Whenever a single nouveau_mc_intr() main gpu irq-handler invocation was
responsible for calling both, the vblank-irq handler (display engine irq)
and kms-pageflip completion handler (from fifo irq), the order of
invocation was wrong. nouveau_finish_flip() was called before
drm_handle_vblank() for the vblank of pageflip completion, so the
emitted pageflip event contained stale vblank count and timestamp
from previous vblank. This caused failure in userspace to timestamp
properly.

Reorder order of invocation of engine irq handlers: Put
NVDEV_ENGINE_DISP always on top, and thereby before NVDEV_ENGINE_FIFO,
so that drm_handle_vblank() gets called to update vblank timestamps
and count before potential pageflip events make use of that
information.

This works on nv-50 and later, where kms-pageflip completion triggers
an irq either after a separate vblank irq, or both pageflip and vblank
trigger one common irq invocation, but never before vblank irqs.

v2 (Ben):
- removed mods for nv04-nv40, it doesn't help there anyway
- this is considered a hack, and a better solution should be found
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: <stable@vger.kernel.org> # 3.13+

nv04_disp_scanoutpos() must abort to trigger simple timestamping
fallback if vtotal/htotal regs return zero. This happens if the
output isn't a digital output, but a vga analog output, as the
regs don't get initialized in that case.

Fixes timestamping failure on nv-40 and earlier with vga output.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: <stable@vger.kernel.org> # 3.14+

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Leave debug for the more interesting bits of info.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Use with caution.
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Some adt7473 can't manage the 20µs delay we use for the bitbanging, bumping
it to 40µs seem to do the trick.
Signed-off-by: NMartin Peres <martin.peres@free.fr>
Tested-by: NMarcel Dopita <mdop@seznam.cz>

I spent some time this weekend trying to find in the vbios the number of
pulses per revolutions in the vbios but couldn't find it. It would seem
all my cards have 2 pulses per revolution so let's stick to that until
further notice.

Thermal table's id 0x48 may indicate this information but it would seem
that changing the value results in the blob power or clock gating the
RPM counter... We should ask NVIDIA about that, should be trivial-enough
for them to answer.
Signed-off-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Only tested on nvf1, was advised to enable on all.
Signed-off-by: NJohn Rowley <john.rowley08@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NJohn Rowley <john.rowley08@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Set the correct subdev/engine classes when GK20A (0xea) is probed.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Add a GR device for GK20A based on NVE4, with the correct classes
definitions (GK20A's 3D class is 0xa297).

Most of the NVE4 code can be used on GK20A, so make relevant bits of
NVE4 available to other chips as well.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Pad the microcode to a multiple of 0x40 words, otherwise firmware will
fail to run from non-prepadded firmware files.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nvc0_graph_ctor() would only let the graphics engine be enabled if its
oclass has a proper microcode linked to it. This prevents GR from being
enabled at all on chips that rely exclusively on external firmware, even
though such a use-case is valid.

Relax the conditions enabling the GR engine to also include the case
where an external firmware has also been loaded.

Also switch to external firmware if the graph class has no microcode
linked to it.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GK20A's FIFO is compatible with NVE0, but only features 128 channels and
1 runlist.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Add a simple FB device for GK20A, as well as a RAM implementation
suitable for chips that use system memory as video RAM.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Add support for initializing the priv ring of GK20A. This is done by the
BIOS on desktop GPUs, but needs to be done by hand on Tegra.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Adapt the NVC0 BAR driver to make it able to support chips that do not
expose a BAR3. When this happens, BAR1 is then used for USERD mapping
and the BAR alloc() functions is disabled, making GPU objects unable
to rely on BAR for data access and falling back to PRAMIN.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Some chips that use system memory exclusively (e.g. GK20A) do not
expose 2 BAR regions. For them only BAR1 exists, and it should be used
for USERD mapping. Do not map BAR3 if its resource does not exist.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

drm/panel: Changes for v3.16-rc1

This set of commits contains a couple of fixes to existing panel drivers
and support for some new panels.

One commit touches the DRM core in that in modifies the MIPI DSI support
to hook up the shutdown function so that drivers can provide code that's
run on shutdown. This is used by a subsequent commit to make the simple
panel driver power off the backlight on shutdown.

* tag 'drm/panel/for-3.16-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: simple - Add AUO B133XTN01 panel support
  drm/panel: simple - Disable panel on shutdown
  drm/panel: add support for EDT ET057090DHU panel
  drm/panel: Add support for EDT ETM0700G0DH6 and ET070080DH6 panels
  drm/panel: ld9040: add power control sequence
  drm/panel: s6e8aa0: silence array overflow warning
  drm/dsi: Support device shutdown

drm/tegra: Changes for v3.16-rc1

The majority of these changes are a slew of cleanups across the board.
A more noteworthy change is the addition of drm_dev_set_unique() and the
conversion of the Tegra DRM driver to use it. This allows us to get rid
of the host1x drm_bus implementation. Other USB and platform drivers can
be changed in a similar way. Unfortunately for most PCI devices there is
some userspace that relies on the old functionality and cannot be as
easily converted.

HDMI and hardware cursor support is added for Tegra124. The SOR output
gains support for exposing CRCs via debugfs, which can be used for
automated testing. Many values that were hardcoded in the SOR/eDP code
are now computed at runtime to increase compatibility with more devices.

* tag 'drm/tegra/for-3.16-rc1' of git://anongit.freedesktop.org/tegra/linux: (47 commits)
  drm/tegra: sor - Remove obsolete comment
  drm/tegra: sor - Enable only the necessary number of lanes
  drm/tegra: sor - Power on only the necessary lanes
  drm/tegra: sor - Do not program interlaced mode registers
  drm/tegra: sor - Do not hardcode link speed
  drm/tegra: sor - Do not hardcode number of blank symbols
  drm/tegra: sor - Don't hardcode link parameters
  drm/tegra: sor - Change power down ordering
  drm/tegra: sor - Fix copy/paste error
  drm/tegra: sor - Remove pixel clock rounding
  drm/tegra: sor - Make debugfs setup consistent
  drm/tegra: sor - Recursively remove debugfs tree
  drm/tegra: dp - Mark the connector as hotplug capable
  drm/tegra: dp - Implement hotplug detection in work queue
  drm/tegra: Add hardware cursor support
  drm/tegra: Remove host1x drm_bus implementation
  drm: Document how to register devices without struct drm_bus
  drm: Add device registration documentation
  drm: Introduce drm_dev_set_unique()
  gpu: host1x: Rename internal functions for clarity
  ...

This panel is used by nyan-big and can be supported by the simple-panel
driver.
Signed-off-by: NStéphane Marchesin <marcheu@chromium.org>
[treding@nvidia.com: add device tree binding document]
Signed-off-by: NThierry Reding <treding@nvidia.com>

According to the DP specification the disparity of the first symbol
should always be negative. It is therefore safe to assume that panels
will conform to that and therefore parameterizing this field should
never be necessary.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Instead of always enabling all four lanes, enable only the number probed
from the link.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Power on only those lanes required for the specified link.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Interlaced mode is currently not supported on the SOR, so don't program
any associated registers.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Use the speed probed from the link at runtime rather than relying on a
hardcoded default.
Signed-off-by: NThierry Reding <treding@nvidia.com>

The number of HBLANK and VBLANK symbols can be computed at runtime so
that they can be set appropriately depending on the video mode and DP
link.

These values are used by the packet generation logic to determine how
many audio samples can be transferred during the blanking intervals.
Signed-off-by: NThierry Reding <treding@nvidia.com>

The currently hardcoded link parameters don't work on all eDP panels, so
compute the parameters at runtime depending on the mode and panel type
to allow the driver to cope with a wider variety of panels.

Note that the number of bits per pixel of the panel is still hardcoded,
but this can be addressed in a separate patch.

This is largely based on a patch by Stéphane Marchesin but the algorithm
was largely rewritten to be more readable and concise.
Signed-off-by: NStéphane Marchesin <marcheu@chromium.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Lanes are powered up in decreasing order. Power them down in increasing
order for consistency.
Signed-off-by: NStéphane Marchesin <marcheu@chromium.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The comment above mentions link A/B but this isn't what the code does,
so let's fix that.
Signed-off-by: NStéphane Marchesin <marcheu@chromium.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The code currently rounds up the clock to the next MHZ, which is
rounding up a 69.5MHz clock to 70MHz on my machine. This in turn
prevents the display from syncing. Removing this rounding fixes eDP
for me.
Signed-off-by: NStéphane Marchesin <marcheu@chromium.org>
Signed-off-by: NThierry Reding <treding@nvidia.com>

> Bunch of stuff for 3.16 still:
> - Mipi dsi panel support for byt. Finally! From Shobhit&others. I've
>   squeezed this in since it's a regression compared to vbios and we've
>   been ridiculed about it a bit too often ...
> - connection_mutex deadlock fix in get_connector (only affects i915).
> - Core patches from Matt's primary plane from Matt Roper, I've pushed the
>   i915 stuff to 3.17.
> - vlv power well sequencing fixes from Jesse.
> - Fix for cursor size changes from Chris.
> - agpbusy fixes from Ville.
> - A few smaller things.
>

* tag 'drm-intel-fixes-2014-06-06' of git://anongit.freedesktop.org/drm-intel: (32 commits)
  drm/i915: BDW: Adding missing cursor offsets.
  drm: Fix getconnector connection_mutex locking
  drm/i915/bdw: Only use 2g GGTT for 32b platforms
  drm/i915: Nuke pipe A quirk on i830M
  drm/i915: fix display power sw state reporting
  drm/i915: Always apply cursor width changes
  drm/i915: tell the user if both KMS and UMS are disabled
  drm/plane-helper: Add drm_plane_helper_check_update() (v3)
  drm: Check CRTC compatibility in setplane
  drm/i915: use VBT to determine whether to enumerate the VGA port
  drm/i915: Don't WARN about ring idle bit on gen2
  drm/i915: Silence the WARN if the user tries to GTT mmap an incoherent object
  drm/i915: Move the C3 LP write bit setup to gen3_init_clock_gating() for KMS
  drm/i915: Enable interrupt-based AGPBUSY# enable on 85x
  drm/i915: Flip the sense of AGPBUSY_DIS bit
  drm/i915: Set AGPBUSY# bit in init_clock_gating
  drm/i915/vlv: add pll assertion when disabling DPIO common well
  drm/i915/vlv: move DPIO common reset de-assert into __vlv_set_power_well
  drm/i915/vlv: re-order power wells so DPIO common comes after TX
  drm/i915/vlv: move CRI refclk enable into __vlv_set_power_well
  ...

Other output drivers set up debugfs slightly differently. Bring the SOR
driver in line with those for consistency.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Removing only the root directory will fail when there are still files in
it. Instead of manually removing all files, remove the whole directory
recursively.
Signed-off-by: NThierry Reding <treding@nvidia.com>