- 06 9月, 2009 38 次提交
-
-
由 Chien Tung 提交于
Old query_port code reports static MTU and link state values. Instead, map actual MTU to next largest IB_MTU_* constant and correctly report link state. Cc: Steve Wise <swise@opengridcomputing.com> Reported-by: NJeff Squyres <jsquyres@cisco.com> Signed-off-by: NChien Tung <chien.tin.tung@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Don Wood 提交于
The disconn routine has been reworked to acoomodate the terminate and flushing changes. The routine has been reorganized to make all the decisions at the start then it performs all the required operations. This simplified the lock handling and is easier to follow. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Don Wood 提交于
Use the flush status to fill in cqe status when a specific error has been identified. Subsequent flushed completions still use the flushed value. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Don Wood 提交于
When a flush request is given to the hw, it will place one cqe marked as flushed (unless there is nothing to flush). An application that is waiting for all wqe's to complete will be left hanging. This modifies poll_cq to return the correct number of flushes for the pending elements on the wq. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Don Wood 提交于
When an asynchronous event occurs that requires a terminate, it is sometimes possible to identify the wqe in error. This change uses flush to get this information to the poll routine. The flush operation puts the status into the cqe. If this information is not available, it continues to use the more generic flush code as before. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Don Wood 提交于
Implement the sending and receiving of Terminate packets. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Don Wood 提交于
CQ errors are not being handled correctly. Put in the the upcall for CQ errors. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Don Wood 提交于
When a QP is destroyed, unprocessed CQ entries could still reference the QP. This change zeroes the context value at QP destroy time. By skipping over cqe's with a zero context, poll_cq no longer processes a cqe for a destroyed QP. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Don Wood 提交于
The routine to allocate a cqp request is not called from process context code. Since it is not OK to sleep, it needs to use GFP_ATOMIC not GFP_KERNEL. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Don Wood 提交于
The code currently has a work structure in the QP. This requires a lock and a pending flag to ensure there is never more than one request active. When two events happen quickly (such as FIN and LLP CLOSE), it causes unnecessary timeouts since the second one is dropped. This fix allocates memory for the work request so the second one can be queued. A lock is removed since it is no longer needed. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Don Wood 提交于
During termination, it is possible for the refcnt to go to zero while the worker thread is posting events upward. This fix increments the refcnt before the request is passed to the worker thread. The thread decrements the refcnt when the request is completed. Signed-off-by: NDon Wood <donald.e.wood@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: fix freeing of unallocated memory firewire: ohci: fix Ricoh R5C832, video reception firewire: ohci: fix Agere FW643 and multiple cameras firewire: core: fix crash in iso resource management
-
由 Roderick Colenbrander 提交于
This patch fixes a null pointer exception caused by removal of 'ack()' for level interrupts in the Xilinx interrupt driver. A recent change to the xilinx interrupt controller removed the ack hook for level irqs. Signed-off-by: NRoderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/~dwmw2/mtd-2.6.31由 Linus Torvalds 提交于
* git://git.infradead.org/~dwmw2/mtd-2.6.31: JFFS2: add missing verify buffer allocation/deallocation mtd: nftl: fix offset alignments mtd: nftl: write support is broken mtd: m25p80: fix null pointer dereference bug
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: Allow changing max_sectors_kb above the default 512
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/oxygen' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: oxygen: handle cards with missing EEPROM sound: oxygen: fix MCLK rate for 192 kHz playback
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: tc: Fix unitialized kernel memory leak pkt_sched: Revert tasklet_hrtimer changes. net: sk_free() should be allowed right after sk_alloc() gianfar: gfar_remove needs to call unregister_netdev() ipw2200: firmware DMA loading rework
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: skcipher - Fix skcipher_dequeue_givcrypt NULL test
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Re-enable cpufreq suspend and resume code
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix csum_ipv6_magic() [IA64] Fix warning in dma-mapping.c
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: actually enable the swapext compat handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix preempt count underflow in nilfs_btnode_prepare_change_key
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: don't assume existence of cpu0
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6由 Linus Torvalds 提交于
* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Fix kmem_cache_destroy() with SLAB_DESTROY_BY_RCU
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm snapshot: fix on disk chunk size validation dm exception store: split set_chunk_size dm snapshot: fix header corruption race on invalidation dm snapshot: refactor zero_disk_area to use chunk_io dm log: userspace add luid to distinguish between concurrent log instances dm raid1: do not allow log_failure variable to unset after being set dm log: remove incorrect field from userspace table output dm log: fix userspace status output dm stripe: expose correct io hints dm table: add more context to terse warning messages dm table: fix queue_limit checking device iterator dm snapshot: implement iterate devices dm multipath: fix oops when request based io fails when no paths
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI SR-IOV: correct broken resource alignment calculations
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix bootup with mcount in some configs. sparc64: Kill spurious NMI watchdog triggers by increasing limit to 30 seconds.
-
由 Linus Torvalds 提交于
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_counter/powerpc: Fix cache event codes for POWER7 perf_counter: Fix /0 bug in swcounters perf_counters: Increase paranoia level
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atkbd - add Compaq Presario R4000-series repeat quirk Input: i8042 - add Acer Aspire 5536 to the nomux list
-
由 Nicolas Pitre 提交于
In ext2_rename(), dir_page is acquired through ext2_dotdot(). It is then released through ext2_set_link() but only if old_dir != new_dir. Failing that, the pkmap reference count is never decremented and the page remains pinned forever. Repeat that a couple times with highmem pages and all pkmap slots get exhausted, and every further kmap() calls end up stalling on the pkmap_map_wait queue at which point the whole system comes to a halt. Signed-off-by: NNicolas Pitre <nico@marvell.com> Acked-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: ocfs2_write_begin_nolock() should handle len=0 ocfs2: invalidate dentry if its dentry_lock isn't initialized.
-
由 Linus Torvalds 提交于
The whole write-room thing is something that is up to the _caller_ to worry about, not the pty layer itself. The total buffer space will still be limited by the buffering routines themselves, so there is no advantage or need in having pty_write() artificially limit the size somehow. And what happened was that the caller (the n_tty line discipline, in this case) may have verified that there is room for 2 bytes to be written (for NL -> CRNL expansion), and it used to then do those writes as two single-byte writes. And if the first byte written (CR) then caused a new tty buffer to be allocated, pty_space() may have returned zero when trying to write the second byte (LF), and then incorrectly failed the write - leading to a lost newline character. This should finally fix http://bugzilla.kernel.org/show_bug.cgi?id=14015Reported-by: NMikael Pettersson <mikpe@it.uu.se> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
When translating CR to CRNL in the n_tty line discipline, we did it as two tty_put_char() calls. Which works, but is stupid, and has caused problems before too with bad interactions with the write_room() logic. The generic USB serial driver had that problem, for example. Now the pty layer had similar issues after being moved to the generic tty buffering code (in commit d945cb9c: "pty: Rework the pty layer to use the normal buffering logic"). So stop doing the silly separate two writes, and do it as a single write instead. That's what the n_tty layer already does for the space expansion of tabs (XTABS), and it means that we'll now always have just a single write for the CRNL to match the single 'tty_write_room()' test, which hopefully means that the next time somebody screws up buffering, it won't cause weeks of debugging. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
Tom Horsley reports that his debugger hangs when it tries to read /proc/pid_of_tracee/maps, this happens since "mm_for_maps: take ->cred_guard_mutex to fix the race with exec" 04b836cbf19e885f8366bccb2e4b0474346c02d commit in 2.6.31. But the root of the problem lies in the fact that do_execve() path calls tracehook_report_exec() which can stop if the tracer sets PT_TRACE_EXEC. The tracee must not sleep in TASK_TRACED holding this mutex. Even if we remove ->cred_guard_mutex from mm_for_maps() and proc_pid_attr_write(), another task doing PTRACE_ATTACH should not hang until it is killed or the tracee resumes. With this patch do_execve() does not use ->cred_guard_mutex directly and we do not hold it throughout, instead: - introduce prepare_bprm_creds() helper, it locks the mutex and calls prepare_exec_creds() to initialize bprm->cred. - install_exec_creds() drops the mutex after commit_creds(), and thus before tracehook_report_exec()->ptrace_stop(). or, if exec fails, free_bprm() drops this mutex when bprm->cred != NULL which indicates install_exec_creds() was not called. Reported-by: NTom Horsley <tom.horsley@att.net> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NDavid Howells <dhowells@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
On low-memory systems, anti-fragmentation gets disabled as fragmentation cannot be avoided on a sufficiently large boundary to be worthwhile. Once disabled, there is a period of time when all the pageblocks are marked MOVABLE and the expectation is that they get marked UNMOVABLE at each call to __rmqueue_fallback(). However, when MAX_ORDER is large the pageblocks do not change ownership because the normal criteria are not met. This has the effect of prematurely breaking up too many large contiguous blocks. This is most serious on NOMMU systems which depend on high-order allocations to boot. This patch causes pageblocks to change ownership on every fallback when anti-fragmentation is disabled. This prevents the large blocks being prematurely broken up. This is a fix to commit 49255c61 [page allocator: move check for disabled anti-fragmentation out of fastpath] and the problem affects 2.6.31-rc8. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Tested-by: NPaul Mundt <lethal@linux-sh.org> Cc: David Howells <dhowells@redhat.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: NGreg Ungerer <gerg@snapgear.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Fix the error handling in do_mmap_pgoff(). If do_mmap_shared_file() or do_mmap_private() fail, we jump to the error_put_region label at which point we cann __put_nommu_region() on the region - but we haven't yet added the region to the tree, and so __put_nommu_region() may BUG because the region tree is empty or it may corrupt the region tree. To get around this, we can afford to add the region to the region tree before calling do_mmap_shared_file() or do_mmap_private() as we keep nommu_region_sem write-locked, so no-one can race with us by seeing a transient region. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Acked-by: NPaul Mundt <lethal@linux-sh.org> Cc: Mel Gorman <mel@csn.ul.ie> Acked-by: NGreg Ungerer <gerg@snapgear.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
cancel_delayed_work() has to use del_timer_sync() to guarantee the timer function is not running after return. But most users doesn't actually need this, and del_timer_sync() has problems: it is not useable from interrupt, and it depends on every lock which could be taken from irq. Introduce __cancel_delayed_work() which calls del_timer() instead. The immediate reason for this patch is http://bugzilla.kernel.org/show_bug.cgi?id=13757 but hopefully this helper makes sense anyway. As for 13757 bug, actually we need requeue_delayed_work(), but its semantics are not yet clear. Merge this patch early to resolves cross-tree interdependencies between input and infiniband. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 9月, 2009 2 次提交
-
-
由 Stefan Richter 提交于
If a target writes invalid status (typically status of a command that already timed out), firewire-sbp2 attempts to put away an ORB that doesn't exist. https://bugzilla.redhat.com/show_bug.cgi?id=519772Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
In dual-buffer DMA mode, no video frames are ever received from R5C832 by libdc1394. Fallback to packet-per-buffer DMA works reliably. http://thread.gmane.org/gmane.linux.kernel.firewire.devel/13393/focus=13476Reported-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-