- 24 3月, 2017 7 次提交
-
-
由 Neil Armstrong 提交于
Prepend the compatible strings with a GX generic name in nodes compatible with the GXBB HW and keep the same scheme as other nodes. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Neil Armstrong 提交于
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Neil Armstrong 提交于
Since we know the GXBB and GXL/GXM share more hardware, we can safely move the remaining peripheral nodes present in the GXBB dtsi to the common GX dtsi. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
The Khadas VIM series consists of two boards which are almost identical: They are both using the same GXL S905X SoC, 100Mbit/s ethernet (through the SoC-internal PHY), 2GB DDR3 memory, a micro-SD card slot, onboard eMMC, Broadcom based SDIO WIFI, 2x USB A and 1x USB Type-C (the latter with OTG support). The red LED is driven by PWM_AO_B (which allows dimming), while the blue LED is managed by the firmware. The differences are: - the VIM Pro has a 16GB eMMC module, while the VIM only has 8GB - the VIM Pro uses an AP6255 a/b/g/n/ac WIFI module, while the VIM comes with an AP6212 b/g/n SDIO WIFI module (the Vim uses an 8GB eMMC module, while The boards are based on Amlogic's GXL S905X P212 reference design, which is why most of the functionality (all MMC controllers and power sequences, IR remote input, the main UART, ADC and ethernet) is simply inherited from meson-gxl-s905x-p212.dtsi. Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
Khadas is a new sub-brand of "Shenzhen Wesion Technology Co., Ltd.". They are developing Amlogic and Rockchip based "DIY boxes" (single board computers): http://khadas.com/ They are best know for their latest product: the Khadas VIM (an Amlogic GXL S905X based SBC). Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
This adds the new DT nodes for the missing PWM pins in the EE and AO domain. Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
- 23 3月, 2017 3 次提交
-
-
由 Neil Armstrong 提交于
The wrong GPIO line was provided here. Fixes: ef8d2ffe ("ARM64: dts: meson-gxbb: add MMC support") Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Neil Armstrong 提交于
This patch describes the GPIO lines usage on the Odroid-C2 board. This is useful in the debugfs gpio file and using the cdev gpio API. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Neil Armstrong 提交于
This patch adds support for the P230 and Q200 ADC laddered button and GPIO button. Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
- 15 3月, 2017 1 次提交
-
-
由 Martin Blumenstingl 提交于
The Amlogic P212 reference design is used by other devices as well, such as (for example) the Khadas VIM boards. Thus this patch adds and moves all common entries from meson-gxl-s905x-p212.dts to a new, separate meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the Khadas VIM). Support for all boards based on the P212 reference design includes: - enabling IR support - enabling the SAR ADC (SARADC_CH1 is connected to a resistor which indicates the hardware revision, a similar design is found on the Khadas VIM boards) - all MMC controllers (which means that SDIO wifi, the SD card and the eMMC are now supported) - pwm_ef as dependency for the SDIO wifi modules - uart_A which is connected to the bluetooth module (the bluetooth module itself is not enabled yet due to missing devicetree bindings for the Broadcom serial bluetooth devices) - uart_AO is moved to the .dtsi (as all known devices use it as their boot-console) Specific to the P212 board: - this also enables the CVBS connector (which is not available on the Khadas VIM boards for example) - Realtek based SDIO wifi (instead of Broadcom which most other devices use) Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: NNeil Armstrong <narmstrong@baylibre.com> Tested-by: NKevin Hilman <khilman@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
- 11 3月, 2017 2 次提交
-
-
由 Carlo Caione 提交于
This patch adds support for the HwaCom AmazeTV set-top-box. The hardware configuration is really similar to the other GXL boards but for this hardware we need to limit the max-frequency of the eMMC to have it working. Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NCarlo Caione <carlo@endlessm.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Carlo Caione 提交于
Signed-off-by: NCarlo Caione <carlo@endlessm.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
- 07 3月, 2017 10 次提交
-
-
由 Carlo Caione 提交于
Hwacom Systems Inc. is a broadband system integrator and supplier of mobile, fixed and IP networks related services as well as multimedia application. Website: http://www.hwacom.com/Signed-off-by: NCarlo Caione <carlo@endlessm.com> Acked-by: NRob Herring <robh@kernel.org> [khilman: change shortlog prefix to dt-bindings] Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
The ethmac node has to be configured for each board due to different pinctrl nodes for RGMII/RMII. Thus the phy-mode should be specified at the same place (= in the board .dts), making it easier to read the board .dts file (because the phy-mode is stated explicitly, without requiring developers to read all "parent" .dtsi as well). Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
This adds the amlogic,tx-delay-ns property with the old (hardcoded) default value of 2ns to all boards which are using an RGMII ethernet PHY. Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
Amlogic's own .dts specifies that the P201 board uses a RMII PHY (with the reset GPIO being GPIOZ_14). However our P201 board .dts simply inherits the phy-mode setting from from meson-gx.dtsi where it defaults to RGMII mode. Remove all ethernet settings from meson-gxbb-p20x.dtsi as it only specifies the RGMII pins which are only valid for the P200 board. Instead we add the ethmac node to the meson-gxbb-p201.dts and configure the pinctrl property and the phy-mode for an RMII PHY. An MDIO node (which would also specify the PHY) is not added since we don't know which PHY is being used (and thus which PHY address would have to be used). Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also specify the phy-handle of the ethmac node to make the PHY configuration similar to the one we have on GXL devices. This will allow us to specify OF-properties for the PHY itself. Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also specify the phy-handle of the ethmac node to make the PHY configuration similar to the one we have on GXL devices. This will allow us to specify OF-properties for the PHY itself. Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also specify the phy-handle of the ethmac node to make the PHY configuration similar to the one we have on GXL devices. This will allow us to specify OF-properties for the PHY itself. Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also specify the phy-handle of the ethmac node to make the PHY configuration similar to the one we have on GXL devices. This will allow us to specify OF-properties for the PHY itself. Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also specify the phy-handle of the ethmac node to make the PHY configuration similar to the one we have on GXL devices. This will allow us to specify OF-properties for the PHY itself. Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
由 Martin Blumenstingl 提交于
This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also explicitly specify the phy-mode instead of relying on the default-value from meson-gx.dtsi. Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NJerome Brunet <jbrunet@baylibre.com> Signed-off-by: NKevin Hilman <khilman@baylibre.com>
-
- 06 3月, 2017 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 05 3月, 2017 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix double-free in batman-adv, from Sven Eckelmann. 2) Fix packet stats for fast-RX path, from Joannes Berg. 3) Netfilter's ip_route_me_harder() doesn't handle request sockets properly, fix from Florian Westphal. 4) Fix sendmsg deadlock in rxrpc, from David Howells. 5) Add missing RCU locking to transport hashtable scan, from Xin Long. 6) Fix potential packet loss in mlxsw driver, from Ido Schimmel. 7) Fix race in NAPI handling between poll handlers and busy polling, from Eric Dumazet. 8) TX path in vxlan and geneve need proper RCU locking, from Jakub Kicinski. 9) SYN processing in DCCP and TCP need to disable BH, from Eric Dumazet. 10) Properly handle net_enable_timestamp() being invoked from IRQ context, also from Eric Dumazet. 11) Fix crash on device-tree systems in xgene driver, from Alban Bedel. 12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de Melo. 13) Fix use-after-free in netvsc driver, from Dexuan Cui. 14) Fix max MTU setting in bonding driver, from WANG Cong. 15) xen-netback hash table can be allocated from softirq context, so use GFP_ATOMIC. From Anoob Soman. 16) Fix MAC address change bug in bgmac driver, from Hari Vyas. 17) strparser needs to destroy strp_wq on module exit, from WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits) strparser: destroy workqueue on module exit sfc: fix IPID endianness in TSOv2 sfc: avoid max() in array size rds: remove unnecessary returned value check rxrpc: Fix potential NULL-pointer exception nfp: correct DMA direction in XDP DMA sync nfp: don't tell FW about the reserved buffer space net: ethernet: bgmac: mac address change bug net: ethernet: bgmac: init sequence bug xen-netback: don't vfree() queues under spinlock xen-netback: keep a local pointer for vif in backend_disconnect() netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups netfilter: nf_conntrack_sip: fix wrong memory initialisation can: flexcan: fix typo in comment can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer can: gs_usb: fix coding style can: gs_usb: Don't use stack memory for USB transfers ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines ixgbe: update the rss key on h/w, when ethtool ask for it ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull more KVM updates from Radim Krčmář: "Second batch of KVM changes for the 4.11 merge window: PPC: - correct assumption about ASDR on POWER9 - fix MMIO emulation on POWER9 x86: - add a simple test for ioperm - cleanup TSS (going through KVM tree as the whole undertaking was caused by VMX's use of TSS) - fix nVMX interrupt delivery - fix some performance counters in the guest ... and two cleanup patches" * tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: Fix pending events injection x86/kvm/vmx: remove unused variable in segment_base() selftests/x86: Add a basic selftest for ioperm x86/asm: Tidy up TSS limit code kvm: convert kvm.users_count from atomic_t to refcount_t KVM: x86: never specify a sample period for virtualized in_tx_cp counters KVM: PPC: Book3S HV: Don't use ASDR for real-mode HPT faults on POWER9 KVM: PPC: Book3S HV: Fix software walk of guest process page tables
-
git://git.lwn.net/linux由 Linus Torvalds 提交于
Pull documentation fixes from Jonathan Corbet: "A few fixes for the docs tree, including one for a 4.11 build regression" * tag 'docs-4.11-fixes' of git://git.lwn.net/linux: Documentation/sphinx: fix primary_domain configuration docs: Fix htmldocs build failure doc/ko_KR/memory-barriers: Update control-dependencies section pcieaer doc: update the link Documentation: Update path to sysrq.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging/IIO driver fixes from Greg KH: "Here are a few small staging and IIO driver fixes for issues that showed up after the big set if changes you merged last week. Nothing major, just small bugs resolved in some IIO drivers, a lustre allocation fix, and some RaspberryPi driver fixes for reported problems, as well as a MAINTAINERS entry update. All of these have been in linux-next for a week with no reported issues" * tag 'staging-4.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: fsl-mc: fix warning in DT ranges parser MAINTAINERS: Remove Noralf Trønnes as fbtft maintainer staging: vchiq_2835_arm: Make cache-line-size a required DT property staging: bcm2835/mmal-vchiq: unlock on error in buffer_from_host() staging/lustre/lnet: Fix allocation size for sv_cpt_data iio: adc: xilinx: Fix error handling iio: 104-quad-8: Fix off-by-one error when addressing flag register iio: adc: handle unknow of_device_id data
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: - vmalloc stack regression in CCM - Build problem in CRC32 on ARM - Memory leak in cavium - Missing Kconfig dependencies in atmel and mediatek - XTS Regression on some platforms (s390 and ppc) - Memory overrun in CCM test vector * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: vmx - Use skcipher for xts fallback crypto: vmx - Use skcipher for cbc fallback crypto: testmgr - Pad aes_ccm_enc_tv_template vector crypto: arm/crc32 - add build time test for CRC instruction support crypto: arm/crc32 - fix build error with outdated binutils crypto: ccm - move cbcmac input off the stack crypto: xts - Propagate NEED_FALLBACK bit crypto: api - Add crypto_requires_off helper crypto: atmel - CRYPTO_DEV_MEDIATEK should depend on HAS_DMA crypto: atmel - CRYPTO_DEV_ATMEL_TDES and CRYPTO_DEV_ATMEL_SHA should depend on HAS_DMA crypto: cavium - fix leak on curr if curr->head fails to be allocated crypto: cavium - Fix couple of static checker errors
-
- 04 3月, 2017 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull misc final vfs updates from Al Viro: "A few unrelated patches that got beating in -next. Everything else will have to go into the next window ;-/" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: hfs: fix hfs_readdir() selftest for default_file_splice_read() infoleak 9p: constify ->d_name handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull more SCSI updates from James Bottomley: "This is the set of stuff that didn't quite make the initial pull and a set of fixes for stuff which did. The new stuff is basically lpfc (nvme), qedi and aacraid. The fixes cover a lot of previously submitted stuff, the most important of which probably covers some of the failing irq vectors allocation and other fallout from having the SCSI command allocated as part of the block allocation functions" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (59 commits) scsi: qedi: Fix memory leak in tmf response processing. scsi: aacraid: remove redundant zero check on ret scsi: lpfc: use proper format string for dma_addr_t scsi: lpfc: use div_u64 for 64-bit division scsi: mac_scsi: Fix MAC_SCSI=m option when SCSI=m scsi: cciss: correct check map error. scsi: qla2xxx: fix spelling mistake: "seperator" -> "separator" scsi: aacraid: Fixed expander hotplug for SMART family scsi: mpt3sas: switch to pci_alloc_irq_vectors scsi: qedf: fixup compilation warning about atomic_t usage scsi: remove scsi_execute_req_flags scsi: merge __scsi_execute into scsi_execute scsi: simplify scsi_execute_req_flags scsi: make the sense header argument to scsi_test_unit_ready mandatory scsi: sd: improve TUR handling in sd_check_events scsi: always zero sshdr in scsi_normalize_sense scsi: scsi_dh_emc: return success in clariion_std_inquiry() scsi: fix memory leak of sdpk on when gd fails to allocate scsi: sd: make sd_devt_release() static scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework. ...
-
由 WANG Cong 提交于
Fixes: 43a0c675 ("strparser: Stream parser for messages") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Missing check for full sock in ip_route_me_harder(), from Florian Westphal. 2) Incorrect sip helper structure initilization that breaks it when several ports are used, from Christophe Leroy. 3) Fix incorrect assumption when looking up for matching with adjacent intervals in the nft_set_rbtree. 4) Fix broken netlink event error reporting in nf_tables that results in misleading ESRCH errors propagated to userspace listeners. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: "A fix and regression test case for nvdimm namespace label compatibility. Details: - An "nvdimm namespace label" is metadata on an nvdimm that provisions dimm capacity into a "namespace" that can host a block device / dax-filesytem, or a device-dax character device. A namespace is an object that other operating environment and platform firmware needs to comprehend for capabilities like booting from an nvdimm. The label metadata contains a checksum that Linux was not calculating correctly leading to other environments rejecting the Linux label. These have received a build success notification from the kbuild robot, and a positive test result from Nick who reported the problem" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit, libnvdimm: fix interleave set cookie calculation tools/testing/nvdimm: make iset cookie predictable
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: - fix NULL pointer dereferences in many DesignWare-based drivers due to refactoring error - fix Altera config write breakage due to my refactoring error * tag 'pci-v4.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: altera: Fix TLP_CFG_DW0 for TLP write PCI: dwc: Fix crashes seen due to missing assignments
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes and cleanups from Helge Deller: "Nothing really important in this patchset: fix resource leaks in error paths, coding style cleanups and code removal" * 'parisc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Remove flush_user_dcache_range and flush_user_icache_range parisc: fix a printk parisc: ccio-dma: Handle return NULL error from ioremap_nocache parisc: Define access_ok() as macro parisc: eisa: Fix resource leaks in error paths parisc: eisa: Remove coding style errors
-
git://github.com/jcmvbkbc/linux-xtensa由 Linus Torvalds 提交于
Pull Xtensa updates from Max Filippov: - clean up bootable image build targets: provide separate 'Image', 'zImage' and 'uImage' make targets that only build corresponding image type. Make 'all' build all images appropriate for a platform - allow merging vectors code into .text section as a preparation step for XIP support - fix handling external FDT when the kernel is built without BLK_DEV_INITRD support * tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: allow merging vectors into .text section xtensa: clean up bootable image build targets xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. This includes two branches for arm64 dt updates, both following up on earlier changes for the same platforms that are already merged: Samsung: - add USB3 support in Exynos7 - minor PM related updates Amlogic: - new machines: WeTek Set-top-boxes - various devices added to DT There are also a couple of bugfixes that trickled in since the start of the merge window: - The moxart_defconfig was not building the intended platform - CPU-hotplug was broken on ux500 - Coresight was broken on Juno (never worked)" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: deconfig: fix the moxart defconfig ARM: ux500: resume the second core properly arm64: dts: juno: update definition for programmable replicator arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost arm64: dts: exynos: Add USB 3.0 controller node for Exynos7 arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7 pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e ARM64: dts: meson-gxbb-p200: add ADC laddered keys ARM64: dts: meson: meson-gx: add the SAR ADC ARM64: dts: meson-gxl: add the pwm_ao_b pin ARM64: dts: meson-gx: add the missing pwm_AO_ab node clk: gxbb: fix CLKID_ETH defined twice ARM64: dts: meson-gxl: rename Nexbox A95x for consistency clk: gxbb: add the SAR ADC clocks and expose them dt-bindings: amlogic: Add WeTek boards ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play dt-bindings: vendor-prefix: Add wetek vendor prefix ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes ...
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull SMB3 fixes from Steve French: "Some small bug fixes as well as SMB2.1/SMB3 enablement for DFS (global namespace) which previously was only enabled for CIFS" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: smb2: Enforce sec= mount option CIFS: Fix sparse warnings CIFS: implement get_dfs_refer for SMB2+ CIFS: use DFS pathnames in SMB2+ Create requests CIFS: set signing flag in SMB2+ TreeConnect if needed CIFS: let ses->ipc_tid hold smb2 TreeIds CIFS: add use_ipc flag to SMB2_ioctl() CIFS: add build_path_from_dentry_optional_prefix() CIFS: move DFS response parsing out of SMB1 code CIFS: Fix possible use after free in demultiplex thread
-
由 John Keeping 提交于
With Sphinx 1.5.3 I get the warning: WARNING: primary_domain 'C' not found, ignored. It seems that domain names in Sphinx are case-sensitive and for the C domain the name must be lower case. Signed-off-by: NJohn Keeping <john@metanate.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-