- 11 7月, 2012 1 次提交
-
-
由 Andreas Schwab 提交于
The i2c-powermac driver now creates the i2c devices properly from the device-tree, including workarounds for broken or missing device-tree bits, so let's just use the normal probe methods and get rid of the hand made device creation code. Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 27 1月, 2012 1 次提交
-
-
由 Axel Lin 提交于
This patch converts onyx and tas codec drivers to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 30 10月, 2011 1 次提交
-
-
由 Paul Bolle 提交于
config SND_AOA_TOPAZ has been commented out since it was added five years ago with commit f3d9478b ("[...] add snd-aoa"). There's no indication why it's commented out. It might as well be removed. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 12 9月, 2011 1 次提交
-
-
由 Axel Lin 提交于
The i2c core will clear the clientdata pointer automatically. We don't have to set the `data' field to NULL in remove() or if probe() failed anymore. Also remove a unneeded NULL checking for kfree. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Reviewed-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 8月, 2011 1 次提交
-
-
由 Julia Lawall 提交于
The label outnodev is only used when kzalloc has not yet taken place or has failed, so there is no need for the call for kfree under this label. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != kfree(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 6月, 2011 1 次提交
-
-
由 Joe Perches 提交于
Several fixes as well where the +1 was missing. Done via coccinelle scripts like: @@ struct resource *ptr; @@ - ptr->end - ptr->start + 1 + resource_size(ptr) and some grep and typing. Mostly uncompiled, no cross-compilers. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 27 4月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
These changes were incorrectly fixed by codespell. They were now manually corrected. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 13 12月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
flush_scheduled_work() is deprecated and scheduled to be removed. * cancel[_delayed]_work() + flush_scheduled_work() -> cancel[_delayed]_work_sync(). * wm8350, wm8753 and soc-core use custom code to cancel a delayed work, execute it immediately if it was pending and wait for its completion. This is equivalent to flush_delayed_work_sync(). Use it instead. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 12月, 2010 1 次提交
-
-
由 Axel Lin 提交于
It does not make sense to set clientdata to onyx in onyx_i2c_remove() as we are going to kfree onyx. What we really want here is i2c_set_clientdata(client, NULL); Since the i2c core will take care of it now, so this patch just removes it. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 8月, 2010 1 次提交
-
-
由 Grant Likely 提交于
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Reviewed-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 6月, 2010 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Grant patches added an of mach table to struct device_driver. However, while he changed the macio device code to use that, he left the match table pointer in struct macio_driver and didn't update drivers to use the "new" one, thus breaking the probing. This completes the change by moving all drivers to setup the "new" one, removing all traces of the old one, and while at it (since it changes the exact same locations), I also remove two other duplicates from struct driver which are the name and owner fields. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 22 5月, 2010 1 次提交
-
-
由 Grant Likely 提交于
By moving dma_mask into pdev_archdata, and adding archdata to struct of_device, it makes it possible to substitute of_device with struct platform_device, which is a stepping stone to removing the of_platform bus entirely. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 19 5月, 2010 1 次提交
-
-
由 Grant Likely 提交于
The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 07 4月, 2010 1 次提交
-
-
由 d binderman 提交于
Signed-off-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 29 1月, 2010 1 次提交
-
-
由 Grant Likely 提交于
In struct device_node, the phandle is named 'linux_phandle' for PowerPC and MicroBlaze, and 'node' for SPARC. There is no good reason for the difference, it is just an artifact of the code diverging over a couple of years. This patch renames both to simply .phandle. Note: the .node also existed in PowerPC/MicroBlaze, but the only user seems to be arch/powerpc/platforms/powermac/pfunc_core.c. It doesn't look like the assignment between .linux_phandle and .node is significantly different enough to warrant the separate code paths unless ibm,phandle properties actually appear in Apple device trees. I think it is safe to eliminate the old .node property and use phandle everywhere. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NDavid S. Miller <davem@davemloft.net> Tested-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 01 10月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The client->driver pointer can be NULL when i2c-device probing fails in i2c_new_device(). This patch adds the NULL checks for client->driver and return the error instead of blind assumption of driver availability. Reported-by: NTim Shepard <shep@alum.mit.edu> Cc: Jean Delvare <khali@linux-fr.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 7月, 2009 1 次提交
-
-
由 Julia Lawall 提交于
Check that the result of kzalloc is not NULL before a dereference. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 5月, 2009 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 4月, 2009 1 次提交
-
-
由 Jean Delvare 提交于
The legacy i2c binding model is going away soon, so convert the AOA codec drivers to the new model or they'll break. Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NJohannes Berg <johannes@sipsolutions.net> Tested-by: NAndreas Schwab <schwab@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 1月, 2009 2 次提交
-
-
由 Johannes Berg 提交于
Some machines have a master amp GPIO that needs to be toggled to get sound output, in addition to speaker/headphone/line-out amps. This makes snd-aoa handle it, if present in the device tree, thus making snd-aoa be able to output sound on PowerMac3,6, which was previously handled by snd-powermac which also doesn't use the master amp GPIO. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Johannes Berg 提交于
This patch changes snd-aoa to handle some older machines that are currently handled by snd-powermac. snd-aoa has a number of advantages though, notably it can autoload better and is generally a more modern driver. By hardcoding the accepted device-ids (last hunk of the patch) I'm trying to avoid regressions because this driver will otherwise load automatically and not let snd-powermac load. People who are unhappy with snd-powermac and have a device-id property in the device tree are encouraged to read this patch and make a patch to amend this as appropriate. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 1月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Convert from snd_card_new() to the new snd_card_create() function in other sound subdirectories. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 11月, 2008 1 次提交
-
-
由 Kay Sievers 提交于
[stripped sound/isa/* changes, replaced with the next patch -- tiwai] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 10月, 2008 2 次提交
-
-
由 Johannes Berg 提交于
This cleans up the apple onboard audio driver filenames. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Johannes Berg 提交于
We shouldn't modify a global variable here. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 8月, 2008 1 次提交
-
-
由 Roel Kluin 提交于
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 20 8月, 2008 1 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 27 5月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Convert menu in sound Kconfig files to menuconfig and if. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 2月, 2008 4 次提交
-
-
由 Takashi Iwai 提交于
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Set a proper error code in the error path of i2sbus_attach_codec(). Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Heikki Lindholm 提交于
The aoa driver is not specifying constraints on number of periods, and, it seems, it might end with a non-integer number, which it cannot deal with. Fix by adding a proper constraint. Signed-off-by: NHeikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Check the value ranges in ctl put callbacks properly in aoa drivers. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 16 10月, 2007 2 次提交
-
-
由 Takashi Iwai 提交于
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Stephen Rothwell 提交于
sound/aoa/codecs/snd-aoa-codec-tas.c:750: warning: 'tas_suspend' defined but not used sound/aoa/codecs/snd-aoa-codec-tas.c:760: warning: 'tas_resume' defined but not used Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 13 10月, 2007 1 次提交
-
-
由 Kay Sievers 提交于
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 7月, 2007 1 次提交
-
-
由 Yoann Padioleau 提交于
Parse error in ifdef or bad use of macro. Signed-off-by: NYoann Padioleau <padator@wanadoo.fr> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 11 5月, 2007 1 次提交
-
-
由 Johannes Berg 提交于
This patch changes snd-aoa-i2sbus to use MODULE_DEVICE_TABLE instead of a hardcoded MODULE_ALIAS. Thanks to Sylvain Munaut for pointing this out. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-