Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

The mxc-keypad device seems to be the result of an early and partial
merge of the keypad driver.  It's unused and there is no corresponding
driver available, so just remove it.

Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

To use common macros to define the gpio ports for imx{1,21,25,27} the
existing ones had to made more general and a few more base address defines
were necessary.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

According to the reference manual of the i.MX25 the host controller uses an
offset of 0x200 not 0x400 as was specified in the resources for mxc_usbh2.

Needs-Testing: yes
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This finally gets rid of mach-imx/devices.c.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

... plus a trivial simplification of mx21ads_sdhc_init()
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This function should be marked as __init because it is used only
in the init phase.

This fix the compiler warning:
 LD      arch/arm/mach-mx3/built-in.o
 WARNING: arch/arm/mach-mx3/built-in.o(.text+0x1328): Section mismatch in reference from the function eet_init_devices() to the (unknown reference) .init.rodata:(unknown)
 The function eet_init_devices() references
 the (unknown reference) __initconst (unknown).
 This is often because eet_init_devices lacks a __initconst
 annotation or the annotation of (unknown) is wrong.
Signed-off-by: NAlberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

SPI_IMX defaults to m for i.MX machines.  So enabling SPI is enough.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Group soc specific data in a global struct instead of repeating it for each
call to imxXX_add_flexcanX.  The structs holding the actual data are placed
in .init.constdata and so don't do much harm.  Compared to the previous
approach this reduces code size to call imx_add_flexcan.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Currently there is no platform data used in the driver.  In case this
changes and for consistency NULL is passed unused to the soc specific
functions.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This is only available for mx1 machines with no in-tree user.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

all these don't have a driver and are not added in any machine file.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Currently there is no platform data used in the driver.  In case this
changes NULL is passed unused to the soc specific functions.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This gets rid of the last user of IMX_NEEDS_DEPRECATED_SYMBOLS.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Now only the virtual addresses [0xf4000000, 0xf5ffffff] are used for
static per-SoC mappings.  The few mappings of whole chip selects are
moved accordingly.

The now wrong defines for virtual base addresses are removed.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This allows changing the mapping without the need to adapt all users.

While at it remove some unneeded casts to void __iomem *, this is already
taken care for in the IO_ADDRESS macros
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes less code rely on the virtual constants.

To further simplify code and reduce the needed boilerplate when
defining the static mappings a new helper macro is defined in
mach/hardware.h.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes it more assembler friendly and allows it to be used in situation
that need an unsigned long and not a pointer.  Also the naming is
clearer.  IOMEM is introduced without IMX_ prefix as it is used this way
in more than one ARM subarch and it might become globally available
soon.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Merge branch 'l2x0-pull-rmk' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into devel-stable

Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable

Conflicts:
	arch/arm/mach-s3c64xx/dev-audio.c

usbfs_get_inode() is something completely different...

Bogosity introduced by commit 85fe4025 ("fs: do not assign default
i_ino in new_inode").
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (476 commits)
  vmwgfx: Implement a proper GMR eviction mechanism
  drm/radeon/kms: fix r6xx/7xx 1D tiling CS checker v2
  drm/radeon/kms: properly compute group_size on 6xx/7xx
  drm/radeon/kms: fix 2D tile height alignment in the r600 CS checker
  drm/radeon/kms/evergreen: set the clear state to the blit state
  drm/radeon/kms: don't poll dac load detect.
  gpu: Add Intel GMA500(Poulsbo) Stub Driver
  drm/radeon/kms: MC vram map needs to be >= pci aperture size
  drm/radeon/kms: implement display watermark support for evergreen
  drm/radeon/kms/evergreen: add some additional safe regs v2
  drm/radeon/r600: fix tiling issues in CS checker.
  drm/i915: Move gpu_write_list to per-ring
  drm/i915: Invalidate the to-ring, flush the old-ring when updating domains
  drm/i915/ringbuffer: Write the value passed in to the tail register
  agp/intel: Restore valid PTE bit for Sandybridge after bdd30729
  drm/i915: Fix flushing regression from 9af90d19
  drm/i915/sdvo: Remove unused encoding member
  i915: enable AVI infoframe for intel_hdmi.c [v4]
  drm/i915: Fix current fb blocking for page flip
  drm/i915: IS_IRONLAKE is synonymous with gen == 5
  ...

Fix up conflicts in
 - drivers/gpu/drm/i915/{i915_gem.c, i915/intel_overlay.c}: due to the
   new simplified stack-based kmap_atomic() interface
 - drivers/gpu/drm/vmwgfx/vmwgfx_drv.c: added .llseek entry due to BKL
   removal cleanups.

Merge branches 'upstream/xenfs' and 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen

* 'upstream/xenfs' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen/privcmd: make privcmd visible in domU
  xen/privcmd: move remap_domain_mfn_range() to core xen code and export.
  privcmd: MMAPBATCH: Fix error handling/reporting
  xenbus: export xen_store_interface for xenfs
  xen/privcmd: make sure vma is ours before doing anything to it
  xen/privcmd: print SIGBUS faults
  xen/xenfs: set_page_dirty is supposed to return true if it dirties
  xen/privcmd: create address space to allow writable mmaps
  xen: add privcmd driver
  xen: add variable hypercall caller
  xen: add xen_set_domain_pte()
  xen: add /proc/xen/xsd_{kva,port} to xenfs

* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (29 commits)
  xen: include xen/xen.h for definition of xen_initial_domain()
  xen: use host E820 map for dom0
  xen: correctly rebuild mfn list list after migration.
  xen: improvements to VIRQ_DEBUG output
  xen: set up IRQ before binding virq to evtchn
  xen: ensure that all event channels start off bound to VCPU 0
  xen/hvc: only notify if we actually sent something
  xen: don't add extra_pages for RAM after mem_end
  xen: add support for PAT
  xen: make sure xen_max_p2m_pfn is up to date
  xen: limit extra memory to a certain ratio of base
  xen: add extra pages for E820 RAM regions, even if beyond mem_end
  xen: make sure xen_extra_mem_start is beyond all non-RAM e820
  xen: implement "extra" memory to reserve space for pages not present at boot
  xen: Use host-provided E820 map
  xen: don't map missing memory
  xen: defer building p2m mfn structures until kernel is mapped
  xen: add return value to set_phys_to_machine()
  xen: convert p2m to a 3 level tree
  xen: make install_p2mtop_page() static
  ...

Fix up trivial conflict in arch/x86/xen/mmu.c, and fix the use of
'reserve_early()' - in the new memblock world order it is now
'memblock_x86_reserve_range()' instead. Pointed out by Jeremy.

Use Ben's new range manager hooks to implement a manager for
GMRs that manages ids rather than ranges.
This means we can use the standard TTM code for binding, unbinding and
eviction.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>