Rename the pasemi platform to "pasemi" to be in line with the
platform's directory name.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

With !CONFIG_NUMA, these are static inlines in the header file so
don't generate exports for them in that case.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When booting a current kernel with CONFIG_PRINTK_TIME enabled you'll
see messages like:

[    0.000000] time_init: decrementer frequency = 188.044000 MHz
[    0.000000] time_init: processor frequency   = 1504.352000 MHz
[3712914.436297] Console: colour dummy device 80x25

This cause by the initialisation of tb_to_ns_scale in time_init(), suddenly the
multiplication in sched_clock() now does something :).  This patch modifies
sched_clock() to report the offset since the machine booted so the same
printk's now look like:

[    0.000000] time_init: decrementer frequency = 188.044000 MHz
[    0.000000] time_init: processor frequency   = 1504.352000 MHz
[    0.000135] Console: colour dummy device 80x25

Effectivly including the uptime in printk()s.

This patch makes tb_to_ns_scale and tb_to_ns_shift static and
read_mostly for good measure.
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This simply prevents a build error if no platform is selected.
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add support to build the PS3 flash rom image and remove some unneeded
lmb calls.

The PS3's lv1 loader supports loading gzipped binary images from flash
rom to addr zero. The loader enters the image at addr 0x100.

In this implementation a bootwrapper overlay is use to arrange for the
kernel to be loaded to addr zero and to have a suitable bootwrapper
entry at 0x100.  To construct the rom image, 0x100 bytes from offset
0x100 in the kernel is copied to the bootwrapper symbol
__system_reset_kernel.  The 0x100 bytes at the bootwrapper symbol
__system_reset_overlay is then copied to offset 0x100.  At runtime the
bootwrapper program copies the 0x100 bytes at __system_reset_kernel to
addr 0x100.

zImage.ps3 is a wrapped image that contains a flat device tree, an lv1
compatible entry point, and an optional initrd.  otheros.bld is the gzip
compresed rom image built from zImage.ps3.  otheros.bld is suitable for
programming into the PS3 boot flash memory.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Convert the semaphores in low_i2c that are used as mutexes to real
mutexes.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The arch/ppc tree has been in a semi-nebulous "bug fix only" state for a
few kernel releases now.  The patch below officially declares this as of
the 2.6.22 kernel release and schedules arch/ppc for removal in June of
2008.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The 750 CPU_FTR macros have quite a bit of duplication in them.  Consolidate
them to use CPU_FTRS_750 and only list the unique features for derivatives.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Oprofile enhanced instruction sampling support.

When performing instruction sampling, the mmcra[SLOT] field can be used to
more accurately identify the address of the sampled instruction.

Tested on power4, js20, power5 and power5+.
Signed-off-by: NWill Schmidt <will_schmidt@vnet.ibm.com>
cc: Maynard Johnson <maynardj@us.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

xmon_early and xmon_off are only used in this file.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The prom.c debugging code creates a "powerpc" directory in debugfs,
which is nice, but doesn't allow any other debugging code to stick things
under "powerpc" in debugfs. So make it global.

While we're there we should make the prom.c debugging code depend on
CONFIG_DEBUG_FS, because it doesn't work otherwise.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The device tree for the MPC8641 HPCN does not implement the device type
property for I8042 nodes.

In addition to checking the I8042 node's device type, also match the
keyboard and/or mouse nodes' compatible property.
Signed-off-by: NWade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When the refcount for a device node goes to 0, we call the
destructor - of_node_release(). This should only happen if we've
already detached the node from the device tree.

So add a flag OF_DETACHED which tracks detached-ness, and if we
find ourselves in of_node_release() without it set, issue a
warning and don't free the device_node. To avoid warning
continuously reinitialise the kref to a sane value.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The struct device_node currently has a _flags variable, although
it's only used for one flag - OF_DYNAMIC.  Generalise the flag
accessors so we can use them with other flags in future.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

It's not sensible to call of_detach_node() on the root node,
but we should check for it just to be safe.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When adding the cputable entry for 440SPe Rev. B, we also need to
adjust the existing entries for 440SP Rev. A and 440SPe Rev. B so that
they look more bits of the PVR.  The 440SPe Rev. B has PVR 53421891,
which would match the current 440SP Rev. A pattern of 53xxx891.  To
distinguish between 440SP and 440SPe, we need to use the first three
digits of the PVR, which are respectively 532 and 534.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The powerpc arch uses CONFIG_PPC instead of CONFIG_POWERPC.  This fixes
drivers/rtc/Kconfig to use the correct config option.
Signed-off-by: NWade Farnsworth <wfarnsworth@mvista.com>
Acked-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently, of_serial driver supports only 8250 compatible ports, but
prepares that others can easily be added.  Yet unregister routine
assumes port is 8250.  This corrects unregister routine to check
port type.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Current of_serial driver assumes unknown serial port to be 8250.  But
this behavior may cause fatal problems when the serial port is not
8250.  This corrects probe routine to ignore unknown serial port.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Replace the old-style member initializers with the newer designated
initializers.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

do_signal is never used in modular code (obviously), and no other
architecture exports it either.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Commit a885c8c4 that introduced the
getgeo block device method changed the fallback number of sectors and
introduced a bug into the fallback cylinder number calculation.

Thanks to Rusty Russell for noticing this.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Removed explicit linux,phandle usage.  Using references and labels now in PQ
and PQ2 boards currently supported in arch/powerpc.
Signed-off-by: NVitaly Bordug <vitb@kernel.crashing.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Adds support for PowerQuicc on-chip PCMCIA.  The driver is implemented as
of_device, so only arch/powerpc stuff is capable to use it, which now implies
only mpc885ads reference board.

To cope with the code that should be hooked inside driver, but is really board
specific (like set_voltage), global structure mpc8xx_pcmcia_ops holds
necessary function pointers that are filled in the BSP code.

[akpm@linux-foundation.org: whitespace diddles]
Signed-off-by: NVitaly Bordug <vitb@kernel.crashing.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NOlof Johansson <olof@lixom.net>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Use the eieio function so we can redefine what eieio does rather
than direct inline asm.  This is part code clean up and partially
because not all PPCs have eieio (book-e has mbar that maps to eieio).
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

When compiled without swap support, arch/mm/tlb.c complains about missing
function declarations. This patch fixes the warnings.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@technotrade.biz>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

sparse caught these static functions / __iomem annotations
under arch/powerpc/platform/52xx/
Signed-off-by: NDomen Puncer <domen.puncer@telargo.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add 831x USB platform setup code and rework 834x USB platform setup code.
Move USB platform code to usb.c for different boards with CPU of the same
series to share the USB initialization code.
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Remove redundant pci_read_irq_line() function for 85xx CDS board.
This function has been realized in common ppc pci code.
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Acked-by: NAndy Fleming <afleming@freescale.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Just did a directly merge from asm-ppc into asm-powerpc.  This is the last
header that we directly include from asm-powerpc.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The PHY is active-low on the MPC85xx CDS and the 8560 ADS just had
the wrong sense for the internal PCI and CPM interrupts.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

arch/powerpc still relies on asm-ppc/mmu.h for some 32-bit MMU types.
This patch is another step towards fixing this.  It takes the portions
of asm-ppc/mmu.h related to 8xx embedded CPUs which are still relevant
in arch/powerpc and puts them in a new asm-powerpc/mmu-8xx.h,
included when appropriate from asm-powerpc/mmu.h.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

arch/powerpc still relies on asm-ppc/mmu.h for some 32-bit MMU types.
This patch is another step towards fixing this.  It takes the portions
of asm-ppc/mmu.h related to Freescale Book-E which are still relevant
in arch/powerpc and puts them in a new asm-powerpc/mmu-fsl-booke.h,
included when appropriate from asm-powerpc/mmu.h.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

pcibios_enable_resources isn't used anywhere and not exported.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Remove uses of hack GET_64BIT() property macro and use
the more general of_read_number() function from prom.h
as suggested by Milton.
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Make the interrupt numbers match the OpenPIC spec intead of the
Freescale docs which distinguish between internal and external interrupts.

Now we can use the interrupt number directly to find the register offset
associated with it.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

For the 83xx, 85xx, and 86xx device trees, add a "local-mac-address" property
to every Ethernet node that didn't have one.  Add a comment indicating that
the "address" and/or "mac-address" properties are deprecated in DTS files
and will be removed at a later time.  Change all MAC address properties to
have a zero MAC address value.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>