- 10 7月, 2007 1 次提交
-
-
由 Olof Johansson 提交于
Rename the pasemi platform to "pasemi" to be in line with the platform's directory name. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 29 6月, 2007 1 次提交
-
-
由 Arnd Bergmann 提交于
Many platforms currently define their own add_bridge function, some of them globally. This breaks some multiplatform configurations. Prefixing each of these functions with the platform name avoids this problem. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 25 6月, 2007 1 次提交
-
-
由 Olof Johansson 提交于
Glue code to hook up the pata_platform on the PA Semi Electra eval board. CFE sets up device tree entries for the IDE interface, with device type 'ide' and compatible field 'electra-ide'. We unfortunately need to modify the resources before calling the generic platform driver, since the device tree only has one register window in it and the driver expects two. Adding this as an of_platform driver instead doesn't give us any benefit, it just adds one more layer of register/probe functions. Since CONFIG_PATA_PLATFORM depends on CONFIG_EMBEDDED, add that as a default for PPC_PASEMI. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 14 6月, 2007 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 07 6月, 2007 1 次提交
-
-
由 Olof Johansson 提交于
The powerpc iommu code was refactored by Linas back in the 2.6.20 time frame to map 4K pages from the generic code, but I had forgotten to go back and fix my platform driver before submitting it. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 02 6月, 2007 1 次提交
-
-
由 Stephen Rothwell 提交于
and so needs to include asm/smp.h so a UP build works. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 17 5月, 2007 1 次提交
-
-
由 Olof Johansson 提交于
Current kernel implements proper TB sync, no need to keep GENERIC_TBSYNC enabled. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 12 5月, 2007 1 次提交
-
-
由 Stephen Rothwell 提交于
fixes: arch/powerpc/platforms/pasemi/idle.c: In function 'pasemi_system_reset_exception': arch/powerpc/platforms/pasemi/idle.c:55: warning: implicit declaration of function 'do_IRQ' Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 08 5月, 2007 1 次提交
-
-
由 Olof Johansson 提交于
Fixes for ethernet IRQ mapping, to be done in the driver instead of in the platform setup code. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 07 5月, 2007 2 次提交
-
-
由 Olof Johansson 提交于
Update the global cpu speed variable according to current cpufreq speed, /proc/cpuinfo reports the actual speed. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
for consistency with other Open Firmware interfaces (and Sparc). This is just a straight replacement. This leaves the compatibility define in place. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 02 5月, 2007 1 次提交
-
-
由 Olof Johansson 提交于
Only publish of_platform devices if running on a machine that has them. Signed-off-by: NOlof Johansson <olof@lixom.net> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 30 4月, 2007 1 次提交
-
-
由 Stephen Rothwell 提交于
Just another pass through arch/powerpc for old usages. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 27 4月, 2007 4 次提交
-
-
由 Olaf Hering 提交于
check_legacy_ioport makes only sense on PREP, CHRP and pSeries. They may have an isa node with PS/2, parport, floppy and serial ports. Remove the check_legacy_ioport call from ppc_md, it's not needed anymore. Hardware capabilities come from the device-tree. Signed-off-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Cpufreq driver for PA Semi PWRficient processors. Signed-off-by: NEgor Martovetsky <egor@pasemi.com> Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
arch/powerpc/platforms/pasemi/gpio_mdio.c really depends on CONFIG_PHYLIB. Add a config option for it, allow for it to be disabled if needed and fix the dependency. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
arch/powerpc/platforms/pasemi/setup.c: In function 'pasemi_publish_devices': arch/powerpc/platforms/pasemi/setup.c:220: warning: implicit declaration of function 'of_platform_bus_probe' Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 24 4月, 2007 3 次提交
-
-
由 Olof Johansson 提交于
MDIO driver for PHY's connected via GPIO as on the PA Semi Electra eval board. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Reset MPIC on boot to clear some timer state that firmware might leave configured. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Device 0 function 0 on the root bus is really a two-function bus agent, but only the first function is visible. Because of this, we need to allow config accesses into the second range. Modify the check for valid offsets accordingly. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 13 4月, 2007 2 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
This is more consistent and gets us closer to the Sparc code. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 22 3月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
Moved pseries, iseries, chrp, prep, maple and pasemi into their respective arch/powerpc/platform/*/Kconfig files out of arch/powerpc/Kconfig Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 15 3月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 3月, 2007 1 次提交
-
-
由 Stephen Rothwell 提交于
This will allow us to build without PCI easier. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 07 2月, 2007 7 次提交
-
-
由 Olof Johansson 提交于
I/O TLB support for PA6T-1682M. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
The DMA controller on PWRficient is somewhat special -- has a PCI header so it looks like it's on the root PCI (-Express) root bus, but it uses more than the default number of interrupts (and they are hardwired). We need to wire up all interrupts for the DMA controller. The generic IRQ code will only map the primary interrupt from the PCI header (128), so add 129->211 by hand. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Timebase update is simple on PA6T, since global updates can be done from one core by writing to an SPR. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Implement reset on platforms/pasemi. Default is just to reset the cpu using the SDC registers. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Powersave support on PA6T. Right now it only uses 'doze' mode, and will default to no savings (spin). Signed-off-by: NOlof Johansson <olof@lixom.net> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Print out decoded machine check information on PA6T. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Allow more than the default 256 MPIC sources. Allocates a new flag (MPIC_LARGE_VECTORS) to be used by platform code when instantiating the mpic. I picked 11 bits worth right now since it would cover the number of sources on any hardware I have seen. It can always be increased later if needed. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 09 1月, 2007 1 次提交
-
-
由 Nathan Lynch 提交于
The (maple|pasemi)_init_IRQ functions call of_node_put(root) once more than they should, causing the refcount of the root node to underflow, which triggers the WARN_ON in kref_get. Signed-off-by: NNathan Lynch <ntl@pobox.com> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 04 12月, 2006 2 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This patch completely refactors DMA operations for 64 bits powerpc. 32 bits is untouched for now. We use the new dev_archdata structure to add the dma operations pointer and associated data to struct device. While at it, we also add the OF node pointer and numa node. In the future, we might want to look into merging that with pci_dn as well. The old vio, pci-iommu and pci-direct DMA ops are gone. They are now replaced by a set of generic iommu and direct DMA ops (non PCI specific) that can be used by bus types. The toplevel implementation is now inline. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This patch reworks the way IRQs are fixed up on PCI for arch powerpc. It makes pci_read_irq_line() called by default in the PCI code for devices that are probed, and add an optional per-device fixup in ppc_md for platforms that really need to correct what they obtain from pci_read_irq_line(). It also removes ppc_md.irq_bus_setup which was only used by pSeries and should not be needed anymore. I've also removed the pSeries s7a workaround as it can't work with the current interrupt code anyway. I'm trying to get one of these machines working so I can test a proper fix for that problem. I also haven't updated the old-style fixup code from 85xx_cds.c because it's actually buggy :) It assigns pci_dev->irq hard coded numbers which is no good with the new IRQ mapping code. It should at least use irq_create_mapping(NULL, hard_coded_number); and possibly also set_irq_type() to set them as level low. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 10 10月, 2006 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 10月, 2006 1 次提交
-
-
由 Dave Jones 提交于
kbuild explicitly includes this at build time. Signed-off-by: NDave Jones <davej@redhat.com>
-
- 13 9月, 2006 1 次提交
-
-
由 Olof Johansson 提交于
Base patch for PA6T and PA6T-1682M. This introduces the arch/powerpc/platform/pasemi directory, together with basic implementations for various setup. Much of this was based on other platform code, i.e. Maple, etc. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-