- 11 4月, 2010 31 次提交
-
-
由 James Smart 提交于
Only abort outstanding I/O to force the OS to retry failed I/Os for AER uncorrectable non-fatal errors instead of reseting the adapter. Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
- Add BSG support for PCI loopback testing. - Add BSG support for extended mailbox commands. Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
- Correct all SLI4 code to work on big endian systems. - Move read of sli4 params earlier so returned values are used correctly. Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 James Smart 提交于
FCF failover improvements - Add random FCF failover when there are multiple FCFs available. - Prevent FCF log messages from being displayed for FC adapters. - Separate the New FCF and Modified FCF log messages. Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Joe Eykholt 提交于
When the kernel is configured for preemption, using smp_processor_id() when preemption is enabled causes a warning backtrace and is wrong since we could move off of that CPU as soon as we get the ID, and we would be referencing the wrong CPU, and possibly an invalid one if it could be hotswapped out. Remove the fc_lport_get_stats() function and explicitly use per_cpu_ptr() to get the statistics. Where preemption has been disabled by holding a _bh lock continue to use smp_processor_id(), but otherwise use get_cpu()/put_cpu(). In fcoe_recv_frame() also changed the cases where we return in the middle to do a goto to the code which bumps ErrorFrames and does a put_cpu(). Two of these cases didn't bump ErrorFrames before, but doing so is harmless because they "can't happen", due to prior length checks. Also rearranged code in fcoe_recv_frame() to have only one call to fc_exch_recv(). It's just as efficient and saves a call to put_cpu(). In fc_fcp.c, adjusted a FIXME comment for code which doesn't need fixing. Signed-off-by: NJoe Eykholt <jeykholt@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Robert Love 提交于
DID_ERROR cases can be ambigouos. Debugging FCP error cases will be much easier if we have debug statements when we hit these error conditions. This patch simply adds debug messages using the FC_FCP_DBG macro when we return DID_ERROR to SCSI. This way if a DID_ERROR is reproducible turning on debug_logging will give a clue to developers as to what the problem might be. Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Vasu Dev 提交于
Currently fc_fcp_recv_data calls fc_fcp_retry_cmd to retry failed IO but in this case tgt is still sending data frames, therefore exchange needs to be aborted first before initiating retry. So this patch fixes this by aborting exchange first then have retry. Renames fc_timeout_error to fc_fcp_recovery since fc_timeout_error is already called from several other places beside from fcp timeout handler and then used fc_fcp_recovery for abort & retry from fc_fcp_recv_data, this rename also required renaming FC_CMD_TIME_OUT status to FC_CMD_RECOVERY to be consistent with new fc_fcp_recovery. Data frames are not expected for an DDPed exchange and potentially it could be tampered data frame, so does recovery in this case by calling fc_fcp_recovery. Signed-off-by: NVasu Dev <vasu.dev@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Vasu Dev 提交于
Since use of offloads is more efficient than switching to non-offload EM. However kept logic same to call em_match if it is provided in the list of EMs. Converted fc_exch_alloc to inline being now tiny a function and already not an exported libfc API any more. Signed-off-by: NVasu Dev <vasu.dev@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Vasu Dev 提交于
In some cases seq is incremented twice causing unnecessary seq jump, for instance fc_exch_recv_seq_resp increments seq id when fc_sof_is_init is true and that is true for each incoming xfer ready but then fc_fcp_send_data does another seq increment to send data for xfer ready. This patch removes all such seq id jumps, at least it eliminates few calls to fc_seq_start_next using ex_lock. Also removes seq id update with incoming frame's seq id as this is not needed since each end (I or T) just need to send incremented their own seq id on each TSI from other end & before sending new sequence within a exchange. Signed-off-by: NVasu Dev <vasu.dev@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Joe Eykholt 提交于
When starting a new response sequence in a multi-sequence exchange, a warning was issued that sequence initiative wasn't held. The bug was that sequence initiative was cleared by the previous sequence due to the END_SEQ flag being on. The intent may have been to check LAST_SEQ. Change just to check SEQ_INIT. Signed-off-by: NJoe Eykholt <jeykholt@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Joe Eykholt 提交于
The link and last_link fields in the fcoe_ctlr struct are no longer useful, since they are always set to the same value, and FIP always calls libfc to pass link information to the lport. Eliminate those fields and rename link_work to timer_work, since it no longer has any link change work to do. Thanks to Brian Uchino for discovering this issue. Signed-off-by: NJoe Eykholt <jeykholt@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Joe Eykholt 提交于
Remove an unused variable, mac, in fcoe_recv_frame(). Signed-off-by: NJoe Eykholt <jeykholt@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Joe Eykholt 提交于
The method we've been using for point-to-point mode requires that the LS_ACC for the FLOGI uses the D_ID and S_ID assigned to the remote port and local port, not those in the exchange. This is not the correct method, but for now, it's what works with the old target, as well as with new targets based on libfc. This patch changes the addresses used accordingly. Signed-off-by: NJoe Eykholt <jeykholt@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Joe Eykholt 提交于
When receiving a FLOGI request from a point-to-point peer, the D_ID of 0xfffffe was not recognized as belonging to one of the lports, so it was dropped. Change fc_vport_id_lookup() to treat d_id 0xfffffe as a match. Signed-off-by: NJoe Eykholt <jeykholt@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Joe Eykholt 提交于
In point-to-point mode, we need to save the source MAC from received FLOGI requests to use as the destination MAC for all outgoing frames. We stopped doing that at some point. Use the lport_set_port_id method to catch incoming FLOGI frames and pass them to fcoe_ctlr_recv_flogi() so it can save the source MAC. Signed-off-by: NJoe Eykholt <jeykholt@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Joe Eykholt 提交于
The debug message that indicated we are using non-FIP mode was being printed only if we were already in non-FIP mode. Also changed the message text to make it more clear the mode is being set, not that the message is indicating how FLOGI was received. Signed-off-by: NJoe Eykholt <jeykholt@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Joe Eykholt 提交于
In point-to-point mode, the destination MAC address for the FLOGI response was zero because the LS_ACC for the FLOGI wasn't getting intercepted by FIP. Change to call fcoe_ctlr_els_send when sending any ELS, not just requests. Signed-off-by: NJoe Eykholt <jeykholt@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Joe Eykholt 提交于
In point-to-point mode, if the PLOGI to the remote port times out, it can get deleted by the remote port module. Since there's no reference by the local port, lport->ptp_data points to a freed rport, and when the local port is reset and tries to logout again, an oops occurs in mutex_lock_nested(). Hold a reference count on the point-to-point rdata. Signed-off-by: NJoe Eykholt <jeykholt@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Joe Eykholt 提交于
Reduce indentation in fc_rport_recv_prli_req() using gotos. Also add payload length checks. Signed-off-by: NJoe Eykholt <jeykholt@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Richard A Lary 提交于
This patch replaces incorrect base address space flag with correct IO resource flag. Also, performs check of memory resource to validate resource before using. Signed-off-by: NRichard A Lary <rlary@linux.vnet.ibm.com> Acked-by: N"Desai, Kashyap" <Kashyap.Desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Julia Lawall 提交于
The variable bfa_itnim is initialized twice to the same (side effect-free) expression. Drop one initialization. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @forall@ idexpression *x; identifier f!=ERR_PTR; @@ x = f(...) ... when != x ( x = f(...,<+...x...+>,...) | * x = f(...) ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Acked-by: NJing Huang <huangj@brocade.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Roel Kluin 提交于
struct pmcraid_ioctl_header member buffer_length is unsigned, so this check appears redundant. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Acked-by: NAnil Ravindranath <anil_ravindranath@pmc-sierra.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Roel Kluin 提交于
This allows i == MAXHA, which is out of range Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Julia Lawall 提交于
The region set by the call to memset is immediately overwritten by the subsequent call to memcpy. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,e3,e4; @@ - memset(e1,e2,e3); memcpy(e1,e4,e3); // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Acked-by: NJack Wang <jack_wang@usish.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
external host not connecting after controller reboot: The problem is : devices are not coming back after having the cable disconnected then reconnected. The problem is because the driver/firmware device removal handshake is failing. Due to this failure, the controller firmware is not sending out device add events when the target is reconnected. This is root caused to a race in the driver/firmware device removal algorithm. There is duplicate code in both interrupt and user context; where target reset is being issue from user context path while sas_iounit_control(OP_REMOVE) is being sent from interrupt context. An active target_reset will fail the OP_REMOVE. To fix this problem, the duplicate code has been removed from user context path. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Upgraded version string. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
modified _scsih_sas_device_find_by_handle so to handle the search on both list(device list and device_init_list) Also, we moved the priority of the search so the ioc->sas_device_list is done first. The "sas_device_init_list" is only used during the 1st port enable, so its unlikely there’s devices on it. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Kashyap, Desai 提交于
Add the cancel_pending_work flag from the fw_event_work structure, and then to set the flag during host reset, check the flag later from work threads context and if cancel_pending_work_flag is set ingore those events. Now Rescan after host reset is changed. Added special task MPT2SAS_RESCAN_AFTER_HOST_RESET. This task will be queued at the time of HBA reset. this task is treated as barrier. All work after MPT2SAS_RESCAN_AFTER_HOST_RESET will be treated as new work and will be server by callback handle. If host_recovery is going on while running RESCAN task, it will wait for shos_recovery_done completion which will be called from HBA reset DONE context. Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com> Reviewed-by: NEric Moore <eric.moore@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Hannes Reinecke 提交于
The rport structure defines dev_loss_tmo as u32, which is later multiplied with HZ to get the actual timeout value. This might overflow for large dev_loss_tmo values. So we should be better using u64 as intermediate variables here to protect against overflow. Signed-off-by: NHannes Reinecke <hare@suse.de> Acked-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 FUJITA Tomonori 提交于
scsi_dma_map() returns -1 if an error occurred (zero means that the command has no data). So the following current code can't catch an error: sges_left = scsi_dma_map(scmd); if (!sges_left) { sdev_printk(KERN_ERR, scmd->device, "pci_map_sg" " failed: request for %d bytes!\n", scsi_bufflen(scmd)); return -ENOMEM; } Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: N"Desai, Kashyap" <Kashyap.Desai@lsi.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 adam radford 提交于
This small patch forces 60 second timeouts for the older 3w-xxxx & 3w-9xxx drivers for systems that don't contain the udev rule for setting scsi timeouts to 60 seconds. Signed-off-by: NAdam Radford <aradford@gmail.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 09 4月, 2010 4 次提交
-
-
由 Jiri Slaby 提交于
Stanse found that one error path in qla24xx_bsg_timeout omits to unlock ha->hardware_lock. Fix that. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jiri Slaby 提交于
Stanse found that two error paths in lpfc_bsg_rport_els_cmp and lpfc_issue_ct_rsp_cmp omits to unlock phba->ct_ev_lock. It is because they wrongly unlock phba->hbalock instead. Fix that. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jiri Slaby 提交于
Stanse found that one error path in mgmt_invalidate_icds omits to unlock ctrl->mbox_lock. Fix that. Added in 756d29c8 (Enable async mode for mcc rings) where the spinlock was moved. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NJayamohan Kallickal <jayamohank@serverengines.com> Reviewed-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Dan Carpenter 提交于
adpt_i2o_delete_hba() calls kfree() so we have to save "pHba->next" before calling it. Also inside adpt_i2o_delete_hba() itself, there was another use after free bug which I fixed by moving the kfree() down a line. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 28 3月, 2010 4 次提交
-
-
由 Michael Reed 提交于
The qla1280 driver acquires its firmware via udev. During boot the firmware is located in the initrd. If, after root is mounted, the adapter needs to reload firmware (host reset), the firmware load may fail if the root device is on the adapter being reset. This patch modifies qla1280 to retain the firmware loaded via the initial request_firmware() for use during error recovery. [jejb: fix up checkpatch issues] Signed-off-by: NMichael Reed <mdr@sgi.com> Acked-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
On newer kernels users of advansys module are reporting system hang when trying to load it without firmware files present. After looking closely at description on https://qa.mandriva.com/show_bug.cgi?id=53220, I think this is related to commit "[SCSI] advansys: use request_firmware". The problem is that after switch to request_firmware, asc_dvc->err_code isn't being set when firmware files aren't found or loading fails. err_code is used by the driver to judge if there was a fatal error or not, as can be seen for example on advansys_board_found, which will only return -ENODEV when err_code is set. Because err_code isn't being set when request_firmware fails, this is a change of behaviour of the code before request_firmware addition, making it continue to load and it fails later as the firmware wasn't really loaded. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Giridhar Malavali 提交于
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Santosh Vernekar 提交于
The fix prevents application path from sending get-firmware-state mbx command during as isp reset. Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-