- 23 3月, 2012 4 次提交
-
-
由 Jiri Olsa 提交于
The perf diff command is broken since: perf hists: Threaded addition and sorting of entries commit 1980c2eb Several places were broken: - hists data need to be collected into opened sessions instead of into events - session's hists data need to be initialized properly when the session is created - hist_entry__pcnt_snprintf: the percentage and displacement buffer preparation must not use 'ret' because it's used as a pointer to the final buffer Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120322133726.GB1601@m.brq.redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
The event modifier needs to be applied only on the event definition it is attached to. The current state is that in case of multiple events definition (in single '-e' option, separated by ',') all will get modifier of the last one. Fixing this by adding separated list for each event definition, so the modifier is applied only to proper event(s). Added automated test to catch this, plus some other modifier tests. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1332267341-26338-3-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
- util/parse-events.c(parse_events_add_breakpoint) need to use unsigned long instead of u64, otherwise we get following gcc error on 32 bits: error: cast from pointer to integer of different size - util/header.c(print_event_desc) cannot retype to signed type, otherwise we get following gcc error on 32 bits: error: comparison between signed and unsigned integer expressions Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1332267341-26338-2-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Borislav Petkov 提交于
We're freeing the token in any case so simplify the exit path by unifying it. No functional change. Signed-off-by: NBorislav Petkov <bp@amd64.org> Link: http://lkml.kernel.org/r/1332339347-21342-1-git-send-email-bp@amd64.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 20 3月, 2012 1 次提交
-
-
由 Pekka Enberg 提交于
This patch adds a simple GTK2-based browser to 'perf report' that's based on the TTY-based browser in builtin-report.c. To launch "perf report" using the new GTK interface just type: $ perf report --gtk The interface is somewhat limited in features at the moment: - No callgraph support - No KVM guest profiling support - No color coding for percentages - No sorting from the UI - ..and many, many more! That said, I think this patch a reasonable start to build future features on. Signed-off-by: NPekka Enberg <penberg@kernel.org> Cc: Colin Walters <walters@verbum.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1202231952410.6689@tux.localdomain [ committer note: Added #pragma to make gtk no strict prototype problem go away as suggested by Colin Walters modulo avoiding push/pop ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 19 3月, 2012 1 次提交
-
-
由 Namhyung Kim 提交于
As Arnaldo pointed out, it should be cleared to prevent the window from displaying overlapped strings on the region. Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1332125180-23041-1-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 17 3月, 2012 8 次提交
-
-
由 Namhyung Kim 提交于
Now user can enter symbol name interested via ui_browser__input_window, and perf can process it using hists__filter_by_symbol(). Giving empty symbol (by pressing 's' followed by ENTER) will disable the filtering. Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1331887855-874-3-git-send-email-namhyung.kim@lge.comSigned-off-by: NNamhyung Kim <namhyung.kim@lge.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The ui_browser__input_window() function is to get user's key input. Current implementation can handle maximum 49 characters. Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1331887855-874-2-git-send-email-namhyung.kim@lge.comSigned-off-by: NNamhyung Kim <namhyung.kim@lge.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
This function will be used for simple (sub-)string matching filter based on user input. Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1331887855-874-1-git-send-email-namhyung.kim@lge.comSigned-off-by: NNamhyung Kim <namhyung.kim@lge.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
When event group is enabled for forked task (i.e. no target task/cpu was specified) all events were disabled and marked ->enable_on_exec. However they wouldn't be counted at all since only group leader will be enabled on exec actually. In contrast to perf stat, perf record doesn't have a real problem as it enables all the event before proceeding. But it needs to be fixed anyway IMHO. Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1331887340-32448-2-git-send-email-namhyung.kim@lge.comSigned-off-by: NNamhyung Kim <namhyung.kim@lge.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Added new event rule to the event definition grammar: event_def: event_pmu | ... event_pmu: PE_NAME '/' event_config '/' Using this rule, event could be now specified like: cpu/config=1,config1=2,config2=3/u where pmu name 'cpu' is looked up via following path: ${sysfs_mount}/bus/event_source/devices/${pmu} and config options are bound to the pmu's format definiton: ${sysfs_mount}/bus/event_source/devices/${pmu}/format The hardcoded config options still stays and have precedence over any format field defined with same name. Acked-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NJiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-50d8nr94f8k4wkezutrxvthe@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Adding pmu object which provides interface to pmu's sysfs event format definition located at: ${sysfs_mount}/bus/event_source/devices/${pmu}/format Following interface is exported: struct perf_pmu* perf_pmu__find(char *name); - this function returns pmu object, which is then passed as a handle to other interface functions int perf_pmu__config(struct perf_pmu *pmu, struct perf_event_attr *attr, struct list_head *head_terms); - this function configures perf_event_attr struct based on pmu's format definitions and config terms data, containined in head_terms list. Parser generator is used to retrive the pmu's format definition. The generated parser is part of the patch. Added makefile rule 'pmu-parser' to generate the parser code out of the bison/flex sources. Added builtin test 'Test perf pmu format parsing', which could be run like: perf test pmu Acked-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NJiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-errz96u1668gj9wlop1zhpht@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Adding a new rule to the event grammar to be able to specify values of additional attributes of symbolic event. The new syntax for event symbolic definition is: event_legacy_symbol: PE_NAME_SYM '/' event_config '/' | PE_NAME_SYM sep_slash_dc event_config: event_config ',' event_term | event_term event_term: PE_NAME '=' PE_NAME | PE_NAME '=' PE_VALUE PE_NAME sep_slash_dc: '/' | ':' | At the moment the config options are hardcoded to be used for legacy symbol events to define several perf_event_attr fields. It is: 'config' to define perf_event_attr::config 'config1' to define perf_event_attr::config1 'config2' to define perf_event_attr::config2 'period' to define perf_event_attr::sample_period Legacy events could be now specified as: cycles/period=100000/ If term is specified without the value assignment, then 1 is assigned by default. Acked-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NJiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-mgkavww9790jbt2jdkooyv4q@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Changing event parsing to use flex/bison parse generator. The event syntax stays as it was. grammar description: events: events ',' event | event event: event_def PE_MODIFIER_EVENT | event_def event_def: event_legacy_symbol sep_dc | event_legacy_cache sep_dc | event_legacy_breakpoint sep_dc | event_legacy_tracepoint sep_dc | event_legacy_numeric sep_dc | event_legacy_raw sep_dc event_legacy_symbol: PE_NAME_SYM event_legacy_cache: PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT | PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT | PE_NAME_CACHE_TYPE event_legacy_raw: PE_SEP_RAW PE_VALUE event_legacy_numeric: PE_VALUE ':' PE_VALUE event_legacy_breakpoint: PE_SEP_BP ':' PE_VALUE ':' PE_MODIFIER_BP event_breakpoint_type: PE_MODIFIER_BPTYPE | empty PE_NAME_SYM: cpu-cycles|cycles | stalled-cycles-frontend|idle-cycles-frontend | stalled-cycles-backend|idle-cycles-backend | instructions | cache-references | cache-misses | branch-instructions|branches | branch-misses | bus-cycles | cpu-clock | task-clock | page-faults|faults | minor-faults | major-faults | context-switches|cs | cpu-migrations|migrations | alignment-faults | emulation-faults PE_NAME_CACHE_TYPE: L1-dcache|l1-d|l1d|L1-data | L1-icache|l1-i|l1i|L1-instruction | LLC|L2 | dTLB|d-tlb|Data-TLB | iTLB|i-tlb|Instruction-TLB | branch|branches|bpu|btb|bpc | node PE_NAME_CACHE_OP_RESULT: load|loads|read | store|stores|write | prefetch|prefetches | speculative-read|speculative-load | refs|Reference|ops|access | misses|miss PE_MODIFIER_EVENT: [ukhp]{0,5} PE_MODIFIER_BP: [rwx] PE_SEP_BP: 'mem' PE_SEP_RAW: 'r' sep_dc: ':' | Added flex/bison files for event grammar parsing. The generated parser is part of the patch. Added makefile rule 'event-parser' to generate the parser code out of the bison/flex sources. Acked-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NJiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-u4pfig5waq3ll2bfcdex8fgi@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 14 3月, 2012 4 次提交
-
-
由 Ingo Molnar 提交于
On ancient systems I get this build failure: util/../../../arch/x86/include/asm/unistd.h:67:29: error: asm/unistd_64.h: No such file or directory In file included from util/cache.h:7, from builtin-test.c:8: util/../perf.h: In function ‘sys_perf_event_open’:In file included from util/../perf.h:16 perf.h:170: error: ‘__NR_perf_event_open’ undeclared (first use in this function) The reason is that this old system does not have the split unistd.h headers yet, from which to pick up the syscall definitions. Add the syscall numbers to the already existing i386 and x86_64 blocks in perf.h, and also provide empty include file stubs. With this patch perf builds and works fine on 5 years old user-space as well. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/n/tip-jctwg64le1w47tuaoeyftsg9@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Several places were expecting that the value returned was the number of characters printed, not what would be printed if there was space. Fix it by using the scnprintf and vscnprintf variants we inherited from the kernel sources. Some corner cases where the number of printed characters were not accounted were fixed too. Reported-by: NAnton Blanchard <anton@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Eric B Munson <emunson@mgebm.net> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Cc: stable@kernel.org Link: http://lkml.kernel.org/n/tip-kwxo2eh29cxmd8ilixi2005x@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Anton Blanchard 提交于
I have a workload where perf top scribbles over the stack and we SEGV. What makes it interesting is that an snprintf is causing this. The workload is a c++ gem that has method names over 3000 characters long, but snprintf is designed to avoid overrunning buffers. So what went wrong? The problem is we assume snprintf returns the number of characters written: ret += repsep_snprintf(bf + ret, size - ret, "[%c] ", self->level); ... ret += repsep_snprintf(bf + ret, size - ret, "%s", self->ms.sym->name); Unfortunately this is not how snprintf works. snprintf returns the number of characters that would have been written if there was enough space. In the above case, if the first snprintf returns a value larger than size, we pass a negative size into the second snprintf and happily scribble over the stack. If you have 3000 character c++ methods thats a lot of stack to trample. This patch fixes repsep_snprintf by clamping the value at size - 1 which is the maximum snprintf can write before adding the NULL terminator. I get the sinking feeling that there are a lot of other uses of snprintf that have this same bug, we should audit them all. Cc: David Ahern <dsahern@gmail.com> Cc: Eric B Munson <emunson@mgebm.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Cc: stable@kernel.org Link: http://lkml.kernel.org/r/20120307114249.44275ca3@krytenSigned-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephane Eranian 提交于
This patch fixes a buffer overrun bug in tracepoint_id_to_path(). The bug manisfested itself as a memory error reported by perf record. I ran into it with perf sched: $ perf sched rec noploop 2 noploop for 2 seconds [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 42.701 MB perf.data (~1865622 samples) ] Fatal: No memory to alloc tracepoints list It turned out that tracepoint_id_to_path() was reading the tracepoint id using read() but the buffer was not large enough to include the \n terminator for id with 4 digits or more. The patch fixes the problem by extending the buffer to a more reasonable size covering all possible id length include \n terminator. Note that atoll() stops at the first non digit character, thus it is not necessary to clear the buffer between each read. Signed-off-by: NStephane Eranian <eranian@google.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: fweisbec@gmail.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/20120313155102.GA6465@quadSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 3月, 2012 2 次提交
-
-
由 Stephane Eranian 提交于
This patch fixes perf report to not go back two levels when pressing the 'q' key while annotating in branch view mode. When pressing 'q' in annotate mode and if the branch source and target belong to different functions, perf now brings up the annotation popup menu again to offer the option to annotate the other branch source or target. As part of the code restructuring in perf_evsel__hists_browse() we also fix a memory leak on options[] in case of error. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: asharma@fb.com Cc: ravitillo@lbl.gov Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1331565210-10865-3-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
This patch removes the duplicated annotate selection when browsing in branch view mode. If the sym and dso oof the branch source and target are the same, then only one annotate choice is proposed. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: asharma@fb.com Cc: ravitillo@lbl.gov Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1331565210-10865-2-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 09 3月, 2012 8 次提交
-
-
由 Stephane Eranian 提交于
This patch updates perf report to support TUI mode when the perf.data file contains samples with branch stacks. For each row in the report, it is possible to annotate either the source or target of each branch. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: asharma@fb.com Cc: ravitillo@lbl.gov Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1331246868-19905-5-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
This patch enhances perf report to auto-detect when the perf.data file contains samples with branch stacks. That way it is not necessary to use the -b option. To force branch view mode to off, simply use --no-branch-stack. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: asharma@fb.com Cc: ravitillo@lbl.gov Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1331246868-19905-4-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
This patch adds a new feature bit, namely, HEADER_BRANCH_STACK. When present, it indicates that sample records may contain branch stack. This could be useful to a viewer to switch to branch mode without having to parse all the samples or without a specific cmdline option. This will be used in a subsequent patch to enhance perf report with branch stacks. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: asharma@fb.com Cc: ravitillo@lbl.gov Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1331246868-19905-3-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
This patches provides a way to handle legacy perf.data files. Legacy files are those using the older PERFFILE signature. For those, it is still necessary to detect endianness but without comparing their header->attr_size with the tool's own version as it may be different. Instead, we use a reference table for all known sizes from the legacy era. We try all the combinations for sizes and endianness. If we find a match, we proceed, otherwise we return: "incompatible file format". This is also done for the pipe-mode file format. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: robert.richter@amd.com Cc: ming.m.lin@intel.com Cc: andi@firstfloor.org Cc: asharma@fb.com Cc: ravitillo@lbl.gov Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1328826068-11713-19-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
This patches cleans up local variable types for msz and ret. They need to be size_t and ssize_t respectively. It also fixes a bug whereby perf would not read attr struct with a different size than what it knows about. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: robert.richter@amd.com Cc: ming.m.lin@intel.com Cc: andi@firstfloor.org Cc: asharma@fb.com Cc: ravitillo@lbl.gov Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1328826068-11713-18-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Stephane Eranian 提交于
This patch allows perf to process perf.data files generated using an ABI that has a different perf_event_attr struct size, i.e., a different ABI version. The perf_event_attr can be extended, yet perf needs to cope with older perf.data files. Similarly, perf must be able to cope with a perf.data file which is using a newer version of the ABI than what it knows about. This patch adds read_attr(), a routine that reads a perf_event_attr struct from a file incrementally based on its advertised size. If the on-file struct is smaller than what perf knows, then the extra fields are zeroed. If the on-file struct is bigger, then perf only uses what it knows about, the rest is skipped. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: robert.richter@amd.com Cc: ming.m.lin@intel.com Cc: andi@firstfloor.org Cc: asharma@fb.com Cc: ravitillo@lbl.gov Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1328826068-11713-17-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Roberto Agostino Vitillo 提交于
This patch adds a new option to enable taken branch stack sampling, i.e., leverage the PERF_SAMPLE_BRANCH_STACK feature of perf_events. There is a new option to active this mode: -b. It is possible to pass a set of filters to select the type of branches to sample. The following filters are available: - any : any type of branches - any_call : any function call or system call - any_ret : any function return or system call return - any_ind : any indirect branch - u: only when the branch target is at the user level - k: only when the branch target is in the kernel - hv: only when the branch target is in the hypervisor Filters can be combined by passing a comma separated list to the option: $ perf record -b any_call,u -e cycles:u branchy Signed-off-by: NRoberto Agostino Vitillo <ravitillo@lbl.gov> Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: robert.richter@amd.com Cc: ming.m.lin@intel.com Cc: andi@firstfloor.org Cc: asharma@fb.com Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1328826068-11713-13-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Roberto Agostino Vitillo 提交于
This patch adds: - ability to parse samples with PERF_SAMPLE_BRANCH_STACK - sort on branches (dso_from, symbol_from, dso_to, symbol_to, mispredict) - build histograms on branches Signed-off-by: NRoberto Agostino Vitillo <ravitillo@lbl.gov> Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: robert.richter@amd.com Cc: ming.m.lin@intel.com Cc: andi@firstfloor.org Cc: asharma@fb.com Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1328826068-11713-12-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 05 3月, 2012 6 次提交
-
-
由 Namhyung Kim 提交于
If perf.data couldn't find vmlinux image for the given build-id, it would print error message. However it lacked a newline at the end, so the output looked like below: $ perf annotate --stdio No vmlinux file with build id 63b554b2e90f14a4bced200008865e757d3e8b36 was found in the path. Please use: perf buildid-cache -av vmlinux or: --vmlinux vmlinux Percent | Source code & Disassembly of a.out ------------------------------------------------ : : : : Disassembly of section .text: : : 00000000004004f4 <foo>: 0.00 : 4004f4: push %rbp 0.00 : 4004f5: mov %rsp,%rbp 0.00 : 4004f8: movl $0x0,-0x4(%rbp) 0.00 : 4004ff: jmp 400517 <foo+0x23> 14.70 : 400501: mov 0x200b28(%rip),%rax # 601030 <count> 0.02 : 400508: add $0x1,%rax 0.01 : 40050c: mov %rax,0x200b1d(%rip) # 601030 <count> 0.01 : 400513: addl $0x1,-0x4(%rbp) 13.92 : 400517: cmpl $0x98967f,-0x4(%rbp) 71.33 : 40051e: jle 400501 <foo+0xd> 0.00 : 400520: leaveq 0.00 : 400521: retq Fix it by adding a newline at the end of the message. It doesn't affect the tui output AFAICS. New output will look like this: ... or: --vmlinux vmlinux Percent | Source code & Disassembly of a.out ------------------------------------------------ : : : : Disassembly of section .text: ... Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1329986784-4916-6-git-send-email-namhyung.kim@lge.comSigned-off-by: NNamhyung Kim <namhyung.kim@lge.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
Separate multiple binding using /, capitalize descriptions, add missing key binding. Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1329986784-4916-5-git-send-email-namhyung.kim@lge.comSigned-off-by: NNamhyung Kim <namhyung.kim@lge.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
On tui annotation, the title was set to name of the target symbol if user selects the target. However it remained after returning to original symbol from the target. Fix it. Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1329986784-4916-4-git-send-email-namhyung.kim@lge.comSigned-off-by: NNamhyung Kim <namhyung.kim@lge.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
Accepting upper case character only is unconvenient since it requires SHIFT key too. Why not change to it accept a simple key stroke? Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1329986784-4916-3-git-send-email-namhyung.kim@lge.comSigned-off-by: NNamhyung Kim <namhyung.kim@lge.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
Print unselected asm code lines as blue. This is what we do now for --stdio. Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1329986784-4916-2-git-send-email-namhyung.kim@lge.comSigned-off-by: NNamhyung Kim <namhyung.kim@lge.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
If perf_evsel__open() failed, the errno was set and returned properly. However since the perf_evlist__open() called close() on fd's for all of evsel x cpu x thread after the failure, the errno was overridden by other code (EBADF). So the caller of the function ended up seeing different error message and getting confused. Fit it by restoring original return value. Because one of caller of the function is in the python extension, and it uses system errno internally, it'd be better restoring the original value rather than using the return value of the function directly, IMHO (i.e. I'm not a python expert :) Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1329966816-23175-1-git-send-email-namhyung.kim@lge.comSigned-off-by: NNamhyung Kim <namhyung.kim@lge.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 03 3月, 2012 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Just fall back to resetting those fields, if set, warning the user that that feature is not available. If guest samples appear they will just be discarded because no struct machine will be found and thus the event will be accounted as not handled and dropped, see 0c095715. Reported-by: NNamhyung Kim <namhyung@gmail.com> Tested-by: NJoerg Roedel <joerg.roedel@amd.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-vuwxig36mzprl5n7nzvnxxsh@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Joerg Roedel 提交于
Setting perf_guest to true by default makes no sense because the perf subcommands can not setup guest symbol information and thus not process and guest samples. The only exception is perf-kvm which changes the perf_guest value on its own. So change the default for perf_guest back to false. Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jason Wang <jasowang@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1328893505-4115-3-git-send-email-joerg.roedel@amd.comSigned-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 01 3月, 2012 4 次提交
-
-
由 Prashanth Nageshappa 提交于
The 'perf probe' command allows kprobe to be inserted at any offset from a function start, which results in adding kprobes to unintended location. (example: perf probe do_fork+10000 is allowed even though size of do_fork is ~904). My previous patch https://lkml.org/lkml/2012/2/24/42 addressed the case where DWARF info was available for the kernel. This patch fixes the case where perf probe is used on a kernel without debuginfo available. Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/4F4C544D.1010909@linux.vnet.ibm.comSigned-off-by: NPrashanth Nageshappa <prashanth@linux.vnet.ibm.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 David Ahern 提交于
If threads in a multi-threaded process have names shorter than the main thread the comm for the named threads is not properly terminated. E.g., for the process 'namedthreads' where each thread is named noploop%d where %d is the thread number: Before: perf script -f comm,tid,ip,sym,dso noploop:4ads 21616 400a49 noploop (/tmp/namedthreads) The 'ads' in the thread comm bleeds over from the process name. After: perf script -f comm,tid,ip,sym,dso noploop:4 21616 400a49 noploop (/tmp/namedthreads) Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1330111898-68071-1-git-send-email-dsahern@gmail.comSigned-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Prashanth Nageshappa 提交于
The perf probe command allows kprobe to be inserted at any offset from a function start, which results in adding kprobes to unintended location. Example: perf probe do_fork+10000 is allowed even though size of do_fork is ~904. This patch will ensure probe addition fails when the offset specified is greater than size of the function. Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/4F473F33.4060409@linux.vnet.ibm.comSigned-off-by: NPrashanth Nageshappa <prashanth@linux.vnet.ibm.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
On old kernels that don't support sample_id_all feature, perf_evlist__id2evsel() returns NULL for non-sampling events. This breaks perf top when multiple events are given on command line. Fix it by using first evsel in the evlist. This will also prevent getting the same (potential) problem in such new tool/ old kernel combo. Suggested-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1329702447-25045-1-git-send-email-namhyung.kim@lge.comSigned-off-by: NNamhyung Kim <namhyung.kim@lge.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-