ARM: imx: remove now empty devices.h

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

arch/arm/mach-imx/devices.c

@@ -42,8 +42,6 @@
 #include <mach/common.h>
 #include <mach/mmc.h>
 
-#include "devices.h"
-
 #if defined(CONFIG_ARCH_MX1)
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {

arch/arm/mach-imx/eukrea_mbimx27-baseboard.c

@@ -36,7 +36,6 @@
 #include <mach/audmux.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int eukrea_mbimx27_pins[] __initconst = {
 	/* UART2 */

arch/arm/mach-imx/mach-cpuimx27.c

@@ -42,7 +42,6 @@
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int eukrea_cpuimx27_pins[] __initconst = {
 	/* UART1 */

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -37,7 +37,6 @@
 #include <mach/iomux.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
 #define SDHC1_IRQ IRQ_GPIOB(25)

arch/arm/mach-imx/mach-imx27lite.c

@@ -25,7 +25,6 @@
 #include <mach/iomux-mx27.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int mx27lite_pins[] __initconst = {
 	/* UART1 */

arch/arm/mach-imx/mach-mx1ads.c

@@ -30,7 +30,6 @@
 #include <mach/irqs.h>
 
 #include "devices-imx1.h"
-#include "devices.h"
 
 static const int mx1ads_pins[] __initconst = {
 	/* UART1 */

arch/arm/mach-imx/mach-mx21ads.c

@@ -28,7 +28,6 @@
 #include <mach/mxc_nand.h>
 
 #include "devices-imx21.h"
-#include "devices.h"
 
 /*
  * Memory-mapped I/O on MX21ADS base board

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -31,7 +31,6 @@
 #include <mach/iomux-mx27.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 #define SD1_EN_GPIO (GPIO_PORTB + 25)
 

arch/arm/mach-imx/mach-mx27ads.c

@@ -32,7 +32,6 @@
 #include <mach/mxc_nand.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 /*
  * Base address of PBC controller, CS4

arch/arm/mach-imx/mach-mxt_td60.c

@@ -33,7 +33,6 @@
 #include <linux/i2c/pca953x.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int mxt_td60_pins[] __initconst = {
 	/* UART0 */

arch/arm/mach-imx/mach-pca100.c

@@ -42,7 +42,6 @@
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
 #define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)

arch/arm/mach-imx/mach-pcm038.c

@@ -40,7 +40,6 @@
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int pcm038_pins[] __initconst = {
 	/* UART1 */

arch/arm/mach-imx/mach-scb9328.c

@@ -25,7 +25,6 @@
 #include <mach/iomux-mx1.h>
 
 #include "devices-imx1.h"
-#include "devices.h"
 
 /*
  * This scb9328 has a 32MiB flash

arch/arm/mach-imx/pcm970-baseboard.c

@@ -28,7 +28,6 @@
 #include <mach/hardware.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int pcm970_pins[] __initconst = {
 	/* SDHC */