- 31 1月, 2012 4 次提交
-
-
由 Wey-Yi Guy 提交于
Led has no use for some platform. Add additional module parameter option to disable LED Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Fix multiple bugs in event tracing: 1) If you enable uCode tracing with the device down, it will still attempt to access the device and continuously log "MAC is in deep sleep!" errors. Fix this by only starting logging when the device is actually alive. 2) Now you can set the flag when the device is down, but logging doesn't happen when you bring it up. To fix that, start logging when the device comes alive. This means we don't log before -- we could do that but I don't need it right now. 3) For some reason we read the error instead of the event log -- use the right pointer. 4) Optimise SRAM reading of event log header. 5) Fix reading write pointer == capacity, which can happen due to racy SRAM access 6) Most importantly: fix an error where we would try to read WAY too many events (like 2^32-300) when we read the wrap counter before it is updated by the uCode -- this does happen in practice and will cause the driver to hang the machine. 7) Finally, change the timer to 10ms instead of 100ms as 100ms is too slow to capture all data with a normal event log and with 100ms the log will wrap multiple times before we have a chance to read it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Fix few places of typo Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Although the rtlwifi family of devices contains 11 copies of the pr_fmt macro, the macro is not defined for all routines that need it. By moving the macro to wifi.h, a single copy is available for all routines. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 1月, 2012 1 次提交
-
-
由 John W. Linville 提交于
The device seems to survive the issue, so no need to flood the logs about it... Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 1月, 2012 10 次提交
-
-
由 Yogesh Ashok Powar 提交于
While configuring the broadcast key in the hardware, in multi-BSS environment, BSSes other than first were incorrectly configured with the MAC address of first BSS. Fixing it with correct MAC addresses. Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
This enables user to check beacon interval, DTIM period, short slot time and short preamble information using "iw dev mlan0 link" command when station is in connected state. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Avinash Patil 提交于
Pass mwifiex_private pointer directly to wmm_add_buf_txqueue() instead of passing adapter and then deriving priv again in mwifiex_get_priv_by_id(). This reduces a 'for' loop in TX path. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
This seems to be only needed as workaround for hardware problem on PCI devices. Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Zero all other bits than RESET_CSR and RESET_BBP when want to do the reset, that the vendor driver behaviour. Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
We can receive frames just after firmware load with current code, so disable DMA just after firmware is loaded, not before. Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Ralink USB driver initialize H2M_INT_SRC to 0 after firmware load, and never touch this register later. It is not touched at all by Ralink PCI driver. Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch implements a simple way of reducing the output power of the device by a configurable upper limit. Requested-by: NHarshal Chhaya <harshal@gmail.com> Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Similar to the previous beacon filtering patch, make CQM RSSI support depend on the flags that the driver set for virtual interfaces. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Acked-by: NLuciano Coelho <coelho@ti.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Due to firmware limitations, we may not be able to support beacon filtering on all virtual interfaces. To allow this in mac80211, introduce per-interface driver capability flags that the driver sets when an interface is added. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Acked-by: NLuciano Coelho <coelho@ti.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 25 1月, 2012 25 次提交
-
-
由 John W. Linville 提交于
Avoids this: CC [M] drivers/net/wireless/orinoco/orinoco_usb.o drivers/net/wireless/orinoco/orinoco_usb.c:1759:13: warning: ‘version’ defined but not used Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Avoids this: CC [M] drivers/net/wireless/ath/ath5k/base.o drivers/net/wireless/ath/ath5k/base.c: In function ‘__check_no_hw_rfkill_switch’: drivers/net/wireless/ath/ath5k/base.c:85:1: warning: return from incompatible pointer type Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Antonio Quartulli 提交于
Skip group keys configuration in hardware in order to make IBSS RSN work. Keys will be managed using software. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ilan Elias 提交于
Free sk_buff if nfcwilink_send fails. Signed-off-by: NIlan Elias <ilane@ti.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ilan Elias 提交于
Download TI NFC init script during nfcwilink open operation, after the NFC channel is registered with TI shared transport. TI NFC init script is written in BTS format. First, read the chip version via a special vendor specific command. Second, we request the relevant BTS file from the user space, and then send the BTS commands to the chip. Signed-off-by: NIlan Elias <ilane@ti.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ilan Elias 提交于
Add endian annotations to TI nfcwilink driver. Signed-off-by: NIlan Elias <ilane@ti.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Convert printks to pr_<level> Prefix logging with pr_fmt. Use ##__VA_ARGS__ in some WL_ logging macros. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Convert a couple of pr_debug/print_hex_dump to the standard utility. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Use pr_debug to allow dynamic debugging to work. Move an #endif to allow brcmf_dbg_hex_dump to be outside the #if/#endif block. Move a const char* declaration to be inside a pr_debug so the function doesn't need a #if/#endif block. Don't use temporaries in debugging functions so the code can be optimized away. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
This doesn't do anything anymore. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Reduce the number of #ifdef DEBUG uses by adding a dbg_hex_dump routine which has the appropriate #ifdef DEBUG test. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Allow dynamic debugging. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
Current CONFIG_BRCMDBG flag when enabled does not necessarily enable proper pr_debug output when DEBUG is not also enabled. Remove BCMDBG define and just use DEBUG instead. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Antonio Quartulli 提交于
Disable group keys programming when using IBSS RSN. Keys will be managed using software. In this way IBSS RSN can correctly work. Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
In the early days, this was a quite useful software feature for testing different regdomains and chain configurations without adding debugfs cruft into the driver. Nowadays, the driver's phy code seems to be stable and there's no need for it anymore. Therefore I decided to removed altogether. Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yogesh Ashok Powar 提交于
Currently mwifiex_private pointers are derived from wiphy structures. This will always work as long as there is only one net_device associated with one wiphy. In scenarios where there are multiple net_devices associated with single wiphy, one should use net_device to derive the priv. Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yogesh Ashok Powar 提交于
Current implementation, for retrieving priv from adapter, uses bss_index. In multi interface environment supporting different types, bss_index may not be unique. Use bss_type along with bss_num to retrieve the priv. bss_index is removed with this change. Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
The SPROM location has been relocated again for some devices. This patch will log the offset when CONFIG_BCMA_DEBUG has been selected. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Nicolas Cavallari 提交于
On carl9170, HW encryption is disabled on IBSS; the mac80211 software-based encryption is used instead. As mac80211 supports IBSS RSN (per-STA GTK), claim its support in the carl9170 PHY. Signed-off-by: NNicolas Cavallari <cavallar@lri.fr> Acked-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
The function is called with locks held and thus should not use GFP_KERNEL. The semantic patch that makes this report is available in scripts/coccinelle/locks/call_kern.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/Signed-off-by: NJulia Lawall <julia.lawall@lip6.fr> Acked-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-