until all file handles have been closed by using struct kref.
Signed-off-by: NMax Kellermann <max@duempel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Signed-off-by: NAayush Gupta <aayustark007@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The LIRC_CAN_REC() returns a boolean "flag & LIRC_CAN_REC_MASK"
to check whether the device can receive data.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When opening or closing a lirc character device, the framework
provides to the user the possibility to keep track of opening or
closing of the device by calling two functions:

 - set_use_inc() when opening the device
 - set_use_dec() when closing the device

if those are not set by the lirc user, the system segfaults.
Check the pointer value before calling the above functions.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

If ioctl is called, it cannot be a case of invalid system call
number (ENOSYS), that is a ENOTTY case which means that the
device doesn't support that specific ioctl command.

So, replace ENOSYS with ENOTTY.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When comparing a variable with a constant, the comparison should
start from the variable and not from the constant. It's also
written in the human DNA.

Swap the terms of comparisons whenever the constant comes first
and fix the following checkpatch warning:

  WARNING: Comparisons should place the constant on the right side of the test
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The three if statements check the same thing, merge them in only
one statement.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are two if ... else which check the same thing in different
part of the code, they can be merged in a single check.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The whole function is inside an 'if' statement
("if (ir->d.add_to_buf)").

Check the opposite of that statement at the beginning and exit,
this way we can have one level less of indentation.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

... use "do .. while" instead.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The code can be rearranged so that some goto paths can be removed
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch mutes also all the checkpatch warnings related to
printk.

Reword all the printouts so that the string doesn't need to be
split, which fixes the following checkpatch warning:

  WARNING: quoted string split across lines
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Transmitters don't necessarily need to have a FIFO managed buffer
for their transfers.

When registering the driver, before allocating the buffer, check
whether the device is a transmitter or receiver. Allocate the
buffer only for receivers.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

During the driver registration, move the buffer allocation on a
separate function.
Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>