- 21 3月, 2013 1 次提交
-
-
由 Alan Stern 提交于
This patch (as1670) fixes a regression caused by commit 6402c796 (USB: EHCI: work around silicon bug in Intel's EHCI controllers). The workaround goes through two IAA cycles for each QH being unlinked. During the first cycle, the QH is not added to the async_iaa list (because it isn't fully gone from the hardware yet), which means that list will be empty. Unfortunately, I forgot to update the IAA watchdog timer routine. It thinks that an empty async_iaa list means the timer expiration was an error, which isn't true any more. This problem didn't show up during initial testing because the controllers being tested all had working IAA interrupts. But not all controllers do, and when the watchdog timer expires, the empty-list check prevents the second IAA cycle from starting. As a result, URB unlinks never complete. The check needs to be removed. Among the symptoms of the regression are processes stuck in D wait states and hangs during system shutdown. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: NStephen Warren <swarren@wwwdotorg.org> Reported-and-tested-by: NSven Joachim <svenjoac@gmx.de> Reported-by: NAndreas Bombe <aeb@debian.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 19 3月, 2013 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Merge tag 'for-usb-linus-2013-03-18' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus Sarah writes: xHCI bug fix for 3.9 Hi Greg, Here's one xHCI bug fix. We had two register bits flipped. Sarah Sharp
-
- 18 3月, 2013 1 次提交
-
-
由 Dmitry Torokhov 提交于
According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1 of IMAN register. Previously their definitions were reversed. Even though there are no ill effects being observed from the swapped definitions (because IMAN_IP is RW1C and in legacy PCI case we come in with it already set to 1 so it was clearing itself even though we were setting IMAN_IE instead of IMAN_IP), we should still correct the values. This patch should be backported to kernels as old as 2.6.36, that contain the commit 4e833c0b "xhci: don't re-enable IE constantly". Signed-off-by: NDmitry Torokhov <dtor@vmware.com> Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
-
- 16 3月, 2013 4 次提交
-
-
由 Alan Stern 提交于
This patch (as1663) fixes a regression caused by commit 6e0c3339 (USB: EHCI: unlink one async QH at a time). In order to avoid keeping multiple QHs in an unusable intermediate state, that commit changed unlink_empty_async() so that it unlinks only one empty QH at a time. However, when the EHCI root hub is suspended, _all_ async QHs need to be unlinked. ehci_bus_suspend() used to do this by calling unlink_empty_async(), but now this only unlinks one of the QHs, not all of them. The symptom is that when the root hub is resumed, USB communications don't work for some period of time. This is because ehci-hcd doesn't realize it needs to restart the async schedule; it assumes that because some QHs are already on the schedule, the schedule must be running. The easiest way to fix the problem is add a new function that unlinks all the async QHs when the root hub is suspended. This patch should be applied to all kernels that have the 6e0c3339 commit. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: NAdrian Bassett <adrian.bassett@hotmail.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dmitry Artamonow 提交于
Device stucks on filesystem writes, unless following quirk is passed: echo 04e8:5136:m > /sys/module/usb_storage/parameters/quirks Add corresponding entry to unusual_devs.h Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hannes Reinecke 提交于
xhci has its own interrupt enabling routine, which will try to use MSI-X/MSI if present. So the usb core shouldn't try to enable legacy interrupts; on some machines the xhci legacy IRQ setting is invalid. v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn) Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Frederik Himpe <fhimpe@vub.ac.be> Cc: David Haerdeman <david@hardeman.nu> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Reviewed-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NHannes Reinecke <hare@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Stephane Eranian 提交于
This patch fixes a kernel crash when using precise sampling (PEBS) after a suspend/resume. Turns out the CPU notifier code is not invoked on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly by the kernel and keeps it power-on/resume value of 0 causing any PEBS measurement to crash when running on CPU0. The workaround is to add a hook in the actual resume code to restore the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0, the DS_AREA will be restored twice but this is harmless. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 3月, 2013 4 次提交
-
-
由 Michel Lespinasse 提交于
The vm_flags introduced in 6d7825b1 ("mm/fremap.c: fix oops on error path") is supposed to avoid a compiler warning about unitialized vm_flags without changing the generated code. However I am concerned that this is going to be very brittle, and fail with some compiler versions. The failure could be either of: - compiler could actually load vma->vm_flags before checking for the !vma condition, thus reintroducing the oops - compiler could optimize out the !vma check, since the pointer just got dereferenced shortly before (so the compiler knows it can't be NULL!) I propose reversing this part of the change and initializing vm_flags to 0 just to avoid the bogus uninitialized use warning. Signed-off-by: NMichel Lespinasse <walken@google.com> Cc: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu由 Linus Torvalds 提交于
Pull fix for hlist_entry_safe() regression from Paul McKenney: "This contains a single commit that fixes a regression in hlist_entry_safe(). This macro references its argument twice, which can cause NULL-pointer errors. This commit applies a gcc statement expression, creating a temporary variable to avoid the double reference. This has been posted to LKML at https://lkml.org/lkml/2013/3/9/75. Kudos to CAI Qian, whose testing uncovered this, to Eric Dumazet, who spotted root cause, and to Li Zefan, who tested this commit." * 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: list: Fix double fetch of pointer in hlist_entry_safe()
-
由 Paul E. McKenney 提交于
The current version of hlist_entry_safe() fetches the pointer twice, once to test for NULL and the other to compute the offset back to the enclosing structure. This is OK for normal lock-based use because in that case, the pointer cannot change. However, when the pointer is protected by RCU (as in "rcu_dereference(p)"), then the pointer can change at any time. This use case can result in the following sequence of events: 1. CPU 0 invokes hlist_entry_safe(), fetches the RCU-protected pointer as sees that it is non-NULL. 2. CPU 1 invokes hlist_del_rcu(), deleting the entry that CPU 0 just fetched a pointer to. Because this is the last entry in the list, the pointer fetched by CPU 0 is now NULL. 3. CPU 0 refetches the pointer, obtains NULL, and then gets a NULL-pointer crash. This commit therefore applies gcc's "({ })" statement expression to create a temporary variable so that the specified pointer is fetched only once, avoiding the above sequence of events. Please note that it is the caller's responsibility to use rcu_dereference() as needed. This allows RCU-protected uses to work correctly without imposing any additional overhead on the non-RCU case. Many thanks to Eric Dumazet for spotting root cause! Reported-by: NCAI Qian <caiqian@redhat.com> Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: NLi Zefan <lizefan@huawei.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull ext2, ext3, reiserfs, quota fixes from Jan Kara: "A fix for regression in ext2, and a format string issue in ext3. The rest isn't too serious." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: Fix BUG_ON in evict() on inode deletion reiserfs: Use kstrdup instead of kmalloc/strcpy ext3: Fix format string issues quota: add missing use of dq_data_lock in __dquot_initialize
-
- 14 3月, 2013 25 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace由 Linus Torvalds 提交于
Pull namespace bugfixes from Eric Biederman: "This tree includes a partial revert for "fs: Limit sys_mount to only request filesystem modules." When I added the new style module aliases to the filesystems I deleted the old ones. A bad move. It turns out that distributions like Arch linux use module aliases when constructing ramdisks. Which meant ultimately that an ext3 filesystem mounted with ext4 would not result in the ext4 module being put into the ramdisk. The other change in this tree adds a handful of filesystem module alias I simply failed to add the first time. Which inconvinienced a few folks using cifs. I don't want to inconvinience folks any longer than I have to so here are these trivial fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: fs: Readd the fs module aliases. fs: Limit sys_mount to only request filesystem modules. (Part 3)
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: - A bunch of fixes - Finish off the idr API conversions before someone starts to use the old interfaces again. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: idr: idr_alloc() shouldn't trigger lowmem warning when preloaded UAPI: fix endianness conditionals in M32R's asm/stat.h UAPI: fix endianness conditionals in linux/raid/md_p.h UAPI: fix endianness conditionals in linux/acct.h UAPI: fix endianness conditionals in linux/aio_abi.h decompressors: fix typo "POWERPC" mm/fremap.c: fix oops on error path idr: deprecate idr_pre_get() and idr_get_new[_above]() tidspbridge: convert to idr_alloc() zcache: convert to idr_alloc() mlx4: remove leftover idr_pre_get() call workqueue: convert to idr_alloc() nfsd: convert to idr_alloc() nfsd: remove unused get_new_stid() kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER signal: always clear sa_restorer on execve mm: remove_memory(): fix end_pfn setting include/linux/res_counter.h needs errno.h
-
由 Tejun Heo 提交于
GFP_NOIO is often used for idr_alloc() inside preloaded section as the allocation mask doesn't really matter. If the idr tree needs to be expanded, idr_alloc() first tries to allocate using the specified allocation mask and if it fails falls back to the preloaded buffer. This order prevent non-preloading idr_alloc() users from taking advantage of preloading ones by using preload buffer without filling it shifting the burden of allocation to the preload users. Unfortunately, this allowed/expected-to-fail kmem_cache allocation ends up generating spurious slab lowmem warning before succeeding the request from the preload buffer. This patch makes idr_layer_alloc() add __GFP_NOWARN to the first kmem_cache attempt and try kmem_cache again w/o __GFP_NOWARN after allocation from preload_buffer fails so that lowmem warning is generated if not suppressed by the original @gfp_mask. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NDavid Teigland <teigland@redhat.com> Tested-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be compared against __BYTE_ORDER in preprocessor conditionals where these are exposed to userspace (that is they're not inside __KERNEL__ conditionals). However, in the main kernel the norm is to check for "defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and this has incorrectly leaked into the userspace headers. The definition of struct stat64 in M32R's asm/stat.h is wrong in this way. Note that userspace will likely interpret the field order incorrectly as the big-endian variant on little-endian machines - depending on header inclusion order. [!!!] NOTE [!!!] This patch may adversely change the userspace API. It might be better to fix the ordering of st_blocks and __pad4 in struct stat64. Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be compared against __BYTE_ORDER in preprocessor conditionals where these are exposed to userspace (that is they're not inside __KERNEL__ conditionals). However, in the main kernel the norm is to check for "defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and this has incorrectly leaked into the userspace headers. The definition of struct mdp_superblock_s in linux/raid/md_p.h is wrong in this way. Note that userspace will likely interpret the ordering of the fields incorrectly as the big-endian variant on a little-endian machines - depending on header inclusion order. [!!!] NOTE [!!!] This patch may adversely change the userspace API. It might be better to fix the ordering of events_hi, events_lo, cp_events_hi and cp_events_lo in struct mdp_superblock_s / typedef mdp_super_t. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NNeilBrown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be compared against __BYTE_ORDER in preprocessor conditionals where these are exposed to userspace (that is they're not inside __KERNEL__ conditionals). However, in the main kernel the norm is to check for "defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and this has incorrectly leaked into the userspace headers. The definition of ACCT_BYTEORDER in linux/acct.h is wrong in this way. Note that userspace will likely interpret this incorrectly as the big-endian variant on little-endian machines - depending on header inclusion order. [!!!] NOTE [!!!] This patch may adversely change the userspace API. It might be better to fix the value of ACCT_BYTEORDER. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
In the UAPI header files, __BIG_ENDIAN and __LITTLE_ENDIAN must be compared against __BYTE_ORDER in preprocessor conditionals where these are exposed to userspace (that is they're not inside __KERNEL__ conditionals). However, in the main kernel the norm is to check for "defined(__XXX_ENDIAN)" rather than comparing against __BYTE_ORDER and this has incorrectly leaked into the userspace headers. The definition of PADDED() in linux/aio_abi.h is wrong in this way. Note that userspace will likely interpret this and thus the order of fields in struct iocb incorrectly as the little-endian variant on big-endian machines - depending on header inclusion order. [!!!] NOTE [!!!] This patch may adversely change the userspace API. It might be better to fix the ordering of aio_key and aio_reserved1 in struct iocb. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NBenjamin LaHaise <bcrl@kvack.org> Acked-by: NJeff Moyer <jmoyer@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Bolle 提交于
Commit 5dc49c75 ("decompressors: make the default XZ_DEC_* config match the selected architecture") added default y if POWERPC to lib/xz/Kconfig. But there is no Kconfig symbol POWERPC. The most general Kconfig symbol for the powerpc architecture is PPC. So let's use that. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Cc: Florian Fainelli <florian@openwrt.org> Cc: Lasse Collin <lasse.collin@tukaani.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
If find_vma() fails, sys_remap_file_pages() will dereference `vma', which contains NULL. Fix it by checking the pointer. (We could alternatively check for err==0, but this seems more direct) (The vm_flags change is to squish a bogus used-uninitialised warning without adding extra code). Reported-by: NTommi Rantala <tt.rantala@gmail.com> Cc: Michel Lespinasse <walken@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Now that all in-kernel users are converted to ues the new alloc interface, mark the old interface deprecated. We should be able to remove these in a few releases. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
idr_get_new*() and friends are about to be deprecated. Convert to the new idr_alloc() interface. There are some peculiarities and possible bugs in the converted functions. This patch preserves those. * drv_insert_node_res_element() returns -ENOMEM on alloc failure, -EFAULT if id space is exhausted. -EFAULT is at best misleading. * drv_proc_insert_strm_res_element() is even weirder. It returns -EFAULT if kzalloc() fails, -ENOMEM if idr preloading fails and -EPERM if id space is exhausted. What's going on here? * drv_proc_insert_strm_res_element() doesn't free *pstrm_res after failure. Only compile tested. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Víctor Manuel Jáquez Leal <vjaquez@igalia.com> Cc: Rene Sapiens <rene.sapiens@ti.com> Cc: Armando Uribe <x0095078@ti.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
idr_get_new*() and friends are about to be deprecated. Convert to the new idr_alloc() interface. Only compile tested. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Commit 6a920060 ("IB/mlx4: convert to idr_alloc()") forgot to remove idr_pre_get() call in mlx4_ib_cm_paravirt_init(). It's unnecessary and idr_pre_get() will soon be deprecated. Remove it. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
idr_get_new*() and friends are about to be deprecated. Convert to the new idr_alloc() interface. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
idr_get_new*() and friends are about to be deprecated. Convert to the new idr_alloc() interface. Only compile-tested. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NJ. Bruce Fields <bfields@redhat.com> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
get_new_stid() is no longer used since commit 3abdb607 ("nfsd4: simplify idr allocation"). Remove it. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
__ARCH_HAS_SA_RESTORER is the preferred conditional for use in 3.9 and later kernels, per Kees. Cc: Emese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
When the new signal handlers are set up, the location of sa_restorer is not cleared, leaking a parent process's address space location to children. This allows for a potential bypass of the parent's ASLR by examining the sa_restorer value returned when calling sigaction(). Based on what should be considered "secret" about addresses, it only matters across the exec not the fork (since the VMAs haven't changed until the exec). But since exec sets SIG_DFL and keeps sa_restorer, this is where it should be fixed. Given the few uses of sa_restorer, a "set" function was not written since this would be the only use. Instead, we use __ARCH_HAS_SA_RESTORER, as already done in other places. Example of the leak before applying this patch: $ cat /proc/$$/maps ... 7fb9f3083000-7fb9f3238000 r-xp 00000000 fd:01 404469 .../libc-2.15.so ... $ ./leak ... 7f278bc74000-7f278be29000 r-xp 00000000 fd:01 404469 .../libc-2.15.so ... 1 0 (nil) 0x7fb9f30b94a0 2 4000000 (nil) 0x7f278bcaa4a0 3 4000000 (nil) 0x7f278bcaa4a0 4 0 (nil) 0x7fb9f30b94a0 ... [akpm@linux-foundation.org: use SA_RESTORER for backportability] Signed-off-by: NKees Cook <keescook@chromium.org> Reported-by: NEmese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Toshi Kani 提交于
remove_memory() calls walk_memory_range() with [start_pfn, end_pfn), where end_pfn is exclusive in this range. Therefore, end_pfn needs to be set to the next page of the end address. Signed-off-by: NToshi Kani <toshi.kani@hp.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
alpha allmodconfig: In file included from mm/memcontrol.c:28: include/linux/res_counter.h: In function 'res_counter_set_limit': include/linux/res_counter.h:203: error: 'EBUSY' undeclared (first use in this function) include/linux/res_counter.h:203: error: (Each undeclared identifier is reported only once include/linux/res_counter.h:203: error: for each function it appears in.) Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Tejun Heo <tj@kernel.org> Cc: Frederic Weisbecker <fweisbec@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg Kroah-Hartman: "Here are a number of tiny USB fixes and new USB device ids for your 3.9 tree. The "largest" one here is a revert of a usb-storage patch that turned out to be incorrect, breaking existing users, which is never a good thing. Everything else is pretty simple and small" * tag 'usb-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits) USB: quatech2: only write to the tty if the port is open. qcserial: bind to DM/DIAG port on Gobi 1K devices USB: cdc-wdm: fix buffer overflow usb: serial: Add Rigblaster Advantage to device table qcaux: add Franklin U600 usb: musb: core: fix possible build error with randconfig usb: cp210x new Vendor/Device IDs usb: gadget: pxa25x: fix disconnect reporting usb: dwc3: ep0: fix sparc64 build usb: c67x00 RetryCnt value in c67x00 TD should be 3 usb: Correction to c67x00 TD data length mask usb: Makefile: fix drivers/usb/phy/ Makefile entry USB: added support for Cinterion's products AH6 and PLS8 usb: gadget: fix omap_udc build errors USB: storage: fix Huawei mode switching regression USB: storage: in-kernel modeswitching is deprecated tools: usb: ffs-test: Fix build failure USB: option: add Huawei E5331 usb: musb: omap2430: fix sparse warning usb: musb: omap2430: fix omap_musb_mailbox glue check again ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg Kroah-Hartman: "Here are some tty/serial driver fixes for 3.9 We finally mute the annoying WARN_ON that lots of people are hitting and it turns out isn't needed anymore. Also add a few new device ids and a some other minor fixes." * tag 'tty-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: fix typo "SERIAL_S3C2412" serial: 8250: Keep 8250.<xxxx> module options functional after driver rename tty: serial: fix typo "ARCH_S5P6450" tty/8250_pnp: serial port detection regression since v3.7 serial: bcm63xx_uart: fix compilation after "TTY: switch tty_insert_flip_char" serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller Fix 4 port and add support for 8 port 'Unknown' PCI serial port cards tty/serial: Add support for Altera serial port tty: serial: vt8500: Unneccessary duplicated clock code removed tty: serial: mpc5xxx: fix PSC clock name bug TTY: disable debugging warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging tree fixes from Greg Kroah-Hartman: "Here are some drivers/staging and drivers/iio fixes for 3.9 (the two are still pretty intertwined, hence them coming both from my tree still.) Nothing major, just a few things that have been reported by users, all of these have been in linux-next for a while." * tag 'staging-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: dt9812: use CR_CHAN() for channel number staging/vt6656: Fix too large integer constant warning on 32-bit staging: comedi: drivers: usbduxsigma.c: fix DMA buffers on stack staging: imx/drm: request irq only after adding the crtc staging: comedi: drivers: usbduxfast.c: fix for DMA buffers on stack staging: comedi: drivers: usbdux.c: fix DMA buffers on stack staging: vt6656: Fix oops on resume from suspend. iio:common:st_sensors fixed all warning messages about uninitialized variables iio: Fix build error seen if IIO_TRIGGER is defined but IIO_BUFFER is not iio/imu: inv_mpu6050 depends on IIO_BUFFER iio:ad5064: Initialize register cache correctly iio:ad5064: Fix off by one in DAC value range check iio:ad5064: Fix address of the second channel for ad5065/ad5045/ad5025
-
由 Eric W. Biederman 提交于
Don't allowing sharing the root directory with processes in a different user namespace. There doesn't seem to be any point, and to allow it would require the overhead of putting a user namespace reference in fs_struct (for permission checks) and incrementing that reference count on practically every call to fork. So just perform the inexpensive test of forbidding sharing fs_struct acrosss processes in different user namespaces. We already disallow other forms of threading when unsharing a user namespace so this should be no real burden in practice. This updates setns, clone, and unshare to disallow multiple user namespaces sharing an fs_struct. Cc: stable@vger.kernel.org Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bill Pemberton 提交于
The commit 2e124b4a removed the checks that prevented qt2_process_read_urb() from trying to put chars into ttys that weren't actually opened. This resulted in 'tty is NULL' warnings from flush_to_ldisc() when the device was used. The devices use just one read urb for all ports. As a result qt2_process_read_urb() may be called with the current port set to a port number that has not been opened. Add a check if the port is open before calling tty_flip_buffer_push(). Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 13 3月, 2013 4 次提交
-
-
由 Dan Williams 提交于
Turns out we just need altsetting 1 and then we can talk to it. Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jan Kara 提交于
Commit 8e3dffc6 introduced a regression where deleting inode with large extended attributes leads to triggering BUG_ON(inode->i_state != (I_FREEING | I_CLEAR)) in fs/inode.c:evict(). That happens because freeing of xattr block dirtied the inode and it happened after clear_inode() has been called. Fix the issue by moving removal of xattr block into ext2_evict_inode() before clear_inode() call close to a place where data blocks are truncated. That is also more logical place and removes surprising requirement that ext2_free_blocks() mustn't dirty the inode. Reported-by: NTyler Hicks <tyhicks@canonical.com> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Randy Dunlap 提交于
Fix kernel-doc warning in futex.c and convert 'Returns' to the new Return: kernel-doc notation format. Warning(kernel/futex.c:2286): Excess function parameter 'clockrt' description in 'futex_wait_requeue_pi' Fix one spello. Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix new kernel-doc warnings in kernel/signal.c: Warning(kernel/signal.c:2689): No description found for parameter 'uset' Warning(kernel/signal.c:2689): Excess function parameter 'set' description in 'sys_rt_sigpending' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-