提交 09f9bf79 编写于 作者: A Abhijeet Kolekar 提交者: John W. Linville

iwlwifi: remove radio disable parameter.

Patch removes the "manual radio disable" parameter
as there is no usage scenario of disabling radio using this module parameter.
User can use iwconfig's txpower to enable and disable radio.

This module parameter also does not work as expected. During module load
the status of radio is set, the radio is not actually disabled. Even so,
the moment mac80211 requests the interface to be up the radio will be
enabled again.
Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 447fee70
......@@ -2361,8 +2361,6 @@ MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX));
module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444);
MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
module_param_named(disable, iwl4965_mod_params.disable, int, 0444);
MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
module_param_named(debug, iwl4965_mod_params.debug, uint, 0444);
......
......@@ -1655,9 +1655,6 @@ struct iwl_cfg iwl5150_agn_cfg = {
MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX));
module_param_named(disable50, iwl50_mod_params.disable, int, 0444);
MODULE_PARM_DESC(disable50,
"manually disable the 50XX radio (default 0 [radio on])");
module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, 0444);
MODULE_PARM_DESC(swcrypto50,
"using software crypto engine (default 0 [hardware])\n");
......
......@@ -2774,18 +2774,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto out_free_eeprom;
/* At this point both hw and priv are initialized. */
/**********************************
* 7. Initialize module parameters
**********************************/
/* Disable radio (SW RF KILL) via parameter when loading driver */
if (priv->cfg->mod_params->disable) {
set_bit(STATUS_RF_KILL_SW, &priv->status);
IWL_DEBUG_INFO(priv, "Radio disabled.\n");
}
/********************
* 8. Setup services
* 7. Setup services
********************/
spin_lock_irqsave(&priv->lock, flags);
iwl_disable_interrupts(priv);
......@@ -2809,7 +2799,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
iwl_setup_rx_handlers(priv);
/**********************************
* 9. Setup and register mac80211
* 8. Setup and register mac80211
**********************************/
/* enable interrupts if needed: hw bug w/a */
......
......@@ -176,7 +176,6 @@ struct iwl_ops {
};
struct iwl_mod_params {
int disable; /* def: 0 = enable radio */
int sw_crypto; /* def: 0 = using hardware encryption */
u32 debug; /* def: 0 = minimal debug log messages */
int disable_hw_scan; /* def: 0 = use h/w scan */
......
......@@ -4309,20 +4309,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s\n",
priv->cfg->name);
/***********************************
* 7. Initialize Module Parameters
* **********************************/
/* Initialize module parameter values here */
/* Disable radio (SW RF KILL) via parameter when loading driver */
if (iwl3945_mod_params.disable) {
set_bit(STATUS_RF_KILL_SW, &priv->status);
IWL_DEBUG_INFO(priv, "Radio disabled.\n");
}
/***********************
* 8. Setup Services
* 7. Setup Services
* ********************/
spin_lock_irqsave(&priv->lock, flags);
......@@ -4350,7 +4338,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
iwl3945_setup_rx_handlers(priv);
/*********************************
* 9. Setup and Register mac80211
* 8. Setup and Register mac80211
* *******************************/
iwl_enable_interrupts(priv);
......@@ -4528,8 +4516,6 @@ MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX));
module_param_named(antenna, iwl3945_mod_params.antenna, int, 0444);
MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
module_param_named(disable, iwl3945_mod_params.disable, int, 0444);
MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, 0444);
MODULE_PARM_DESC(swcrypto,
"using software crypto (default 1 [software])\n");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册