提交 e2af0d2e 编写于 作者: J James Smart 提交者: James Bottomley

[SCSI] lpfc 8.3.11: Fix AER uncorrectable non-fatal error handling

Only abort outstanding I/O to force the OS to retry failed I/Os for AER
uncorrectable non-fatal errors instead of reseting the adapter.
Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
上级 7a470277
......@@ -7764,21 +7764,23 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev)
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to prepare the SLI3 device for PCI slot recover. It
* aborts and stops all the on-going I/Os on the pci device.
* aborts all the outstanding SCSI I/Os to the pci device.
**/
static void
lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2723 PCI channel I/O abort preparing for recovery\n");
/* Prepare for bringing HBA offline */
lpfc_offline_prep(phba);
/* Clear sli active flag to prevent sysfs access to HBA */
spin_lock_irq(&phba->hbalock);
phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
/* Stop and flush all I/Os and bring HBA offline */
lpfc_offline(phba);
/*
* There may be errored I/Os through HBA, abort all I/Os on txcmplq
* and let the SCSI mid-layer to retry them to recover.
*/
pring = &psli->ring[psli->fcp_ring];
lpfc_sli_abort_iocb_ring(phba, pring);
}
/**
......@@ -7792,21 +7794,20 @@ lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
static void
lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2710 PCI channel disable preparing for reset\n");
/* Block all SCSI devices' I/Os on the host */
lpfc_scsi_dev_block(phba);
/* stop all timers */
lpfc_stop_hba_timers(phba);
/* Disable interrupt and pci device */
lpfc_sli_disable_intr(phba);
pci_disable_device(phba->pcidev);
/*
* There may be I/Os dropped by the firmware.
* Error iocb (I/O) on txcmplq and let the SCSI layer
* retry it after re-establishing link.
*/
pring = &psli->ring[psli->fcp_ring];
lpfc_sli_abort_iocb_ring(phba, pring);
/* Flush all driver's outstanding SCSI I/Os as we are to reset */
lpfc_sli_flush_fcp_rings(phba);
}
/**
......@@ -7822,6 +7823,12 @@ lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba)
{
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2711 PCI channel permanent disable for failure\n");
/* Block all SCSI devices' I/Os on the host */
lpfc_scsi_dev_block(phba);
/* stop all timers */
lpfc_stop_hba_timers(phba);
/* Clean up all driver's outstanding SCSI I/Os */
lpfc_sli_flush_fcp_rings(phba);
}
......@@ -7850,9 +7857,6 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
/* Block all SCSI devices' I/Os on the host */
lpfc_scsi_dev_block(phba);
switch (state) {
case pci_channel_io_normal:
/* Non-fatal error, prepare for recovery */
......@@ -7959,7 +7963,7 @@ lpfc_io_resume_s3(struct pci_dev *pdev)
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
/* Bring the device online */
/* Bring device online, it will be no-op for non-fatal error resume */
lpfc_online(phba);
/* Clean up Advanced Error Reporting (AER) if needed */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册