Merge tag 'usb-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of tiny USB fixes and new USB device ids for your
  3.9 tree.

  The "largest" one here is a revert of a usb-storage patch that turned
  out to be incorrect, breaking existing users, which is never a good
  thing.  Everything else is pretty simple and small"

* tag 'usb-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits)
  USB: quatech2: only write to the tty if the port is open.
  qcserial: bind to DM/DIAG port on Gobi 1K devices
  USB: cdc-wdm: fix buffer overflow
  usb: serial: Add Rigblaster Advantage to device table
  qcaux: add Franklin U600
  usb: musb: core: fix possible build error with randconfig
  usb: cp210x new Vendor/Device IDs
  usb: gadget: pxa25x: fix disconnect reporting
  usb: dwc3: ep0: fix sparc64 build
  usb: c67x00 RetryCnt value in c67x00 TD should be 3
  usb: Correction to c67x00 TD data length mask
  usb: Makefile: fix drivers/usb/phy/ Makefile entry
  USB: added support for Cinterion's products AH6 and PLS8
  usb: gadget: fix omap_udc build errors
  USB: storage: fix Huawei mode switching regression
  USB: storage: in-kernel modeswitching is deprecated
  tools: usb: ffs-test: Fix build failure
  USB: option: add Huawei E5331
  usb: musb: omap2430: fix sparse warning
  usb: musb: omap2430: fix omap_musb_mailbox glue check again
  ...

drivers/usb/Makefile

@@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
-obj-$(CONFIG_USB_COMMON)	+= phy/
+obj-$(CONFIG_USB_OTG_UTILS)	+= phy/
 obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/

drivers/usb/c67x00/c67x00-sched.c

@@ -100,7 +100,7 @@ struct c67x00_urb_priv {
 #define TD_PIDEP_OFFSET		0x04
 #define TD_PIDEPMASK_PID	0xF0
 #define TD_PIDEPMASK_EP		0x0F
-#define TD_PORTLENMASK_DL	0x02FF
+#define TD_PORTLENMASK_DL	0x03FF
 #define TD_PORTLENMASK_PN	0xC000
 
 #define TD_STATUS_OFFSET	0x07
@@ -590,7 +590,7 @@ static int c67x00_create_td(struct c67x00_hcd *c67x00, struct urb *urb,
 {
 	struct c67x00_td *td;
 	struct c67x00_urb_priv *urbp = urb->hcpriv;
-	const __u8 active_flag = 1, retry_cnt = 1;
+	const __u8 active_flag = 1, retry_cnt = 3;
 	__u8 cmd = 0;
 	int tt = 0;
 

drivers/usb/chipidea/udc.c

@@ -1767,7 +1767,7 @@ static int udc_start(struct ci13xxx *ci)
 		goto put_transceiver;
 	}
 
-	retval = dbg_create_files(&ci->gadget.dev);
+	retval = dbg_create_files(ci->dev);
 	if (retval)
 		goto unreg_device;
 
@@ -1796,7 +1796,7 @@ static int udc_start(struct ci13xxx *ci)
 
 	dev_err(dev, "error = %i\n", retval);
 remove_dbg:
-	dbg_remove_files(&ci->gadget.dev);
+	dbg_remove_files(ci->dev);
 unreg_device:
 	device_unregister(&ci->gadget.dev);
 put_transceiver:
@@ -1836,7 +1836,7 @@ static void udc_stop(struct ci13xxx *ci)
 		if (ci->global_phy)
 			usb_put_phy(ci->transceiver);
 	}
-	dbg_remove_files(&ci->gadget.dev);
+	dbg_remove_files(ci->dev);
 	device_unregister(&ci->gadget.dev);
 	/* my kobject is dynamic, I swear! */
 	memset(&ci->gadget, 0, sizeof(ci->gadget));

drivers/usb/class/cdc-wdm.c

@@ -56,6 +56,7 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 #define WDM_RESPONDING		7
 #define WDM_SUSPENDING		8
 #define WDM_RESETTING		9
+#define WDM_OVERFLOW		10
 
 #define WDM_MAX			16
 
@@ -155,6 +156,7 @@ static void wdm_in_callback(struct urb *urb)
 {
 	struct wdm_device *desc = urb->context;
 	int status = urb->status;
+	int length = urb->actual_length;
 
 	spin_lock(&desc->iuspin);
 	clear_bit(WDM_RESPONDING, &desc->flags);
@@ -185,9 +187,17 @@ static void wdm_in_callback(struct urb *urb)
 	}
 
 	desc->rerr = status;
-	desc->reslength = urb->actual_length;
-	memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength);
-	desc->length += desc->reslength;
+	if (length + desc->length > desc->wMaxCommand) {
+		/* The buffer would overflow */
+		set_bit(WDM_OVERFLOW, &desc->flags);
+	} else {
+		/* we may already be in overflow */
+		if (!test_bit(WDM_OVERFLOW, &desc->flags)) {
+			memmove(desc->ubuf + desc->length, desc->inbuf, length);
+			desc->length += length;
+			desc->reslength = length;
+		}
+	}
 skip_error:
 	wake_up(&desc->wait);
 
@@ -435,6 +445,11 @@ static ssize_t wdm_read
 			rv = -ENODEV;
 			goto err;
 		}
+		if (test_bit(WDM_OVERFLOW, &desc->flags)) {
+			clear_bit(WDM_OVERFLOW, &desc->flags);
+			rv = -ENOBUFS;
+			goto err;
+		}
 		i++;
 		if (file->f_flags & O_NONBLOCK) {
 			if (!test_bit(WDM_READ, &desc->flags)) {
@@ -478,6 +493,7 @@ static ssize_t wdm_read
 			spin_unlock_irq(&desc->iuspin);
 			goto retry;
 		}
+
 		if (!desc->reslength) { /* zero length read */
 			dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
 			clear_bit(WDM_READ, &desc->flags);
@@ -1004,6 +1020,7 @@ static int wdm_post_reset(struct usb_interface *intf)
 	struct wdm_device *desc = wdm_find_device(intf);
 	int rv;
 
+	clear_bit(WDM_OVERFLOW, &desc->flags);
 	clear_bit(WDM_RESETTING, &desc->flags);
 	rv = recover_from_urb_loss(desc);
 	mutex_unlock(&desc->wlock);

drivers/usb/dwc3/core.c

@@ -583,6 +583,7 @@ static int dwc3_remove(struct platform_device *pdev)
 		break;
 	}
 
+	dwc3_free_event_buffers(dwc);
 	dwc3_core_exit(dwc);
 
 	return 0;

drivers/usb/dwc3/dwc3-exynos.c

@@ -23,8 +23,6 @@
 #include <linux/usb/nop-usb-xceiv.h>
 #include <linux/of.h>
 
-#include "core.h"
-
 struct dwc3_exynos {
 	struct platform_device	*dwc3;
 	struct platform_device	*usb2_phy;

drivers/usb/dwc3/dwc3-omap.c

@@ -54,8 +54,6 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/nop-usb-xceiv.h>
 
-#include "core.h"
-
 /*
  * All these registers belong to OMAP's Wrapper around the
  * DesignWare USB3 Core.
@@ -465,20 +463,20 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id of_dwc3_matach[] = {
+static const struct of_device_id of_dwc3_match[] = {
 	{
 		"ti,dwc3",
 	},
 	{ },
 };
-MODULE_DEVICE_TABLE(of, of_dwc3_matach);
+MODULE_DEVICE_TABLE(of, of_dwc3_match);
 
 static struct platform_driver dwc3_omap_driver = {
 	.probe		= dwc3_omap_probe,
 	.remove		= dwc3_omap_remove,
 	.driver		= {
 		.name	= "omap-dwc3",
-		.of_match_table	= of_dwc3_matach,
+		.of_match_table	= of_dwc3_match,
 	},
 };
 

drivers/usb/dwc3/dwc3-pci.c

@@ -45,8 +45,6 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/nop-usb-xceiv.h>
 
-#include "core.h"
-
 /* FIXME define these in <linux/pci_ids.h> */
 #define PCI_VENDOR_ID_SYNOPSYS		0x16c3
 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3	0xabcd

drivers/usb/dwc3/ep0.c

@@ -891,7 +891,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 				DWC3_TRBCTL_CONTROL_DATA);
 	} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
 			&& (dep->number == 0)) {
-		u32		transfer_size;
+		u32	transfer_size;
+		u32	maxpacket;
 
 		ret = usb_gadget_map_request(&dwc->gadget, &req->request,
 				dep->number);
@@ -902,8 +903,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 
 		WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE);
 
-		transfer_size = roundup(req->request.length,
-				(u32) dep->endpoint.maxpacket);
+		maxpacket = dep->endpoint.maxpacket;
+		transfer_size = roundup(req->request.length, maxpacket);
 
 		dwc->ep0_bounced = true;
 

drivers/usb/dwc3/gadget.c

@@ -2159,7 +2159,6 @@ static void dwc3_gadget_phy_suspend(struct dwc3 *dwc, u8 speed)
 
 static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 {
-	struct dwc3_gadget_ep_cmd_params params;
 	struct dwc3_ep		*dep;
 	int			ret;
 	u32			reg;
@@ -2167,8 +2166,6 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 
 	dev_vdbg(dwc->dev, "%s\n", __func__);
 
-	memset(&params, 0x00, sizeof(params));
-
 	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 	speed = reg & DWC3_DSTS_CONNECTSPD;
 	dwc->speed = speed;

drivers/usb/gadget/Makefile

@@ -35,6 +35,12 @@ mv_udc-y			:= mv_udc_core.o
 obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
 obj-$(CONFIG_USB_MV_U3D)	+= mv_u3d_core.o
 
+# USB Functions
+obj-$(CONFIG_USB_F_ACM)		+= f_acm.o
+f_ss_lb-y			:= f_loopback.o f_sourcesink.o
+obj-$(CONFIG_USB_F_SS_LB)	+= f_ss_lb.o
+obj-$(CONFIG_USB_U_SERIAL)	+= u_serial.o
+
 #
 # USB gadget drivers
 #
@@ -74,9 +80,3 @@ obj-$(CONFIG_USB_G_WEBCAM)	+= g_webcam.o
 obj-$(CONFIG_USB_G_NCM)		+= g_ncm.o
 obj-$(CONFIG_USB_G_ACM_MS)	+= g_acm_ms.o
 obj-$(CONFIG_USB_GADGET_TARGET)	+= tcm_usb_gadget.o
-
-# USB Functions
-obj-$(CONFIG_USB_F_ACM)		+= f_acm.o
-f_ss_lb-y			:= f_loopback.o f_sourcesink.o
-obj-$(CONFIG_USB_F_SS_LB)	+= f_ss_lb.o
-obj-$(CONFIG_USB_U_SERIAL)	+= u_serial.o

drivers/usb/gadget/composite.c

@@ -1757,10 +1757,7 @@ static const struct usb_gadget_driver composite_driver_template = {
 /**
  * usb_composite_probe() - register a composite driver
  * @driver: the driver to register
- * @bind: the callback used to allocate resources that are shared across the
- *	whole device, such as string IDs, and add its configurations using
- *	@usb_add_config().  This may fail by returning a negative errno
- *	value; it should return zero on successful initialization.
+ *
  * Context: single threaded during gadget setup
  *
  * This function is used to register drivers using the composite driver

drivers/usb/gadget/f_uac1.c

@@ -418,6 +418,7 @@ static int audio_get_intf_req(struct usb_function *f,
 
 	req->context = audio;
 	req->complete = f_audio_complete;
+	len = min_t(size_t, sizeof(value), len);
 	memcpy(req->buf, &value, len);
 
 	return len;

drivers/usb/gadget/imx_udc.c

@@ -1334,27 +1334,18 @@ static int imx_udc_start(struct usb_gadget *gadget,
 		struct usb_gadget_driver *driver)
 {
 	struct imx_udc_struct *imx_usb;
-	int retval;
 
 	imx_usb = container_of(gadget, struct imx_udc_struct, gadget);
 	/* first hook up the driver ... */
 	imx_usb->driver = driver;
 	imx_usb->gadget.dev.driver = &driver->driver;
 
-	retval = device_add(&imx_usb->gadget.dev);
-	if (retval)
-		goto fail;
-
 	D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n",
 		__func__, driver->driver.name);
 
 	imx_udc_enable(imx_usb);
 
 	return 0;
-fail:
-	imx_usb->driver = NULL;
-	imx_usb->gadget.dev.driver = NULL;
-	return retval;
 }
 
 static int imx_udc_stop(struct usb_gadget *gadget,
@@ -1370,8 +1361,6 @@ static int imx_udc_stop(struct usb_gadget *gadget,
 	imx_usb->gadget.dev.driver = NULL;
 	imx_usb->driver = NULL;
 
-	device_del(&imx_usb->gadget.dev);
-
 	D_INI(imx_usb->dev, "<%s> unregistered gadget driver '%s'\n",
 		__func__, driver->driver.name);
 
@@ -1477,6 +1466,10 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 	imx_usb->gadget.dev.parent = &pdev->dev;
 	imx_usb->gadget.dev.dma_mask = pdev->dev.dma_mask;
 
+	ret = device_add(&imx_usb->gadget.dev);
+	if (retval)
+		goto fail4;
+
 	platform_set_drvdata(pdev, imx_usb);
 
 	usb_init_data(imx_usb);
@@ -1488,9 +1481,11 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 
 	ret = usb_add_gadget_udc(&pdev->dev, &imx_usb->gadget);
 	if (ret)
-		goto fail4;
+		goto fail5;
 
 	return 0;
+fail5:
+	device_unregister(&imx_usb->gadget.dev);
 fail4:
 	for (i = 0; i < IMX_USB_NB_EP + 1; i++)
 		free_irq(imx_usb->usbd_int[i], imx_usb);
@@ -1514,6 +1509,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
 	int i;
 
 	usb_del_gadget_udc(&imx_usb->gadget);
+	device_unregister(&imx_usb->gadget.dev);
 	imx_udc_disable(imx_usb);
 	del_timer(&imx_usb->timer);
 

drivers/usb/gadget/omap_udc.c

@@ -62,6 +62,7 @@
 #define	DRIVER_VERSION	"4 October 2004"
 
 #define OMAP_DMA_USB_W2FC_TX0		29
+#define OMAP_DMA_USB_W2FC_RX0		26
 
 /*
  * The OMAP UDC needs _very_ early endpoint setup:  before enabling the
@@ -1310,7 +1311,7 @@ static int omap_pullup(struct usb_gadget *gadget, int is_on)
 }
 
 static int omap_udc_start(struct usb_gadget *g,
-		struct usb_gadget_driver *driver)
+		struct usb_gadget_driver *driver);
 static int omap_udc_stop(struct usb_gadget *g,
 		struct usb_gadget_driver *driver);
 

drivers/usb/gadget/pxa25x_udc.c

@@ -1266,13 +1266,6 @@ static int pxa25x_udc_start(struct usb_gadget *g,
 	dev->gadget.dev.driver = &driver->driver;
 	dev->pullup = 1;
 
-	retval = device_add (&dev->gadget.dev);
-	if (retval) {
-		dev->driver = NULL;
-		dev->gadget.dev.driver = NULL;
-		return retval;
-	}
-
 	/* ... then enable host detection and ep0; and we're ready
 	 * for set_configuration as well as eventual disconnect.
 	 */
@@ -1310,6 +1303,10 @@ stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver)
 	}
 	del_timer_sync(&dev->timer);
 
+	/* report disconnect; the driver is already quiesced */
+	if (driver)
+		driver->disconnect(&dev->gadget);
+
 	/* re-init driver-visible data structures */
 	udc_reinit(dev);
 }
@@ -1331,7 +1328,6 @@ static int pxa25x_udc_stop(struct usb_gadget*g,
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
-	device_del (&dev->gadget.dev);
 	dump_state(dev);
 
 	return 0;
@@ -2146,6 +2142,13 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	dev->gadget.dev.parent = &pdev->dev;
 	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
 
+	retval = device_add(&dev->gadget.dev);
+	if (retval) {
+		dev->driver = NULL;
+		dev->gadget.dev.driver = NULL;
+		goto err_device_add;
+	}
+
 	the_controller = dev;
 	platform_set_drvdata(pdev, dev);
 
@@ -2196,6 +2199,8 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	free_irq(irq, dev);
 #endif
  err_irq1:
+	device_unregister(&dev->gadget.dev);
+ err_device_add:
 	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
@@ -2217,10 +2222,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
 {
 	struct pxa25x_udc *dev = platform_get_drvdata(pdev);
 
-	usb_del_gadget_udc(&dev->gadget);
 	if (dev->driver)
 		return -EBUSY;
 
+	usb_del_gadget_udc(&dev->gadget);
+	device_unregister(&dev->gadget.dev);
 	dev->pullup = 0;
 	pullup(dev);
 

drivers/usb/gadget/pxa27x_udc.c

@@ -1814,11 +1814,6 @@ static int pxa27x_udc_start(struct usb_gadget *g,
 	udc->gadget.dev.driver = &driver->driver;
 	dplus_pullup(udc, 1);
 
-	retval = device_add(&udc->gadget.dev);
-	if (retval) {
-		dev_err(udc->dev, "device_add error %d\n", retval);
-		goto fail;
-	}
 	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		retval = otg_set_peripheral(udc->transceiver->otg,
 						&udc->gadget);
@@ -1876,7 +1871,6 @@ static int pxa27x_udc_stop(struct usb_gadget *g,
 
 	udc->driver = NULL;
 
-	device_del(&udc->gadget.dev);
 
 	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return otg_set_peripheral(udc->transceiver->otg, NULL);
@@ -2480,13 +2474,24 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 			driver_name, udc->irq, retval);
 		goto err_irq;
 	}
+
+	retval = device_add(&udc->gadget.dev);
+	if (retval) {
+		dev_err(udc->dev, "device_add error %d\n", retval);
+		goto err_dev_add;
+	}
+
 	retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
 	if (retval)
 		goto err_add_udc;
 
 	pxa_init_debugfs(udc);
+
 	return 0;
+
 err_add_udc:
+	device_unregister(&udc->gadget.dev);
+err_dev_add:
 	free_irq(udc->irq, udc);
 err_irq:
 	iounmap(udc->regs);
@@ -2507,6 +2512,7 @@ static int __exit pxa_udc_remove(struct platform_device *_dev)
 	int gpio = udc->mach->gpio_pullup;
 
 	usb_del_gadget_udc(&udc->gadget);
+	device_del(&udc->gadget.dev);
 	usb_gadget_unregister_driver(udc->driver);
 	free_irq(udc->irq, udc);
 	pxa_cleanup_debugfs(udc);

drivers/usb/gadget/s3c2410_udc.c

@@ -1668,8 +1668,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev)
 static int s3c2410_udc_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver)
 {
-	struct s3c2410_udc *udc = to_s3c2410(g)
-	int		retval;
+	struct s3c2410_udc *udc = to_s3c2410(g);
 
 	dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name);
 
@@ -1677,22 +1676,10 @@ static int s3c2410_udc_start(struct usb_gadget *g,
 	udc->driver = driver;
 	udc->gadget.dev.driver = &driver->driver;
 
-	/* Bind the driver */
-	retval = device_add(&udc->gadget.dev);
-	if (retval) {
-		dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
-		goto register_error;
-	}
-
 	/* Enable udc */
 	s3c2410_udc_enable(udc);
 
 	return 0;
-
-register_error:
-	udc->driver = NULL;
-	udc->gadget.dev.driver = NULL;
-	return retval;
 }
 
 static int s3c2410_udc_stop(struct usb_gadget *g,
@@ -1700,7 +1687,6 @@ static int s3c2410_udc_stop(struct usb_gadget *g,
 {
 	struct s3c2410_udc *udc = to_s3c2410(g);
 
-	device_del(&udc->gadget.dev);
 	udc->driver = NULL;
 
 	/* Disable udc */
@@ -1842,6 +1828,13 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 	udc->gadget.dev.parent = &pdev->dev;
 	udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
 
+	/* Bind the driver */
+	retval = device_add(&udc->gadget.dev);
+	if (retval) {
+		dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
+		goto err_device_add;
+	}
+
 	the_controller = udc;
 	platform_set_drvdata(pdev, udc);
 
@@ -1930,6 +1923,8 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 err_int:
 	free_irq(IRQ_USBD, udc);
 err_map:
+	device_unregister(&udc->gadget.dev);
+err_device_add:
 	iounmap(base_addr);
 err_mem:
 	release_mem_region(rsrc_start, rsrc_len);
@@ -1947,10 +1942,11 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "%s()\n", __func__);
 
-	usb_del_gadget_udc(&udc->gadget);
 	if (udc->driver)
 		return -EBUSY;
 
+	usb_del_gadget_udc(&udc->gadget);
+	device_unregister(&udc->gadget.dev);
 	debugfs_remove(udc->regs_info);
 
 	if (udc_info && !udc_info->udc_command &&

drivers/usb/gadget/u_uac1.c

@@ -240,8 +240,11 @@ static int gaudio_open_snd_dev(struct gaudio *card)
 	snd = &card->playback;
 	snd->filp = filp_open(fn_play, O_WRONLY, 0);
 	if (IS_ERR(snd->filp)) {
+		int ret = PTR_ERR(snd->filp);
+
 		ERROR(card, "No such PCM playback device: %s\n", fn_play);
 		snd->filp = NULL;
+		return ret;
 	}
 	pcm_file = snd->filp->private_data;
 	snd->substream = pcm_file->substream;

drivers/usb/host/ehci-hcd.c

@@ -748,11 +748,9 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 		/* guard against (alleged) silicon errata */
 		if (cmd & CMD_IAAD)
 			ehci_dbg(ehci, "IAA with IAAD still set?\n");
-		if (ehci->async_iaa) {
+		if (ehci->async_iaa)
 			COUNT(ehci->stats.iaa);
-			end_unlink_async(ehci);
-		} else
-			ehci_dbg(ehci, "IAA with nothing unlinked?\n");
+		end_unlink_async(ehci);
 	}
 
 	/* remote wakeup [4.3.1] */

drivers/usb/host/ehci-q.c

@@ -135,7 +135,7 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		 * qtd is updated in qh_completions(). Update the QH
 		 * overlay here.
 		 */
-		if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+		if (qh->hw->hw_token & ACTIVE_BIT(ehci)) {
 			qh->hw->hw_qtd_next = qtd->hw_next;
 			qtd = NULL;
 		}
@@ -449,11 +449,19 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			else if (last_status == -EINPROGRESS && !urb->unlinked)
 				continue;
 
-			/* qh unlinked; token in overlay may be most current */
-			if (state == QH_STATE_IDLE
-					&& cpu_to_hc32(ehci, qtd->qtd_dma)
-						== hw->hw_current) {
+			/*
+			 * If this was the active qtd when the qh was unlinked
+			 * and the overlay's token is active, then the overlay
+			 * hasn't been written back to the qtd yet so use its
+			 * token instead of the qtd's.  After the qtd is
+			 * processed and removed, the overlay won't be valid
+			 * any more.
+			 */
+			if (state == QH_STATE_IDLE &&
+					qh->qtd_list.next == &qtd->qtd_list &&
+					(hw->hw_token & ACTIVE_BIT(ehci))) {
 				token = hc32_to_cpu(ehci, hw->hw_token);
+				hw->hw_token &= ~ACTIVE_BIT(ehci);
 
 				/* An unlink may leave an incomplete
 				 * async transaction in the TT buffer.
@@ -1170,7 +1178,7 @@ static void single_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh)
 	struct ehci_qh		*prev;
 
 	/* Add to the end of the list of QHs waiting for the next IAAD */
-	qh->qh_state = QH_STATE_UNLINK;
+	qh->qh_state = QH_STATE_UNLINK_WAIT;
 	if (ehci->async_unlink)
 		ehci->async_unlink_last->unlink_next = qh;
 	else
@@ -1213,9 +1221,19 @@ static void start_iaa_cycle(struct ehci_hcd *ehci, bool nested)
 
 		/* Do only the first waiting QH (nVidia bug?) */
 		qh = ehci->async_unlink;
-		ehci->async_iaa = qh;
-		ehci->async_unlink = qh->unlink_next;
-		qh->unlink_next = NULL;
+
+		/*
+		 * Intel (?) bug: The HC can write back the overlay region
+		 * even after the IAA interrupt occurs.  In self-defense,
+		 * always go through two IAA cycles for each QH.
+		 */
+		if (qh->qh_state == QH_STATE_UNLINK_WAIT) {
+			qh->qh_state = QH_STATE_UNLINK;
+		} else {
+			ehci->async_iaa = qh;
+			ehci->async_unlink = qh->unlink_next;
+			qh->unlink_next = NULL;
+		}
 
 		/* Make sure the unlinks are all visible to the hardware */
 		wmb();

drivers/usb/musb/Kconfig

@@ -7,11 +7,6 @@
 config USB_MUSB_HDRC
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	depends on USB && USB_GADGET
-	select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
-	select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX)
-	select TWL4030_USB if MACH_OMAP_3430SDP
-	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
-	select OMAP_CONTROL_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
 	help
 	  Say Y here if your system has a dual role high speed USB

drivers/usb/musb/musb_core.c

@@ -1624,8 +1624,6 @@ EXPORT_SYMBOL_GPL(musb_dma_completion);
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef CONFIG_SYSFS
-
 static ssize_t
 musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -1742,8 +1740,6 @@ static const struct attribute_group musb_attr_group = {
 	.attrs = musb_attributes,
 };
 
-#endif	/* sysfs */
-
 /* Only used to provide driver mode change events */
 static void musb_irq_work(struct work_struct *data)
 {
@@ -1968,11 +1964,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	if (status < 0)
 		goto fail4;
 
-#ifdef CONFIG_SYSFS
 	status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
 	if (status)
 		goto fail5;
-#endif
 
 	pm_runtime_put(musb->controller);
 

drivers/usb/musb/omap2430.c

@@ -51,7 +51,7 @@ struct omap2430_glue {
 };
 #define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
-struct omap2430_glue		*_glue;
+static struct omap2430_glue	*_glue;
 
 static struct timer_list musb_idle_timer;
 
@@ -237,9 +237,13 @@ void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
 {
 	struct omap2430_glue	*glue = _glue;
 
-	if (glue && glue_to_musb(glue)) {
-		glue->status = status;
-	} else {
+	if (!glue) {
+		pr_err("%s: musb core is not yet initialized\n", __func__);
+		return;
+	}
+	glue->status = status;
+
+	if (!glue_to_musb(glue)) {
 		pr_err("%s: musb core is not yet ready\n", __func__);
 		return;
 	}

drivers/usb/otg/otg.c

@@ -130,7 +130,7 @@ struct usb_phy *usb_get_phy(enum usb_phy_type type)
 	spin_lock_irqsave(&phy_lock, flags);
 
 	phy = __usb_find_phy(&phy_list, type);
-	if (IS_ERR(phy)) {
+	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
 		pr_err("unable to find transceiver of type %s\n",
 			usb_phy_type_string(type));
 		goto err0;
@@ -228,7 +228,7 @@ struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
 	spin_lock_irqsave(&phy_lock, flags);
 
 	phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
-	if (IS_ERR(phy)) {
+	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
 		pr_err("unable to find transceiver\n");
 		goto err0;
 	}
@@ -301,8 +301,12 @@ EXPORT_SYMBOL(devm_usb_put_phy);
  */
 void usb_put_phy(struct usb_phy *x)
 {
-	if (x)
+	if (x) {
+		struct module *owner = x->dev->driver->owner;
+
 		put_device(x->dev);
+		module_put(owner);
+	}
 }
 EXPORT_SYMBOL(usb_put_phy);
 

drivers/usb/phy/omap-control-usb.c

@@ -219,32 +219,26 @@ static int omap_control_usb_probe(struct platform_device *pdev)
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 		"control_dev_conf");
-	control_usb->dev_conf = devm_request_and_ioremap(&pdev->dev, res);
-	if (!control_usb->dev_conf) {
-		dev_err(&pdev->dev, "Failed to obtain io memory\n");
-		return -EADDRNOTAVAIL;
-	}
+	control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(control_usb->dev_conf))
+		return PTR_ERR(control_usb->dev_conf);
 
 	if (control_usb->type == OMAP_CTRL_DEV_TYPE1) {
 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 			"otghs_control");
-		control_usb->otghs_control = devm_request_and_ioremap(
+		control_usb->otghs_control = devm_ioremap_resource(
 			&pdev->dev, res);
-		if (!control_usb->otghs_control) {
-			dev_err(&pdev->dev, "Failed to obtain io memory\n");
-			return -EADDRNOTAVAIL;
-		}
+		if (IS_ERR(control_usb->otghs_control))
+			return PTR_ERR(control_usb->otghs_control);
 	}
 
 	if (control_usb->type == OMAP_CTRL_DEV_TYPE2) {
 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 			"phy_power_usb");
-		control_usb->phy_power = devm_request_and_ioremap(
+		control_usb->phy_power = devm_ioremap_resource(
 			&pdev->dev, res);
-		if (!control_usb->phy_power) {
-			dev_dbg(&pdev->dev, "Failed to obtain io memory\n");
-			return -EADDRNOTAVAIL;
-		}
+		if (IS_ERR(control_usb->phy_power))
+			return PTR_ERR(control_usb->phy_power);
 
 		control_usb->sys_clk = devm_clk_get(control_usb->dev,
 			"sys_clkin");

drivers/usb/phy/omap-usb3.c

@@ -212,11 +212,9 @@ static int omap_usb3_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl");
-	phy->pll_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
-	if (!phy->pll_ctrl_base) {
-		dev_err(&pdev->dev, "ioremap of pll_ctrl failed\n");
-		return -ENOMEM;
-	}
+	phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(phy->pll_ctrl_base))
+		return PTR_ERR(phy->pll_ctrl_base);
 
 	phy->dev		= &pdev->dev;
 

drivers/usb/phy/samsung-usbphy.c

@@ -787,11 +787,9 @@ static int samsung_usbphy_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	phy_base = devm_request_and_ioremap(dev, phy_mem);
-	if (!phy_base) {
-		dev_err(dev, "%s: register mapping failed\n", __func__);
-		return -ENXIO;
-	}
+	phy_base = devm_ioremap_resource(dev, phy_mem);
+	if (IS_ERR(phy_base))
+		return PTR_ERR(phy_base);
 
 	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
 	if (!sphy)

drivers/usb/serial/cp210x.c

@@ -85,6 +85,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+	{ USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
 	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
 	{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
@@ -150,6 +151,25 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
 	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+	{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
+	{ USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
+	{ USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
+	{ USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
+	{ USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
+	{ USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
+	{ USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
+	{ USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
+	{ USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
+	{ USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
+	{ USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
+	{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
+	{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
+	{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
 	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */

drivers/usb/serial/option.c

@@ -341,6 +341,8 @@ static void option_instat_callback(struct urb *urb);
 #define CINTERION_PRODUCT_EU3_E			0x0051
 #define CINTERION_PRODUCT_EU3_P			0x0052
 #define CINTERION_PRODUCT_PH8			0x0053
+#define CINTERION_PRODUCT_AH6			0x0055
+#define CINTERION_PRODUCT_PLS8			0x0060
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -579,6 +581,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
@@ -1260,6 +1263,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, 
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },

drivers/usb/serial/qcaux.c

@@ -69,6 +69,7 @@ static struct usb_device_id id_table[] = {
 	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) },  /* NMEA */
 	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) },  /* WMC */
 	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) },  /* DIAG */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1fac, 0x0151, 0xff, 0xff, 0xff) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);

drivers/usb/serial/qcserial.c

@@ -197,12 +197,15 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 
 	if (is_gobi1k) {
 		/* Gobi 1K USB layout:
-		 * 0: serial port (doesn't respond)
+		 * 0: DM/DIAG (use libqcdm from ModemManager for communication)
 		 * 1: serial port (doesn't respond)
 		 * 2: AT-capable modem port
 		 * 3: QMI/net
 		 */
-		if (ifnum == 2)
+		if (ifnum == 0) {
+			dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
+			altsetting = 1;
+		} else if (ifnum == 2)
 			dev_dbg(dev, "Modem port found\n");
 		else
 			altsetting = -1;

drivers/usb/serial/quatech2.c

@@ -661,7 +661,9 @@ void qt2_process_read_urb(struct urb *urb)
 						 __func__);
 					break;
 				}
-				tty_flip_buffer_push(&port->port);
+
+				if (port_priv->is_open)
+					tty_flip_buffer_push(&port->port);
 
 				newport = *(ch + 3);
 
@@ -704,7 +706,8 @@ void qt2_process_read_urb(struct urb *urb)
 		tty_insert_flip_string(&port->port, ch, 1);
 	}
 
-	tty_flip_buffer_push(&port->port);
+	if (port_priv->is_open)
+		tty_flip_buffer_push(&port->port);
 }
 
 static void qt2_write_bulk_callback(struct urb *urb)

drivers/usb/storage/initializers.c

@@ -92,8 +92,8 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
 	return 0;
 }
 
-/* This places the HUAWEI usb dongles in multi-port mode */
-static int usb_stor_huawei_feature_init(struct us_data *us)
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
 {
 	int result;
 
@@ -104,75 +104,3 @@ static int usb_stor_huawei_feature_init(struct us_data *us)
 	US_DEBUGP("Huawei mode set result is %d\n", result);
 	return 0;
 }
-
-/*
- * It will send a scsi switch command called rewind' to huawei dongle.
- * When the dongle receives this command at the first time,
- * it will reboot immediately. After rebooted, it will ignore this command.
- * So it is  unnecessary to read its response.
- */
-static int usb_stor_huawei_scsi_init(struct us_data *us)
-{
-	int result = 0;
-	int act_len = 0;
-	struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
-	char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
-			0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
-	bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
-	bcbw->Tag = 0;
-	bcbw->DataTransferLength = 0;
-	bcbw->Flags = bcbw->Lun = 0;
-	bcbw->Length = sizeof(rewind_cmd);
-	memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
-	memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
-
-	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
-					US_BULK_CB_WRAP_LEN, &act_len);
-	US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
-	return result;
-}
-
-/*
- * It tries to find the supported Huawei USB dongles.
- * In Huawei, they assign the following product IDs
- * for all of their mobile broadband dongles,
- * including the new dongles in the future.
- * So if the product ID is not included in this list,
- * it means it is not Huawei's mobile broadband dongles.
- */
-static int usb_stor_huawei_dongles_pid(struct us_data *us)
-{
-	struct usb_interface_descriptor *idesc;
-	int idProduct;
-
-	idesc = &us->pusb_intf->cur_altsetting->desc;
-	idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
-	/* The first port is CDROM,
-	 * means the dongle in the single port mode,
-	 * and a switch command is required to be sent. */
-	if (idesc && idesc->bInterfaceNumber == 0) {
-		if ((idProduct == 0x1001)
-			|| (idProduct == 0x1003)
-			|| (idProduct == 0x1004)
-			|| (idProduct >= 0x1401 && idProduct <= 0x1500)
-			|| (idProduct >= 0x1505 && idProduct <= 0x1600)
-			|| (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
-			return 1;
-		}
-	}
-	return 0;
-}
-
-int usb_stor_huawei_init(struct us_data *us)
-{
-	int result = 0;
-
-	if (usb_stor_huawei_dongles_pid(us)) {
-		if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
-			result = usb_stor_huawei_scsi_init(us);
-		else
-			result = usb_stor_huawei_feature_init(us);
-	}
-	return result;
-}

drivers/usb/storage/initializers.h

@@ -46,5 +46,5 @@ int usb_stor_euscsi_init(struct us_data *us);
  * flash reader */
 int usb_stor_ucr61s2b_init(struct us_data *us);
 
-/* This places the HUAWEI usb dongles in multi-port mode */
-int usb_stor_huawei_init(struct us_data *us);
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);

drivers/usb/storage/unusual_devs.h

@@ -53,6 +53,14 @@
  * as opposed to devices that do something strangely or wrongly.
  */
 
+/* In-kernel mode switching is deprecated.  Do not add new devices to
+ * this list for the sole purpose of switching them to a different
+ * mode.  Existing userspace solutions are superior.
+ *
+ * New mode switching devices should instead be added to the database
+ * maintained at http://www.draisberghof.de/usb_modeswitch/
+ */
+
 #if !defined(CONFIG_USB_STORAGE_SDDR09) && \
 		!defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
 #define NO_SDDR09
@@ -1527,10 +1535,335 @@ UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
 /* Reported by fangxiaozhi <huananhu@huawei.com>
  * This brings the HUAWEI data card devices into multi-port mode
  */
-UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
+UNUSUAL_DEV(  0x12d1, 0x1001, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1003, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1004, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1401, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1402, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1403, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1404, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1405, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1406, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1407, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1408, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1409, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1410, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1411, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1412, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1413, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1414, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1415, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1416, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1417, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1418, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1419, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1420, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1421, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1422, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1423, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1424, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1425, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1426, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1427, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1428, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1429, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1430, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1431, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1432, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1433, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1434, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1435, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1436, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1437, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1438, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1439, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143F, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 
 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */

include/linux/usb/composite.h

@@ -60,7 +60,7 @@ struct usb_configuration;
  * @name: For diagnostics, identifies the function.
  * @strings: tables of strings, keyed by identifiers assigned during bind()
  *	and by language IDs provided in control requests
- * @descriptors: Table of full (or low) speed descriptors, using interface and
+ * @fs_descriptors: Table of full (or low) speed descriptors, using interface and
  *	string identifiers assigned during @bind().  If this pointer is null,
  *	the function will not be available at full speed (or at low speed).
  * @hs_descriptors: Table of high speed descriptors, using interface and
@@ -290,6 +290,7 @@ enum {
  *	after function notifications
  * @resume: Notifies configuration when the host restarts USB traffic,
  *	before function notifications
+ * @gadget_driver: Gadget driver controlling this driver
  *
  * Devices default to reporting self powered operation.  Devices which rely
  * on bus powered operation should report this in their @bind method.

tools/usb/ffs-test.c

@@ -38,7 +38,7 @@
 #include <unistd.h>
 #include <tools/le_byteshift.h>
 
-#include "../../include/linux/usb/functionfs.h"
+#include "../../include/uapi/linux/usb/functionfs.h"
 
 
 /******************** Little Endian Handling ********************************/