提交 7177efc5 编写于 作者: R Rafał Miłecki 提交者: Ralf Baechle

MIPS: BCM47XX: Make bcma init NVRAM instead of bcm47xx polling it

This drops ssb/bcma dependency and will allow us to make it a standalone
driver.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/8233/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 21400f25
......@@ -121,48 +121,10 @@ int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
return err;
}
#ifdef CONFIG_BCM47XX_BCMA
static int nvram_init_bcma(void)
{
struct bcma_drv_cc *cc = &bcm47xx_bus.bcma.bus.drv_cc;
u32 base;
u32 lim;
#ifdef CONFIG_BCMA_NFLASH
if (cc->nflash.boot) {
base = BCMA_SOC_FLASH1;
lim = BCMA_SOC_FLASH1_SZ;
} else
#endif
if (cc->pflash.present) {
base = cc->pflash.window;
lim = cc->pflash.window_size;
#ifdef CONFIG_BCMA_SFLASH
} else if (cc->sflash.present) {
base = cc->sflash.window;
lim = cc->sflash.size;
#endif
} else {
pr_err("Couldn't find supported flash memory\n");
return -ENXIO;
}
return bcm47xx_nvram_init_from_mem(base, lim);
}
#endif
static int nvram_init(void)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
return nvram_init_bcma();
#endif
}
/* TODO: Look for MTD "nvram" partition */
return -ENXIO;
}
......
......@@ -20,6 +20,9 @@
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/time.h>
#ifdef CONFIG_BCM47XX
#include <bcm47xx_nvram.h>
#endif
enum bcma_boot_dev {
BCMA_BOOT_DEV_UNK = 0,
......@@ -323,10 +326,16 @@ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
switch (boot_dev) {
case BCMA_BOOT_DEV_PARALLEL:
case BCMA_BOOT_DEV_SERIAL:
/* TODO: Init NVRAM using BCMA_SOC_FLASH2 window */
#ifdef CONFIG_BCM47XX
bcm47xx_nvram_init_from_mem(BCMA_SOC_FLASH2,
BCMA_SOC_FLASH2_SZ);
#endif
break;
case BCMA_BOOT_DEV_NAND:
/* TODO: Init NVRAM using BCMA_SOC_FLASH1 window */
#ifdef CONFIG_BCM47XX
bcm47xx_nvram_init_from_mem(BCMA_SOC_FLASH1,
BCMA_SOC_FLASH1_SZ);
#endif
break;
default:
break;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册