提交 1b3c5cda 编写于 作者: K Kumar Gala

[POWERPC] Move PCI nodes to be sibilings with SOC nodes

Updated the device trees to have the PCI nodes be at the same level as
the SOC node.  This is to make it so that the SOC nodes children address
space is just on chip registers and not other bus memory as well.

Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge
that exists in the PHB.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 f0c8ac80
......@@ -182,27 +182,6 @@
interrupt-parent = <&mpc5200_pic>;
};
pci@0d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "mpc5200-pci";
reg = <d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
c000 0 0 2 &mpc5200_pic 0 0 3
c000 0 0 3 &mpc5200_pic 0 0 3
c000 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 a 0>;
interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 b0000000 0 01000000>;
};
spi@f00 {
device_type = "spi";
compatible = "mpc5200-spi";
......@@ -337,4 +316,25 @@
reg = <8000 4000>;
};
};
pci@f0000d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "mpc5200-pci";
reg = <f0000d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
c000 0 0 2 &mpc5200_pic 0 0 3
c000 0 0 3 &mpc5200_pic 0 0 3
c000 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 a 0>;
interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 b0000000 0 01000000>;
};
};
......@@ -182,32 +182,6 @@
interrupt-parent = <&mpc5200_pic>;
};
pci@0d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "mpc5200b-pci\0mpc5200-pci";
reg = <d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
c000 0 0 2 &mpc5200_pic 1 1 3
c000 0 0 3 &mpc5200_pic 1 2 3
c000 0 0 4 &mpc5200_pic 1 3 3
c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
c800 0 0 2 &mpc5200_pic 1 2 3
c800 0 0 3 &mpc5200_pic 1 3 3
c800 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 a 0>;
interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 b0000000 0 01000000>;
};
spi@f00 {
device_type = "spi";
compatible = "mpc5200b-spi\0mpc5200-spi";
......@@ -342,4 +316,30 @@
reg = <8000 4000>;
};
};
pci@f0000d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "mpc5200b-pci\0mpc5200-pci";
reg = <f0000d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
c000 0 0 2 &mpc5200_pic 1 1 3
c000 0 0 3 &mpc5200_pic 1 2 3
c000 0 0 4 &mpc5200_pic 1 3 3
c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
c800 0 0 2 &mpc5200_pic 1 2 3
c800 0 0 3 &mpc5200_pic 1 3 3
c800 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 a 0>;
interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 b0000000 0 01000000>;
};
};
......@@ -150,36 +150,6 @@
interrupt-parent = < &ipic >;
};
pci@8500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0E -mini PCI */
7000 0 0 1 &ipic 12 8
7000 0 0 2 &ipic 12 8
7000 0 0 3 &ipic 12 8
7000 0 0 4 &ipic 12 8
/* IDSEL 0x0F - PCI slot */
7800 0 0 1 &ipic 11 8
7800 0 0 2 &ipic 12 8
7800 0 0 3 &ipic 11 8
7800 0 0 4 &ipic 12 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
crypto@30000 {
device_type = "crypto";
model = "SEC2";
......@@ -208,4 +178,34 @@
device_type = "ipic";
};
};
pci@e0008500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0E -mini PCI */
7000 0 0 1 &ipic 12 8
7000 0 0 2 &ipic 12 8
7000 0 0 3 &ipic 12 8
7000 0 0 4 &ipic 12 8
/* IDSEL 0x0F - PCI slot */
7800 0 0 1 &ipic 11 8
7800 0 0 2 &ipic 12 8
7800 0 0 3 &ipic 11 8
7800 0 0 4 &ipic 12 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};
......@@ -97,65 +97,6 @@
descriptor-types-mask = <0122003f>;
};
pci@8500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 AD18 */
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 AD19 */
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 AD21*/
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 AD22*/
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 AD23*/
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 AD24*/
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 d0000000 0 00100000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
......@@ -335,4 +276,63 @@
interrupt-parent = < &ipic >;
};
};
pci@e0008500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 AD18 */
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 AD19 */
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 AD21*/
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 AD22*/
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 AD23*/
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 AD24*/
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 d0000000 0 00100000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};
......@@ -92,39 +92,6 @@
descriptor-types-mask = <0122003f>;
};
pci@8500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 AD16 (USB) */
8000 0 0 1 &pic 11 8
/* IDSEL 0x11 AD17 (Mini1)*/
8800 0 0 1 &pic 12 8
8800 0 0 2 &pic 13 8
8800 0 0 3 &pic 14 8
8800 0 0 4 &pic 30 8
/* IDSEL 0x12 AD18 (PCI/Mini2) */
9000 0 0 1 &pic 13 8
9000 0 0 2 &pic 14 8
9000 0 0 3 &pic 30 8
9000 0 0 4 &pic 11 8>;
interrupt-parent = <&pic>;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 10000000
02000000 0 90000000 90000000 0 10000000
01000000 0 d0000000 d0000000 0 04000000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
pic:pic@700 {
interrupt-controller;
#address-cells = <0>;
......@@ -294,4 +261,37 @@
interrupt-parent = <&pic>;
};
};
pci@e0008500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 AD16 (USB) */
8000 0 0 1 &pic 11 8
/* IDSEL 0x11 AD17 (Mini1)*/
8800 0 0 1 &pic 12 8
8800 0 0 2 &pic 13 8
8800 0 0 3 &pic 14 8
8800 0 0 4 &pic 30 8
/* IDSEL 0x12 AD18 (PCI/Mini2) */
9000 0 0 1 &pic 13 8
9000 0 0 2 &pic 14 8
9000 0 0 3 &pic 30 8
9000 0 0 4 &pic 11 8>;
interrupt-parent = <&pic>;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 10000000
02000000 0 90000000 90000000 0 10000000
01000000 0 d0000000 d0000000 0 04000000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};
......@@ -178,52 +178,6 @@
interrupt-parent = < &ipic >;
};
pci@8500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 - SATA */
8000 0 0 1 &ipic 16 8 /* SATA_INTA */
>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 10000000
02000000 0 90000000 90000000 0 10000000
01000000 0 00000000 e2000000 0 01000000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
pci@8600 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0E - MiniPCI Slot */
7000 0 0 1 &ipic 15 8 /* PCI_INTA */
/* IDSEL 0x0F - PCI Slot */
7800 0 0 1 &ipic 14 8 /* PCI_INTA */
7800 0 0 2 &ipic 15 8 /* PCI_INTB */
>;
interrupt-parent = < &ipic >;
interrupts = <43 8>;
bus-range = <1 1>;
ranges = <42000000 0 a0000000 a0000000 0 10000000
02000000 0 b0000000 b0000000 0 10000000
01000000 0 00000000 e3000000 0 01000000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8600 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
crypto@30000 {
device_type = "crypto";
model = "SEC2";
......@@ -245,4 +199,53 @@
device_type = "ipic";
};
};
pci@e0008500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 - SATA */
8000 0 0 1 &ipic 16 8 /* SATA_INTA */
>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 10000000
02000000 0 90000000 90000000 0 10000000
01000000 0 00000000 e2000000 0 01000000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
pci@e0008600 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0E - MiniPCI Slot */
7000 0 0 1 &ipic 15 8 /* PCI_INTA */
/* IDSEL 0x0F - PCI Slot */
7800 0 0 1 &ipic 14 8 /* PCI_INTA */
7800 0 0 2 &ipic 15 8 /* PCI_INTB */
>;
interrupt-parent = < &ipic >;
interrupts = <43 8>;
bus-range = <0 0>;
ranges = <42000000 0 a0000000 a0000000 0 10000000
02000000 0 b0000000 b0000000 0 10000000
01000000 0 00000000 e3000000 0 01000000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008600 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};
......@@ -134,28 +134,6 @@
interrupt-parent = < &ipic >;
};
pci@8600 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0F - PCI Slot */
7800 0 0 1 &ipic 14 8 /* PCI_INTA */
7800 0 0 2 &ipic 15 8 /* PCI_INTB */
>;
interrupt-parent = < &ipic >;
interrupts = <43 8>;
bus-range = <1 1>;
ranges = <42000000 0 a0000000 a0000000 0 10000000
02000000 0 b0000000 b0000000 0 10000000
01000000 0 00000000 e3000000 0 01000000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8600 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
crypto@30000 {
device_type = "crypto";
model = "SEC2";
......@@ -177,4 +155,26 @@
device_type = "ipic";
};
};
pci@e0008600 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0F - PCI Slot */
7800 0 0 1 &ipic 14 8 /* PCI_INTA */
7800 0 0 2 &ipic 15 8 /* PCI_INTB */
>;
interrupt-parent = < &ipic >;
interrupts = <43 8>;
bus-range = <1 1>;
ranges = <42000000 0 a0000000 a0000000 0 10000000
02000000 0 b0000000 b0000000 0 10000000
01000000 0 00000000 e3000000 0 01000000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008600 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};
......@@ -183,126 +183,6 @@
interrupt-parent = < &ipic >;
};
pci@8500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 */
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 */
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 */
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 */
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 */
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 */
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
pci@8600 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 */
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 */
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 */
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 */
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 */
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 */
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 b0000000 b0000000 0 10000000
42000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 e2100000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8600 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
/* May need to remove if on a part without crypto engine */
crypto@30000 {
device_type = "crypto";
......@@ -333,4 +213,124 @@
device_type = "ipic";
};
};
pci@e0008500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 */
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 */
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 */
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 */
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 */
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 */
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
pci@e0008600 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 */
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 */
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 */
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 */
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 */
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 */
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 b0000000 b0000000 0 10000000
42000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 e2100000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008600 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};
......@@ -111,66 +111,6 @@
descriptor-types-mask = <01010ebf>;
};
pci@8500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 AD18 */
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 AD19 */
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 AD21*/
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 AD22*/
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 AD23*/
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 AD24*/
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
......@@ -365,6 +305,65 @@
interrupts = <20 8 21 8>; //high:32 low:33
interrupt-parent = < &ipic >;
};
};
pci@e0008500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
8800 0 0 1 &ipic 14 8
8800 0 0 2 &ipic 15 8
8800 0 0 3 &ipic 16 8
8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 AD18 */
9000 0 0 1 &ipic 16 8
9000 0 0 2 &ipic 17 8
9000 0 0 3 &ipic 14 8
9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 AD19 */
9800 0 0 1 &ipic 17 8
9800 0 0 2 &ipic 14 8
9800 0 0 3 &ipic 15 8
9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 AD21*/
a800 0 0 1 &ipic 14 8
a800 0 0 2 &ipic 15 8
a800 0 0 3 &ipic 16 8
a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 AD22*/
b000 0 0 1 &ipic 17 8
b000 0 0 2 &ipic 14 8
b000 0 0 3 &ipic 15 8
b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 AD23*/
b800 0 0 1 &ipic 16 8
b800 0 0 2 &ipic 17 8
b800 0 0 3 &ipic 14 8
b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 AD24*/
c000 0 0 1 &ipic 15 8
c000 0 0 2 &ipic 16 8
c000 0 0 3 &ipic 17 8
c000 0 0 4 &ipic 14 8>;
interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
42000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};
......@@ -171,104 +171,104 @@
interrupts = <2a 2>;
interrupt-parent = <&mpic>;
};
pci@8000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
};
/* IDSEL 0x02 */
1000 0 0 1 &mpic 1 1
1000 0 0 2 &mpic 2 1
1000 0 0 3 &mpic 3 1
1000 0 0 4 &mpic 4 1
pci@e0008000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x03 */
1800 0 0 1 &mpic 4 1
1800 0 0 2 &mpic 1 1
1800 0 0 3 &mpic 2 1
1800 0 0 4 &mpic 3 1
/* IDSEL 0x02 */
1000 0 0 1 &mpic 1 1
1000 0 0 2 &mpic 2 1
1000 0 0 3 &mpic 3 1
1000 0 0 4 &mpic 4 1
/* IDSEL 0x04 */
2000 0 0 1 &mpic 3 1
2000 0 0 2 &mpic 4 1
2000 0 0 3 &mpic 1 1
2000 0 0 4 &mpic 2 1
/* IDSEL 0x03 */
1800 0 0 1 &mpic 4 1
1800 0 0 2 &mpic 1 1
1800 0 0 3 &mpic 2 1
1800 0 0 4 &mpic 3 1
/* IDSEL 0x05 */
2800 0 0 1 &mpic 2 1
2800 0 0 2 &mpic 3 1
2800 0 0 3 &mpic 4 1
2800 0 0 4 &mpic 1 1
/* IDSEL 0x04 */
2000 0 0 1 &mpic 3 1
2000 0 0 2 &mpic 4 1
2000 0 0 3 &mpic 1 1
2000 0 0 4 &mpic 2 1
/* IDSEL 0x0c */
6000 0 0 1 &mpic 1 1
6000 0 0 2 &mpic 2 1
6000 0 0 3 &mpic 3 1
6000 0 0 4 &mpic 4 1
/* IDSEL 0x05 */
2800 0 0 1 &mpic 2 1
2800 0 0 2 &mpic 3 1
2800 0 0 3 &mpic 4 1
2800 0 0 4 &mpic 1 1
/* IDSEL 0x0d */
6800 0 0 1 &mpic 4 1
6800 0 0 2 &mpic 1 1
6800 0 0 3 &mpic 2 1
6800 0 0 4 &mpic 3 1
/* IDSEL 0x0c */
6000 0 0 1 &mpic 1 1
6000 0 0 2 &mpic 2 1
6000 0 0 3 &mpic 3 1
6000 0 0 4 &mpic 4 1
/* IDSEL 0x0e */
7000 0 0 1 &mpic 3 1
7000 0 0 2 &mpic 4 1
7000 0 0 3 &mpic 1 1
7000 0 0 4 &mpic 2 1
/* IDSEL 0x0d */
6800 0 0 1 &mpic 4 1
6800 0 0 2 &mpic 1 1
6800 0 0 3 &mpic 2 1
6800 0 0 4 &mpic 3 1
/* IDSEL 0x0f */
7800 0 0 1 &mpic 2 1
7800 0 0 2 &mpic 3 1
7800 0 0 3 &mpic 4 1
7800 0 0 4 &mpic 1 1
/* IDSEL 0x0e */
7000 0 0 1 &mpic 3 1
7000 0 0 2 &mpic 4 1
7000 0 0 3 &mpic 1 1
7000 0 0 4 &mpic 2 1
/* IDSEL 0x12 */
9000 0 0 1 &mpic 1 1
9000 0 0 2 &mpic 2 1
9000 0 0 3 &mpic 3 1
9000 0 0 4 &mpic 4 1
/* IDSEL 0x0f */
7800 0 0 1 &mpic 2 1
7800 0 0 2 &mpic 3 1
7800 0 0 3 &mpic 4 1
7800 0 0 4 &mpic 1 1
/* IDSEL 0x13 */
9800 0 0 1 &mpic 4 1
9800 0 0 2 &mpic 1 1
9800 0 0 3 &mpic 2 1
9800 0 0 4 &mpic 3 1
/* IDSEL 0x12 */
9000 0 0 1 &mpic 1 1
9000 0 0 2 &mpic 2 1
9000 0 0 3 &mpic 3 1
9000 0 0 4 &mpic 4 1
/* IDSEL 0x14 */
a000 0 0 1 &mpic 3 1
a000 0 0 2 &mpic 4 1
a000 0 0 3 &mpic 1 1
a000 0 0 4 &mpic 2 1
/* IDSEL 0x13 */
9800 0 0 1 &mpic 4 1
9800 0 0 2 &mpic 1 1
9800 0 0 3 &mpic 2 1
9800 0 0 4 &mpic 3 1
/* IDSEL 0x15 */
a800 0 0 1 &mpic 2 1
a800 0 0 2 &mpic 3 1
a800 0 0 3 &mpic 4 1
a800 0 0 4 &mpic 1 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8000 1000>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
};
/* IDSEL 0x14 */
a000 0 0 1 &mpic 3 1
a000 0 0 2 &mpic 4 1
a000 0 0 3 &mpic 1 1
a000 0 0 4 &mpic 2 1
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
/* IDSEL 0x15 */
a800 0 0 1 &mpic 2 1
a800 0 0 2 &mpic 3 1
a800 0 0 3 &mpic 4 1
a800 0 0 4 &mpic 1 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008000 1000>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
};
};
......@@ -43,7 +43,7 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00100000>; // CCSRBAR 1M
reg = <e0000000 00001000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
......@@ -135,100 +135,6 @@
interrupt-parent = <&mpic>;
};
pci1: pci@8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
08000 0 0 1 &mpic 0 1
08000 0 0 2 &mpic 1 1
08000 0 0 3 &mpic 2 1
08000 0 0 4 &mpic 3 1
/* IDSEL 0x11 */
08800 0 0 1 &mpic 0 1
08800 0 0 2 &mpic 1 1
08800 0 0 3 &mpic 2 1
08800 0 0 4 &mpic 3 1
/* IDSEL 0x12 (Slot 1) */
09000 0 0 1 &mpic 0 1
09000 0 0 2 &mpic 1 1
09000 0 0 3 &mpic 2 1
09000 0 0 4 &mpic 3 1
/* IDSEL 0x13 (Slot 2) */
09800 0 0 1 &mpic 1 1
09800 0 0 2 &mpic 2 1
09800 0 0 3 &mpic 3 1
09800 0 0 4 &mpic 0 1
/* IDSEL 0x14 (Slot 3) */
0a000 0 0 1 &mpic 2 1
0a000 0 0 2 &mpic 3 1
0a000 0 0 3 &mpic 0 1
0a000 0 0 4 &mpic 1 1
/* IDSEL 0x15 (Slot 4) */
0a800 0 0 1 &mpic 3 1
0a800 0 0 2 &mpic 0 1
0a800 0 0 3 &mpic 1 1
0a800 0 0 4 &mpic 2 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
19000 0 0 1 &mpic 0 1
19000 0 0 2 &mpic 1 1
19000 0 0 3 &mpic 2 1
19000 0 0 4 &mpic 3 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
i8259@19000 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <19000 0 0 0 1>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <1>;
interrupt-parent = <&pci1>;
};
};
pci@9000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 &mpic b 1
a800 0 0 2 &mpic b 1
a800 0 0 3 &mpic b 1
a800 0 0 4 &mpic b 1>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
01000000 0 00000000 e3000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <9000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
......@@ -240,4 +146,98 @@
big-endian;
};
};
pci1: pci@e0008000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
08000 0 0 1 &mpic 0 1
08000 0 0 2 &mpic 1 1
08000 0 0 3 &mpic 2 1
08000 0 0 4 &mpic 3 1
/* IDSEL 0x11 */
08800 0 0 1 &mpic 0 1
08800 0 0 2 &mpic 1 1
08800 0 0 3 &mpic 2 1
08800 0 0 4 &mpic 3 1
/* IDSEL 0x12 (Slot 1) */
09000 0 0 1 &mpic 0 1
09000 0 0 2 &mpic 1 1
09000 0 0 3 &mpic 2 1
09000 0 0 4 &mpic 3 1
/* IDSEL 0x13 (Slot 2) */
09800 0 0 1 &mpic 1 1
09800 0 0 2 &mpic 2 1
09800 0 0 3 &mpic 3 1
09800 0 0 4 &mpic 0 1
/* IDSEL 0x14 (Slot 3) */
0a000 0 0 1 &mpic 2 1
0a000 0 0 2 &mpic 3 1
0a000 0 0 3 &mpic 0 1
0a000 0 0 4 &mpic 1 1
/* IDSEL 0x15 (Slot 4) */
0a800 0 0 1 &mpic 3 1
0a800 0 0 2 &mpic 0 1
0a800 0 0 3 &mpic 1 1
0a800 0 0 4 &mpic 2 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
19000 0 0 1 &mpic 0 1
19000 0 0 2 &mpic 1 1
19000 0 0 3 &mpic 2 1
19000 0 0 4 &mpic 3 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
i8259@19000 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <19000 0 0 0 1>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <1>;
interrupt-parent = <&pci1>;
};
};
pci@e0009000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 &mpic b 1
a800 0 0 2 &mpic b 1
a800 0 0 3 &mpic b 1
a800 0 0 4 &mpic b 1>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
01000000 0 00000000 e3000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0009000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
};
......@@ -43,16 +43,7 @@
#size-cells = <1>;
device_type = "soc";
ranges = <00001000 e0001000 000ff000
80000000 80000000 20000000
a0000000 a0000000 10000000
b0000000 b0000000 00100000
c0000000 c0000000 20000000
b0100000 b0100000 00100000
e1000000 e1000000 00010000
e1010000 e1010000 00010000
e1020000 e1020000 00010000>;
ranges = <00000000 e0000000 00100000>;
reg = <e0000000 00001000>; // CCSRBAR 1M
bus-frequency = <0>; // Filled out by uboot.
......@@ -147,115 +138,173 @@
interrupt-parent = <&mpic>;
};
pci@8000 {
compatible = "fsl,mpc8540-pci";
device_type = "pci";
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
8800 0 0 1 &mpic 2 1
8800 0 0 2 &mpic 3 1
8800 0 0 3 &mpic 4 1
8800 0 0 4 &mpic 1 1
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8548-guts";
reg = <e0000 1000>;
fsl,has-rstcr;
};
/* IDSEL 0x12 J16 Slot 2 */
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
};
9000 0 0 1 &mpic 3 1
9000 0 0 2 &mpic 4 1
9000 0 0 3 &mpic 2 1
9000 0 0 4 &mpic 1 1>;
pci@e0008000 {
compatible = "fsl,mpc8540-pci";
device_type = "pci";
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
8800 0 0 1 &mpic 2 1
8800 0 0 2 &mpic 3 1
8800 0 0 3 &mpic 4 1
8800 0 0 4 &mpic 1 1
/* IDSEL 0x12 J16 Slot 2 */
9000 0 0 1 &mpic 3 1
9000 0 0 2 &mpic 4 1
9000 0 0 3 &mpic 2 1
9000 0 0 4 &mpic 1 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 ff>;
ranges = <02000000 0 c0000000 c0000000 0 20000000
01000000 0 00000000 e1000000 0 00010000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008000 1000>;
};
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 ff>;
ranges = <02000000 0 c0000000 c0000000 0 20000000
01000000 0 00000000 e1000000 0 00010000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
pcie@e0009000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0009000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e1010000 0 00010000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <1a 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 4 1
0000 0 0 2 &mpic 5 1
0000 0 0 3 &mpic 6 1
0000 0 0 4 &mpic 7 1
>;
pcie@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8000 1000>;
};
pcie@9000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <9000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e1010000 0 00010000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <1a 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 4 1
0000 0 0 2 &mpic 5 1
0000 0 0 3 &mpic 6 1
0000 0 0 4 &mpic 7 1
>;
ranges = <02000000 0 80000000
02000000 0 80000000
0 20000000
01000000 0 00000000
01000000 0 00000000
0 00010000>;
};
};
pcie@a000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
pcie@e000a000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e000a000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 e1020000 0 00010000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 0 1
0000 0 0 2 &mpic 1 1
0000 0 0 3 &mpic 2 1
0000 0 0 4 &mpic 3 1
>;
pcie@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
reg = <a000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 e1020000 0 00010000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 0 1
0000 0 0 2 &mpic 1 1
0000 0 0 3 &mpic 2 1
0000 0 0 4 &mpic 3 1
>;
device_type = "pci";
ranges = <02000000 0 a0000000
02000000 0 a0000000
0 10000000
01000000 0 00000000
01000000 0 00000000
0 00010000>;
};
};
pcie@b000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
pcie@e000b000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e000b000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 b0000000 b0000000 0 00100000
01000000 0 00000000 b0100000 0 00100000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <1b 2>;
interrupt-map-mask = <fb00 0 0 0>;
interrupt-map = <
// IDSEL 0x1c USB
e000 0 0 0 &i8259 c 2
e100 0 0 0 &i8259 9 2
e200 0 0 0 &i8259 a 2
e300 0 0 0 &i8259 b 2
// IDSEL 0x1d Audio
e800 0 0 0 &i8259 6 2
// IDSEL 0x1e Legacy
f000 0 0 0 &i8259 7 2
f100 0 0 0 &i8259 7 2
// IDSEL 0x1f IDE/SATA
f800 0 0 0 &i8259 e 2
f900 0 0 0 &i8259 5 2
>;
pcie@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
reg = <b000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 b0000000 b0000000 0 00100000
01000000 0 00000000 b0100000 0 00100000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <1b 2>;
interrupt-map-mask = <fb00 0 0 0>;
interrupt-map = <
// IDSEL 0x1c USB
e000 0 0 0 &i8259 c 2
e100 0 0 0 &i8259 9 2
e200 0 0 0 &i8259 a 2
e300 0 0 0 &i8259 b 2
// IDSEL 0x1d Audio
e800 0 0 0 &i8259 6 2
// IDSEL 0x1e Legacy
f000 0 0 0 &i8259 7 2
f100 0 0 0 &i8259 7 2
// IDSEL 0x1f IDE/SATA
f800 0 0 0 &i8259 e 2
f900 0 0 0 &i8259 5 2
>;
device_type = "pci";
ranges = <02000000 0 b0000000
02000000 0 b0000000
0 00100000
01000000 0 00000000
01000000 0 00000000
0 00100000>;
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
......@@ -263,92 +312,63 @@
ranges = <02000000 0 b0000000
02000000 0 b0000000
0 00100000
01000000 0 00000000
01000000 0 00000000
0 00100000>;
pci_bridge@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <02000000 0 b0000000
02000000 0 b0000000
0 00100000
01000000 0 00000000
01000000 0 00000000
0 00100000>;
isa@1e {
device_type = "isa";
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <f000 0 0 0 0>;
ranges = <1 0
01000000 0 0
00001000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
reg = <1 20 2
1 a0 2
1 4d0 2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <f000 0 0 0 0>;
ranges = <1 0
01000000 0 0
00001000>;
compatible = "chrp,iic";
interrupts = <9 2>;
interrupt-parent = <&mpic>;
};
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <1 60 1 1 64 1>;
interrupts = <1 3 c 3>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
reg = <1 20 2
1 a0 2
1 4d0 2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <9 2>;
interrupt-parent = <&mpic>;
keyboard@0 {
reg = <0>;
compatible = "pnpPNP,303";
};
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <1 60 1 1 64 1>;
interrupts = <1 3 c 3>;
interrupt-parent = <&i8259>;
keyboard@0 {
reg = <0>;
compatible = "pnpPNP,303";
};
mouse@1 {
reg = <1>;
compatible = "pnpPNP,f03";
};
mouse@1 {
reg = <1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <1 70 2>;
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <1 70 2>;
};
gpio@400 {
reg = <1 400 80>;
};
gpio@400 {
reg = <1 400 80>;
};
};
};
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8548-guts";
reg = <e0000 1000>;
fsl,has-rstcr;
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
};
};
......@@ -42,13 +42,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <00001000 e0001000 000ff000
80000000 80000000 10000000
e2000000 e2000000 00800000
90000000 90000000 10000000
e2800000 e2800000 00800000
a0000000 a0000000 20000000
e3000000 e3000000 01000000>;
ranges = <00000000 e0000000 00100000>;
reg = <e0000000 00001000>; // CCSRBAR
bus-frequency = <0>;
......@@ -187,212 +181,225 @@
fsl,has-rstcr;
};
pci@8000 {
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
};
pci@e0008000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
02000 0 0 1 &mpic 0 1
02000 0 0 2 &mpic 1 1
02000 0 0 3 &mpic 2 1
02000 0 0 4 &mpic 3 1
/* IDSEL 0x5 (PCIX Slot 3) */
02800 0 0 1 &mpic 1 1
02800 0 0 2 &mpic 2 1
02800 0 0 3 &mpic 3 1
02800 0 0 4 &mpic 0 1
/* IDSEL 0x6 (PCIX Slot 4) */
03000 0 0 1 &mpic 2 1
03000 0 0 2 &mpic 3 1
03000 0 0 3 &mpic 0 1
03000 0 0 4 &mpic 1 1
/* IDSEL 0x8 (PCIX Slot 5) */
04000 0 0 1 &mpic 0 1
04000 0 0 2 &mpic 1 1
04000 0 0 3 &mpic 2 1
04000 0 0 4 &mpic 3 1
/* IDSEL 0xC (Tsi310 bridge) */
06000 0 0 1 &mpic 0 1
06000 0 0 2 &mpic 1 1
06000 0 0 3 &mpic 2 1
06000 0 0 4 &mpic 3 1
/* IDSEL 0x14 (Slot 2) */
0a000 0 0 1 &mpic 0 1
0a000 0 0 2 &mpic 1 1
0a000 0 0 3 &mpic 2 1
0a000 0 0 4 &mpic 3 1
/* IDSEL 0x15 (Slot 3) */
0a800 0 0 1 &mpic 1 1
0a800 0 0 2 &mpic 2 1
0a800 0 0 3 &mpic 3 1
0a800 0 0 4 &mpic 0 1
/* IDSEL 0x16 (Slot 4) */
0b000 0 0 1 &mpic 2 1
0b000 0 0 2 &mpic 3 1
0b000 0 0 3 &mpic 0 1
0b000 0 0 4 &mpic 1 1
/* IDSEL 0x18 (Slot 5) */
0c000 0 0 1 &mpic 0 1
0c000 0 0 2 &mpic 1 1
0c000 0 0 3 &mpic 2 1
0c000 0 0 4 &mpic 3 1
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
0E000 0 0 1 &mpic 0 1
0E000 0 0 2 &mpic 1 1
0E000 0 0 3 &mpic 2 1
0E000 0 0 4 &mpic 3 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00800000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008000 1000>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
pci_bridge@1c {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
02000 0 0 1 &mpic 0 1
02000 0 0 2 &mpic 1 1
02000 0 0 3 &mpic 2 1
02000 0 0 4 &mpic 3 1
/* IDSEL 0x5 (PCIX Slot 3) */
02800 0 0 1 &mpic 1 1
02800 0 0 2 &mpic 2 1
02800 0 0 3 &mpic 3 1
02800 0 0 4 &mpic 0 1
/* IDSEL 0x6 (PCIX Slot 4) */
03000 0 0 1 &mpic 2 1
03000 0 0 2 &mpic 3 1
03000 0 0 3 &mpic 0 1
03000 0 0 4 &mpic 1 1
/* IDSEL 0x8 (PCIX Slot 5) */
04000 0 0 1 &mpic 0 1
04000 0 0 2 &mpic 1 1
04000 0 0 3 &mpic 2 1
04000 0 0 4 &mpic 3 1
/* IDSEL 0xC (Tsi310 bridge) */
06000 0 0 1 &mpic 0 1
06000 0 0 2 &mpic 1 1
06000 0 0 3 &mpic 2 1
06000 0 0 4 &mpic 3 1
/* IDSEL 0x14 (Slot 2) */
0a000 0 0 1 &mpic 0 1
0a000 0 0 2 &mpic 1 1
0a000 0 0 3 &mpic 2 1
0a000 0 0 4 &mpic 3 1
/* IDSEL 0x15 (Slot 3) */
0a800 0 0 1 &mpic 1 1
0a800 0 0 2 &mpic 2 1
0a800 0 0 3 &mpic 3 1
0a800 0 0 4 &mpic 0 1
/* IDSEL 0x16 (Slot 4) */
0b000 0 0 1 &mpic 2 1
0b000 0 0 2 &mpic 3 1
0b000 0 0 3 &mpic 0 1
0b000 0 0 4 &mpic 1 1
/* IDSEL 0x18 (Slot 5) */
0c000 0 0 1 &mpic 0 1
0c000 0 0 2 &mpic 1 1
0c000 0 0 3 &mpic 2 1
0c000 0 0 4 &mpic 3 1
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
0E000 0 0 1 &mpic 0 1
0E000 0 0 2 &mpic 1 1
0E000 0 0 3 &mpic 2 1
0E000 0 0 4 &mpic 3 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00800000>;
clock-frequency = <3f940aa>;
/* IDSEL 0x00 (PrPMC Site) */
0000 0 0 1 &mpic 0 1
0000 0 0 2 &mpic 1 1
0000 0 0 3 &mpic 2 1
0000 0 0 4 &mpic 3 1
/* IDSEL 0x04 (VIA chip) */
2000 0 0 1 &mpic 0 1
2000 0 0 2 &mpic 1 1
2000 0 0 3 &mpic 2 1
2000 0 0 4 &mpic 3 1
/* IDSEL 0x05 (8139) */
2800 0 0 1 &mpic 1 1
/* IDSEL 0x06 (Slot 6) */
3000 0 0 1 &mpic 2 1
3000 0 0 2 &mpic 3 1
3000 0 0 3 &mpic 0 1
3000 0 0 4 &mpic 1 1
/* IDESL 0x07 (Slot 7) */
3800 0 0 1 &mpic 3 1
3800 0 0 2 &mpic 0 1
3800 0 0 3 &mpic 1 1
3800 0 0 4 &mpic 2 1>;
reg = <e000 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8000 1000>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
ranges = <02000000 0 80000000
02000000 0 80000000
0 20000000
01000000 0 00000000
01000000 0 00000000
0 00080000>;
clock-frequency = <1fca055>;
pci_bridge@1c {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
0000 0 0 1 &mpic 0 1
0000 0 0 2 &mpic 1 1
0000 0 0 3 &mpic 2 1
0000 0 0 4 &mpic 3 1
/* IDSEL 0x04 (VIA chip) */
2000 0 0 1 &mpic 0 1
2000 0 0 2 &mpic 1 1
2000 0 0 3 &mpic 2 1
2000 0 0 4 &mpic 3 1
/* IDSEL 0x05 (8139) */
2800 0 0 1 &mpic 1 1
/* IDSEL 0x06 (Slot 6) */
3000 0 0 1 &mpic 2 1
3000 0 0 2 &mpic 3 1
3000 0 0 3 &mpic 0 1
3000 0 0 4 &mpic 1 1
/* IDESL 0x07 (Slot 7) */
3800 0 0 1 &mpic 3 1
3800 0 0 2 &mpic 0 1
3800 0 0 3 &mpic 1 1
3800 0 0 4 &mpic 2 1>;
reg = <e000 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <02000000 0 80000000
02000000 0 80000000
0 20000000
01000000 0 00000000
01000000 0 00000000
0 00080000>;
clock-frequency = <1fca055>;
isa@4 {
device_type = "isa";
isa@4 {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <2000 0 0 0 0>;
ranges = <1 0 01000000 0 0 00001000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <1 20 2
1 a0 2
1 4d0 2>;
#address-cells = <0>;
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <2000 0 0 0 0>;
ranges = <1 0 01000000 0 0 00001000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <1 20 2
1 a0 2
1 4d0 2>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <0 1>;
interrupt-parent = <&mpic>;
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <1 70 2>;
};
compatible = "chrp,iic";
interrupts = <0 1>;
interrupt-parent = <&mpic>;
};
};
};
pci@9000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 &mpic b 1
a800 0 0 2 &mpic 1 1
a800 0 0 3 &mpic 2 1
a800 0 0 4 &mpic 3 1>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
01000000 0 00000000 e2800000 0 00800000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <9000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
rtc@70 {
compatible = "pnpPNP,b00";
reg = <1 70 2>;
};
};
};
/* PCI Express */
pcie@a000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
};
/* IDSEL 0x0 (PEX) */
00000 0 0 1 &mpic 0 1
00000 0 0 2 &mpic 1 1
00000 0 0 3 &mpic 2 1
00000 0 0 4 &mpic 3 1>;
pci@e0009000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 &mpic b 1
a800 0 0 2 &mpic 1 1
a800 0 0 3 &mpic 2 1
a800 0 0 4 &mpic 3 1>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
01000000 0 00000000 e2800000 0 00800000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0009000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
interrupt-parent = <&mpic>;
interrupts = <1a 2>;
bus-range = <0 ff>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
01000000 0 00000000 e3000000 0 08000000>;
clock-frequency = <1fca055>;
#interrupt-cells = <1>;
pcie@e000a000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
00000 0 0 1 &mpic 0 1
00000 0 0 2 &mpic 1 1
00000 0 0 3 &mpic 2 1
00000 0 0 4 &mpic 3 1>;
interrupt-parent = <&mpic>;
interrupts = <1a 2>;
bus-range = <0 ff>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
01000000 0 00000000 e3000000 0 08000000>;
clock-frequency = <1fca055>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e000a000 1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
pcie@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
reg = <a000 1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
};
ranges = <02000000 0 a0000000
02000000 0 a0000000
0 20000000
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
01000000 0 00000000
01000000 0 00000000
0 08000000>;
};
};
};
......@@ -43,7 +43,7 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00100000>; // CCSRBAR 1M
reg = <e0000000 00001000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
......@@ -135,100 +135,6 @@
interrupt-parent = <&mpic>;
};
pci1: pci@8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
08000 0 0 1 &mpic 0 1
08000 0 0 2 &mpic 1 1
08000 0 0 3 &mpic 2 1
08000 0 0 4 &mpic 3 1
/* IDSEL 0x11 */
08800 0 0 1 &mpic 0 1
08800 0 0 2 &mpic 1 1
08800 0 0 3 &mpic 2 1
08800 0 0 4 &mpic 3 1
/* IDSEL 0x12 (Slot 1) */
09000 0 0 1 &mpic 0 1
09000 0 0 2 &mpic 1 1
09000 0 0 3 &mpic 2 1
09000 0 0 4 &mpic 3 1
/* IDSEL 0x13 (Slot 2) */
09800 0 0 1 &mpic 1 1
09800 0 0 2 &mpic 2 1
09800 0 0 3 &mpic 3 1
09800 0 0 4 &mpic 0 1
/* IDSEL 0x14 (Slot 3) */
0a000 0 0 1 &mpic 2 1
0a000 0 0 2 &mpic 3 1
0a000 0 0 3 &mpic 0 1
0a000 0 0 4 &mpic 1 1
/* IDSEL 0x15 (Slot 4) */
0a800 0 0 1 &mpic 3 1
0a800 0 0 2 &mpic 0 1
0a800 0 0 3 &mpic 1 1
0a800 0 0 4 &mpic 2 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
19000 0 0 1 &mpic 0 1
19000 0 0 2 &mpic 1 1
19000 0 0 3 &mpic 2 1
19000 0 0 4 &mpic 3 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
i8259@19000 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <19000 0 0 0 1>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <1>;
interrupt-parent = <&pci1>;
};
};
pci@9000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 &mpic b 1
a800 0 0 2 &mpic b 1
a800 0 0 3 &mpic b 1
a800 0 0 4 &mpic b 1>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
01000000 0 00000000 e3000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <9000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
......@@ -240,4 +146,98 @@
big-endian;
};
};
pci1: pci@e0008000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
08000 0 0 1 &mpic 0 1
08000 0 0 2 &mpic 1 1
08000 0 0 3 &mpic 2 1
08000 0 0 4 &mpic 3 1
/* IDSEL 0x11 */
08800 0 0 1 &mpic 0 1
08800 0 0 2 &mpic 1 1
08800 0 0 3 &mpic 2 1
08800 0 0 4 &mpic 3 1
/* IDSEL 0x12 (Slot 1) */
09000 0 0 1 &mpic 0 1
09000 0 0 2 &mpic 1 1
09000 0 0 3 &mpic 2 1
09000 0 0 4 &mpic 3 1
/* IDSEL 0x13 (Slot 2) */
09800 0 0 1 &mpic 1 1
09800 0 0 2 &mpic 2 1
09800 0 0 3 &mpic 3 1
09800 0 0 4 &mpic 0 1
/* IDSEL 0x14 (Slot 3) */
0a000 0 0 1 &mpic 2 1
0a000 0 0 2 &mpic 3 1
0a000 0 0 3 &mpic 0 1
0a000 0 0 4 &mpic 1 1
/* IDSEL 0x15 (Slot 4) */
0a800 0 0 1 &mpic 3 1
0a800 0 0 2 &mpic 0 1
0a800 0 0 3 &mpic 1 1
0a800 0 0 4 &mpic 2 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
19000 0 0 1 &mpic 0 1
19000 0 0 2 &mpic 1 1
19000 0 0 3 &mpic 2 1
19000 0 0 4 &mpic 3 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
i8259@19000 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <19000 0 0 0 1>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <1>;
interrupt-parent = <&pci1>;
};
};
pci@e0009000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 &mpic b 1
a800 0 0 2 &mpic b 1
a800 0 0 3 &mpic b 1
a800 0 0 4 &mpic b 1>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
01000000 0 00000000 e3000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0009000 1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
};
......@@ -130,96 +130,6 @@
phy-handle = <&phy1>;
};
pci@8000 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
reg = <8000 1000>;
clock-frequency = <3f940aa>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x2 */
1000 0 0 1 &mpic 1 1
1000 0 0 2 &mpic 2 1
1000 0 0 3 &mpic 3 1
1000 0 0 4 &mpic 4 1
/* IDSEL 0x3 */
1800 0 0 1 &mpic 4 1
1800 0 0 2 &mpic 1 1
1800 0 0 3 &mpic 2 1
1800 0 0 4 &mpic 3 1
/* IDSEL 0x4 */
2000 0 0 1 &mpic 3 1
2000 0 0 2 &mpic 4 1
2000 0 0 3 &mpic 1 1
2000 0 0 4 &mpic 2 1
/* IDSEL 0x5 */
2800 0 0 1 &mpic 2 1
2800 0 0 2 &mpic 3 1
2800 0 0 3 &mpic 4 1
2800 0 0 4 &mpic 1 1
/* IDSEL 12 */
6000 0 0 1 &mpic 1 1
6000 0 0 2 &mpic 2 1
6000 0 0 3 &mpic 3 1
6000 0 0 4 &mpic 4 1
/* IDSEL 13 */
6800 0 0 1 &mpic 4 1
6800 0 0 2 &mpic 1 1
6800 0 0 3 &mpic 2 1
6800 0 0 4 &mpic 3 1
/* IDSEL 14*/
7000 0 0 1 &mpic 3 1
7000 0 0 2 &mpic 4 1
7000 0 0 3 &mpic 1 1
7000 0 0 4 &mpic 2 1
/* IDSEL 15 */
7800 0 0 1 &mpic 2 1
7800 0 0 2 &mpic 3 1
7800 0 0 3 &mpic 4 1
7800 0 0 4 &mpic 1 1
/* IDSEL 18 */
9000 0 0 1 &mpic 1 1
9000 0 0 2 &mpic 2 1
9000 0 0 3 &mpic 3 1
9000 0 0 4 &mpic 4 1
/* IDSEL 19 */
9800 0 0 1 &mpic 4 1
9800 0 0 2 &mpic 1 1
9800 0 0 3 &mpic 2 1
9800 0 0 4 &mpic 3 1
/* IDSEL 20 */
a000 0 0 1 &mpic 3 1
a000 0 0 2 &mpic 4 1
a000 0 0 3 &mpic 1 1
a000 0 0 4 &mpic 2 1
/* IDSEL 21 */
a800 0 0 1 &mpic 2 1
a800 0 0 2 &mpic 3 1
a800 0 0 3 &mpic 4 1
a800 0 0 4 &mpic 1 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 01000000>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
......@@ -319,4 +229,94 @@
};
};
};
pci@e0008000 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
reg = <e0008000 1000>;
clock-frequency = <3f940aa>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x2 */
1000 0 0 1 &mpic 1 1
1000 0 0 2 &mpic 2 1
1000 0 0 3 &mpic 3 1
1000 0 0 4 &mpic 4 1
/* IDSEL 0x3 */
1800 0 0 1 &mpic 4 1
1800 0 0 2 &mpic 1 1
1800 0 0 3 &mpic 2 1
1800 0 0 4 &mpic 3 1
/* IDSEL 0x4 */
2000 0 0 1 &mpic 3 1
2000 0 0 2 &mpic 4 1
2000 0 0 3 &mpic 1 1
2000 0 0 4 &mpic 2 1
/* IDSEL 0x5 */
2800 0 0 1 &mpic 2 1
2800 0 0 2 &mpic 3 1
2800 0 0 3 &mpic 4 1
2800 0 0 4 &mpic 1 1
/* IDSEL 12 */
6000 0 0 1 &mpic 1 1
6000 0 0 2 &mpic 2 1
6000 0 0 3 &mpic 3 1
6000 0 0 4 &mpic 4 1
/* IDSEL 13 */
6800 0 0 1 &mpic 4 1
6800 0 0 2 &mpic 1 1
6800 0 0 3 &mpic 2 1
6800 0 0 4 &mpic 3 1
/* IDSEL 14*/
7000 0 0 1 &mpic 3 1
7000 0 0 2 &mpic 4 1
7000 0 0 3 &mpic 1 1
7000 0 0 4 &mpic 2 1
/* IDSEL 15 */
7800 0 0 1 &mpic 2 1
7800 0 0 2 &mpic 3 1
7800 0 0 3 &mpic 4 1
7800 0 0 4 &mpic 1 1
/* IDSEL 18 */
9000 0 0 1 &mpic 1 1
9000 0 0 2 &mpic 2 1
9000 0 0 3 &mpic 3 1
9000 0 0 4 &mpic 4 1
/* IDSEL 19 */
9800 0 0 1 &mpic 4 1
9800 0 0 2 &mpic 1 1
9800 0 0 3 &mpic 2 1
9800 0 0 4 &mpic 3 1
/* IDSEL 20 */
a000 0 0 1 &mpic 3 1
a000 0 0 2 &mpic 4 1
a000 0 0 3 &mpic 1 1
a000 0 0 4 &mpic 2 1
/* IDSEL 21 */
a800 0 0 1 &mpic 2 1
a800 0 0 2 &mpic 3 1
a800 0 0 3 &mpic 4 1
a800 0 0 4 &mpic 1 1>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 01000000>;
};
};
......@@ -53,11 +53,7 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <00001000 f8001000 000ff000
80000000 80000000 20000000
e2000000 e2000000 00100000
a0000000 a0000000 20000000
e3000000 e3000000 00100000>;
ranges = <00000000 f8000000 00100000>;
reg = <f8000000 00001000>; // CCSRBAR
bus-frequency = <0>;
......@@ -208,50 +204,75 @@
interrupt-parent = <&mpic>;
};
pcie@8000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
interrupt-map-mask = <fb00 0 0 0>;
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 &i8259 9 2
8800 0 0 2 &i8259 a 2
8800 0 0 3 &i8259 b 2
8800 0 0 4 &i8259 c 2
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
};
/* IDSEL 0x12 */
9000 0 0 1 &i8259 a 2
9000 0 0 2 &i8259 b 2
9000 0 0 3 &i8259 c 2
9000 0 0 4 &i8259 9 2
pcie@f8008000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <f8008000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
interrupt-map-mask = <fb00 0 0 0>;
interrupt-map = <
/* IDSEL 0x11 */
8800 0 0 1 &i8259 9 2
8800 0 0 2 &i8259 a 2
8800 0 0 3 &i8259 b 2
8800 0 0 4 &i8259 c 2
// IDSEL 0x1c USB
e000 0 0 0 &i8259 c 2
e100 0 0 0 &i8259 9 2
e200 0 0 0 &i8259 a 2
e300 0 0 0 &i8259 b 2
/* IDSEL 0x12 */
9000 0 0 1 &i8259 a 2
9000 0 0 2 &i8259 b 2
9000 0 0 3 &i8259 c 2
9000 0 0 4 &i8259 9 2
// IDSEL 0x1d Audio
e800 0 0 0 &i8259 6 2
// IDSEL 0x1c USB
e000 0 0 0 &i8259 c 2
e100 0 0 0 &i8259 9 2
e200 0 0 0 &i8259 a 2
e300 0 0 0 &i8259 b 2
// IDSEL 0x1e Legacy
f000 0 0 0 &i8259 7 2
f100 0 0 0 &i8259 7 2
// IDSEL 0x1d Audio
e800 0 0 0 &i8259 6 2
// IDSEL 0x1f IDE/SATA
f800 0 0 0 &i8259 e 2
f900 0 0 0 &i8259 5 2
>;
// IDSEL 0x1e Legacy
f000 0 0 0 &i8259 7 2
f100 0 0 0 &i8259 7 2
// IDSEL 0x1f IDE/SATA
f800 0 0 0 &i8259 e 2
f900 0 0 0 &i8259 5 2
>;
pcie@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <02000000 0 80000000
02000000 0 80000000
0 20000000
01000000 0 00000000
01000000 0 00000000
0 00100000>;
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
......@@ -262,108 +283,96 @@
01000000 0 00000000
01000000 0 00000000
0 00100000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <f000 0 0 0 0>;
ranges = <1 0 01000000 0 0
00001000>;
interrupt-parent = <&i8259>;
pci_bridge@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <02000000 0 80000000
02000000 0 80000000
0 20000000
01000000 0 00000000
01000000 0 00000000
0 00100000>;
isa@1e {
device_type = "isa";
i8259: interrupt-controller@20 {
reg = <1 20 2
1 a0 2
1 4d0 2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <f000 0 0 0 0>;
ranges = <1 0 01000000 0 0
00001000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
reg = <1 20 2
1 a0 2
1 4d0 2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <9 2>;
interrupt-parent =
<&mpic>;
};
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <1 60 1 1 64 1>;
interrupts = <1 3 c 3>;
interrupt-parent =
<&i8259>;
compatible = "chrp,iic";
interrupts = <9 2>;
interrupt-parent = <&mpic>;
};
keyboard@0 {
reg = <0>;
compatible = "pnpPNP,303";
};
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <1 60 1 1 64 1>;
interrupts = <1 3 c 3>;
interrupt-parent =
<&i8259>;
mouse@1 {
reg = <1>;
compatible = "pnpPNP,f03";
};
keyboard@0 {
reg = <0>;
compatible = "pnpPNP,303";
};
rtc@70 {
compatible =
"pnpPNP,b00";
reg = <1 70 2>;
mouse@1 {
reg = <1>;
compatible = "pnpPNP,f03";
};
};
gpio@400 {
reg = <1 400 80>;
};
rtc@70 {
compatible =
"pnpPNP,b00";
reg = <1 70 2>;
};
gpio@400 {
reg = <1 400 80>;
};
};
};
};
pcie@9000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
};
pcie@f8009000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <f8009000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
01000000 0 00000000 e3000000 0 00100000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 4 1
0000 0 0 2 &mpic 5 1
0000 0 0 3 &mpic 6 1
0000 0 0 4 &mpic 7 1
>;
pcie@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
reg = <9000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
01000000 0 00000000 e3000000 0 00100000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 4 1
0000 0 0 2 &mpic 5 1
0000 0 0 3 &mpic 6 1
0000 0 0 4 &mpic 7 1
>;
};
device_type = "pci";
ranges = <02000000 0 a0000000
02000000 0 a0000000
0 20000000
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
01000000 0 00000000
01000000 0 00000000
0 00100000>;
};
};
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册