RDMA/nes: Map MTU to IB_MTU_* and correctly report link state

Old query_port code reports static MTU and link state values.
Instead, map actual MTU to next largest IB_MTU_* constant and
correctly report link state.

Cc: Steve Wise <swise@opengridcomputing.com>
Reported-by: NJeff Squyres <jsquyres@cisco.com>
Signed-off-by: NChien Tung <chien.tin.tung@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

drivers/infiniband/hw/nes/nes_verbs.c

@@ -667,15 +667,32 @@ static int nes_query_device(struct ib_device *ibdev, struct ib_device_attr *prop
  */
 static int nes_query_port(struct ib_device *ibdev, u8 port, struct ib_port_attr *props)
 {
+	struct nes_vnic *nesvnic = to_nesvnic(ibdev);
+	struct net_device *netdev = nesvnic->netdev;
+
 	memset(props, 0, sizeof(*props));
 
-	props->max_mtu = IB_MTU_2048;
-	props->active_mtu = IB_MTU_2048;
+	props->max_mtu = IB_MTU_4096;
+
+	if (netdev->mtu  >= 4096)
+		props->active_mtu = IB_MTU_4096;
+	else if (netdev->mtu  >= 2048)
+		props->active_mtu = IB_MTU_2048;
+	else if (netdev->mtu  >= 1024)
+		props->active_mtu = IB_MTU_1024;
+	else if (netdev->mtu  >= 512)
+		props->active_mtu = IB_MTU_512;
+	else
+		props->active_mtu = IB_MTU_256;
+
 	props->lid = 1;
 	props->lmc = 0;
 	props->sm_lid = 0;
 	props->sm_sl = 0;
-	props->state = IB_PORT_ACTIVE;
+	if (nesvnic->linkup)
+		props->state = IB_PORT_ACTIVE;
+	else
+		props->state = IB_PORT_DOWN;
 	props->phys_state = 0;
 	props->port_cap_flags = IB_PORT_CM_SUP | IB_PORT_REINIT_SUP |
 			IB_PORT_VENDOR_CLASS_SUP | IB_PORT_BOOT_MGMT_SUP;