- 31 1月, 2012 2 次提交
-
-
由 Wey-Yi Guy 提交于
Led has no use for some platform. Add additional module parameter option to disable LED Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Fix multiple bugs in event tracing: 1) If you enable uCode tracing with the device down, it will still attempt to access the device and continuously log "MAC is in deep sleep!" errors. Fix this by only starting logging when the device is actually alive. 2) Now you can set the flag when the device is down, but logging doesn't happen when you bring it up. To fix that, start logging when the device comes alive. This means we don't log before -- we could do that but I don't need it right now. 3) For some reason we read the error instead of the event log -- use the right pointer. 4) Optimise SRAM reading of event log header. 5) Fix reading write pointer == capacity, which can happen due to racy SRAM access 6) Most importantly: fix an error where we would try to read WAY too many events (like 2^32-300) when we read the wrap counter before it is updated by the uCode -- this does happen in practice and will cause the driver to hang the machine. 7) Finally, change the timer to 10ms instead of 100ms as 100ms is too slow to capture all data with a normal event log and with 100ms the log will wrap multiple times before we have a chance to read it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 25 1月, 2012 1 次提交
-
-
由 Wey-Yi Guy 提交于
Update Copyright to 2012 Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 12月, 2011 2 次提交
-
-
由 Venkataraman, Meenakshi 提交于
Runtime DC calibration was previously conditional. Remove this behaviour, as new devices support runtime DC calibration, while older devices ignore the runtime DC calibration request. This patch addresses low TX throughput issues seen with the 6205. Signed-off-by: NMeenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Johannes Berg 提交于
At least while debugging, a lot of people use 11n_disable=1 to disable HT completely. To be able to figure out what parts of HT cause the problems we see, make the parameter a bitmap, allowing to disable all of HT and aggregation (TX/RX) separately. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 16 12月, 2011 3 次提交
-
-
由 Don Fry 提交于
Remove all but the last few references to iwl_priv from the lower level iwl-ucode.c, with resulting code changes. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Don Fry 提交于
The mac80211 setup_register operations are collected in one routine, but the cleanup routines are not. Create a routine for this. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Don Fry 提交于
Move the configuration pointer from the upper level iwl_priv to the lower level iwl_shared structure, with associated code fixes. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 15 12月, 2011 1 次提交
-
-
由 Johannes Berg 提交于
Ted reported that he couldn't connect to some APs and bisected it to the tx_sync implementation. Disable it for the BSS context to fix this issue. Reported-by: NTed Ts'o <tytso@mit.edu> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 12月, 2011 5 次提交
-
-
由 Don Fry 提交于
Move the calib_results list from the upper layer iwl_priv structure to the lower layer iwl_trans structure. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Don Fry 提交于
Move the low level ucode device_pointers structure to iwl_shared. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Don Fry 提交于
The eeprom image is a device level component, move from iwl_priv to iwl_shared, with associated code changes. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
P2P still under development. it will not enabled by default, but user always can enable it manually for testing. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
Change the name to match the works Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 07 12月, 2011 1 次提交
-
-
由 Don Fry 提交于
Replace the references to the iwl_priv structure with the iwl_trans structure as the priv structure is never referenced other than to access the trans structure. Rename from iwlagn to iwl. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 12月, 2011 4 次提交
-
-
由 Wey-Yi Guy 提交于
The current default watchdog timer is enabled, but we are seeing issues on legacy devices. So change the default setting of watchdog timer to per device based. But user still can use the "wd_disable" module parameter to overwrite the system setting Cc: stable@vger.kernel.org #3.0+ Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
The ht40 setting should not change after association unless channel switch This fix a problem we are seeing which cause uCode assert because driver sending invalid information and make uCode confuse Here is the firmware assert message: kernel: iwlagn 0000:03:00.0: Microcode SW error detected. Restarting 0x82000000. kernel: iwlagn 0000:03:00.0: Loaded firmware version: 17.168.5.3 build 42301 kernel: iwlagn 0000:03:00.0: Start IWL Error Log Dump: kernel: iwlagn 0000:03:00.0: Status: 0x000512E4, count: 6 kernel: iwlagn 0000:03:00.0: 0x00002078 | ADVANCED_SYSASSERT kernel: iwlagn 0000:03:00.0: 0x00009514 | uPc kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink1 kernel: iwlagn 0000:03:00.0: 0x00009496 | branchlink2 kernel: iwlagn 0000:03:00.0: 0x0000D1F2 | interruptlink1 kernel: iwlagn 0000:03:00.0: 0x00000000 | interruptlink2 kernel: iwlagn 0000:03:00.0: 0x01008035 | data1 kernel: iwlagn 0000:03:00.0: 0x0000C90F | data2 kernel: iwlagn 0000:03:00.0: 0x000005A7 | line kernel: iwlagn 0000:03:00.0: 0x5080B520 | beacon time kernel: iwlagn 0000:03:00.0: 0xCC515AE0 | tsf low kernel: iwlagn 0000:03:00.0: 0x00000003 | tsf hi kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp1 kernel: iwlagn 0000:03:00.0: 0x29703BF0 | time gp2 kernel: iwlagn 0000:03:00.0: 0x00000000 | time gp3 kernel: iwlagn 0000:03:00.0: 0x000111A8 | uCode version kernel: iwlagn 0000:03:00.0: 0x000000B0 | hw version kernel: iwlagn 0000:03:00.0: 0x00480303 | board version kernel: iwlagn 0000:03:00.0: 0x09E8004E | hcmd kernel: iwlagn 0000:03:00.0: CSR values: kernel: iwlagn 0000:03:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG) kernel: iwlagn 0000:03:00.0: CSR_HW_IF_CONFIG_REG: 0X00480303 kernel: iwlagn 0000:03:00.0: CSR_INT_COALESCING: 0X0000ff40 kernel: iwlagn 0000:03:00.0: CSR_INT: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_INT_MASK: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_FH_INT_STATUS: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GPIO_IN: 0X00000030 kernel: iwlagn 0000:03:00.0: CSR_RESET: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_GP_CNTRL: 0X080403c5 kernel: iwlagn 0000:03:00.0: CSR_HW_REV: 0X000000b0 kernel: iwlagn 0000:03:00.0: CSR_EEPROM_REG: 0X07d60ffd kernel: iwlagn 0000:03:00.0: CSR_EEPROM_GP: 0X90000001 kernel: iwlagn 0000:03:00.0: CSR_OTP_GP_REG: 0X00030001 kernel: iwlagn 0000:03:00.0: CSR_GIO_REG: 0X00080044 kernel: iwlagn 0000:03:00.0: CSR_GP_UCODE_REG: 0X000093bb kernel: iwlagn 0000:03:00.0: CSR_GP_DRIVER_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP1: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_UCODE_DRV_GP2: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_LED_REG: 0X00000078 kernel: iwlagn 0000:03:00.0: CSR_DRAM_INT_TBL_REG: 0X88214dd2 kernel: iwlagn 0000:03:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200 kernel: iwlagn 0000:03:00.0: CSR_ANA_PLL_CFG: 0X00000000 kernel: iwlagn 0000:03:00.0: CSR_HW_REV_WA_REG: 0X0001001a kernel: iwlagn 0000:03:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010 kernel: iwlagn 0000:03:00.0: FH register values: kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X21316d00 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X021479c0 kernel: iwlagn 0000:03:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000060 kernel: iwlagn 0000:03:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000 kernel: iwlagn 0000:03:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001 kernel: iwlagn 0000:03:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000 kernel: iwlagn 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries kernel: ------------[ cut here ]------------ WARNING: at net/mac80211/util.c:1208 ieee80211_reconfig+0x1f1/0x407() kernel: Hardware name: 4290W4H kernel: Pid: 1896, comm: kworker/0:0 Not tainted 3.1.0 #2 kernel: Call Trace: kernel: [<ffffffff81036558>] ? warn_slowpath_common+0x73/0x87 kernel: [<ffffffff813b8966>] ? ieee80211_reconfig+0x1f1/0x407 kernel: [<ffffffff8139e8dc>] ? ieee80211_recalc_smps_work+0x32/0x32 kernel: [<ffffffff8139e95a>] ? ieee80211_restart_work+0x7e/0x87 kernel: [<ffffffff810472fa>] ? process_one_work+0x1c8/0x2e3 kernel: [<ffffffff810480c9>] ? worker_thread+0x17a/0x23a kernel: [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b kernel: [<ffffffff81047f4f>] ? manage_workers.clone.18+0x15b/0x15b kernel: [<ffffffff8104ba97>] ? kthread+0x7a/0x82 kernel: [<ffffffff813d21b4>] ? kernel_thread_helper+0x4/0x10 kernel: [<ffffffff8104ba1d>] ? kthread_flush_work_fn+0x11/0x11 kernel: [<ffffffff813d21b0>] ? gs_change+0xb/0xb Cc: <stable@kernel.org> 3.1+ Reported-by: NUdo Steinberg <udo@hypervisor.org> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Group keys in IBSS or AP mode are not programmed into the device since we give the key to it with every TX packet. However, we do need mac80211 to create the MMIC & PN in all cases. Move the code around to set the key flags all the time. We set them even when the key is removed again but that is obviously harmless. Cc: stable@vger.kernel.org Reported-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Don Fry 提交于
Replace the references to the iwl_priv structure with the iwl_trans structure as the priv structure is never referenced other than to access the trans structure. Rename from iwlagn to iwl. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 29 11月, 2011 2 次提交
-
-
由 Wey-Yi Guy 提交于
Not sure it is the best way to do it, but many times we want to know what the configuration options were enabled for the compiled driver. Let's just log the options during load time; so there were be no confusion. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This makes handling the calibration data more generic and no longer requires updating IWL_CALIB_MAX when a new uCode comes with more calibration packets. Since we just copy the data back, there's also no need for understanding which calibration we received -- we can just reflect it back to the runtime uCode. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 26 11月, 2011 2 次提交
-
-
由 Wey-Yi Guy 提交于
Not sure it is the best way to do it, but many times we want to know what the configuration options were enabled for the compiled driver. Let's just log the options during load time; so there were be no confusion. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Johannes Berg 提交于
This makes handling the calibration data more generic and no longer requires updating IWL_CALIB_MAX when a new uCode comes with more calibration packets. Since we just copy the data back, there's also no need for understanding which calibration we received -- we can just reflect it back to the runtime uCode. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 12 11月, 2011 4 次提交
-
-
由 Wey-Yi Guy 提交于
There are many mac80211 callback functions in the driver, as current implementation, those functions are scatter everywhere which is very difficult to find and maintain, move all the mac80211 callback functions into single file. There should be no functional changes Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Don Fry 提交于
Relocate the ucode files and update relevant code. More code refactoring. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Don Fry 提交于
The upper layers of the driver do not need to know where the ucode is stored. It already passes in an enum of which ucode to load. Let the lower layer routines select the ucode to load. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Whether to use NoA or not is entire controlled by the uCode right now, and it also adds the attribute to beacons. We do need to add it to probe responses in the driver though. Keep track of the NoA notification from the uCode and add the data to probe responses when such are transmitted. Use RCU to manage the lifetime. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 11月, 2011 2 次提交
-
-
由 Don Fry 提交于
The iwl_alloc_all routine is only called once. Delete the argument and print an error in the calling routine if needed. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The WoWLAN API changed due to netdetect and we now have a more generic "D3 configuration" command that enables the sysassert & rfkill wakeup triggers. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 15 10月, 2011 7 次提交
-
-
由 Emmanuel Grumbach 提交于
Move iwl_enable_rfkill_int to iwl-core.h, and remove the empty iwl-helpers.h Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
After driver split, no need to separate station management functions in two files, merge it Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Use the same calling style for all the mac80211 callback functions Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Add IWL_DEBUG_MAC80211 debug for all mac80211 callback function Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Once enable rts/cts for aggregation queue, do not disable until the last aggregation queue closed. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Don Fry 提交于
A pointer to the bus structure is still in iwl_priv. Finish cleanup and remove it. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Updating the beacon every time right after one was transmitted is pointless, most of the time we might not even have to update it. We will update it every time it changes, which includes from set_tim(), a callback iwlwifi didn't implement so far. This also reduces latency for clients, previously we would update the beacon right after the previous one was transmitted, and then a TIM change would only take effect after that again -- updating the beacon right after the TIM changes makes the TIM change go out to the air faster. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 12 10月, 2011 1 次提交
-
-
由 Wey-Yi Guy 提交于
My previous patch for init calib cfg disable a set of calibration for both init and runtime which cause performance issue, Fix it Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 04 10月, 2011 1 次提交
-
-
由 Don Fry 提交于
Rename the iwlagn module as iwlwifi in preparation for future changes. Add an alias to iwlagn for backward compatibility. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 22 9月, 2011 2 次提交
-
-
由 Johannes Berg 提交于
If we're associated and want to do P2P at the same time, the scan for remain-on-channel is currently limited to 80ms because of the way the device will behave in that case. Instead of doing that, split up the dwell times into little pieces. It will not actually be a single big dwell time then, but will be close enough. This improves robustness of P2P in such scenarios. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Since the driver split there's no more need for shared/non-shared private station data so remove struct iwl_station_priv_common entirely. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-