sound: Convert to menuconfig

Convert menu in sound Kconfig files to menuconfig and if.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sound/Kconfig

 # sound/Config.in
 #
 
-menu "Sound"
-	depends on HAS_IOMEM
-
-config SOUND
+menuconfig SOUND
 	tristate "Sound card support"
+	depends on HAS_IOMEM
 	help
 	  If you have a sound card in your computer, i.e. if it can say more
 	  than an occasional beep, say Y.  Be sure to have all the information
@@ -28,22 +26,22 @@ config SOUND
 	  and read <file:Documentation/sound/oss/README.modules>; the module
 	  will be called soundcore.
 
+if SOUND
+
 source "sound/oss/dmasound/Kconfig"
 
 if !M68K
 
-menu "Advanced Linux Sound Architecture"
-	depends on SOUND!=n
-
-config SND
+menuconfig SND
 	tristate "Advanced Linux Sound Architecture"
-	depends on SOUND
 	help
 	  Say 'Y' or 'M' to enable ALSA (Advanced Linux Sound Architecture),
 	  the new base sound system.
 
 	  For more information, see <http://www.alsa-project.org/>
 
+if SND
+
 source "sound/core/Kconfig"
 
 source "sound/drivers/Kconfig"
@@ -58,9 +56,7 @@ source "sound/aoa/Kconfig"
 
 source "sound/arm/Kconfig"
 
-if SPI
 source "sound/spi/Kconfig"
-endif
 
 source "sound/mips/Kconfig"
 
@@ -80,22 +76,20 @@ source "sound/parisc/Kconfig"
 
 source "sound/soc/Kconfig"
 
-endmenu
+endif # SND
 
-menu "Open Sound System"
-	depends on SOUND!=n
-
-config SOUND_PRIME
+menuconfig SOUND_PRIME
 	tristate "Open Sound System (DEPRECATED)"
-	depends on SOUND
 	help
 	  Say 'Y' or 'M' to enable Open Sound System drivers.
 
+if SOUND_PRIME
+
 source "sound/oss/Kconfig"
 
-endmenu
+endif # SOUND_PRIME
 
-endif
+endif # !M68K
 
 config AC97_BUS
 	tristate
@@ -105,4 +99,4 @@ config AC97_BUS
 	  sound although they're sharing the AC97 bus. Concerned drivers
 	  should "select" this.
 
-endmenu
+endif # SOUND

sound/aoa/Kconfig

-menu "Apple Onboard Audio driver"
-	depends on SND!=n && PPC_PMAC
-
-config SND_AOA
+menuconfig SND_AOA
 	tristate "Apple Onboard Audio driver"
-	depends on SND
+	depends on PPC_PMAC
 	select SND_PCM
 	---help---
 	This option enables the new driver for the various
 	Apple Onboard Audio components.
 
+if SND_AOA
+
 source "sound/aoa/fabrics/Kconfig"
 
 source "sound/aoa/codecs/Kconfig"
 
 source "sound/aoa/soundbus/Kconfig"
 
-endmenu
+endif	# SND_AOA

sound/aoa/codecs/Kconfig

 config SND_AOA_ONYX
 	tristate "support Onyx chip"
-	depends on SND_AOA
 	select I2C
 	select I2C_POWERMAC
 	---help---
@@ -10,7 +9,6 @@ config SND_AOA_ONYX
 
 #config SND_AOA_TOPAZ
 #	tristate "support Topaz chips"
-#	depends on SND_AOA
 #	---help---
 #	This option enables support for the Topaz (CS84xx)
 #	codec chips found in the latest Apple machines,
@@ -19,7 +17,6 @@ config SND_AOA_ONYX
 
 config SND_AOA_TAS
 	tristate "support TAS chips"
-	depends on SND_AOA
 	select I2C
 	select I2C_POWERMAC
 	---help---
@@ -29,7 +26,6 @@ config SND_AOA_TAS
 
 config SND_AOA_TOONIE
 	tristate "support Toonie chip"
-	depends on SND_AOA
 	---help---
 	This option enables support for the toonie codec
 	found in the Mac Mini. If you have a Mac Mini and

sound/aoa/fabrics/Kconfig

 config SND_AOA_FABRIC_LAYOUT
 	tristate "layout-id fabric"
-	depends on SND_AOA
 	select SND_AOA_SOUNDBUS
 	select SND_AOA_SOUNDBUS_I2S
 	---help---

sound/aoa/soundbus/Kconfig

 config SND_AOA_SOUNDBUS
 	tristate "Apple Soundbus support"
-	depends on SOUND
 	select SND_PCM
 	---help---
 	This option enables the generic driver for the soundbus

sound/arm/Kconfig

 # ALSA ARM drivers
 
-menu "ALSA ARM devices"
-	depends on SND!=n && ARM
+menuconfig SND_ARM
+	bool "ARM sound devices"
+	depends on ARM
+	default y
+	help
+	  Support for sound devices specific to ARM architectures.
+	  Drivers that are implemented on ASoC can be found in
+	  "ALSA for SoC audio support" section.
+
+if SND_ARM
 
 config SND_SA11XX_UDA1341
 	tristate "SA11xx UDA1341TS driver (iPaq H3600)"
-	depends on ARCH_SA1100 && SND && L3
+	depends on ARCH_SA1100 && L3
 	select SND_PCM
 	help
 	  Say Y here if you have a Compaq iPaq H3x00 handheld computer
@@ -16,7 +24,7 @@ config SND_SA11XX_UDA1341
 
 config SND_ARMAACI
 	tristate "ARM PrimeCell PL041 AC Link support"
-	depends on SND && ARM_AMBA
+	depends on ARM_AMBA
 	select SND_PCM
 	select SND_AC97_CODEC
 
@@ -26,11 +34,12 @@ config SND_PXA2XX_PCM
 
 config SND_PXA2XX_AC97
 	tristate "AC97 driver for the Intel PXA2xx chip"
-	depends on ARCH_PXA && SND
+	depends on ARCH_PXA
 	select SND_PXA2XX_PCM
 	select SND_AC97_CODEC
 	help
 	  Say Y or M if you want to support any AC97 codec attached to
 	  the PXA2xx AC97 interface.
 
-endmenu
+endif	# SND_ARM
+

sound/core/Kconfig

 # ALSA soundcard-configuration
 config SND_TIMER
 	tristate
-	depends on SND
 
 config SND_PCM
 	tristate
 	select SND_TIMER
-	depends on SND
 
 config SND_HWDEP
 	tristate
-	depends on SND
 
 config SND_RAWMIDI
 	tristate
-	depends on SND
 
 config SND_SEQUENCER
 	tristate "Sequencer support"
-	depends on SND
 	select SND_TIMER
 	help
 	  Say Y or M to enable MIDI sequencer and router support.  This
@@ -44,11 +39,9 @@ config SND_SEQ_DUMMY
 
 config SND_OSSEMUL
 	bool
-	depends on SND
 
 config SND_MIXER_OSS
 	tristate "OSS Mixer API"
-	depends on SND
 	select SND_OSSEMUL
 	help
 	  To enable OSS mixer API emulation (/dev/mixer*), say Y here
@@ -61,7 +54,6 @@ config SND_MIXER_OSS
 
 config SND_PCM_OSS
 	tristate "OSS PCM (digital audio) API"
-	depends on SND
 	select SND_OSSEMUL
 	select SND_PCM
 	help
@@ -84,7 +76,7 @@ config SND_PCM_OSS_PLUGINS
 
 config SND_SEQUENCER_OSS
 	bool "OSS Sequencer API"
-	depends on SND && SND_SEQUENCER
+	depends on SND_SEQUENCER
 	select SND_OSSEMUL
 	help
 	  Say Y here to enable OSS sequencer emulation (both
@@ -98,7 +90,7 @@ config SND_SEQUENCER_OSS
 
 config SND_RTCTIMER
 	tristate "RTC Timer support"
-	depends on SND && RTC
+	depends on RTC
 	select SND_TIMER
 	help
 	  Say Y here to enable RTC timer support for ALSA.  ALSA uses
@@ -123,7 +115,6 @@ config SND_SEQ_RTCTIMER_DEFAULT
 
 config SND_DYNAMIC_MINORS
 	bool "Dynamic device file minor numbers"
-	depends on SND
 	help
 	  If you say Y here, the minor numbers of ALSA device files in
 	  /dev/snd/ are allocated dynamically.  This allows you to have
@@ -134,7 +125,6 @@ config SND_DYNAMIC_MINORS
 
 config SND_SUPPORT_OLD_API
 	bool "Support old ALSA API"
-	depends on SND
 	default y
 	help
 	  Say Y here to support the obsolete ALSA PCM API (ver.0.9.0 rc3
@@ -142,7 +132,7 @@ config SND_SUPPORT_OLD_API
 
 config SND_VERBOSE_PROCFS
 	bool "Verbose procfs contents"
-	depends on SND && PROC_FS
+	depends on PROC_FS
 	default y
 	help
 	  Say Y here to include code for verbose procfs contents (provides
@@ -151,7 +141,6 @@ config SND_VERBOSE_PROCFS
 
 config SND_VERBOSE_PRINTK
 	bool "Verbose printk"
-	depends on SND
 	help
 	  Say Y here to enable verbose log messages.  These messages
 	  will help to identify source file and position containing
@@ -161,7 +150,6 @@ config SND_VERBOSE_PRINTK
 
 config SND_DEBUG
 	bool "Debug"
-	depends on SND
 	help
 	  Say Y here to enable ALSA debug code.
 
@@ -184,4 +172,3 @@ config SND_PCM_XRUN_DEBUG
 
 config SND_VMASTER
 	bool
-	depends on SND

sound/drivers/Kconfig

-# ALSA generic drivers
+config SND_MPU401_UART
+        tristate
+        select SND_RAWMIDI
 
-menu "Generic devices"
-	depends on SND!=n
+config SND_OPL3_LIB
+	tristate
+	select SND_TIMER
+	select SND_HWDEP
 
+config SND_OPL4_LIB
+	tristate
+	select SND_TIMER
+	select SND_HWDEP
+
+config SND_VX_LIB
+	tristate
+	select SND_HWDEP
+	select SND_PCM
+
+config SND_AC97_CODEC
+	tristate
+	select SND_PCM
+	select AC97_BUS
+	select SND_VMASTER
+
+menuconfig SND_DRIVERS
+	bool "Generic sound devices"
+	default y
+	help
+	  Support for generic sound devices.
+  
+if SND_DRIVERS
 
 config SND_PCSP
 	tristate "PC-Speaker support (READ HELP!)"
 	depends on PCSPKR_PLATFORM && X86_PC && HIGH_RES_TIMERS
 	depends on INPUT
 	depends on EXPERIMENTAL
-	depends on SND
 	select SND_PCM
 	help
 	  If you don't have a sound card in your computer, you can include a
@@ -35,34 +61,8 @@ config SND_PCSP
 	  Say M if you don't.
 	  Say Y only if you really know what you do.
 
-config SND_MPU401_UART
-        tristate
-        select SND_RAWMIDI
-
-config SND_OPL3_LIB
-	tristate
-	select SND_TIMER
-	select SND_HWDEP
-
-config SND_OPL4_LIB
-	tristate
-	select SND_TIMER
-	select SND_HWDEP
-
-config SND_VX_LIB
-	tristate
-	select SND_HWDEP
-	select SND_PCM
-
-config SND_AC97_CODEC
-	tristate
-	select SND_PCM
-	select AC97_BUS
-	select SND_VMASTER
-
 config SND_DUMMY
 	tristate "Dummy (/dev/null) soundcard"
-	depends on SND
 	select SND_PCM
 	help
 	  Say Y here to include the dummy driver.  This driver does
@@ -91,7 +91,6 @@ config SND_VIRMIDI
 
 config SND_MTPAV
 	tristate "MOTU MidiTimePiece AV multiport MIDI"
-	depends on SND
 	select SND_RAWMIDI
 	help
 	  To use a MOTU MidiTimePiece AV multiport MIDI adapter
@@ -103,7 +102,7 @@ config SND_MTPAV
 
 config SND_MTS64
 	tristate "ESI Miditerminal 4140 driver"
-	depends on SND && PARPORT
+	depends on PARPORT
 	select SND_RAWMIDI
 	help
 	  The ESI Miditerminal 4140 is a 4 In 4 Out MIDI Interface with 
@@ -116,7 +115,6 @@ config SND_MTS64
 
 config SND_SERIAL_U16550
 	tristate "UART16550 serial MIDI driver"
-	depends on SND
 	select SND_RAWMIDI
 	help
 	  To include support for MIDI serial port interfaces, say Y here
@@ -132,7 +130,6 @@ config SND_SERIAL_U16550
 
 config SND_MPU401
 	tristate "Generic MPU-401 UART driver"
-	depends on SND
 	select SND_MPU401_UART
 	help
 	  Say Y here to include support for MIDI ports compatible with
@@ -143,7 +140,7 @@ config SND_MPU401
 
 config SND_PORTMAN2X4
 	tristate "Portman 2x4 driver"
-	depends on SND && PARPORT
+	depends on PARPORT
 	select SND_RAWMIDI
 	help
 	  Say Y here to include support for Midiman Portman 2x4 parallel
@@ -154,7 +151,7 @@ config SND_PORTMAN2X4
 
 config SND_ML403_AC97CR
 	tristate "Xilinx ML403 AC97 Controller Reference"
-	depends on SND && XILINX_VIRTEX
+	depends on XILINX_VIRTEX
 	select SND_AC97_CODEC
 	help
 	  Say Y here to include support for the
@@ -164,4 +161,4 @@ config SND_ML403_AC97CR
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-ml403_ac97cr.
 
-endmenu
+endif	# SND_DRIVERS

sound/isa/Kconfig

@@ -21,12 +21,17 @@ config SND_SB16_DSP
         select SND_PCM
         select SND_SB_COMMON
 
-menu "ISA devices"
-	depends on SND!=n && ISA && ISA_DMA_API
+menuconfig SND_ISA
+	bool "ISA sound devices"
+	depends on ISA && ISA_DMA_API
+	default y
+	help
+	  Support for sound devices connected via the ISA bus.
+
+if SND_ISA
 
 config SND_ADLIB
 	tristate "AdLib FM card"
-	depends on SND
 	select SND_OPL3_LIB
 	help
 	  Say Y here to include support for AdLib FM cards.
@@ -36,7 +41,7 @@ config SND_ADLIB
 
 config SND_AD1816A
 	tristate "Analog Devices SoundPort AD1816A"
-	depends on SND && PNP && ISA
+	depends on PNP
 	select ISAPNP
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
@@ -50,7 +55,6 @@ config SND_AD1816A
 
 config SND_AD1848
 	tristate "Generic AD1848/CS4248 driver"
-	depends on SND
 	select SND_AD1848_LIB
 	help
 	  Say Y here to include support for AD1848 (Analog Devices) or
@@ -64,7 +68,7 @@ config SND_AD1848
 
 config SND_ALS100
 	tristate "Avance Logic ALS100/ALS120"
-	depends on SND && PNP && ISA
+	depends on PNP
 	select ISAPNP
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
@@ -78,7 +82,7 @@ config SND_ALS100
 
 config SND_AZT2320
 	tristate "Aztech Systems AZT2320"
-	depends on SND && PNP && ISA
+	depends on PNP
 	select ISAPNP
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
@@ -92,7 +96,6 @@ config SND_AZT2320
 
 config SND_CMI8330
 	tristate "C-Media CMI8330"
-	depends on SND
 	select SND_AD1848_LIB
 	select SND_SB16_DSP
 	help
@@ -104,7 +107,6 @@ config SND_CMI8330
 
 config SND_CS4231
 	tristate "Generic Cirrus Logic CS4231 driver"
-	depends on SND
 	select SND_MPU401_UART
 	select SND_CS4231_LIB
 	help
@@ -116,7 +118,6 @@ config SND_CS4231
 
 config SND_CS4232
 	tristate "Generic Cirrus Logic CS4232 driver"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_CS4231_LIB
@@ -129,7 +130,6 @@ config SND_CS4232
 
 config SND_CS4236
 	tristate "Generic Cirrus Logic CS4236+ driver"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_CS4231_LIB
@@ -142,7 +142,7 @@ config SND_CS4236
 
 config SND_DT019X
 	tristate "Diamond Technologies DT-019X, Avance Logic ALS-007"
-	depends on SND && PNP && ISA
+	depends on PNP
 	select ISAPNP
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
@@ -156,7 +156,7 @@ config SND_DT019X
 
 config SND_ES968
 	tristate "Generic ESS ES968 driver"
-	depends on SND && PNP && ISA
+	depends on PNP
 	select ISAPNP
 	select SND_MPU401_UART
 	select SND_SB8_DSP
@@ -168,7 +168,6 @@ config SND_ES968
 
 config SND_ES1688
 	tristate "Generic ESS ES688/ES1688 driver"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
@@ -181,7 +180,6 @@ config SND_ES1688
 
 config SND_ES18XX
 	tristate "Generic ESS ES18xx driver"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
@@ -193,7 +191,7 @@ config SND_ES18XX
 
 config SND_SC6000
 	tristate "Gallant SC-6000, Audio Excel DSP 16"
-	depends on SND && HAS_IOPORT
+	depends on HAS_IOPORT
 	select SND_AD1848_LIB
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
@@ -209,7 +207,6 @@ config SND_GUS_SYNTH
 
 config SND_GUSCLASSIC
 	tristate "Gravis UltraSound Classic"
-	depends on SND
 	select SND_RAWMIDI
 	select SND_PCM
 	select SND_GUS_SYNTH
@@ -222,7 +219,6 @@ config SND_GUSCLASSIC
 
 config SND_GUSEXTREME
 	tristate "Gravis UltraSound Extreme"
-	depends on SND
 	select SND_HWDEP
 	select SND_MPU401_UART
 	select SND_PCM
@@ -236,7 +232,6 @@ config SND_GUSEXTREME
 
 config SND_GUSMAX
 	tristate "Gravis UltraSound MAX"
-	depends on SND
 	select SND_RAWMIDI
 	select SND_CS4231_LIB
 	select SND_GUS_SYNTH
@@ -249,7 +244,7 @@ config SND_GUSMAX
 
 config SND_INTERWAVE
 	tristate "AMD InterWave, Gravis UltraSound PnP"
-	depends on SND && PNP && ISA
+	depends on PNP
 	select SND_RAWMIDI
 	select SND_CS4231_LIB
 	select SND_GUS_SYNTH
@@ -263,7 +258,7 @@ config SND_INTERWAVE
 
 config SND_INTERWAVE_STB
 	tristate "AMD InterWave + TEA6330T (UltraSound 32-Pro)"
-	depends on SND && PNP && ISA
+	depends on PNP
 	select SND_RAWMIDI
 	select SND_CS4231_LIB
 	select SND_GUS_SYNTH
@@ -277,7 +272,6 @@ config SND_INTERWAVE_STB
 
 config SND_OPL3SA2
 	tristate "Yamaha OPL3-SA2/SA3"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_CS4231_LIB
@@ -290,7 +284,6 @@ config SND_OPL3SA2
 
 config SND_OPTI92X_AD1848
 	tristate "OPTi 82C92x - AD1848"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_OPL4_LIB
 	select SND_MPU401_UART
@@ -304,7 +297,6 @@ config SND_OPTI92X_AD1848
 
 config SND_OPTI92X_CS4231
 	tristate "OPTi 82C92x - CS4231"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_OPL4_LIB
 	select SND_MPU401_UART
@@ -318,7 +310,6 @@ config SND_OPTI92X_CS4231
 
 config SND_OPTI93X
 	tristate "OPTi 82C93x"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
@@ -331,7 +322,6 @@ config SND_OPTI93X
 
 config SND_MIRO
 	tristate "Miro miroSOUND PCM1pro/PCM12/PCM20radio driver"
-	depends on SND
 	select SND_OPL4_LIB
 	select SND_CS4231_LIB
 	select SND_MPU401_UART
@@ -345,7 +335,6 @@ config SND_MIRO
 
 config SND_SB8
 	tristate "Sound Blaster 1.0/2.0/Pro (8-bit)"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_RAWMIDI
 	select SND_SB8_DSP
@@ -358,7 +347,6 @@ config SND_SB8
 
 config SND_SB16
 	tristate "Sound Blaster 16 (PnP)"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_SB16_DSP
@@ -371,7 +359,6 @@ config SND_SB16
 
 config SND_SBAWE
 	tristate "Sound Blaster AWE (32,64) (PnP)"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_SB16_DSP
@@ -402,7 +389,6 @@ config SND_SB16_CSP_FIRMWARE_IN_KERNEL
 
 config SND_SGALAXY
 	tristate "Aztech Sound Galaxy"
-	depends on SND
 	select SND_AD1848_LIB
 	help
 	  Say Y here to include support for Aztech Sound Galaxy
@@ -413,7 +399,6 @@ config SND_SGALAXY
 
 config SND_SSCAPE
 	tristate "Ensoniq SoundScape PnP driver"
-	depends on SND
 	select SND_HWDEP
 	select SND_MPU401_UART
 	select SND_CS4231_LIB
@@ -426,7 +411,6 @@ config SND_SSCAPE
 
 config SND_WAVEFRONT
 	tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)"
-	depends on SND
 	select FW_LOADER
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
@@ -448,4 +432,5 @@ config SND_WAVEFRONT_FIRMWARE_IN_KERNEL
 	  you need to install the firmware files from the
 	  alsa-firmware package.
 
-endmenu
+endif	# SND_ISA
+

sound/mips/Kconfig

 # ALSA MIPS drivers
 
-menu "ALSA MIPS devices"
-	depends on SND!=n && MIPS
+menuconfig SND_MIPS
+	bool "MIPS sound devices"
+	depends on MIPS
+	default y
+	help
+	  Support for sound devices of MIPS architectures.
+
+if SND_MIPS
 
 config SND_AU1X00
 	tristate "Au1x00 AC97 Port Driver"
-	depends on (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SND
+	depends on SOC_AU1000 || SOC_AU1100 || SOC_AU1500
 	select SND_PCM
 	select SND_AC97_CODEC
 	help
 	  ALSA Sound driver for the Au1x00's AC97 port.
 
-endmenu
+endif	# SND_MIPS
 

sound/parisc/Kconfig

 # ALSA PA-RISC drivers
 
-menu "GSC devices"
-	depends on SND!=n && GSC
+menuconfig SND_GSC
+	bool "GSC sound devices"
+	depends on GSC
+	default y
+	help
+	  Support for GSC sound devices on PA-RISC architectures.
+
+if SND_GSC
 
 config SND_HARMONY
 	tristate "Harmony/Vivace sound chip"
-	depends on SND
 	select SND_PCM
 	help
 	  Say 'Y' or 'M' to include support for the Harmony/Vivace sound
 	  chip found in most GSC-based PA-RISC workstations.  It's frequently
 	  provided as part of the Lasi multi-function IC.
 
-endmenu
+endif	# SND_GSC

sound/pci/Kconfig

 # ALSA PCI drivers
 
-menu "PCI devices"
-	depends on SND!=n && PCI
+menuconfig SND_PCI
+	bool "PCI sound devices"
+	depends on PCI
+	default y
+	help
+	  Support for sound devices connected via the PCI bus.
+
+if SND_PCI
 
 config SND_AD1889
 	tristate "Analog Devices AD1889"
-	depends on SND
 	select SND_AC97_CODEC
 	help
 	  Say Y here to include support for the integrated AC97 sound
@@ -17,7 +22,6 @@ config SND_AD1889
 
 config SND_ALS300
 	tristate "Avance Logic ALS300/ALS300+"
-	depends on SND
 	select SND_PCM
 	select SND_AC97_CODEC
 	select SND_OPL3_LIB
@@ -29,7 +33,7 @@ config SND_ALS300
 
 config SND_ALS4000
 	tristate "Avance Logic ALS4000"
-	depends on SND && ISA_DMA_API
+	depends on ISA_DMA_API
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
@@ -43,7 +47,6 @@ config SND_ALS4000
 
 config SND_ALI5451
 	tristate "ALi M5451 PCI Audio Controller"
-	depends on SND
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -57,7 +60,6 @@ config SND_ALI5451
 
 config SND_ATIIXP
 	tristate "ATI IXP AC97 Controller"
-	depends on SND
 	select SND_AC97_CODEC
 	help
 	  Say Y here to include support for the integrated AC97 sound
@@ -69,7 +71,6 @@ config SND_ATIIXP
 
 config SND_ATIIXP_MODEM
 	tristate "ATI IXP Modem"
-	depends on SND
 	select SND_AC97_CODEC
 	help
 	  Say Y here to include support for the integrated MC97 modem on
@@ -80,7 +81,6 @@ config SND_ATIIXP_MODEM
 
 config SND_AU8810
 	tristate "Aureal Advantage"
-	depends on SND
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -95,7 +95,6 @@ config SND_AU8810
 
 config SND_AU8820
 	tristate "Aureal Vortex"
-	depends on SND
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -109,7 +108,6 @@ config SND_AU8820
 
 config SND_AU8830
 	tristate "Aureal Vortex 2"
-	depends on SND
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -124,7 +122,6 @@ config SND_AU8830
 
 config SND_AW2
 	tristate "Emagic Audiowerk 2"
-	depends on SND
 	help
 	  Say Y here to include support for Emagic Audiowerk 2 soundcards.
 
@@ -139,7 +136,7 @@ config SND_AW2
 
 config SND_AZT3328
 	tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
-	depends on SND && EXPERIMENTAL
+	depends on EXPERIMENTAL
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
@@ -152,7 +149,6 @@ config SND_AZT3328
 
 config SND_BT87X
 	tristate "Bt87x Audio Capture"
-	depends on SND
 	select SND_PCM
 	help
 	  If you want to record audio from TV cards based on
@@ -174,7 +170,6 @@ config SND_BT87X_OVERCLOCK
 
 config SND_CA0106
 	tristate "SB Audigy LS / Live 24bit"
-	depends on SND
 	select SND_AC97_CODEC
 	select SND_RAWMIDI
 	select SND_VMASTER
@@ -187,7 +182,6 @@ config SND_CA0106
 
 config SND_CMIPCI
 	tristate "C-Media 8338, 8738, 8768, 8770"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_PCM
@@ -201,13 +195,11 @@ config SND_CMIPCI
 
 config SND_OXYGEN_LIB
         tristate
-	depends on SND
 	select SND_PCM
 	select SND_MPU401_UART
 
 config SND_OXYGEN
 	tristate "C-Media 8788 (Oxygen)"
-	depends on SND
 	select SND_OXYGEN_LIB
 	help
 	  Say Y here to include support for sound cards based on the
@@ -225,7 +217,6 @@ config SND_OXYGEN
 
 config SND_CS4281
 	tristate "Cirrus Logic (Sound Fusion) CS4281"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
@@ -237,7 +228,6 @@ config SND_CS4281
 
 config SND_CS46XX
 	tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
-	depends on SND
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	help
@@ -258,7 +248,7 @@ config SND_CS46XX_NEW_DSP
 
 config SND_CS5530
 	tristate "CS5530 Audio"
-	depends on SND && ISA_DMA_API
+	depends on ISA_DMA_API
 	select SND_SB16_DSP
 	help
 	  Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
@@ -268,7 +258,7 @@ config SND_CS5530
 
 config SND_CS5535AUDIO
 	tristate "CS5535/CS5536 Audio"
-	depends on SND && X86 && !X86_64
+	depends on X86 && !X86_64
 	select SND_PCM
 	select SND_AC97_CODEC
 	help
@@ -286,7 +276,6 @@ config SND_CS5535AUDIO
 
 config SND_DARLA20
 	tristate "(Echoaudio) Darla20"
-	depends on SND
 	select FW_LOADER
 	select SND_PCM
 	help
@@ -297,7 +286,6 @@ config SND_DARLA20
 
 config SND_GINA20
 	tristate "(Echoaudio) Gina20"
-	depends on SND
 	select FW_LOADER
 	select SND_PCM
 	help
@@ -308,7 +296,6 @@ config SND_GINA20
 
 config SND_LAYLA20
 	tristate "(Echoaudio) Layla20"
-	depends on SND
 	select FW_LOADER
 	select SND_RAWMIDI
 	select SND_PCM
@@ -320,7 +307,6 @@ config SND_LAYLA20
 
 config SND_DARLA24
 	tristate "(Echoaudio) Darla24"
-	depends on SND
 	select FW_LOADER
 	select SND_PCM
 	help
@@ -331,7 +317,6 @@ config SND_DARLA24
 
 config SND_GINA24
 	tristate "(Echoaudio) Gina24"
-	depends on SND
 	select FW_LOADER
 	select SND_PCM
 	help
@@ -342,7 +327,6 @@ config SND_GINA24
 
 config SND_LAYLA24
 	tristate "(Echoaudio) Layla24"
-	depends on SND
 	select FW_LOADER
 	select SND_RAWMIDI
 	select SND_PCM
@@ -354,7 +338,6 @@ config SND_LAYLA24
 
 config SND_MONA
 	tristate "(Echoaudio) Mona"
-	depends on SND
 	select FW_LOADER
 	select SND_RAWMIDI
 	select SND_PCM
@@ -366,7 +349,6 @@ config SND_MONA
 
 config SND_MIA
 	tristate "(Echoaudio) Mia"
-	depends on SND
 	select FW_LOADER
 	select SND_RAWMIDI
 	select SND_PCM
@@ -378,7 +360,6 @@ config SND_MIA
 
 config SND_ECHO3G
 	tristate "(Echoaudio) 3G cards"
-	depends on SND
 	select FW_LOADER
 	select SND_RAWMIDI
 	select SND_PCM
@@ -390,7 +371,6 @@ config SND_ECHO3G
 
 config SND_INDIGO
 	tristate "(Echoaudio) Indigo"
-	depends on SND
 	select FW_LOADER
 	select SND_PCM
 	help
@@ -401,7 +381,6 @@ config SND_INDIGO
 
 config SND_INDIGOIO
 	tristate "(Echoaudio) Indigo IO"
-	depends on SND
 	select FW_LOADER
 	select SND_PCM
 	help
@@ -412,7 +391,6 @@ config SND_INDIGOIO
 
 config SND_INDIGODJ
 	tristate "(Echoaudio) Indigo DJ"
-	depends on SND
 	select FW_LOADER
 	select SND_PCM
 	help
@@ -423,7 +401,6 @@ config SND_INDIGODJ
 
 config SND_EMU10K1
 	tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
-	depends on SND
 	select FW_LOADER
 	select SND_HWDEP
 	select SND_RAWMIDI
@@ -441,7 +418,6 @@ config SND_EMU10K1
 
 config SND_EMU10K1X
 	tristate "Emu10k1X (Dell OEM Version)"
-	depends on SND
 	select SND_AC97_CODEC
 	select SND_RAWMIDI
 	help
@@ -453,7 +429,6 @@ config SND_EMU10K1X
 
 config SND_ENS1370
 	tristate "(Creative) Ensoniq AudioPCI 1370"
-	depends on SND
 	select SND_RAWMIDI
 	select SND_PCM
 	help
@@ -464,7 +439,6 @@ config SND_ENS1370
 
 config SND_ENS1371
 	tristate "(Creative) Ensoniq AudioPCI 1371/1373"
-	depends on SND
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	help
@@ -476,7 +450,6 @@ config SND_ENS1371
 
 config SND_ES1938
 	tristate "ESS ES1938/1946/1969 (Solo-1)"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
@@ -489,7 +462,6 @@ config SND_ES1938
 
 config SND_ES1968
 	tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
-	depends on SND
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -501,7 +473,6 @@ config SND_ES1968
 
 config SND_FM801
 	tristate "ForteMedia FM801"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
@@ -528,7 +499,6 @@ config SND_FM801_TEA575X
 
 config SND_HDA_INTEL
 	tristate "Intel HD Audio"
-	depends on SND
 	select SND_PCM
 	select SND_VMASTER
 	help
@@ -637,7 +607,6 @@ config SND_HDA_POWER_SAVE_DEFAULT
 
 config SND_HDSP
 	tristate "RME Hammerfall DSP Audio"
-	depends on SND
 	select SND_HWDEP
 	select SND_RAWMIDI
 	select SND_PCM
@@ -650,7 +619,6 @@ config SND_HDSP
 
 config SND_HDSPM
 	tristate "RME Hammerfall DSP MADI"
-	depends on SND
 	select SND_HWDEP
 	select SND_RAWMIDI
 	select SND_PCM
@@ -663,7 +631,6 @@ config SND_HDSPM
 
 config SND_HIFIER
 	tristate "TempoTec HiFier Fantasia"
-	depends on SND
 	select SND_OXYGEN_LIB
 	help
 	  Say Y here to include support for the MediaTek/TempoTec HiFier
@@ -674,7 +641,6 @@ config SND_HIFIER
 
 config SND_ICE1712
 	tristate "ICEnsemble ICE1712 (Envy24)"
-	depends on SND
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -691,7 +657,6 @@ config SND_ICE1712
 
 config SND_ICE1724
 	tristate "ICE/VT1724/1720 (Envy24HT/PT)"
-	depends on SND
 	select SND_RAWMIDI
 	select SND_AC97_CODEC
 	select SND_VMASTER
@@ -709,7 +674,6 @@ config SND_ICE1724
 
 config SND_INTEL8X0
 	tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller"
-	depends on SND
 	select SND_AC97_CODEC
 	help
 	  Say Y here to include support for the integrated AC97 sound
@@ -722,7 +686,6 @@ config SND_INTEL8X0
 
 config SND_INTEL8X0M
 	tristate "Intel/SiS/nVidia/AMD MC97 Modem"
-	depends on SND
 	select SND_AC97_CODEC
 	help
 	  Say Y here to include support for the integrated MC97 modem on
@@ -733,7 +696,6 @@ config SND_INTEL8X0M
 
 config SND_KORG1212
 	tristate "Korg 1212 IO"
-	depends on SND
 	select FW_LOADER if !SND_KORG1212_FIRMWARE_IN_KERNEL
 	select SND_PCM
 	help
@@ -753,7 +715,6 @@ config SND_KORG1212_FIRMWARE_IN_KERNEL
 
 config SND_MAESTRO3
 	tristate "ESS Allegro/Maestro3"
-	depends on SND
 	select FW_LOADER if !SND_MAESTRO3_FIRMWARE_IN_KERNEL
 	select SND_AC97_CODEC
 	help
@@ -774,7 +735,6 @@ config SND_MAESTRO3_FIRMWARE_IN_KERNEL
 
 config SND_MIXART
 	tristate "Digigram miXart"
-	depends on SND
 	select SND_HWDEP
 	select SND_PCM
 	help
@@ -786,7 +746,6 @@ config SND_MIXART
 
 config SND_NM256
 	tristate "NeoMagic NM256AV/ZX"
-	depends on SND
 	select SND_AC97_CODEC
 	help
 	  Say Y here to include support for NeoMagic NM256AV/ZX chips.
@@ -796,7 +755,6 @@ config SND_NM256
 
 config SND_PCXHR
 	tristate "Digigram PCXHR"
-	depends on SND
 	select SND_PCM
 	select SND_HWDEP
 	help
@@ -807,7 +765,6 @@ config SND_PCXHR
 
 config SND_RIPTIDE
 	tristate "Conexant Riptide"
-	depends on SND
 	select FW_LOADER
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
@@ -820,7 +777,6 @@ config SND_RIPTIDE
 
 config SND_RME32
 	tristate "RME Digi32, 32/8, 32 PRO"
-	depends on SND
 	select SND_PCM
 	help
 	  Say Y to include support for RME Digi32, Digi32 PRO and
@@ -832,7 +788,6 @@ config SND_RME32
 
 config SND_RME96
 	tristate "RME Digi96, 96/8, 96/8 PRO"
-	depends on SND
 	select SND_PCM
 	help
 	  Say Y here to include support for RME Digi96, Digi96/8 and
@@ -843,7 +798,6 @@ config SND_RME96
 
 config SND_RME9652
 	tristate "RME Digi9652 (Hammerfall)"
-	depends on SND
 	select SND_PCM
 	help
 	  Say Y here to include support for RME Hammerfall (RME
@@ -854,7 +808,7 @@ config SND_RME9652
 
 config SND_SIS7019
 	tristate "SiS 7019 Audio Accelerator"
-	depends on SND && X86 && !X86_64
+	depends on X86 && !X86_64
 	select SND_AC97_CODEC
 	help
 	  Say Y here to include support for the SiS 7019 Audio Accelerator.
@@ -864,7 +818,6 @@ config SND_SIS7019
 
 config SND_SONICVIBES
 	tristate "S3 SonicVibes"
-	depends on SND
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
@@ -877,7 +830,6 @@ config SND_SONICVIBES
 
 config SND_TRIDENT
 	tristate "Trident 4D-Wave DX/NX; SiS 7018"
-	depends on SND
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -889,7 +841,6 @@ config SND_TRIDENT
 
 config SND_VIA82XX
 	tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
-	depends on SND
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
 	help
@@ -901,7 +852,6 @@ config SND_VIA82XX
 
 config SND_VIA82XX_MODEM
 	tristate "VIA 82C686A/B, 8233 based Modems"
-	depends on SND
 	select SND_AC97_CODEC
 	help
 	  Say Y here to include support for the integrated MC97 modem on
@@ -912,7 +862,6 @@ config SND_VIA82XX_MODEM
 
 config SND_VIRTUOSO
 	tristate "Asus Virtuoso 100/200 (Xonar)"
-	depends on SND
 	select SND_OXYGEN_LIB
 	help
 	  Say Y here to include support for sound cards based on the
@@ -923,7 +872,6 @@ config SND_VIRTUOSO
 
 config SND_VX222
 	tristate "Digigram VX222"
-	depends on SND
 	select SND_VX_LIB
 	help
 	  Say Y here to include support for Digigram VX222 soundcards.
@@ -933,7 +881,6 @@ config SND_VX222
 
 config SND_YMFPCI
 	tristate "Yamaha YMF724/740/744/754"
-	depends on SND
 	select FW_LOADER if !SND_YMFPCI_FIRMWARE_IN_KERNEL
 	select SND_OPL3_LIB
 	select SND_MPU401_UART
@@ -975,4 +922,4 @@ config SND_AC97_POWER_SAVE_DEFAULT
 	  The default time-out value in seconds for AC97 automatic
 	  power-save mode.  0 means to disable the power-save mode.
 
-endmenu
+endif	# SND_PCI

sound/pcmcia/Kconfig

 # ALSA PCMCIA drivers
 
-menu "PCMCIA devices"
-	depends on SND!=n && PCMCIA
+menuconfig SND_PCMCIA
+	bool "PCMCIA sound devices"
+	depends on PCMCIA
+	default y
+	help
+	  Support for sound devices connected via the PCMCIA bus.
+
+if SND_PCMCIA && PCMCIA
 
 config SND_VXPOCKET
 	tristate "Digigram VXpocket"
-	depends on SND && PCMCIA
 	select SND_VX_LIB
 	help
 	  Say Y here to include support for Digigram VXpocket and
@@ -16,7 +21,6 @@ config SND_VXPOCKET
 
 config SND_PDAUDIOCF
 	tristate "Sound Core PDAudioCF"
-	depends on SND && PCMCIA
 	select SND_PCM
 	help
 	  Say Y here to include support for Sound Core PDAudioCF
@@ -25,4 +29,5 @@ config SND_PDAUDIOCF
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-pdaudiocf.
 
-endmenu
+endif	# SND_PCMCIA
+

sound/ppc/Kconfig

 # ALSA PowerMac drivers
 
-menu "ALSA PowerMac devices"
-	depends on SND!=n && PPC
-
-comment "ALSA PowerMac requires I2C"
-	depends on SND && I2C=n
+menuconfig SND_PPC
+	bool "PowerPC sound devices"
+	depends on PPC64 || PPC32
+	default y
+	help
+	  Support for sound devices specific to PowerPC architectures.
 
-comment "ALSA PowerMac requires INPUT"
-	depends on SND && INPUT=n
+if SND_PPC
 
 config SND_POWERMAC
 	tristate "PowerMac (AWACS, DACA, Burgundy, Tumbler, Keywest)"
-	depends on SND && I2C && INPUT && PPC_PMAC
+	depends on I2C && INPUT && PPC_PMAC
 	select SND_PCM
 	help
 	  Say Y here to include support for the integrated sound device.
@@ -32,14 +32,9 @@ config SND_POWERMAC_AUTO_DRC
 	  Note that you can turn on/off DRC manually even without this
 	  option.
 
-endmenu
-
-menu "ALSA PowerPC devices"
-	depends on SND!=n && ( PPC64 || PPC32 )
-
 config SND_PS3
 	tristate "PS3 Audio support"
-	depends on SND && PS3_PS3AV
+	depends on PS3_PS3AV
 	select SND_PCM
 	default m
 	help
@@ -52,4 +47,5 @@ config SND_PS3_DEFAULT_START_DELAY
 	int "Startup delay time in ms"
 	depends on SND_PS3
 	default "2000"
-endmenu
+
+endif	# SND_PPC

sound/sh/Kconfig

 # ALSA SH drivers
 
-menu "SUPERH devices"
-	depends on SND!=n && SUPERH
+menuconfig SND_SUPERH
+	bool "SUPERH sound devices"
+	depends on SUPERH
+	default y
+	help
+	  Support for sound devices specific to SUPERH architectures.
+	  Drivers that are implemented on ASoC can be found in
+	  "ALSA for SoC audio support" section.
+
+if SND_SUPERH
 
 config SND_AICA
 	tristate "Dreamcast Yamaha AICA sound"
-	depends on SH_DREAMCAST && SND
+	depends on SH_DREAMCAST
 	select SND_PCM
 	help
 	  ALSA Sound driver for the SEGA Dreamcast console.
 
-endmenu
+endif	# SND_SUPERH
 

sound/soc/Kconfig

@@ -2,15 +2,8 @@
 # SoC audio configuration
 #
 
-menu "System on Chip audio support"
-	depends on SND!=n
-
-config SND_SOC_AC97_BUS
-	bool
-
-config SND_SOC
+menuconfig SND_SOC
 	tristate "ALSA for SoC audio support"
-	depends on SND
 	select SND_PCM
 	---help---
 
@@ -23,6 +16,11 @@ config SND_SOC
 	  This ASoC audio support can also be built as a module.  If so, the module
 	  will be called snd-soc-core.
 
+if SND_SOC
+
+config SND_SOC_AC97_BUS
+	bool
+
 # All the supported Soc's
 source "sound/soc/at91/Kconfig"
 source "sound/soc/pxa/Kconfig"
@@ -35,4 +33,5 @@ source "sound/soc/omap/Kconfig"
 # Supported codecs
 source "sound/soc/codecs/Kconfig"
 
-endmenu
+endif	# SND_SOC
+

sound/soc/at91/Kconfig

 config SND_AT91_SOC
 	tristate "SoC Audio for the Atmel AT91 System-on-Chip"
-	depends on ARCH_AT91 && SND_SOC
+	depends on ARCH_AT91
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  the AT91 SSC interface. You will also need

sound/soc/codecs/Kconfig

 config SND_SOC_AC97_CODEC
 	tristate
-	depends on SND_SOC
+	select SND_AC97_CODEC
 
 config SND_SOC_WM8731
 	tristate
-	depends on SND_SOC
 
 config SND_SOC_WM8750
 	tristate
-	depends on SND_SOC
 
 config SND_SOC_WM8753
 	tristate
-	depends on SND_SOC
 
 config SND_SOC_WM9712
 	tristate
-	depends on SND_SOC
 
 config SND_SOC_WM9713
 	tristate
-	depends on SND_SOC
 
 # Cirrus Logic CS4270 Codec
 config SND_SOC_CS4270
 	tristate
-	depends on SND_SOC
 
 # Cirrus Logic CS4270 Codec Hardware Mute Support
 # Select if you have external muting circuitry attached to your CS4270.
@@ -43,4 +37,4 @@ config SND_SOC_CS4270_VD33_ERRATA
 
 config SND_SOC_TLV320AIC3X
 	tristate
-	depends on SND_SOC && I2C
+	depends on I2C

sound/soc/davinci/Kconfig

 config SND_DAVINCI_SOC
 	tristate "SoC Audio for the TI DAVINCI chip"
-	depends on ARCH_DAVINCI && SND_SOC
+	depends on ARCH_DAVINCI
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  the DAVINCI AC97 or I2S interface. You will also need

sound/soc/fsl/Kconfig

@@ -2,7 +2,7 @@ menu "ALSA SoC audio for Freescale SOCs"
 
 config SND_SOC_MPC8610
 	bool "ALSA SoC support for the MPC8610 SOC"
-	depends on SND_SOC && MPC8610_HPCD
+	depends on MPC8610_HPCD
 	default y if MPC8610
 	help
 	  Say Y if you want to add support for codecs attached to the SSI

sound/soc/pxa/Kconfig

 config SND_PXA2XX_SOC
 	tristate "SoC Audio for the Intel PXA2xx chip"
-	depends on ARCH_PXA && SND_SOC
+	depends on ARCH_PXA
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  the PXA2xx AC97, I2S or SSP interface. You will also need

sound/soc/s3c24xx/Kconfig

 config SND_S3C24XX_SOC
 	tristate "SoC Audio for the Samsung S3C24XX chips"
-	depends on ARCH_S3C2410 && SND_SOC
-	select SND_PCM
+	depends on ARCH_S3C2410
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  the S3C24XX AC97, I2S or SSP interface. You will also need
@@ -16,7 +15,6 @@ config SND_S3C2412_SOC_I2S
 config SND_S3C2443_SOC_AC97
 	tristate
 	select AC97_BUS
-	select SND_AC97_CODEC
 	select SND_SOC_AC97_BUS
 	
 config SND_S3C24XX_SOC_NEO1973_WM8753

sound/soc/sh/Kconfig

@@ -3,7 +3,7 @@ menu "SoC Audio support for SuperH"
 
 config SND_SOC_PCM_SH7760
 	tristate "SoC Audio support for Renesas SH7760"
-	depends on CPU_SUBTYPE_SH7760 && SND_SOC && SH_DMABRG
+	depends on CPU_SUBTYPE_SH7760 && SH_DMABRG
 	help
 	  Enable this option for SH7760 AC97/I2S audio support.
 
@@ -13,10 +13,9 @@ config SND_SOC_PCM_SH7760
 ##
 
 config SND_SOC_SH4_HAC
+	tristate
 	select AC97_BUS
 	select SND_SOC_AC97_BUS
-	select SND_AC97_CODEC
-	tristate
 
 config SND_SOC_SH4_SSI
 	tristate

sound/sparc/Kconfig

 # ALSA Sparc drivers
 
-menu "ALSA Sparc devices"
-	depends on SND!=n && SPARC
+menuconfig SND_SPARC
+	bool "Sparc sound devices"
+	depends on SPARC
+	default y
+	help
+	  Support for sound devices specific to Sun SPARC architectures.
+
+if SND_SPARC
 
 config SND_SUN_AMD7930
 	tristate "Sun AMD7930"
-	depends on SBUS && SND
+	depends on SBUS
 	select SND_PCM
 	help
 	  Say Y here to include support for AMD7930 sound device on Sun.
@@ -15,7 +21,6 @@ config SND_SUN_AMD7930
 
 config SND_SUN_CS4231
 	tristate "Sun CS4231"
-	depends on SND
 	select SND_PCM
 	help
 	  Say Y here to include support for CS4231 sound device on Sun.
@@ -25,7 +30,7 @@ config SND_SUN_CS4231
 
 config SND_SUN_DBRI
 	tristate "Sun DBRI"
-	depends on SND && SBUS
+	depends on SBUS
 	select SND_PCM
 	help
 	  Say Y here to include support for DBRI sound device on Sun.
@@ -33,4 +38,4 @@ config SND_SUN_DBRI
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-sun-dbri.
 
-endmenu
+endif	# SND_SPARC

sound/spi/Kconfig

 #SPI drivers
 
-menu "SPI devices"
-	depends on SND != n
+menuconfig SND_SPI
+	bool "SPI sound devices"
+	depends on SPI
+	default y
+	help
+	  Support for sound devices connected via the SPI bus.
+
+if SND_SPI
 
 config SND_AT73C213
 	tristate "Atmel AT73C213 DAC driver"
@@ -28,4 +34,5 @@ config SND_AT73C213_TARGET_BITRATE
 
 	  Set to 48000 Hz by default.
 
-endmenu
+endif	# SND_SPI
+

sound/usb/Kconfig

 # ALSA USB drivers
 
-menu "USB devices"
-	depends on SND!=n && USB!=n
+menuconfig SND_USB
+	bool "USB sound devices"
+	depends on USB
+	default y
+	help
+	  Support for sound devices connected via the USB bus.
+
+if SND_USB && USB
 
 config SND_USB_AUDIO
 	tristate "USB Audio/MIDI driver"
-	depends on SND && USB
 	select SND_HWDEP
 	select SND_RAWMIDI
 	select SND_PCM
@@ -18,7 +23,7 @@ config SND_USB_AUDIO
 
 config SND_USB_USX2Y
 	tristate "Tascam US-122, US-224 and US-428 USB driver"
-	depends on SND && USB && (X86 || PPC || ALPHA)
+	depends on X86 || PPC || ALPHA
 	select SND_HWDEP
 	select SND_RAWMIDI
 	select SND_PCM
@@ -31,7 +36,6 @@ config SND_USB_USX2Y
 
 config SND_USB_CAIAQ
 	tristate "Native Instruments USB audio devices"
-	depends on SND && USB
 	select SND_HWDEP
 	select SND_RAWMIDI
 	select SND_PCM
@@ -63,5 +67,5 @@ config SND_USB_CAIAQ_INPUT
 	   * Native Instruments Kore Controller 2
 	   * Native Instruments Audio Kontrol 1
 
-endmenu
+endif	# SND_USB