- 31 3月, 2010 5 次提交
-
-
由 Sjur Braendeland 提交于
Adding GPRS Net Device for PDP Contexts. The device can be managed by RTNL as defined in if_caif.h. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Implementation of CAIF sockets for protocol and address family PF_CAIF and AF_CAIF. CAIF socket is connection oriented implementing SOCK_SEQPACKET and SOCK_STREAM interface with supporting blocking and non-blocking mode. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Registration and deregistration of CAIF Link Layer. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
Support functions for the caif protocol stack: cfcnfg.c - CAIF Configuration Module used for adding and removing drivers and connection cfpkt_skbuff.c - CAIF Packet layer (SKB helper functions) Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sjur Braendeland 提交于
CAIF generic protocol implementation. This layer is somewhat generic in order to be able to use and test it outside the Linux Kernel. cfctrl.c - CAIF control protocol layer cfdbgl.c - CAIF debug protocol layer cfdgml.c - CAIF datagram protocol layer cffrml.c - CAIF framing protocol layer cfmuxl.c - CAIF mux protocol layer cfrfml.c - CAIF remote file manager protocol layer cfserl.c - CAIF serial (fragmentation) protocol layer cfsrvl.c - CAIF generic service layer functions cfutill.c - CAIF utility protocol layer cfveil.c - CAIF AT protocol layer cfvidl.c - CAIF video protocol layer Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 3月, 2010 2 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 3月, 2010 2 次提交
-
-
由 Jan Engelhardt 提交于
When more data is stuffed into an nlmsg than initially projected, an extra allocation needs to be done. Reserve enough for IFLA_STATS64 so that this does not to needlessy happen. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Tony Luck observes that the original IFLA_STATS64 submission causes unaligned accesses. This is because nla_data() returns a pointer to a memory region that is only aligned to 32 bits. Do some memcpying to workaround this. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2010 1 次提交
-
-
由 Tom Goff 提交于
This was included in OpenVZ kernels but wasn't integrated upstream. >From git://git.openvz.org/pub/linux-2.6.24-openvz: commit 5c69402f18adf7276352e051ece2cf31feefab02 Author: Alexey Dobriyan <adobriyan@openvz.org> Date: Mon Dec 24 14:37:45 2007 +0300 netlink: fixup ->tgid to work in multiple PID namespaces Signed-off-by: NTom Goff <thomas.goff@boeing.com> Acked-by: NAlexey Dobriyan <adobriyan@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2010 3 次提交
-
-
由 David S. Miller 提交于
Finishing naturally from hlist_for_each_entry(x, ...) does not result in 'x' being NULL. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Use list_add_tail() to get the behavior we had before the list_head conversion for ipv6 address lists. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
RPS currently depends on SMP and SYSFS Adding a CONFIG_RPS makes sense in case this requirement changes in the future. This patch saves about 1500 bytes of kernel text in case SMP is on but SYSFS is off. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2010 8 次提交
-
-
由 Frans Pop 提交于
Signed-off-by: NFrans Pop <elendil@planet.nl> Cc: Per Liden <per.liden@ericsson.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frans Pop 提交于
Signed-off-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We never use "sk" so this patch removes it. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We never actually use "dev" so I removed it. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We don't need "dev" any more after: a5a04819 [LLC]: station source mac address Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We don't need "sdata" any more after: d84f3234 mac80211: remove dev_hold/put calls Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Add support for the set_cqm_config op. This op function configures the requested connection quality monitor rssi threshold and rssi hysteresis values to the hardware if the hardware supports IEEE80211_HW_SUPPORTS_CQM. For unsupported hardware, currently -EOPNOTSUPP is returned, so the mac80211 is currently not doing connection quality monitoring on the host. This could be added later, if needed. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Add support for basic configuration of a connection quality monitoring to the nl80211 interface, and basic support for notifying about triggered monitoring events. Via this interface a user-space connection manager may configure and receive pre-warning events of deteriorating WLAN connection quality, and start preparing for roaming in advance, before the connection is already lost. An example usage of such a trigger is starting scanning for nearby AP's in an attempt to find one with better connection quality, and associate to it before the connection characteristics of the existing connection become too bad or the association is even lost, leading in a prolonged delay in connectivity. The interface currently supports only RSSI, but it could be later extended to include other parameters, such as signal-to-noise ratio, if need for that arises. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 3月, 2010 4 次提交
-
-
由 Tom Herbert 提交于
Need to take spinlocks when dequeuing from input_pkt_queue in flush_backlog. Also, flush_backlog can now be called directly from netdev_run_todo. Signed-off-by: NTom Herbert <therbert@google.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Juuso Oikarinen 提交于
This patch is based on a RFC patch by Kalle Valo. The wl1271 has a feature which handles the connection monitor logic in hardware, basically sending periodically nullfunc frames and reporting to the host if AP is lost, after attempting to recover by sending probe-requests to the AP. Add support to mac80211 by adding a new flag IEEE80211_HW_CONNECTION_MONITOR which prevents conn_mon_timer from triggering during idle periods, and prevents sending probe-requests to the AP if beacon-loss is indicated by the hardware. Cc: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
There's a wireless.h macro for this, might as well use it. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
There's a wireless.h macro for this, might as well use it. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 3月, 2010 2 次提交
-
-
由 Tom Goff 提交于
Mostly minor changes to add a net argument to various functions and remove initial network namespace checks. Make /proc/net/psched per network namespace. Signed-off-by: NTom Goff <thomas.goff@boeing.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Fix build with CONFIG_SYSFS not enabled. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 3月, 2010 9 次提交
-
-
由 Dan Carpenter 提交于
We never actually use iph again so this assignment can be removed. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Olsson 提交于
Here is patch to manipulate packet node allocation and implicitly how packets are DMA'd etc. The flag NODE_ALLOC enables the function and numa_node_id(); when enabled it can also be explicitly controlled via a new node parameter Tested this with 10 Intel 82599 ports w. TYAN S7025 E5520 CPU's. Was able to TX/DMA ~80 Gbit/s to Ethernet wires. Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use RCU to avoid RTNL use in dev_getfirstbyhwtype() Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
There is no point to align or pad mibs to cache lines, they are per cpu allocated with a 8 bytes alignment anyway. This wastes space for no gain. This patch removes __SNMP_MIB_ALIGN__ Since SNMP mibs contain "unsigned long" fields only, we can relax the allocation alignment from "unsigned long long" to "unsigned long" Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use kasprintf in atm_proc_dev_register() Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We currently force a synchronize_net() in netdev_set_master() This seems necessary only when a slave had a master and we dismantle it. In the other case ("ifenslave bond0 ethO"), we dont need this long delay. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Its currently hard to diagnose when ACK frames are dropped because an application set TCP_DEFER_ACCEPT on its listening socket. See http://bugzilla.kernel.org/show_bug.cgi?id=15507 This patch adds a SNMP value, named TCPDeferAcceptDrop netstat -s | grep TCPDeferAcceptDrop TCPDeferAcceptDrop: 0 This counter is incremented every time we drop a pure ACK frame received by a socket in SYN_RECV state because its SYNACK retrans count is lower than defer_accept value. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
After the type change, addresses in unicast and multicast lists wouldn't make sense, not to mention possible different lenghts. So flush both lists here. Note "dev_addr_discard" will be very soon replaced by "dev_mc_flush" (once mc_list conversion will be done). Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Ignore the new NETDEV_PRE_TYPE_CHANGE event in rtnetlink_event() since there have been no changes userspace needs to be notified of. Also add a comment to the netdev notifier event definitions to remind people to update the exclusion list when adding new event types. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2010 4 次提交
-
-
由 David S. Miller 提交于
hlist_for_each_entry(p...) will not necessarily initialize 'p' to anything if the hlist is empty. GCC notices this and emits a warning. Just return true explicitly when we hit a match, and return false is we fall out of the loop without one. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
This patch reduces timer events while keeping accuracy by rounding our timer and/or batching several address validations in addrconf_verify(). addrconf_verify() is called at earliest timeout among interface addresses' timeouts, but at maximum ADDR_CHECK_FREQUENCY (120 secs). In most cases, all of timeouts of interface addresses are long enough (e.g. several hours or days vs 2 minutes), this timer is usually called every ADDR_CHECK_FREQUENCY, and it is okay to be lazy. (Note this timer could be eliminated if all code paths which modifies variables related to timeouts call us manually, but it is another story.) However, in other least but important cases, we try keeping accuracy. When the real interface address timeout is coming, and the timeout is just before the rounded timeout, we accept some error. When a timeout has been reached, we also try batching other several events in very near future. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The variable regen_advance is only used in the privacy case. Move it to simplify code and eliminate ifdef's Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Fix some of the checkpatch complaints. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-