- 13 1月, 2016 1 次提交
-
-
由 Russell Currey 提交于
The recently added OPAL API call, OPAL_CONSOLE_FLUSH, originally took no parameters and returned nothing. The call was updated to accept the terminal number to flush, and returned various values depending on the state of the output buffer. The prototype has been updated and its usage in the OPAL kmsg dumper has been modified to support its new behaviour as an incremental flush. Signed-off-by: NRussell Currey <ruscur@russell.cc> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 27 12月, 2015 1 次提交
-
-
由 Russell Currey 提交于
On BMC machines, console output is controlled by the OPAL firmware and is only flushed when its pollers are called. When the kernel is in a panic state, it no longer calls these pollers and thus console output does not completely flush, causing some output from the panic to be lost. Output is only actually lost when the kernel is configured to not power off or reboot after panic (i.e. CONFIG_PANIC_TIMEOUT is set to 0) since OPAL flushes the console buffer as part of its power down routines. Before this patch, however, only partial output would be printed during the timeout wait. This patch adds a new kmsg_dumper which gets called at panic time to ensure panic output is not lost. It accomplishes this by calling OPAL_CONSOLE_FLUSH in the OPAL API, and if that is not available, the pollers are called enough times to (hopefully) completely flush the buffer. The flushing mechanism will only affect output printed at and before the kmsg_dump call in kernel/panic.c:panic(). As such, the "end Kernel panic" message may still be truncated as follows: >Call Trace: >[c000000f1f603b00] [c0000000008e9458] dump_stack+0x90/0xbc (unreliable) >[c000000f1f603b30] [c0000000008e7e78] panic+0xf8/0x2c4 >[c000000f1f603bc0] [c000000000be4860] mount_block_root+0x288/0x33c >[c000000f1f603c80] [c000000000be4d14] prepare_namespace+0x1f4/0x254 >[c000000f1f603d00] [c000000000be43e8] kernel_init_freeable+0x318/0x350 >[c000000f1f603dc0] [c00000000000bd74] kernel_init+0x24/0x130 >[c000000f1f603e30] [c0000000000095b0] ret_from_kernel_thread+0x5c/0xac >---[ end Kernel panic - not This functionality is implemented as a kmsg_dumper as it seems to be the most sensible way to introduce platform-specific functionality to the panic function. Signed-off-by: NRussell Currey <ruscur@russell.cc> Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 20 8月, 2015 1 次提交
-
-
由 Anshuman Khandual 提交于
This patch registers the following two new OPAL interfaces calls for the platform LED subsystem. With the help of these new OPAL calls, the kernel will be able to get or set the state of various individual LEDs on the system at any given location code which is passed through the LED specific device tree nodes. (1) OPAL_LEDS_GET_INDICATOR opal_leds_get_ind (2) OPAL_LEDS_SET_INDICATOR opal_leds_set_ind Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com> Acked-by: NStewart Smith <stewart@linux.vnet.ibm.com> Tested-by: NStewart Smith <stewart@linux.vnet.ibm.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 06 8月, 2015 1 次提交
-
-
由 Mahesh Salgaonkar 提交于
On non-recoverable MCE errors in kernel space, Linux kernel panics and system reboots. On BMC based system opal-prd runs as a daemon in the host. Hence, kernel crash may prevent opal-prd to detect and analyze this MCE error. This may land us in a situation where the faulty memory never gets de-configured and Linux would keep hitting same MCE error again and again. If this happens in early stage of kernel initialization, then Linux will keep crashing and rebooting in a loop. This patch fixes this issue by invoking new opal_cec_reboot2() call with reboot type OPAL_REBOOT_PLATFORM_ERROR to inform BMC/OCC about this error, so that BMC can collect relevant data for error analysis and decide what component to de-configure before rebooting. This patch is dependent on OPAL patchset posted on skiboot mailing list at https://lists.ozlabs.org/pipermail/skiboot/2015-July/001771.html that introduces opal_cec_reboot2() opal call. Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 16 7月, 2015 1 次提交
-
-
由 Vipin K Parashar 提交于
This patch adds support for OPAL EPOW (Environmental and Power Warnings) and DPO (Delayed Power Off) events for the PowerNV platform. These events are generated on FSP (Flexible Service Processor) based systems. EPOW events are generated due to various critical system conditions that require system shutdown. A few examples of these conditions are high ambient temperature or system running on UPS power with low UPS battery. DPO event is generated in response to admin initiated system shutdown request. Upon receipt of EPOW and DPO events the host kernel invokes orderly_poweroff() for performing graceful system shutdown. Signed-off-by: NVipin K Parashar <vipin@linux.vnet.ibm.com> Acked-by: NVaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 05 6月, 2015 1 次提交
-
-
由 Jeremy Kerr 提交于
This change adds a char device to access the "PRD" (processor runtime diagnostics) channel to OPAL firmware. Includes contributions from Vaidyanathan Srinivasan, Neelesh Gupta & Vishal Kulkarni. Signed-off-by: NNeelesh Gupta <neelegup@linux.vnet.ibm.com> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Acked-by: NStewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 22 5月, 2015 3 次提交
-
-
由 Alistair Popple 提交于
Whenever an interrupt is received for opal the linux kernel gets a bitfield indicating certain events that have occurred and need handling by the various device drivers. Currently this is handled using a notifier interface where we call every device driver that has registered to receive opal events. This approach has several drawbacks. For example each driver has to do its own checking to see if the event is relevant as well as event masking. There is also no easy method of recording the number of times we receive particular events. This patch solves these issues by exposing opal events via the standard interrupt APIs by adding a new interrupt chip and domain. Drivers can then register for the appropriate events using standard kernel calls such as irq_of_parse_and_map(). Signed-off-by: NAlistair Popple <alistair@popple.id.au> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Alistair Popple 提交于
Most of the OPAL subsystems are always compiled in for PowerNV and many of them need to be initialised before or after other OPAL subsystems. Rather than trying to control this ordering through machine initcalls it is clearer and easier to control initialisation order with explicit calls in opal_init. Signed-off-by: NAlistair Popple <alistair@popple.id.au> Cc: Mahesh Jagannath Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Shreyas B. Prabhu 提交于
Fastsleep is one of the idle state which cpuidle subsystem currently uses on power8 machines. In this state L2 cache is brought down to a threshold voltage. Therefore when the core is in fastsleep, the communication between L2 and L3 needs to be fenced. But there is a bug in the current power8 chips surrounding this fencing. OPAL provides a workaround which precludes the possibility of hitting this bug. But running with this workaround applied causes checkstop if any correctable error in L2 cache directory is detected. Hence OPAL also provides a way to undo the workaround. In the existing implementation, workaround is applied by the last thread of the core entering fastsleep and undone by the first thread waking up. But this has a performance cost. These OPAL calls account for roughly 4000 cycles everytime the core has to enter or wakeup from fastsleep. This patch introduces a sysfs attribute (fastsleep_workaround_applyonce) to choose the behavior of this workaround. By default, fastsleep_workaround_applyonce = 0. In this case, workaround is applied/undone everytime the core enters/exits fastsleep. fastsleep_workaround_applyonce = 1. In this case the workaround is applied once on all the cores and never undone. This can be triggered by echo 1 > /sys/devices/system/cpu/fastsleep_workaround_applyonce For simplicity this attribute can be modified only once. Implying, once fastsleep_workaround_applyonce is changed to 1, it cannot be reverted to the default state. Signed-off-by: NShreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 11 4月, 2015 1 次提交
-
-
由 Cyril Bur 提交于
This change adds the OPAL interface definitions to allow Linux to read, write and erase from system flash devices. We register platform devices for the flash devices exported by firmware. We clash with the existing opal_flash_init function, which is really for the FSP flash update functionality, so we rename that initcall to opal_flash_update_init(). A future change will add an mtd driver that uses this interface. Changes from Joel Stanley and Jeremy Kerr. Signed-off-by: NCyril Bur <cyrilbur@gmail.com> Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NJoel Stanley <joel@jms.id.au> Acked-by: NStewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 31 3月, 2015 1 次提交
-
-
由 Cédric Le Goater 提交于
OPAL has its own list of return codes. The patch provides a translation of such codes in errnos for the opal_sensor_read call, and possibly others if needed. Signed-off-by: NCédric Le Goater <clg@fr.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 25 3月, 2015 1 次提交
-
-
由 Neelesh Gupta 提交于
Provide an unregister interface for the opal message notifiers to be called when not needed like during driver unload/remove. Signed-off-by: NNeelesh Gupta <neelegup@linux.vnet.ibm.com> Reviewed-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 16 3月, 2015 2 次提交
-
-
由 Michael Ellerman 提交于
This commit gets opal-api.h to mostly match the version in Skiboot as of commit ea7d806ab0ba. The exceptions are things which are not (currently) used in Linux. Most of this is just whitespace and a few things moving around. I think the diff is readable. Also OpalMessageType became opal_msg_type, requiring a change in the Linux code. Finally Skiboot and Linux disagree on CAPI vs CXL, because CAPI means something else in Linux. To handle that we just point the Linux wrapper, which is named "cxl" to the OPAL token OPAL_PCI_SET_PHB_CAPI_MODE. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NStewart Smith <stewart@linux.vnet.ibm.com>
-
由 Michael Ellerman 提交于
We'd like to get to the stage where the OPAL API is defined in a header that is identical between Linux and Skiboot. As step one, split the bits that actually define the API into opal-api.h. The Linux specific parts stay in opal.h. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Acked-by: NStewart Smith <stewart@linux.vnet.ibm.com>
-
- 04 2月, 2015 1 次提交
-
-
由 Joel Stanley 提交于
Register a notifier for a OPAL message indicating that the machine should prepare itself for a graceful power off. OPAL will tell us if the power off is a reboot or shutdown, but for now we perform the same orderly_poweroff action. Signed-off-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 22 1月, 2015 1 次提交
-
-
由 Ryan Grimm 提交于
Turning snoops on is the last step in CAPP recovery. Sapphire is expected to have reinitialized the PHB and done the previous recovery steps. Add mode argument to opal call to do this. Driver can turn snoops off although it does not currently. Signed-off-by: NRyan Grimm <grimm@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 15 12月, 2014 3 次提交
-
-
由 Shreyas B. Prabhu 提交于
Winkle is a deep idle state supported in power8 chips. A core enters winkle when all the threads of the core enter winkle. In this state power supply to the entire chiplet i.e core, private L2 and private L3 is turned off. As a result it gives higher powersavings compared to sleep. But entering winkle results in a total hypervisor state loss. Hence the hypervisor context has to be preserved before entering winkle and restored upon wake up. Power-on Reset Engine (PORE) is a dedicated engine which is responsible for powering on the chiplet during wake up. It can be programmed to restore the register contests of a few specific registers. This patch uses PORE to restore register state wherever possible and uses stack to save and restore rest of the necessary registers. With hypervisor state restore things fall under three categories- per-core state, per-subcore state and per-thread state. To manage this, extend the infrastructure introduced for sleep. Mainly we add a paca variable subcore_sibling_mask. Using this and the core_idle_state we can distingush first thread in core and subcore. Signed-off-by: NShreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Shreyas B. Prabhu 提交于
Deep idle states like sleep and winkle are per core idle states. A core enters these states only when all the threads enter either the particular idle state or a deeper one. There are tasks like fastsleep hardware bug workaround and hypervisor core state save which have to be done only by the last thread of the core entering deep idle state and similarly tasks like timebase resync, hypervisor core register restore that have to be done only by the first thread waking up from these state. The current idle state management does not have a way to distinguish the first/last thread of the core waking/entering idle states. Tasks like timebase resync are done for all the threads. This is not only is suboptimal, but can cause functionality issues when subcores and kvm is involved. This patch adds the necessary infrastructure to track idle states of threads in a per-core structure. It uses this info to perform tasks like fastsleep workaround and timebase resync only once per core. Signed-off-by: NShreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Originally-by: NPreeti U. Murthy <preeti@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Shreyas B. Prabhu 提交于
The secondary threads should enter deep idle states so as to gain maximum powersavings when the entire core is offline. To do so the offline path must be made aware of the available deepest idle state. Hence probe the device tree for the possible idle states in powernv core code and expose the deepest idle state through flags. Since the device tree is probed by the cpuidle driver as well, move the parameters required to discover the idle states into an appropriate common place to both the driver and the powernv core code. Another point is that fastsleep idle state may require workarounds in the kernel to function properly. This workaround is introduced in the subsequent patches. However neither the cpuidle driver or the hotplug path need be bothered about this workaround. They will be taken care of by the core powernv code. Originally-by: NSrivatsa S. Bhat <srivatsa@mit.edu> Signed-off-by: NPreeti U. Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: NShreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: NPaul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 14 12月, 2014 1 次提交
-
-
由 Neelesh Gupta 提交于
The patch exposes the available i2c busses on the PowerNV platform to the kernel and implements the bus driver to support i2c and smbus commands. The driver uses the platform device infrastructure to probe the busses on the platform and registers them with the i2c driver framework. Signed-off-by: NNeelesh Gupta <neelegup@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> (I2C part, excluding the bindings) Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 02 12月, 2014 1 次提交
-
-
由 Mahesh Salgaonkar 提交于
Cleanup OpalMCE_* definitions/declarations and other related code which is not used anymore. Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: NBenjamin Herrrenschmidt <benh@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 17 11月, 2014 1 次提交
-
-
由 Neelesh Gupta 提交于
The patch implements the OPAL rtc driver that binds with the rtc driver subsystem. The driver uses the platform device infrastructure to probe the rtc device and register it to rtc class framework. The 'wakeup' is supported depending upon the property 'has-tpo' present in the OF node. It provides a way to load the generic rtc driver in in the absence of an OPAL driver. The patch also moves the existing OPAL rtc get/set time interfaces to the new driver and exposes the necessary OPAL calls using EXPORT_SYMBOL_GPL. Test results: ------------- Host: [root@tul169p1 ~]# ls -l /sys/class/rtc/ total 0 lrwxrwxrwx 1 root root 0 Oct 14 03:07 rtc0 -> ../../devices/opal-rtc/rtc/rtc0 [root@tul169p1 ~]# cat /sys/devices/opal-rtc/rtc/rtc0/time 08:10:07 [root@tul169p1 ~]# echo `date '+%s' -d '+ 2 minutes'` > /sys/class/rtc/rtc0/wakealarm [root@tul169p1 ~]# cat /sys/class/rtc/rtc0/wakealarm 1413274345 [root@tul169p1 ~]# FSP: $ smgr mfgState standby $ rtim timeofday System time is valid: 2014/10/14 08:12:04.225115 $ smgr mfgState ipling $ CC: devicetree@vger.kernel.org CC: tglx@linutronix.de CC: rtc-linux@googlegroups.com CC: a.zummo@towertech.it Signed-off-by: NNeelesh Gupta <neelegup@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 12 11月, 2014 1 次提交
-
-
由 Jeremy Kerr 提交于
Recent OPAL firmare adds a couple of functions to send and receive IPMI messages: https://github.com/open-power/skiboot/commit/b2a374da This change updates the token list and wrappers to suit, and adds the platform devices for any IPMI interfaces. Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 08 10月, 2014 1 次提交
-
-
由 Ian Munsie 提交于
This adds the OPAL call to change a PHB into cxl mode. Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 30 9月, 2014 2 次提交
-
-
由 Gavin Shan 提交于
The names of PCI reset scopes aren't sychronized with firmware. The patch fixes it. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
The patch synchronizes firmware header file (opal.h) for PCI error injection. Signed-off-by: NMike Qiu <qiudayu@linux.vnet.ibm.com> Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 25 9月, 2014 1 次提交
-
-
由 Michael Neuling 提交于
Currently there is no way to generically check if an OPAL call exists or not from the host kernel. This adds an OPAL call opal_check_token() which tells you if the given token is present in OPAL or not. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 13 8月, 2014 1 次提交
-
-
由 Vasant Hegde 提交于
PowerNV platform is capable of capturing host memory region when system crashes (because of host/firmware). We have new OPAL API to register/ unregister memory region to be captured when system crashes. This patch adds support for new API. Also during boot time we register kernel log buffer and unregister before doing kexec. Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 05 8月, 2014 5 次提交
-
-
由 Mahesh Salgaonkar 提交于
When we hit the HMI in Linux, invoke opal call to handle/recover from HMI errors in real mode and then in virtual mode during check_irq_replay() invoke opal_poll_events()/opal_do_notifier() to retrieve HMI event from OPAL and act accordingly. Now that we are ready to handle HMI interrupt directly in linux, remove the HMI interrupt registration with firmware. Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mahesh Salgaonkar 提交于
Handle Hypervisor Maintenance Interrupt (HMI) in Linux. This patch implements basic infrastructure to handle HMI in Linux host. The design is to invoke opal handle hmi in real mode for recovery and set irq_pending when we hit HMI. During check_irq_replay pull opal hmi event and print hmi info on console. Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch synchronizes header file with firmware to have new OPAL API opal_pci_eeh_freeze_set(), which is used to freeze the specified PE in order to support "compound" PE. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Guo Chao 提交于
This patch enables M64 aperatus for PHB3. We already had platform hook (ppc_md.pcibios_window_alignment) to affect the PCI resource assignment done in PCI core so that each PE's M32 resource was built on basis of M32 segment size. Similarly, we're using that for M64 assignment on basis of M64 segment size. * We're using last M64 BAR to cover M64 aperatus, and it's shared by all 256 PEs. * We don't support P7IOC yet. However, some function callbacks are added to (struct pnv_phb) so that we can reuse them on P7IOC in future. * PE, corresponding to PCI bus with large M64 BAR device attached, might span multiple M64 segments. We introduce "compound" PE to cover the case. The compound PE is a list of PEs and the master PE is used as before. The slave PEs are just for MMIO isolation. Signed-off-by: NGuo Chao <yan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
It's followup of commit ddf0322a ("powerpc/powernv: Fix endianness problems in EEH"). The patch helps to get non-endian-dependent diag-data. Cc: Guo Chao <yan@linux.vnet.ibm.com> Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 25 6月, 2014 1 次提交
-
-
由 Michael Ellerman 提交于
In commit 27f44888 "Add OPAL takeover from PowerVM" we added support for "takeover" on OPAL v1 machines. This was a mode of operation where we would boot under pHyp, and query for the presence of OPAL. If detected we would then do a special sequence to take over the machine, and the kernel would end up running in hypervisor mode. OPAL v1 was never a supported product, and was never shipped outside IBM. As far as we know no one is still using it. Newer versions of OPAL do not use the takeover mechanism. Although the query for OPAL should be harmless on machines with newer OPAL, we have seen a machine where it causes a crash in Open Firmware. The code in early_init_devtree() to copy boot_command_line into cmd_line was added in commit 817c21ad "Get kernel command line accross OPAL takeover", and AFAIK is only used by takeover, so should also be removed. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 11 6月, 2014 1 次提交
-
-
由 Guo Chao 提交于
EEH information fetched from OPAL need fix before using in LE environment. To be included in sparse's endian check, declare them as __beXX and access them by accessors. Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NGuo Chao <yan@linux.vnet.ibm.com> Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 05 6月, 2014 2 次提交
-
-
由 Anton Blanchard 提交于
struct OpalMemoryErrorData is passed to us from firmware, so we have to byteswap it. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
When running as a powernv "host" system on P8, we need to switch the endianness of interrupt handlers. This does it via the appropriate call to the OPAL firmware which may result in just switching HID0:HILE but depending on the processor version might need to do a few more things. This call must be done early before any other processor has been brought out of firmware. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndy Whitcroft <apw@canonical.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 28 4月, 2014 3 次提交
-
-
由 Vasant Hegde 提交于
Firmware update on PowerNV platform takes several minutes. During this time one CPU is stuck in FW and the kernel complains about "soft lockups". This patch returns all secondary CPUs to firmware before starting firmware update process. [ Reworked a bit and cleaned up -- BenH ] Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
We have two copies of code that creates an OPAL sg list. Consolidate these into a common set of helpers and fix the endian issues. The flash interface embedded a version number in the num_entries field, whereas the dump interface did did not. Since versioning wasn't added to the flash interface and it is impossible to add this in a backwards compatible way, just remove it. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-