- 29 10月, 2014 10 次提交
-
-
由 Philipp Zabel 提交于
For small frame sizes, allocating 1 MiB per compressed buffer is a waste of space. On the other hand, incompressible 1080p data can produce JPEGs larger than 1 MiB at higher quality settings. Allow userspace to set the compressed buffer size and clamp the value to a sensible range. Also set the initial sizeimage to a value inside the range allowed by try_fmt. While at it, reduce the default image size to a maximum of 1920*1088 (otherwise JPEG will default to 8k*8k and 96 MiB buffers). Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Philipp Zabel 提交于
With bitstream padding, it is possible to decode a single JPEG in the bitstream immediately. This allows us to only ever queue a single JPEG into the bitstream buffer, except to increase payload over 512 bytes or to back out of hold state. This is a measure to decrease JPEG decoder latency. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Philipp Zabel 提交于
Before starting a PIC_RUN, pad the bitstream with 0xff until 256 bytes past the next multiple of 256 bytes, if the buffer to be decoded is the last buffer in the bitstream. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Philipp Zabel 提交于
Storing the buffer position in the bitstream with the buffer metadata allows to later use that information to drop metadata for skipped buffers and to determine whether bitstream padding has to be applied. This patch also renames struct coda_timestamp to struct coda_buffer_meta to make clear that it contains more than only the buffer timestamp. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Philipp Zabel 提交于
This patch adds JPEG encoding and decoding support for CODA7541, using the BIT processor. Separate JPEG encoder and decoder video devices are created due to different streaming behaviour and different supported pixel formats. The hardware can not change subsampling on the fly, but encode and decode 4:2:2 subsampled JPEG images from and into this format. The CODA7541 JPEG decoder uses the bitstream buffer and thus can run without new buffers queued if there is a buffer in the bitstream. Since there is no standard way to store the colorspace used in JPEGs, and to make v4l2-compliance happy, the JPEG format always reports V4L2_COLORSPACE_JPEG. Signed-off-by: NLucas Stach <l.stach@pengutronix.de> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Philipp Zabel 提交于
This patch adds support for the three-plane YUV422P format with one luma plane and two horizontally subsampled chroma planes. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Philipp Zabel 提交于
This patch adds support for the two-plane NV12 format with one luma plane and one interleaved chroma plane. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Philipp Zabel 提交于
Since the firmware newer writes to FRAME_MEM_CTRL, we can initialize it once per context (incidentally, we already do write it in coda_hw_init) and never have to read it back. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Philipp Zabel 提交于
This will still do a 1:1 copy into the internal buffers, but stop producing visual artifacts in chroma interleaved (NV12) mode. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Philipp Zabel 提交于
Add a helper function that writes a vb2_buffer's Y, Cb, and Cr plane base addresses of into three consecutive registers. This moves common code out of coda-bit.c. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 22 9月, 2014 1 次提交
-
-
由 Fabio Estevam 提交于
coda-bit uses kmalloc/kfree functions, so the slab header needs to be included in order to fix the following build errors: drivers/media/platform/coda/coda-bit.c: In function 'coda_fill_bitstream': drivers/media/platform/coda/coda-bit.c:231:4: error: implicit declaration of function 'kmalloc' [-Werror=implicit-function-declaration] drivers/media/platform/coda/coda-bit.c: In function 'coda_alloc_framebuffers': drivers/media/platform/coda/coda-bit.c:312:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 22 8月, 2014 6 次提交
-
-
由 Philipp Zabel 提交于
This patch breaks most long lines, concatenates broken up text strings, and adds or removes parentheses where needed to make checkpatch happy. The long codec list lines and a few 81-wide lines remain. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Philipp Zabel 提交于
Lock modification of the timestamp list with bitstream_mutex and do not try to remove a timestamp element if the list is empty. This can happen if the userspace feeds us garbage or multiple encoded frames in a single buffer. Signed-off-by: NMichael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Philipp Zabel 提交于
Produce some error messages when internal buffer allocation fails, for example because the CMA region is too small. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Philipp Zabel 提交于
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Philipp Zabel 提交于
The return value of this call to v4l2_m2m_next_dst_buf() is never used. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Philipp Zabel 提交于
This patch moves the BIT processor specific coda_context_ops, the firmware upload and other related functions from coda-common.c into coda-bit.c. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-