BMIPS435x and BMIPS438x have a single shared L1 D$ and load/store unit,
so it isn't necessary to raise IPIs to keep both CPUs coherent.

BMIPS5000 has VIPT L1 caches that handle aliases in hardware, and its I$
fills from D$.  But a special sequence with 2 SYNCs and 32 NOPs is needed
to ensure coherency.
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: mbizon@freebox.fr
Cc: jogo@openwrt.org
Cc: jfraser@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8165/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On some chips like bcm3384, "other stuff" gets wired up to CPU1's IE_IRQ1
input, generating spurious IRQs.  In this case we want the platform code
to be able to mask it off.
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: mbizon@freebox.fr
Cc: jogo@openwrt.org
Cc: jfraser@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8163/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

BMIPS438x has a 64-byte D$ line size and BMIPS5000 has a 128-byte L2
line size.  If L1_CACHE_SHIFT is undersized, DMA buffers will not be
cacheline-aligned and terrible things will happen.
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: mbizon@freebox.fr
Cc: jogo@openwrt.org
Cc: jfraser@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8164/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CONFIG_MIPS_CPU_SCACHE determines whether to build sc-mips.c.  However,
it is currently hardwired to use an L1_SHIFT of 6 (64 bytes).  Move the
L1_SHIFT selection into the CPU or SoC section so that other SoCs can
select different values.
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: mbizon@freebox.fr
Cc: jogo@openwrt.org
Cc: jfraser@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8162/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The secondary CPU's reset vector needs to be set to KSEG1 for a cold
boot (release from reset), or KSEG0 for a warm restart.  On a cold boot
KSEG0 may be unavailable (BMIPS4380), and on a warm restart KSEG1 may
be unavailable (XKS01 mode on 4380 or 5000).
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: mbizon@freebox.fr
Cc: jogo@openwrt.org
Cc: jfraser@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8161/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CPU interrupts need to be disabled on a cpu being taken down.
When a cpu is hot-plugged out of the system the following sequence occurs.

On the CPU where the hotplug sequence was initiated:
    cpu_down
        _cpu_down {
            __cpu_notify(CPU_DOWN_PREPARE
            __stop_machine(take_cpu_down
                wait for cpu to run disable code.
            __cpu_die
        }

On the CPU  being disabled:
    take_cpu_down
        __cpu_disable {
            mp_ops->cpu_disable
                bmips_cpu_disable
                    clear_c0_status(IE_IRQ5) (added)
            cpu_notify(CPU_DYING...
        }

Before the cpu_notifier is called with CPU_DYING, all interrupts on the
dying cpu must be disabled.  This guarantees that before tick_notify is
called with the CPU_DYING event and sets the clock device pointer to
NULL, there can not be any more clock interrupts.

When this wasn't done, an unfortunately-timed timer interrupt sometimes
caused hangs immediately prior to system suspend:

    Debug PM is not enabled. To enable partial suspend, rebuild kernel with CONFIG_PM_DEBUG
    Pass 1 out of 1,PM: Syncing filesystems ... mode=none, tp1=done.
    1, flags=5, cycle_tp=, sleep=
    Freezing user space processes ... (elapsed 0.01 seconds) done.
    Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    PM: suspend of devices complete after 54.199 msecs
    PM: late suspend of devices complete after 0.172 msecs
    Disabling non-boot CPUs ...
    SMP: CPU1 is offline
    INFO: rcu_sched detected stalls on CPUs/tasks: { 3} (detected by 0, t=62537 jiffies)
    Call Trace:
    [<804baa78>] dump_stack+0x8/0x34
    [<8008a2d8>] __rcu_pending+0x4b8/0x55c
    [<8008adf4>] rcu_check_callbacks+0x78/0x180
    [<80037830>] update_process_times+0x40/0x6c
    [<80072fe4>] tick_sched_timer+0x74/0xe4
    [<80050180>] __run_hrtimer.clone.30+0x64/0x140
    [<80051150>] hrtimer_interrupt+0x19c/0x4bc
    [<8000cdb8>] c0_compare_interrupt+0x50/0x88
    [<80081b18>] handle_irq_event_percpu+0x5c/0x2f4
    [<80086490>] handle_percpu_irq+0x8c/0xc0
    [<800811b4>] generic_handle_irq+0x34/0x54
    [<800067dc>] do_IRQ+0x18/0x2c
    [<8000375c>] plat_irq_dispatch+0xd0/0x128
    [<80004a04>] ret_from_irq+0x0/0x4
    [<80004c40>] r4k_wait+0x20/0x40
    [<80006b6c>] cpu_idle+0x98/0xf0
    [<805d3988>] start_kernel+0x424/0x440
Signed-off-by: NJon Fraser <jfraser@broadcom.com>
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: mbizon@freebox.fr
Cc: jogo@openwrt.org
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8160/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

BMIPS3300 processors do not have the hardware to support SMP, but with a
small tweak, the SMP ebase relocation code allows BMIPS3300-based
platforms to reuse the S2/S3 power management code from BMIPS4380-based
chips.  Normally this is as simple as adding one line to prom_init():

    board_ebase_setup = &bmips_ebase_setup;
Signed-off-by: NJon Fraser <jfraser@broadcom.com>
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: mbizon@freebox.fr
Cc: jogo@openwrt.org
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8159/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This will need to be called from a few different places, and the logic
is starting to get a bit hairy (with the need for IPIs, CPU bug
workarounds, and hazards).
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: mbizon@freebox.fr
Cc: jogo@openwrt.org
Cc: jfraser@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8158/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

On some older BMIPS5200 (dual core / quad thread) platforms, the
PROM code set up CPU2/CPU3 so they would be started through an NMI
instead of through the ACTION register.  But this was incompatible with
some power management features that were later added, so the scheme was
changed so that Linux is fully responsible for booting CPU2/CPU3.
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: mbizon@freebox.fr
Cc: jogo@openwrt.org
Cc: jfraser@broadcom.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8157/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- Add clock lookups for APB devices.
 - Update clock relationship to make it more exact and clear.
                                 _____
         _______________________|     |
 OSC ___/                       | MUX |___ XXX CLK
        \___ PLL ___ XXX DIV ___|     |
                                |_____|
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: mturquette@linaro.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8026/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch add a clockevent/clocksource using PWM Timer for Loongson1B,
which is based on earlier work by Tang, Haifeng.
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8025/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- Fix hanging ethernet issue of LS1B v2.0 by adding pbl field in plat data.
   (It seems that the MAC controller of LS1B v2.0 can only accept pbl=1)
 - Add GMAC1 support and setup MUX in terms of PHY mode.
 - Add CPUFreq support.
 - Add MUX Register Definitions.
 - Add PWM Register Definitions.
 - Update clock register bitfields according to the latest spec.
 - Update clock related stuff.
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8024/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- Determine serial port for early printk according to kernel command line.
  - Move to 8250/16550 serial early printk driver.
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8023/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- Correct the header file of watchdog registers
 - Use ioremap_nocache() to access watchdog registers instead
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8022/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

1) Move private defines to the .c file
2) Move SPROM helper to the sprom.c
3) Drop unused code
4) Rename magic to the NVRAM_MAGIC
5) Add const to the char pointer we never modify
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8289/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

NVRAM can be read using magic memory offset, but after all it's just a
flash partition. On platforms where NVRAM isn't needed early we can get
it using mtd subsystem.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8266/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The hybrid FPR scheme exists to allow for compatibility between existing
FP32 code and newly compiled FP64A code. Such code should hopefully be
rare in the real world, and for the moment is difficult to come across.
All code except that built for the FP64 ABI can correctly execute using
the hybrid FPR scheme, so debugging the hybrid FPR implementation can
be eased by forcing all such code to use it. This is undesirable in
general due to the trap & emulate overhead of the hybrid FPR
implementation, but is a very useful option to have for debugging.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7680/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch reads the .MIPS.abiflags section when it is present, and sets
the FP mode of the task accordingly. Any loaded ELF files which do not
contain a .MIPS.abiflags section will continue to observe the previous
behaviour, that is FR=1 if EF_MIPS_FP64 is set else FR=0.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7681/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

New toolchains will generate a .MIPS.abiflags section, referenced by a
new PT_MIPS_ABIFLAGS program header. This section will provide
information about the requirements of the ELF, including the ISA level
the code is built for, the ASEs it requires, the size of various
registers and its expectations of the floating point mode. This patch
introduces a definition of the structure of this section and the program
header, for use in a subsequent patch.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7682/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Hybrid FPRs is a scheme where scalar FP registers are 64b wide, but
accesses to odd indexed single registers use bits 63:32 of the
preceeding even indexed 64b register. In this mode all FP code
except that built for the plain FP64 ABI can execute correctly. Most
notably a combination of FP64A & FP32 code can execute correctly,
allowing for existing FP32 binaries to be linked with new FP64A binaries
that can make use of 64 bit FP & MSA.

Hybrid FPRs are implemented by setting both the FR & FRE bits, trapping
& emulating single precision FP instructions (via Reserved Instruction
exceptions) whilst allowing others to execute natively. It therefore has
a penalty in terms of execution speed, and should only be used when no
fully native mode can be. As more binaries are recompiled to use either
the FPXX or FP64(A) ABIs, the need for hybrid FPRs should diminish.
However in the short to mid term it allows for a gradual transition
towards that world, rather than a complete ABI break which is not
feasible for some users & not desirable for many.

A task will be executed using the hybrid FPR scheme when its
TIF_HYBRID_FPREGS flag is set & TIF_32BIT_FPREGS is clear. A further
patch will set the flags as necessary, this patch simply adds the
infrastructure necessary for the hybrid FPR mode to work.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7683/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As is done for UFR, ensure that userland cannot directly manipulate the
mode by clearing the UFE bit during boot.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7677/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Detect the presence of the Config5 FRE & UFE bits, as indicated by the
FREP bit in FPIR. Record this as a CPU option bit, and provide a
cpu_has_fre macro to ease checking of that option bit.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7678/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add definitions for the FRE & UFE bits in Config5, and the FREP bit in
FPIR. These bits are used to support a hybrid FPR scheme allowing a
mixture of FP32 & FP64 code to execute within a task.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7674/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

MIPS is introducing new variants of its O32 ABI which differ in their
handling of floating point, in order to enable a gradual transition
towards a world where mips32 binaries can take advantage of new hardware
features only available when configured for certain FP modes. In order
to do this ELF binaries are being augmented with a new section that
indicates, amongst other things, the FP mode requirements of the binary.
The presence & location of such a section is indicated by a program
header in the PT_LOPROC ... PT_HIPROC range.

In order to allow the MIPS architecture code to examine the program
header & section in question, pass all program headers in this range
to an architecture-specific arch_elf_pt_proc function. This function
may return an error if the header is deemed invalid or unsuitable for
the system, in which case that error will be returned from
load_elf_binary and upwards through the execve syscall.

A means is required for the architecture code to make a decision once
it is known that all such headers have been seen, but before it is too
late to return from an execve syscall. For this purpose the
arch_check_elf function is added, and called once, after all PT_LOPROC
to PT_HIPROC headers have been passed to arch_elf_pt_proc but before
the code which invoked execve has been lost. This enables the
architecture code to make a decision based upon all the headers present
in an ELF binary and its interpreter, as is required to forbid
conflicting FP ABI requirements between an ELF & its interpreter.

In order to allow data to be stored throughout the calls to the above
functions, struct arch_elf_state is introduced.

Finally a variant of the SET_PERSONALITY macro is introduced which
accepts a pointer to the struct arch_elf_state, allowing it to act
based upon state observed from the architecture specific program
headers.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7679/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Load the program headers of an ELF interpreter early enough in
load_elf_binary that they can be examined before it's too late to return
an error from an exec syscall. This patch does not perform any such
checking, it merely lays the groundwork for a further patch to do so.

No functional change is intended.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7675/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

load_elf_binary & load_elf_interp both load program headers from an ELF
executable in the same way, duplicating the code. This patch introduces
a helper function (load_elf_phdrs) which performs this common task &
calls it from both load_elf_binary & load_elf_interp. In addition to
reducing code duplication, this is part of preparing to load the ELF
interpreter headers earlier such that they can be examined before it's
too late to return an error from an exec syscall.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7676/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CPUFreq driver need external timer, so add hpet at first.

In Loongson 3, only Core-0 can receive external interrupt. As a result,
timekeeping cannot absolutely use HPET timer. We use a hybrid solution:
Core-0 use HPET as its clock event device, but other cores still use
MIPS; clock source is global and doesn't need interrupt, so use HPET.
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Signed-off-by: NHongliang Tao <taohl@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/8329/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Loongson-3 has two groups of performance counters, they are 4 sub-
registers of CP0's REG25. This patch add oprofile support.

REG25, sel 0: Perf Control of group 0;
REG25, sel 1: Perf Counter of group 0;
REG25, sel 2: Perf Control of group 1;
REG25, sel 3: Perf Counter of group 1.
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/8328/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Machtypes of Loongson-3 machines become more and more, but there are
only small differences among different machtypes. Keeping a large table
of machtypes is very ugly and hard to extend. We found that the major
machtype differences are UARTs information (number of UARTs, UART IRQs,
UART clocks, etc.), platform devices (EC, temperature sensors, fan
controllers, etc.) and some workarounds (because of some CPU bugs or
mainboard bugs).

In this patch we improve the UEFI-like (LEFI) interface to make all
Loongson-3 machines use a same machtype "generic-loongson-machine".
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/8324/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

By offering Logical->Physical core id mapping, so as to reserve some
physical cores via mask. This allow booting from any core when core-0
has problems. Since the maximun cores supported by Loongson-3 is 16,
32-bit cpu_startup_core_id can be split to 16-bit cpu_startup_core_id
and 16-bit reserved_cores_mask for compatibility.
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/8323/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The width of HT-bus is only 40-bit, but Loongson-3 has 48-bit physical
address. This implies only node-0's memory is DMAable because high bits
(Node ID) will lost. Fortunately, by configuring address windows in
firmware, we can extract 2bit Node ID (bit 44~47, only bit 44~45 used
now) from Loongson-3's 48-bit address space and embed it into 40-bit
(bit 37~38). Every NUMA node can do DMA now (however, maximum memory of
each node is reduced to 2^37 = 128GB).
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/8321/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NIsamu Mogi <isamu@leafytree.jp>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8292/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Also include asm/mmu_context.h for ASID_MASK.
Signed-off-by: NIsamu Mogi <isamu@leafytree.jp>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8291/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Initializaion with memory allocator available will be much simpler, this
will allow cleanup in the bcma code.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8234/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is some general cleanup as well as preparing sprom.c to become a
standalone driver. We will need this for bcm53xx ARM arch support.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8232/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This drops ssb/bcma dependency and will allow us to make it a standalone
driver.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/8233/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This makes NVRAM code less bcm47xx/ssb specific allowing it to become a
standalone driver in the future. A similar patch for bcma will follow
when it's ready.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7612/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We should be using ioremap_nocache helper which handles remaps in a
smarter way.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: http://patchwork.linux-mips.org/patch/7611/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>