- 27 4月, 2009 8 次提交
-
-
由 Grant Likely 提交于
The patch reworks the MPC5200 Fast Ethernet Controller (FEC) driver to use the of_mdio infrastructure for registering PHY devices from data out openfirmware device tree, and eliminates the assumption that the PHY for the FEC is always attached to the FEC's own MDIO bus. With this patch, the FEC can use a PHY attached to any MDIO bus if it is described in the device tree. Tested on Freescale Lite5200b eval board Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Grant Likely 提交于
Add support for parsing the device tree for PHY devices on an MDIO bus. Currently many of the PowerPC ethernet drivers are open coding a solution for reading data out of the device tree to find the correct PHY device. This patch implements a set of common routines to: a) let MDIO bus drivers register phy_devices described in the tree, and b) let MAC drivers find the correct phy_device via the tree. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Grant Likely 提交于
Add phy_connect_direct() and phy_attach_direct() functions so that drivers can use a pointer to the phy_device instead of trying to determine the phy's bus_id string. This patch is useful for OF device tree descriptions of phy devices where the driver doesn't need or know what the bus_id value in order to get a phy_device pointer. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Grant Likely 提交于
This patch makes changes in preparation for supporting open firmware device tree descriptions of MDIO busses. Changes include: - Cleanup handling of phy_map[] entries; they are already NULLed when registering and so don't need to be re-cleared, and it is good practice to clear them out when unregistering. - Split phy_device registration out into a new function so that the OF helpers can do two stage registration (separate allocation and registration steps). Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Grant Likely 提交于
of_parse_phandle() is a helper function to read and parse a phandle property and return a pointer to the resulting device_node. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
The IP MIB (RFC 4293) defines stats for InOctets, OutOctets, InMcastOctets and OutMcastOctets: http://tools.ietf.org/html/rfc4293 But it seems we don't track those in any way that easy to separate from other protocols. This patch adds those missing counters to the stats file. Tested successfully by me With help from Eric Dumazet. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Dykstra 提交于
Remove redundant set of skb->dev (now handled for ethernet drivers by eth_type_trans()). Signed-off-by: NJohn Dykstra <john.dykstra1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rami Rosen 提交于
This patch removes an unused parameter (tb_stamp) from fib_table structure in include/net/ip_fib.h. Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2009 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6由 David S. Miller 提交于
Conflicts: net/mac80211/pm.c
-
- 25 4月, 2009 2 次提交
-
-
由 John W. Linville 提交于
net/mac80211/tx.c: In function ‘ieee80211_tx_h_select_key’: net/mac80211/tx.c:448: warning: ‘key’ may be used uninitialized in this function drivers/net/wireless/ath/ath9k/rc.c: In function ‘ath_rc_rate_getidx’: drivers/net/wireless/ath/ath9k/rc.c:815: warning: ‘nextindex’ may be used uninitialized in this function drivers/net/wireless/hostap/hostap_plx.c: In function ‘prism2_plx_probe’: drivers/net/wireless/hostap/hostap_plx.c:438: warning: ‘cor_index’ may be used uninitialized in this function drivers/net/wireless/hostap/hostap_plx.c:438: warning: ‘cor_offset’ may be used uninitialized in this function Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
drivers/net/wireless/libertas/if_spi.c: In function ‘if_spi_c2h_data’: drivers/net/wireless/libertas/if_spi.c:733: warning: format ‘%u’ expects type ‘unsigned int’, but argument 4 has type ‘long unsigned int’ Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 4月, 2009 1 次提交
-
-
由 Alexander Beregalov 提交于
Fix this build error caused by 362b76ed "8390p: Get rid of init_module/cleanup_module" drivers/net/8390p.c:94:19: error: invalid suffix "p_init_module" on integer constant drivers/net/8390p.c:94: error: expected identifier or '(' before numeric constant drivers/net/8390p.c:99:20: error: invalid suffix "p_cleanup_module" on integer constant Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 4月, 2009 28 次提交
-
-
由 Ursula Braun 提交于
From: Ursula Braun <ubraun@linux.vnet.ibm.com> net/iucv/af_iucv.c in net-next-2.6 is almost correct. 4 lines should still be deleted. These are the remaining changes: Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Conflicts: net/iucv/af_iucv.c
-
由 Hendrik Brueckner 提交于
The SO_MSGLIMIT socket option modifies the message limit for new IUCV communication paths. The message limit specifies the maximum number of outstanding messages that are allowed for connections. This setting can be lowered by z/VM when an IUCV connection is established. Expects an integer value in the range of 1 to 65535. The default value is 65535. The message limit must be set before calling connect() or listen() for sockets. If sockets are already connected or in state listen, changing the message limit is not supported. For reading the message limit value, unconnected sockets return the limit that has been set or the default limit. For connected sockets, the actual message limit is returned. The actual message limit is assigned by z/VM for each connection and it depends on IUCV MSGLIMIT authorizations specified for the z/VM guest virtual machine. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hendrik Brueckner 提交于
If the skb cannot be copied to user iovec, always return -EFAULT. The skb is enqueued again, except MSG_PEEK flag is set, to allow user space applications to correct its iovec pointer. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hendrik Brueckner 提交于
This patch provides the socket type SOCK_SEQPACKET in addition to SOCK_STREAM. AF_IUCV sockets of type SOCK_SEQPACKET supports an 1:1 mapping of socket read or write operations to complete IUCV messages. Socket data or IUCV message data is not fragmented as this is the case for SOCK_STREAM sockets. The intention is to help application developers who write applications or device drivers using native IUCV interfaces (Linux kernel or z/VM IUCV interfaces). Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hendrik Brueckner 提交于
Allow 'classification' of socket data that is sent or received over an af_iucv socket. For classification of data, the target class of an (native) iucv message is used. This patch provides the cmsg interface for iucv_sock_recvmsg() and iucv_sock_sendmsg(). Applications can use the msg_control field of struct msghdr to set or get the target class as a "socket control message" (SCM/CMSG). Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hendrik Brueckner 提交于
The patch allows to send and receive data in the parameter list of an iucv message. The parameter list is an arry of 8 bytes that are used by af_iucv as follows: 0..6 7 bytes for socket data and 7 1 byte to store the data length. Instead of storing the data length directly, the difference between 0xFF and the data length is used. This convention does not interfere with the existing use of PRM messages for shutting down the send direction of an AF_IUCV socket (shutdown() operation). Data lenghts greater than 7 (or PRM message byte 8 is less than 0xF8) denotes to special messages. Currently, the special SEND_SHUTDOWN message is supported only. To use IPRM messages, both communicators must set the IUCV_IPRMDATA flag during path negotiation, i.e. in iucv_connect() and path_pending(). To be compatible to older af_iucv implementations, sending PRM messages is controlled by the socket option SO_IPRMDATA_MSG. Receiving PRM messages does not depend on the socket option (but requires the IUCV_IPRMDATA path flag to be set). Sending/Receiving data in the parameter list improves performance for small amounts of data by reducing message_completion() interrupts and memory copy operations. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hendrik Brueckner 提交于
Provide the socket operations getsocktopt() and setsockopt() to enable/disable sending of data in the parameter list of IUCV messages. The patch sets respective flag only. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hendrik Brueckner 提交于
If the af_iucv communication partner quiesces the path to shutdown its receive direction, provide a quiesce callback implementation to shutdown the (local) send direction. This ensures that both sides are synchronized. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Some of the IUCV commands can be invoked in interrupt context. Those commands need a different per-cpu IUCV command parameter block, otherwise they might overwrite an IUCV command parameter of a not yet finished IUCV command invocation in process context. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jouni Malinen 提交于
SME needs to be notified when the authentication or association attempt times out and MLME has stopped processing in order to allow the SME to decide what to do next. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The maximum sleep interval, for powersave purposes, is determined by the DTIM period (it may not be larger) and the required networking latency (it must be small enough to fulfil those constraints). This makes mac80211 calculate the maximum sleep interval based on those constraints, and pass it to the driver. Then the driver should instruct the device to sleep at most that long. Note that the device is responsible for aligning the maximum sleep interval between DTIMs, we make sure it's not longer but it needs to make sure it's between them. Also, group some powersave documentation together and make it more explicit that we support managed mode only, and no IBSS powersaving (yet). Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Make the JOIN_IBSS command look at the beacon interval attribute to see if the user requested a specific beacon interval, if not default to 100 TU (wext too). Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Just setting IEEE80211_CONF_CHANGE_PS should be sufficient for changes in the power saving things. The driver already tells us whether it wants notification of dynps via the "have dynps support" hw flag. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Reviewed-by: NKalle Valo <kalle.valo@iki.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Stephen Rothwell reported these warnings from a 32-bit build: net/mac80211/mlme.c:1771: warning: left shift count >= width of type net/mac80211/mlme.c:1772: warning: left shift count >= width of type net/mac80211/mlme.c:1773: warning: left shift count >= width of type net/mac80211/mlme.c:1774: warning: left shift count >= width of type net/mac80211/mlme.c:1775: warning: left shift count >= width of type This shows a bug in my code -- BIT(X) uses just "1 << X" which means a 32-bit integer on 32-bit platforms, but the code here needs a u64 on all platforms. Fix this by using "1ULL << X" instead of BIT(X). Thanks Stephen! Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jussi Kivilinna 提交于
Private structure is allocated by wiphy_new now, so use wiphy_free instead of kfree. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jussi Kivilinna 提交于
rndis_wext_link_change() might be called from rndis_command() at initialization stage and priv->workqueue/priv->work have not been initialized yet. This causes invalid opcode at rndis_wext_bind on some brands of bcm4320. Fix by initializing workqueue/workers in rndis_wext_bind() before rndis_command is used. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
sparse complains, correctly, about these: drivers/net/wireless/rndis_wlan.c:418:21: warning: symbol 'rndis_config_ops' was not declared. Should it be static? drivers/net/wireless/rndis_wlan.c:423:6: warning: symbol 'rndis_wiphy_privid' was not declared. Should it be static? Fix that. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
With the RCU locking here we sleep while in an atomic context, since we can sleep just use mutex locking for the interface list instead of RCU. Sorry, seems I didn't get that in my UML test. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohamed Abbas 提交于
Allow user to config the device all the time but only allow commiting these changes to card if the card is up and running. Signed-off-by: NMohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Patch removes the "manual radio disable" parameter as there is no usage scenario of disabling radio using this module parameter. User can use iwconfig's txpower to enable and disable radio. This module parameter also does not work as expected. During module load the status of radio is set, the radio is not actually disabled. Even so, the moment mac80211 requests the interface to be up the radio will be enabled again. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohamed Abbas 提交于
Function rs_stay_in_table was flushing the rate scale table way to early. time_after macro in expecting long value and was failing because we passing u32 value. Signed-off-by: NMohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
This patch clean up the code for NL80211_IFTYPE_MONITOR mode, priv->iw_mode is set in add_interface, but add_interface is never called for monitor mode. The only way mac80211 informs us about monitor mode is through configuring filter; since iw_mode will never set to NL80211_IFTYPE_MONITOR, modify and remove all the code refer to NL80211_IFTYPE_MONITOR and replace with iwl_is_monitor_mode() function call. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
This patch calculates interrupt statistics for debugfs. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Patch adds debugfs to 3945. Also fix debugfs registration in iwlagn to return error code if it fails. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
If passive scanning is requested we should not ask the microcode to do active scanning after detecting traffic on a channel -- that should only be used when an active scan is requested but some channels are marked passive. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This modifies iwlwifi to * no longer build its own probe request, but use mac80211's * therefore, support arbitrary scan IEs (up to the max len) * support multiple scan SSIDs * support passive scanning Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-