- 24 1月, 2008 1 次提交
-
-
由 Li Yang 提交于
Remove device_type = "usb" for 83xx SoC USB controller Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 12 12月, 2007 3 次提交
-
-
由 Kumar Gala 提交于
Added aliases nodes for kurobox, 83xx, 85xx, and 86xx platforms. This included added labels and cell-index properties for serial and pci nodes. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
* Removed address fields in ethernet nodes * Removed #address-cells, #size-cells from gianfar nodes * Added cell-index to gianfar and ucc ethernet nodes * Added enet[0..3] labels * Renamed compatible node for gianfar mdio to "fsl,gianfar-mdio" * Removed device_type = "mdio" The matching for gianfar mdio still supports the old "mdio"/"gianfar" combo but it is now considered deprecated. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
* Removed device_type = "i2c" * Added missing second I2C controller on MPC8548 CDS, MPC8544 DS * Added #address-cells, #size-cells, and cell-index where missing Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 21 11月, 2007 1 次提交
-
-
由 Kim Phillips 提交于
Now the rtc class ds1374 driver has been added, remove the old rtc driver hookup code, add rtc node to device trees, and turn on the new driver in the defconfigs. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 08 10月, 2007 1 次提交
-
-
由 Peter Korsgaard 提交于
According to booting-without-of.txt, compatible should be "fsl_spi" and mode "cpu" or "qe" for the fsl SPI controllers. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 22 9月, 2007 1 次提交
-
-
由 Grant Likely 提交于
cuImage needs to know the logical index of the ethernet devices in order to assign mac addresses. This adds the needed properties. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> CC: Scott Wood <scottwood@freescale.com> CC: Kumar Gala <galak@kernel.crashing.org> CC: Timur Tabi <timur@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 14 9月, 2007 2 次提交
-
-
由 Kumar Gala 提交于
Updated the device trees to have the PCI nodes be at the same level as the SOC node. This is to make it so that the SOC nodes children address space is just on chip registers and not other bus memory as well. Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge that exists in the PHB. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Removed the following cruft from .dts files: * 32-bit in cpu node -- doesn't exist in any spec and not used by kernel * removed built-in (chrp legacy) * Removed #interrupt-cells in places they don't need to be set * Fixed ranges on lite5200* * Removed clock-frequency from i8259 pic node, not sure where this came from * Removed big-endian from i8259 pic nodes, this was just bogus Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 23 7月, 2007 1 次提交
-
-
由 Roy Zang 提交于
Updated the 83xx & 85xx device tree PCI related compartible property. Used the following compatible properties: PCI "fsl,mpc8349-pci" PCI "fsl,mpc8540-pci" PCI-X: "fsl,mpc8540-pcix" PCIe: "fsl,mpc8548-pcie" Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 03 7月, 2007 1 次提交
-
-
由 Timur Tabi 提交于
For the 83xx, 85xx, and 86xx device trees, add a "local-mac-address" property to every Ethernet node that didn't have one. Add a comment indicating that the "address" and/or "mac-address" properties are deprecated in DTS files and will be removed at a later time. Change all MAC address properties to have a zero MAC address value. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 10 5月, 2007 1 次提交
-
-
由 Scott Wood 提交于
The MPC834x_MDS device tree's PCI non-prefetchable MMIO range was specified incorrectly. Both the local and bus addresses start at 0x90000000. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 09 3月, 2007 1 次提交
-
-
由 Stuart Yoder 提交于
The #cpus property is unused and undocumented and is therefore being removed. Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 17 2月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
* Fixed up top level compatible property for all boards * Removed explicit linux,phandle usage. Use references and labels now * Fixed interrupt sense attribute, some interrupts were marked edge, that are level Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 10 2月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
The MPC834x SYS board has always been called the MPC834x MDS since its public release. Removed all references to SYS and replaced with MDS. Additionally renamed the .dts to match the defconfig (mpc834x_mds*). Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 08 2月, 2007 1 次提交
-
-
由 Li Yang 提交于
Added a new dr_mode property to describe what mode the DR controller is being used in (host, device, OTG). Updated the MPC8349E MDS dts with this new property. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 14 9月, 2006 1 次提交
-
-
由 Kim Phillips 提交于
Fix MPC8349EMDS dts PCI interrupt-map values for IDSEL 0x18 per Tanya's catch. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NTanya Jiang <tanya.jiang@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 30 8月, 2006 1 次提交
-
-
由 Kim Phillips 提交于
Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-