The dma_map_sg() and dma_unmap_sg() functions need a pointer to the
physical device.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Store the active format in the channel structure, and use it instead of
parsing info->var all over the place when the format is needed.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The function returns a pointer to a structure describing a format based
on its fourcc. Use the function where applicable instead of hardcoded
switch-case statements.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Group fields by purpose, and make the separation between core fields and
FB-related fields clear.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The struct sh_mobile_lcdc_chan_cfg platform data contains a list of
video modes. Name the lcd_cfg and num_cfg fields to reflect that they
describe video modes.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Embed struct fb_videomode instead of struct fb_var_screeninfo in struct
sh_mobile_lcdc_chan to store the display mode.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The LCDC fb_info structure is only used to retrieve the default video
mode in case none of the modes advertised by EDID information is
acceptable. Pass a pointer to the default mode through the
sh_mobile_lcdc_entity structure instead.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The struct sh_hdmi mode field is only used after being assigned by the
EDID read code. There is thus no need to initialize it from the LCDC
display var in the display on handler.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Pass pointers to struct fb_videomode and struct fb_monspecs instead of
struct fb_var_screeninfo to the notify callback.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Instead of accessing the LCDC channel and fb_info structures directly,
use the LCDC notification callback to inform the LCDC driver about
display-related events.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The callback implements 3 notification events:

- SH_MOBILE_LCDC_EVENT_DISPLAY_CONNECT notifies the LCDC that the
  display has been connected
- SH_MOBILE_LCDC_EVENT_DISPLAY_DISCONNECT notifies the LCDC that the
  display has been disconnected
- SH_MOBILE_LCDC_EVENT_DISPLAY_MODE notifies that LCDC that a display
  mode has been detected
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Return true if the display is connected and false otherwise. Set the fb
info state to FBINFO_STATE_SUSPENDED in the sh_mobile_lcdc driver when
the display is not connected.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The parameter is unused, remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The fb_info parameter passed to the display_on operation will be
removed, don't use it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The field will be used by the transmitter drivers to access
sh_mobile_lcdc_chan fields such as fb_info.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Update board code accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Update board code accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The field is unused, remove it. Update board code accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The field is unused, remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The field is unused, remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The field is unused and will be removed. Don't initialize it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The display_on/off operations are now accessed through the
sh_mobile_lcdc_entity operations.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The display_on/off operations are now accessed through the
sh_mobile_lcdc_entity operations.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Make sure the transmitter devices get registered before the associated
LCDC devices.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Pass a pointer to the transmitter device through platform data, retrieve
the corresponding sh_mobile_lcdc_entity structure in the probe method
and call the transmitter display_on/off methods directly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The sh_mobile_lcdc_entity structure will be used to abstract operations
performed by transceivers (such as MIPI/DSI and HDMI).
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The field is used to print debug messages only. Remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Instead of relying on info->par being a pointer to an LCDC channel, cast
the notifier block pointer to an sh_hdmi pointer.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Pass a pointer to a struct sh_mobile_lcdc_priv instead, which stores a
pointer to the device.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The pm_runtime_enable() and pm_runtime_resume() calls don't belong to
sh_mobile_lcdc_setup_clocks(). Move them to the probe function. Remove
the unneeded pm_runtime_resume() call.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

default_720p and sh_mobile_lcdc_check_interface are used at device
initialization time only. Mark them as __devinitconst and __devinit
respectively.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Make the driver more readable by reordering code and splitting it into
logical sections. Reorder the headers alphabetically.

No modification to the code have been performed.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

uvesafb_open may failed to save hardware state when kmalloc failed
in uvesafb_vbe_state_save, we should check this and notice user.
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch fixes the oops below

[   81.560602] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev   , OEM: NVIDIA, VBE v3.0
[   81.609384] uvesafb: protected mode interface info at c000:d350
[   81.609388] uvesafb: pmi: set display start = c00cd3b3, set palette = c00cd40e
[   81.609390] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[   81.614558] uvesafb: VBIOS/hardware doesn't support DDC transfers
[   81.614562] uvesafb: no monitor limits have been set, default refresh rate will be used
[   81.614994] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915
[   81.744147] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[   81.744153] BUG: unable to handle kernel paging request at c00cd3b3
[   81.744159] IP: [<c00cd3b3>] 0xc00cd3b2
[   81.744167] *pdpt = 00000000016d6001 *pde = 0000000001c7b067 *pte = 80000000000cd163
[   81.744171] Oops: 0011 [#1] SMP
[   81.744174] Modules linked in: uvesafb(+) cfbcopyarea cfbimgblt cfbfillrect
[   81.744178]
[   81.744181] Pid: 3497, comm: modprobe Not tainted 3.3.0-rc4NX+ #71 Acer            Aspire 4741                    /Aspire 4741
[   81.744185] EIP: 0060:[<c00cd3b3>] EFLAGS: 00010246 CPU: 0
[   81.744187] EIP is at 0xc00cd3b3
[   81.744189] EAX: 00004f07 EBX: 00000000 ECX: 00000000 EDX: 00000000
[   81.744191] ESI: f763f000 EDI: f763f6e8 EBP: f57f3a0c ESP: f57f3a00
[   81.744192]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[   81.744195] Process modprobe (pid: 3497, ti=f57f2000 task=f748c600 task.ti=f57f2000)
[   81.744196] Stack:
[   81.744197]  f82512c5 f759341c 00000000 f57f3a30 c124a9bc 00000001 00000001 000001e0
[   81.744202]  f8251280 f763f000 f7593400 00000000 f57f3a40 c12598dd f5c0c000 00000000
[   81.744206]  f57f3b10 c1255efe c125a21a 00000006 f763f09c 00000000 c1c6cb60 f7593400
[   81.744210] Call Trace:
[   81.744215]  [<f82512c5>] ? uvesafb_pan_display+0x45/0x60 [uvesafb]
[   81.744222]  [<c124a9bc>] fb_pan_display+0x10c/0x160
[   81.744226]  [<f8251280>] ? uvesafb_vbe_find_mode+0x180/0x180 [uvesafb]
[   81.744230]  [<c12598dd>] bit_update_start+0x1d/0x50
[   81.744232]  [<c1255efe>] fbcon_switch+0x39e/0x550
[   81.744235]  [<c125a21a>] ? bit_cursor+0x4ea/0x560
[   81.744240]  [<c129b6cb>] redraw_screen+0x12b/0x220
[   81.744245]  [<c128843b>] ? tty_do_resize+0x3b/0xc0
[   81.744247]  [<c129ef42>] vc_do_resize+0x3d2/0x3e0
[   81.744250]  [<c129efb4>] vc_resize+0x14/0x20
[   81.744253]  [<c12586bd>] fbcon_init+0x29d/0x500
[   81.744255]  [<c12984c4>] ? set_inverse_trans_unicode+0xe4/0x110
[   81.744258]  [<c129b378>] visual_init+0xb8/0x150
[   81.744261]  [<c129c16c>] bind_con_driver+0x16c/0x360
[   81.744264]  [<c129b47e>] ? register_con_driver+0x6e/0x190
[   81.744267]  [<c129c3a1>] take_over_console+0x41/0x50
[   81.744269]  [<c1257b7a>] fbcon_takeover+0x6a/0xd0
[   81.744272]  [<c12594b8>] fbcon_event_notify+0x758/0x790
[   81.744277]  [<c10929e2>] notifier_call_chain+0x42/0xb0
[   81.744280]  [<c1092d30>] __blocking_notifier_call_chain+0x60/0x90
[   81.744283]  [<c1092d7a>] blocking_notifier_call_chain+0x1a/0x20
[   81.744285]  [<c124a5a1>] fb_notifier_call_chain+0x11/0x20
[   81.744288]  [<c124b759>] register_framebuffer+0x1d9/0x2b0
[   81.744293]  [<c1061c73>] ? ioremap_wc+0x33/0x40
[   81.744298]  [<f82537c6>] uvesafb_probe+0xaba/0xc40 [uvesafb]
[   81.744302]  [<c12bb81f>] platform_drv_probe+0xf/0x20
[   81.744306]  [<c12ba558>] driver_probe_device+0x68/0x170
[   81.744309]  [<c12ba731>] __device_attach+0x41/0x50
[   81.744313]  [<c12b9088>] bus_for_each_drv+0x48/0x70
[   81.744316]  [<c12ba7f3>] device_attach+0x83/0xa0
[   81.744319]  [<c12ba6f0>] ? __driver_attach+0x90/0x90
[   81.744321]  [<c12b991f>] bus_probe_device+0x6f/0x90
[   81.744324]  [<c12b8a45>] device_add+0x5e5/0x680
[   81.744329]  [<c122a1a3>] ? kvasprintf+0x43/0x60
[   81.744332]  [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70
[   81.744335]  [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70
[   81.744339]  [<c12bbe9f>] platform_device_add+0xff/0x1b0
[   81.744343]  [<f8252906>] uvesafb_init+0x50/0x9b [uvesafb]
[   81.744346]  [<c100111f>] do_one_initcall+0x2f/0x170
[   81.744350]  [<f82528b6>] ? uvesafb_is_valid_mode+0x66/0x66 [uvesafb]
[   81.744355]  [<c10c6994>] sys_init_module+0xf4/0x1410
[   81.744359]  [<c1157fc0>] ? vfsmount_lock_local_unlock_cpu+0x30/0x30
[   81.744363]  [<c144cb10>] sysenter_do_call+0x12/0x36
[   81.744365] Code: f5 00 00 00 32 f6 66 8b da 66 d1 e3 66 ba d4 03 8a e3 b0 1c 66 ef b0 1e 66 ef 8a e7 b0 1d 66 ef b0 1f 66 ef e8 fa 00 00 00 61 c3 <60> e8 c8 00 00 00 66 8b f3 66 8b da 66 ba d4 03 b0 0c 8a e5 66
[   81.744388] EIP: [<c00cd3b3>] 0xc00cd3b3 SS:ESP 0068:f57f3a00
[   81.744391] CR2: 00000000c00cd3b3
[   81.744393] ---[ end trace 18b2c87c925b54d6 ]---
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: stable@vger.kernel.org

Return a negative errno instead of zero in the write function of
the sysfs entry in case of error.
Also add a check on the return value of dlfb_setup_modes().
Signed-off-by: NOlivier Sobrie <olivier@sobrie.be>
Acked-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Add Inki Dae, Donghwa Lee and Kyungmin Park as maintainers who developers
for exynos mipi display drivers for video/driver/exynos/exynos_mipi* and
include/video/exynos_mipi*.
Signed-off-by: NDonghwa Lee <dh09.lee@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>