In order to prevent a O(n) search of the filesystem to link up its uio
node with its target configuration, TCMU needs to know the minor number
that UIO assigned. Expose the definition of this struct so TCMU can
access this field.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The target code has a rather generous helping of smp_mb__after_atomic()
throughout the code base.  Most atomic operations were followed by one
and none were preceded by smp_mb__before_atomic(), nor accompanied by a
comment explaining the need for a barrier.

Instead of trying to prove for every case whether or not it is needed,
this patch introduces atomic_inc_mb() and atomic_dec_mb(), which
explicitly include the memory barriers before and after the atomic
operation.  For now they are defined in a target header, although they
could be of general use.

Most of the existing atomic/mb combinations were replaced by the new
helpers.  In a few cases the atomic was sandwiched in
spin_lock/spin_unlock and I simply removed the barrier.

I suspect that in most cases the correct conversion would have been to
drop the barrier.  I also suspect that a few cases exist where a) the
barrier was necessary and b) a second barrier before the atomic would
have been necessary and got added by this patch.
Signed-off-by: NJoern Engel <joern@logfs.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The performance regression that Josef Bacik reported in the pathname
lookup (see commit 99d263d4 "vfs: fix bad hashing of dentries") made
me look at performance stability of the dcache code, just to verify that
the problem was actually fixed.  That turned up a few other problems in
this area.

There are a few cases where we exit RCU lookup mode and go to the slow
serializing case when we shouldn't, Al has fixed those and they'll come
in with the next VFS pull.

But my performance verification also shows that link_path_walk() turns
out to have a very unfortunate 32-bit store of the length and hash of
the name we look up, followed by a 64-bit read of the combined hash_len
field.  That screws up the processor store to load forwarding, causing
an unnecessary hickup in this critical routine.

It's caused by the ugly calling convention for the "hash_name()"
function, and easily fixed by just making hash_name() fill in the whole
'struct qstr' rather than passing it a pointer to just the hash value.

With that, the profile for this function looks much smoother.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The hash_64() function historically does the multiply by the
GOLDEN_RATIO_PRIME_64 number with explicit shifts and adds, because
unlike the 32-bit case, gcc seems unable to turn the constant multiply
into the more appropriate shift and adds when required.

However, that means that we generate those shifts and adds even when the
architecture has a fast multiplier, and could just do it better in
hardware.

Use the now-cleaned-up CONFIG_ARCH_HAS_FAST_MULTIPLIER (together with
"is it a 64-bit architecture") to decide whether to use an integer
multiply or the explicit sequence of shift/add instructions.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

timeval_to_jiffies tried to round a timeval up to an integral number
of jiffies, but the logic for doing so was incorrect: intervals
corresponding to exactly N jiffies would become N+1. This manifested
itself particularly repeatedly stopping/starting an itimer:

setitimer(ITIMER_PROF, &val, NULL);
setitimer(ITIMER_PROF, NULL, &val);

would add a full tick to val, _even if it was exactly representable in
terms of jiffies_ (say, the result of a previous rounding.)  Doing
this repeatedly would cause unbounded growth in val.  So fix the math.

Here's what was wrong with the conversion: we essentially computed
(eliding seconds)

jiffies = usec  * (NSEC_PER_USEC/TICK_NSEC)

by using scaling arithmetic, which took the best approximation of
NSEC_PER_USEC/TICK_NSEC with denominator of 2^USEC_JIFFIE_SC =
x/(2^USEC_JIFFIE_SC), and computed:

jiffies = (usec * x) >> USEC_JIFFIE_SC

and rounded this calculation up in the intermediate form (since we
can't necessarily exactly represent TICK_NSEC in usec.) But the
scaling arithmetic is a (very slight) *over*approximation of the true
value; that is, instead of dividing by (1 usec/ 1 jiffie), we
effectively divided by (1 usec/1 jiffie)-epsilon (rounding
down). This would normally be fine, but we want to round timeouts up,
and we did so by adding 2^USEC_JIFFIE_SC - 1 before the shift; this
would be fine if our division was exact, but dividing this by the
slightly smaller factor was equivalent to adding just _over_ 1 to the
final result (instead of just _under_ 1, as desired.)

In particular, with HZ=1000, we consistently computed that 10000 usec
was 11 jiffies; the same was true for any exact multiple of
TICK_NSEC.

We could possibly still round in the intermediate form, adding
something less than 2^USEC_JIFFIE_SC - 1, but easier still is to
convert usec->nsec, round in nanoseconds, and then convert using
time*spec*_to_jiffies.  This adds one constant multiplication, and is
not observably slower in microbenchmarks on recent x86 hardware.

Tested: the following program:

int main() {
  struct itimerval zero = {{0, 0}, {0, 0}};
  /* Initially set to 10 ms. */
  struct itimerval initial = zero;
  initial.it_interval.tv_usec = 10000;
  setitimer(ITIMER_PROF, &initial, NULL);
  /* Save and restore several times. */
  for (size_t i = 0; i < 10; ++i) {
    struct itimerval prev;
    setitimer(ITIMER_PROF, &zero, &prev);
    /* on old kernels, this goes up by TICK_USEC every iteration */
    printf("previous value: %ld %ld %ld %ld\n",
           prev.it_interval.tv_sec, prev.it_interval.tv_usec,
           prev.it_value.tv_sec, prev.it_value.tv_usec);
    setitimer(ITIMER_PROF, &prev, NULL);
  }
    return 0;
}

Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Turner <pjt@google.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: NPaul Turner <pjt@google.com>
Reported-by: NAaron Jacobs <jacobsa@google.com>
Signed-off-by: NAndrew Hunter <ahh@google.com>
[jstultz: Tweaked to apply to 3.17-rc]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

The flag tells us that the hypervisor maps a grant page to guest
physical address == machine address of the page in addition to the
normal grant mapping address. It is needed to properly issue cache
maintenance operation at the completion of a DMA operation involving a
foreign grant.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: NDenis Schneider <v1ne2go@gmail.com>

The new header file memfd.h from commit 9183df25 ("shm: add
memfd_create() syscall") should be exported.
Signed-off-by: NDavid Drysdale <drysdale@google.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is useful for userspace to know that there not dealing with a regular
mouse but rather with a pointing stick (e.g. a trackpoint) so that
userspace can e.g. automatically enable middle button scrollwheel
emulation.

It is impossible to tell the difference from the evdev info without
resorting to putting a list of device / driver names in userspace, this is
undesirable.

Add a property which allows userspace to see if a device is a pointing
stick, and set it on all the pointing stick drivers.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NPeter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This patch fix spelling typo found in DocBook/networking.xml.
It is because the neworking.xml is generated from comments
in the source, I have to fix typo in comments within the source.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The timestamping API has separate bits for generating and reporting
timestamps. A software timestamp should only be reported for a packet
when the packet has the relevant generation flag (SKBTX_..) set
and the socket has reporting bit SOF_TIMESTAMPING_SOFTWARE set.

The second check was accidentally removed. Reinstitute the original
behavior.

Tested:
  Without this patch, Documentation/networking/txtimestamp reports
  timestamps regardless of whether SOF_TIMESTAMPING_SOFTWARE is set.
  After the patch, it only reports them when the flag is set.

Fixes: f24b9be5 ("net-timestamp: extend SCM_TIMESTAMPING ancillary data struct")
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: 588b48ca ("usbip: move usbip userspace code out of staging")
which introduced build failure by not changing uapi/usbip.h include path
according to new location.
Signed-off-by: NPiotr Król <piotr.krol@3mdeb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The local nohz kick is currently used by perf which needs it to be
NMI-safe. Recent commit though (7d1311b9)
changed its implementation to fire the local kick using the remote kick
API. It was convenient to make the code more generic but the remote kick
isn't NMI-safe.

As a result:

	WARNING: CPU: 3 PID: 18062 at kernel/irq_work.c:72 irq_work_queue_on+0x11e/0x140()
	CPU: 3 PID: 18062 Comm: trinity-subchil Not tainted 3.16.0+ #34
	0000000000000009 00000000903774d1 ffff880244e06c00 ffffffff9a7f1e37
	0000000000000000 ffff880244e06c38 ffffffff9a0791dd ffff880244fce180
	0000000000000003 ffff880244e06d58 ffff880244e06ef8 0000000000000000
	Call Trace:
	<NMI>  [<ffffffff9a7f1e37>] dump_stack+0x4e/0x7a
	[<ffffffff9a0791dd>] warn_slowpath_common+0x7d/0xa0
	[<ffffffff9a07930a>] warn_slowpath_null+0x1a/0x20
	[<ffffffff9a17ca1e>] irq_work_queue_on+0x11e/0x140
	[<ffffffff9a10a2c7>] tick_nohz_full_kick_cpu+0x57/0x90
	[<ffffffff9a186cd5>] __perf_event_overflow+0x275/0x350
	[<ffffffff9a184f80>] ? perf_event_task_disable+0xa0/0xa0
	[<ffffffff9a01a4cf>] ? x86_perf_event_set_period+0xbf/0x150
	[<ffffffff9a187934>] perf_event_overflow+0x14/0x20
	[<ffffffff9a020386>] intel_pmu_handle_irq+0x206/0x410
	[<ffffffff9a0b54d3>] ? arch_vtime_task_switch+0x63/0x130
	[<ffffffff9a01937b>] perf_event_nmi_handler+0x2b/0x50
	[<ffffffff9a007b72>] nmi_handle+0xd2/0x390
	[<ffffffff9a007aa5>] ? nmi_handle+0x5/0x390
	[<ffffffff9a0d131b>] ? lock_release+0xab/0x330
	[<ffffffff9a008062>] default_do_nmi+0x72/0x1c0
	[<ffffffff9a0c925f>] ? cpuacct_account_field+0xcf/0x200
	[<ffffffff9a008268>] do_nmi+0xb8/0x100

Lets fix this by restoring the use of local irq work for the nohz local
kick.
Reported-by: NCatalin Iacob <iacobcatalin@gmail.com>
Reported-and-tested-by: NDave Jones <davej@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The _SUN device indentification object is not guaranteed to return
the same value every time it is executed, so we should not cache its
return value, but rather execute it every time as needed.  If it is
cached, an incorrect stale value may be used in some situations.

This issue was exposed by commit 202317a5 (ACPI / scan: Add
acpi_device objects for all device nodes in the namespace).  Fix it
by avoiding to cache the return value of _SUN.

Fixes: 202317a5 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace)
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
[ rjw: Changelog ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This reverts commit 8b37e1be.

It's broken as it changes led_blink_set() in a way that it can now sleep
(while synchronously waiting for workqueue to be cancelled). That's a
problem, because it's possible that this function gets called from atomic
context (tpt_trig_timer() takes a readlock and thus disables preemption).

This has been brought up 3 weeks ago already [1] but no proper fix has
materialized, and I keep seeing the problem since 3.17-rc1.

[1] https://lkml.org/lkml/2014/8/16/128

 BUG: sleeping function called from invalid context at kernel/workqueue.c:2650
 in_atomic(): 1, irqs_disabled(): 0, pid: 2335, name: wpa_supplicant
 5 locks held by wpa_supplicant/2335:
  #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff814c7c92>] rtnl_lock+0x12/0x20
  #1:  (&wdev->mtx){+.+.+.}, at: [<ffffffffc06e649c>] cfg80211_mgd_wext_siwessid+0x5c/0x180 [cfg80211]
  #2:  (&local->mtx){+.+.+.}, at: [<ffffffffc0817dea>] ieee80211_prep_connection+0x17a/0x9a0 [mac80211]
  #3:  (&local->chanctx_mtx){+.+.+.}, at: [<ffffffffc08081ed>] ieee80211_vif_use_channel+0x5d/0x2a0 [mac80211]
  #4:  (&trig->leddev_list_lock){.+.+..}, at: [<ffffffffc081e68c>] tpt_trig_timer+0xec/0x170 [mac80211]
 CPU: 0 PID: 2335 Comm: wpa_supplicant Not tainted 3.17.0-rc3 #1
 Hardware name: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008
  ffff8800360b5a50 ffff8800751f76d8 ffffffff8159e97f ffff8800360b5a30
  ffff8800751f76e8 ffffffff810739a5 ffff8800751f77b0 ffffffff8106862f
  ffffffff810685d0 0aa2209200000000 ffff880000000004 ffff8800361c59d0
 Call Trace:
  [<ffffffff8159e97f>] dump_stack+0x4d/0x66
  [<ffffffff810739a5>] __might_sleep+0xe5/0x120
  [<ffffffff8106862f>] flush_work+0x5f/0x270
  [<ffffffff810685d0>] ? mod_delayed_work_on+0x80/0x80
  [<ffffffff810945ca>] ? mark_held_locks+0x6a/0x90
  [<ffffffff81068a5f>] ? __cancel_work_timer+0x6f/0x100
  [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0
  [<ffffffff81068a6b>] __cancel_work_timer+0x7b/0x100
  [<ffffffff81068b0e>] cancel_delayed_work_sync+0xe/0x10
  [<ffffffff8147cf3b>] led_blink_set+0x1b/0x40
  [<ffffffffc081e6b0>] tpt_trig_timer+0x110/0x170 [mac80211]
  [<ffffffffc081ecdd>] ieee80211_mod_tpt_led_trig+0x9d/0x160 [mac80211]
  [<ffffffffc07e4278>] __ieee80211_recalc_idle+0x98/0x140 [mac80211]
  [<ffffffffc07e59ce>] ieee80211_idle_off+0xe/0x10 [mac80211]
  [<ffffffffc0804e5b>] ieee80211_add_chanctx+0x3b/0x220 [mac80211]
  [<ffffffffc08062e4>] ieee80211_new_chanctx+0x44/0xf0 [mac80211]
  [<ffffffffc080838a>] ieee80211_vif_use_channel+0x1fa/0x2a0 [mac80211]
  [<ffffffffc0817df8>] ieee80211_prep_connection+0x188/0x9a0 [mac80211]
  [<ffffffffc081c246>] ieee80211_mgd_auth+0x256/0x2e0 [mac80211]
  [<ffffffffc07eab33>] ieee80211_auth+0x13/0x20 [mac80211]
  [<ffffffffc06cb006>] cfg80211_mlme_auth+0x106/0x270 [cfg80211]
  [<ffffffffc06ce085>] cfg80211_conn_do_work+0x155/0x3b0 [cfg80211]
  [<ffffffffc06cf670>] cfg80211_connect+0x3f0/0x540 [cfg80211]
  [<ffffffffc06e6148>] cfg80211_mgd_wext_connect+0x158/0x1f0 [cfg80211]
  [<ffffffffc06e651e>] cfg80211_mgd_wext_siwessid+0xde/0x180 [cfg80211]
  [<ffffffffc06e36c0>] ? cfg80211_wext_giwessid+0x50/0x50 [cfg80211]
  [<ffffffffc06e36dd>] cfg80211_wext_siwessid+0x1d/0x40 [cfg80211]
  [<ffffffff81584d0c>] ioctl_standard_iw_point+0x14c/0x3e0
  [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0
  [<ffffffff8158502a>] ioctl_standard_call+0x8a/0xd0
  [<ffffffff81584fa0>] ? ioctl_standard_iw_point+0x3e0/0x3e0
  [<ffffffff81584b76>] wireless_process_ioctl.constprop.10+0xb6/0x100
  [<ffffffff8158521d>] wext_handle_ioctl+0x5d/0xb0
  [<ffffffff814cfb29>] dev_ioctl+0x329/0x620
  [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0
  [<ffffffff8149c7f2>] sock_ioctl+0x142/0x2e0
  [<ffffffff811b0140>] do_vfs_ioctl+0x300/0x520
  [<ffffffff815a67fb>] ? sysret_check+0x1b/0x56
  [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0
  [<ffffffff811b03e1>] SyS_ioctl+0x81/0xa0
  [<ffffffff815a67d6>] system_call_fastpath+0x1a/0x1f
 wlan0: send auth to 00:0b:6b:3c:8c:e4 (try 1/3)
 wlan0: authenticated
 wlan0: associate with 00:0b:6b:3c:8c:e4 (try 1/3)
 wlan0: RX AssocResp from 00:0b:6b:3c:8c:e4 (capab=0x431 status=0 aid=2)
 wlan0: associated
 IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
 cfg80211: Calling CRDA for country: NA
 wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:0b:6b:3c:8c:e4

 =================================
 [ INFO: inconsistent lock state ]
 3.17.0-rc3 #1 Not tainted
 ---------------------------------
 inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
 swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
  ((&(&led_cdev->blink_work)->work)){+.?...}, at: [<ffffffff810685d0>] flush_work+0x0/0x270
 {SOFTIRQ-ON-W} state was registered at:
   [<ffffffff81094dbe>] __lock_acquire+0x30e/0x1a30
   [<ffffffff81096c81>] lock_acquire+0x91/0x110
   [<ffffffff81068608>] flush_work+0x38/0x270
   [<ffffffff81068a6b>] __cancel_work_timer+0x7b/0x100
   [<ffffffff81068b0e>] cancel_delayed_work_sync+0xe/0x10
   [<ffffffff8147cf3b>] led_blink_set+0x1b/0x40
   [<ffffffffc081e6b0>] tpt_trig_timer+0x110/0x170 [mac80211]
   [<ffffffffc081ecdd>] ieee80211_mod_tpt_led_trig+0x9d/0x160 [mac80211]
   [<ffffffffc07e4278>] __ieee80211_recalc_idle+0x98/0x140 [mac80211]
   [<ffffffffc07e59ce>] ieee80211_idle_off+0xe/0x10 [mac80211]
   [<ffffffffc0804e5b>] ieee80211_add_chanctx+0x3b/0x220 [mac80211]
   [<ffffffffc08062e4>] ieee80211_new_chanctx+0x44/0xf0 [mac80211]
   [<ffffffffc080838a>] ieee80211_vif_use_channel+0x1fa/0x2a0 [mac80211]
   [<ffffffffc0817df8>] ieee80211_prep_connection+0x188/0x9a0 [mac80211]
   [<ffffffffc081c246>] ieee80211_mgd_auth+0x256/0x2e0 [mac80211]
   [<ffffffffc07eab33>] ieee80211_auth+0x13/0x20 [mac80211]
   [<ffffffffc06cb006>] cfg80211_mlme_auth+0x106/0x270 [cfg80211]
   [<ffffffffc06ce085>] cfg80211_conn_do_work+0x155/0x3b0 [cfg80211]
   [<ffffffffc06cf670>] cfg80211_connect+0x3f0/0x540 [cfg80211]
   [<ffffffffc06e6148>] cfg80211_mgd_wext_connect+0x158/0x1f0 [cfg80211]
   [<ffffffffc06e651e>] cfg80211_mgd_wext_siwessid+0xde/0x180 [cfg80211]
   [<ffffffffc06e36dd>] cfg80211_wext_siwessid+0x1d/0x40 [cfg80211]
   [<ffffffff81584d0c>] ioctl_standard_iw_point+0x14c/0x3e0
   [<ffffffff8158502a>] ioctl_standard_call+0x8a/0xd0
   [<ffffffff81584b76>] wireless_process_ioctl.constprop.10+0xb6/0x100
   [<ffffffff8158521d>] wext_handle_ioctl+0x5d/0xb0
   [<ffffffff814cfb29>] dev_ioctl+0x329/0x620
   [<ffffffff8149c7f2>] sock_ioctl+0x142/0x2e0
   [<ffffffff811b0140>] do_vfs_ioctl+0x300/0x520
   [<ffffffff811b03e1>] SyS_ioctl+0x81/0xa0
   [<ffffffff815a67d6>] system_call_fastpath+0x1a/0x1f
 irq event stamp: 493416
 hardirqs last  enabled at (493416): [<ffffffff81068a5f>] __cancel_work_timer+0x6f/0x100
 hardirqs last disabled at (493415): [<ffffffff81067e9f>] try_to_grab_pending+0x1f/0x160
 softirqs last  enabled at (493408): [<ffffffff81053ced>] _local_bh_enable+0x1d/0x50
 softirqs last disabled at (493409): [<ffffffff81054c75>] irq_exit+0xa5/0xb0

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock((&(&led_cdev->blink_work)->work));
   <Interrupt>
     lock((&(&led_cdev->blink_work)->work));

  *** DEADLOCK ***

 2 locks held by swapper/0/0:
  #0:  (((&tpt_trig->timer))){+.-...}, at: [<ffffffff810b4c50>] call_timer_fn+0x0/0x180
  #1:  (&trig->leddev_list_lock){.+.?..}, at: [<ffffffffc081e68c>] tpt_trig_timer+0xec/0x170 [mac80211]

 stack backtrace:
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0-rc3 #1
 Hardware name: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008
  ffffffff8246eb30 ffff88007c203b00 ffffffff8159e97f ffffffff81a194c0
  ffff88007c203b50 ffffffff81599c29 0000000000000001 ffffffff00000001
  ffff880000000000 0000000000000006 ffffffff81a194c0 ffffffff81093ad0
 Call Trace:
  <IRQ>  [<ffffffff8159e97f>] dump_stack+0x4d/0x66
  [<ffffffff81599c29>] print_usage_bug+0x1f4/0x205
  [<ffffffff81093ad0>] ? check_usage_backwards+0x140/0x140
  [<ffffffff810944d3>] mark_lock+0x223/0x2b0
  [<ffffffff81094d60>] __lock_acquire+0x2b0/0x1a30
  [<ffffffff81096c81>] lock_acquire+0x91/0x110
  [<ffffffff810685d0>] ? mod_delayed_work_on+0x80/0x80
  [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211]
  [<ffffffff81068608>] flush_work+0x38/0x270
  [<ffffffff810685d0>] ? mod_delayed_work_on+0x80/0x80
  [<ffffffff810945ca>] ? mark_held_locks+0x6a/0x90
  [<ffffffff81068a5f>] ? __cancel_work_timer+0x6f/0x100
  [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211]
  [<ffffffff8109469d>] ? trace_hardirqs_on_caller+0xad/0x1c0
  [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211]
  [<ffffffff81068a6b>] __cancel_work_timer+0x7b/0x100
  [<ffffffff81068b0e>] cancel_delayed_work_sync+0xe/0x10
  [<ffffffff8147cf3b>] led_blink_set+0x1b/0x40
  [<ffffffffc081e6b0>] tpt_trig_timer+0x110/0x170 [mac80211]
  [<ffffffff810b4cc5>] call_timer_fn+0x75/0x180
  [<ffffffff810b4c50>] ? process_timeout+0x10/0x10
  [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211]
  [<ffffffff810b50ac>] run_timer_softirq+0x1fc/0x2f0
  [<ffffffff81054805>] __do_softirq+0x115/0x2e0
  [<ffffffff81054c75>] irq_exit+0xa5/0xb0
  [<ffffffff810049b3>] do_IRQ+0x53/0xf0
  [<ffffffff815a74af>] common_interrupt+0x6f/0x6f
  <EOI>  [<ffffffff8147b56e>] ? cpuidle_enter_state+0x6e/0x180
  [<ffffffff8147b732>] cpuidle_enter+0x12/0x20
  [<ffffffff8108bba0>] cpu_startup_entry+0x330/0x360
  [<ffffffff8158fb51>] rest_init+0xc1/0xd0
  [<ffffffff8158fa90>] ? csum_partial_copy_generic+0x170/0x170
  [<ffffffff81af3ff2>] start_kernel+0x44f/0x45a
  [<ffffffff81af399c>] ? set_init_arg+0x53/0x53
  [<ffffffff81af35ad>] x86_64_start_reservations+0x2a/0x2c
  [<ffffffff81af36a0>] x86_64_start_kernel+0xf1/0xf4

Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NBryan Wu <cooloney@gmail.com>

commit 39b2bbe3
"gpio: add flags argument to gpiod_get*() functions"
added a dynamic flags argument to all the GPIOD getter
functions, however this did not cover the stubs so
when people used gpiod stubs to compile out descriptor
code, compilation failed.

Solve this by:
- Also rename all the stub functions __gpiod_*
- Moving the vararg hack outside of #ifdef CONFIG_GPIOLIB
  so these will always be available.
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Since SCTP day 1, that is, 19b55a2af145 ("Initial commit") from lksctp
tree, the official <netinet/sctp.h> header carries a copy of enum
sctp_sstat_state that looks like (compared to the current in-kernel
enumeration):

  User definition:                     Kernel definition:

  enum sctp_sstat_state {              typedef enum {
    SCTP_EMPTY             = 0,          <removed>
    SCTP_CLOSED            = 1,          SCTP_STATE_CLOSED            = 0,
    SCTP_COOKIE_WAIT       = 2,          SCTP_STATE_COOKIE_WAIT       = 1,
    SCTP_COOKIE_ECHOED     = 3,          SCTP_STATE_COOKIE_ECHOED     = 2,
    SCTP_ESTABLISHED       = 4,          SCTP_STATE_ESTABLISHED       = 3,
    SCTP_SHUTDOWN_PENDING  = 5,          SCTP_STATE_SHUTDOWN_PENDING  = 4,
    SCTP_SHUTDOWN_SENT     = 6,          SCTP_STATE_SHUTDOWN_SENT     = 5,
    SCTP_SHUTDOWN_RECEIVED = 7,          SCTP_STATE_SHUTDOWN_RECEIVED = 6,
    SCTP_SHUTDOWN_ACK_SENT = 8,          SCTP_STATE_SHUTDOWN_ACK_SENT = 7,
  };                                   } sctp_state_t;

This header was later on also placed into the uapi, so that user space
programs can compile without having <netinet/sctp.h>, but the shipped
with <linux/sctp.h> instead.

While RFC6458 under 8.2.1.Association Status (SCTP_STATUS) says that
sstat_state can range from SCTP_CLOSED to SCTP_SHUTDOWN_ACK_SENT, we
nevertheless have a what it appears to be dummy SCTP_EMPTY state from
the very early days.

While it seems to do just nothing, commit 0b8f9e25 ("sctp: remove
completely unsed EMPTY state") did the right thing and removed this dead
code. That however, causes an off-by-one when the user asks the SCTP
stack via SCTP_STATUS API and checks for the current socket state thus
yielding possibly undefined behaviour in applications as they expect
the kernel to tell the right thing.

The enumeration had to be changed however as based on the current socket
state, we access a function pointer lookup-table through this. Therefore,
I think the best way to deal with this is just to add a helper function
sctp_assoc_to_state() to encapsulate the off-by-one quirk.
Reported-by: NTristan Su <sooqing@gmail.com>
Fixes: 0b8f9e25 ("sctp: remove completely unsed EMPTY state")
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Acked-by: NVlad Yasevich <vyasevich@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the function which we use to set VXLAN DMFS (flow-steering) rules
from mlx4_en to mlx4_core. This refactoring will allow the mlx4_ib driver
to call the helper for the use case of user-space RAW Ethernet QPs, such
that they can serve VXLAN traffic too.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The guard was introduced in commit ea1a8217 ("xattr: guard against
simultaneous glibc header inclusion") but it is using #ifdef to check
for a define that is either set to 1 or 0.  Fix it to use #if instead.

* Without this patch:

  $ { echo "#include <sys/xattr.h>"; echo "#include <linux/xattr.h>"; } | gcc -E -Iinclude/uapi - >/dev/null
  include/uapi/linux/xattr.h:19:0: warning: "XATTR_CREATE" redefined [enabled by default]
   #define XATTR_CREATE 0x1 /* set value, fail if attr already exists */
   ^
  /usr/include/x86_64-linux-gnu/sys/xattr.h:32:0: note: this is the location of the previous definition
   #define XATTR_CREATE XATTR_CREATE
   ^

* With this patch:

  $ { echo "#include <sys/xattr.h>"; echo "#include <linux/xattr.h>"; } | gcc -E -Iinclude/uapi - >/dev/null
  (no warnings)
Signed-off-by: NFilipe Brandenburger <filbranden@google.com>
Acked-by: NSerge E. Hallyn <serge.hallyn@ubuntu.com>
Cc: Allan McRae <allan@archlinux.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It turns out that there are some serious problems with the on-disk
format of journal checksum v2.  The foremost is that the function to
calculate descriptor tag size returns sizes that are too big.  This
causes alignment issues on some architectures and is compounded by the
fact that some parts of jbd2 use the structure size (incorrectly) to
determine the presence of a 64bit journal instead of checking the
feature flags.

Therefore, introduce journal checksum v3, which enlarges the
descriptor block tag format to allow for full 32-bit checksums of
journal blocks, fix the journal tag function to return the correct
sizes, and fix the jbd2 recovery code to use feature flags to
determine 64bitness.

Add a few function helpers so we don't have to open-code quite so
many pieces.

Switching to a 16-byte block size was found to increase journal size
overhead by a maximum of 0.1%, to convert a 32-bit journal with no
checksumming to a 32-bit journal with checksum v3 enabled.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reported-by: NTR Reardon <thomas_reardon@hotmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

Fix kernel-doc warnings in regulator header files:

Warning(..//include/linux/regulator/machine.h:140): No description found for parameter 'ramp_disable'
Warning(..//include/linux/regulator/driver.h:279): No description found for parameter 'linear_ranges'
Warning(..//include/linux/regulator/driver.h:279): No description found for parameter 'n_linear_ranges'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

The seqno_fence_init() function's cond argument isn't described in the
kerneldoc comment. Fix that to silence a warning when building DocBook
documentation.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>

For v3.12 and prior, 1-bit Hamming code ECC via software was the
default choice. Commit c66d0391 in v3.13 changed the behaviour
to use 1-bit Hamming code via Hardware using a different ECC layout
i.e. (ROM code layout) than what is used by software ECC.

This ECC layout change causes NAND filesystems created in v3.12
and prior to be unusable in v3.13 and later. So revert back to
using software ECC by default if an ECC scheme is not explicitely
specified.

This defect can be observed on the following boards during legacy boot

-omap3beagle
-omap3touchbook
-overo
-am3517crane
-devkit8000
-ldp
-3430sdp
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

At this point, USB/IP kernel code is fully functional
and can be moved out of staging.
Signed-off-by: NValentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use HAVE_JUMP_LABEL as elsewhere in the kernel to ensure
that the toolchain has the required support in addition to
CONFIG_JUMP_LABEL being set.
Signed-off-by: NZhouyi Zhou <yizhouzhou@ict.ac.cn>
Reviewed-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This handles the 'nonblock=false' case in nfs_lock_and_join_requests.
If the group is already locked and blocking is allowed, drop the inode lock
and wait for the group lock to be cleared before trying it all again.
This should fix warnings found in peterz's tree (sched/wait branch), where
might_sleep() checks are added to wait.[ch].
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Reviewed-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

This patch introduces DEF_NIDS_PER_INODE/GET_ORPHAN_BLOCKS/F2FS_CP_PACKS macro
instead of numbers in code for readability.

change log from v1:
 o fix typo pointed out by Jaegeuk Kim.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Currently the top level debug file system function tracer shares its
ftrace_ops with the function graph tracer. This was thought to be fine
because the tracers are not used together, as one can only enable
function or function_graph tracer in the current_tracer file.

But that assumption proved to be incorrect. The function profiler
can use the function graph tracer when function tracing is enabled.
Since all function graph users uses the function tracing ftrace_ops
this causes a conflict and when a user enables both function profiling
as well as the function tracer it will crash ftrace and disable it.

The quick solution so far is to move them as separate ftrace_ops like
it was earlier. The problem though is to synchronize the functions that
are traced because both function and function_graph tracer are limited
by the selections made in the set_ftrace_filter and set_ftrace_notrace
files.

To handle this, a new structure is made called ftrace_ops_hash. This
structure will now hold the filter_hash and notrace_hash, and the
ftrace_ops will point to this structure. That will allow two ftrace_ops
to share the same hashes.

Since most ftrace_ops do not share the hashes, and to keep allocation
simple, the ftrace_ops structure will include both a pointer to the
ftrace_ops_hash called func_hash, as well as the structure itself,
called local_hash. When the ops are registered, the func_hash pointer
will be initialized to point to the local_hash within the ftrace_ops
structure. Some of the ftrace internal ftrace_ops will be initialized
statically. This will allow for the function and function_graph tracer
to have separate ops but still share the same hash tables that determine
what functions they trace.

Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out)
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=82912Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Theoretically, our total inodes number is the same as total node number, but
there are three node ids are reserved in f2fs, they are 0, 1 (node nid), and 2
(meta nid), and they should never be used by user, so our total/free inode
number calculated in ->statfs is wrong.

This patch indroduces F2FS_RESERVED_NODE_NUM and then fixes this issue by
recalculating total/free inode number with the macro.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The GPIOD flags are defined inside the #ifdef CONFIG_GPIOLIB
switch, making the gpiolib stubs fail if these flags are used
by a consumer. This is not correct: the stubs should compile
fine without GPIOLIB.
Reported-by: NUlf Hansson <ulf.hansson@linaro.org>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Recently the LE passive scanning and auto-connections feature was
introduced. It uses the hci_connect_le() API which returns a hci_conn
along with a reference count to that object. All previous users would
tie this returned reference to some existing object, such as an L2CAP
channel, and there'd be no leaked references this way. For
auto-connections however the reference was returned but not stored
anywhere, leaving established connections with one higher reference
count than they should have.

Instead of playing special tricks with hci_conn_hold/drop this patch
associates the returned reference from hci_connect_le() with the object
that in practice does own this reference, i.e. the hci_conn_params
struct that caused us to initiate a connection in the first place. Once
the connection is established or fails to establish this reference is
removed appropriately.

One extra thing needed is to call hci_pend_le_actions_clear() before
calling hci_conn_hash_flush() so that the reference is cleared before
the hci_conn objects are fully removed.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Change the comment type (from /** to /*) to prevent DocBook from
complaining about missing description for nand_sdr_timings fields.

There is currently no need in documenting those fields because they are
fully described in the ONFI specification (which is pointed out in the
comment).
Signed-off-by: NBoris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Tested-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

This patch drops the userspace accessable sysfs entry for the maximum
datagram size of a 6LoWPAN fragment packet.

A fragment should not have a datagram size value greater than 1280 byte.
Instead of make this value configurable, we accept 1280 datagram size
fragment packets only.
Signed-off-by: NMartin Townsend <martin.townsend@xsilon.com>
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Commit da3c6647(I2C/ACPI: Clean up I2C ACPI code and Add CONFIG_I2C_ACPI
config) adds a new kernel config I2C_ACPI and make I2C core built in
when the config is selected. This is wrong because distributions
etc generally compile I2C as a module and the commit broken that.
This patch is to rename I2C_ACPI to ACPI_I2C_OPREGION. New config
only controls ACPI I2C operation region code and depends on I2C=y.
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
[wsa: removed unrelated change for Kconfig]
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Instead of hard coding the value properly document
that this is an userspace interface.

No intended functional change.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Commit 9183df25 ("shm: add memfd_create() syscall") added a new
system call (memfd_create) but didn't update the asm-generic unistd
header.

This patch adds the new system call to the asm-generic version of
unistd.h so that it can be used by architectures such as arm64.

Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Commit 7523a271 - "ASoC: core: add a helper for extended byte controls using
TLV" introduced support for TLV byte controls but had a typo for the info
function, so fix the same
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>