commit 3628b4ca64f24a4ec55055597d0cb1c814729f8b upstream.

Some qgroup trace events like btrfs_qgroup_release_data() and
btrfs_qgroup_free_delayed_ref() can still be triggered even if qgroup is
not enabled.

This is caused by the lack of qgroup status check before calling some
qgroup functions.  Thankfully the functions can handle quota disabled
case well and just do nothing for qgroup disabled case.

This patch will do earlier check before triggering related trace events.

And for enabled <-> disabled race case:

1) For enabled->disabled case
   Disable will wipe out all qgroups data including reservation and
   excl/rfer. Even if we leak some reservation or numbers, it will
   still be cleared, so nothing will go wrong.

2) For disabled -> enabled case
   Current btrfs_qgroup_release_data() will use extent_io tree to ensure
   we won't underflow reservation. And for delayed_ref we use
   head->qgroup_reserved to record the reserved space, so in that case
   head->qgroup_reserved should be 0 and we won't underflow.

CC: stable@vger.kernel.org # 4.14+
Reported-by: NChris Murphy <lists@colorremedies.com>
Link: https://lore.kernel.org/linux-btrfs/CAJCQCtQau7DtuUUeycCkZ36qjbKuxNzsgqJ7+sJ6W0dK_NLE3w@mail.gmail.com/Signed-off-by: NQu Wenruo <wqu@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 18858511fd8a877303cc34c06efa461b26a0e070 upstream.

Return -ENOENT error if there is no target synthetic event.
This notices an operation failure to user as below;

  # echo 'wakeup_latency u64 lat; pid_t pid;' > synthetic_events
  # echo '!wakeup' >> synthetic_events
  sh: write error: No such file or directory

Link: http://lkml.kernel.org/r/154013449986.25576.9487131386597290172.stgit@devboxAcked-by: NTom Zanussi <zanussi@linux.intel.com>
Tested-by: NTom Zanussi <zanussi@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Cc: stable@vger.kernel.org
Fixes: 4b147936 ('tracing: Add support for 'synthetic' events')
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 48dc0ef19044bfb69193302fbe3a834e3331b7ae upstream.

Test ptrace-tm-spd-gpr fails on current kernel (4.19) due to a segmentation
fault that happens on the child process prior to setting cptr[2] = 1. This
causes the parent process to wait forever at 'while (!pptr[2])' and the test to
be killed by the test harness framework by timeout, thus, failing.

The segmentation fault happens because of a inline assembly being
generated as:

	0x10000355c <tm_spd_gpr+492>    lfs    f0, 0(0)

This is reading memory position 0x0 and causing the segmentation fault.

This code is being generated by ASM_LOAD_FPR_SINGLE_PRECISION(flt_4), where
flt_4 is passed to the inline assembly block as:

	[flt_4] "r" (&d)

Since the inline assembly 'r' constraint means any GPR, gpr0 is being
chosen, thus causing this issue when issuing a Load Floating-Point Single
instruction.

This patch simply changes the constraint to 'b', which specify that this
register will be used as base, and r0 is not allowed to be used, avoiding
this issue.

Other than that, removing flt_2 register from the input operands, since it
is not used by the inline assembly code at all.

Cc: stable@vger.kernel.org
Signed-off-by: NBreno Leitao <leitao@debian.org>
Acked-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0d0352d8b3d6d7ca9a710b40e194cbbaeb841c88 upstream.

Fix the synthetic event test case to remove event correctly.
If redirecting command to synthetic_event file without append
mode, it cleans up all existing events and execute (parse) the
command. This means "delete event" always fails to find the
target event.

Since previous synthetic event has a bug which doesn't return
-ENOENT even if it fails to find the deleting event, this test
passed. But fixing that bug, this test fails because this test
itself has a bug.

This fixes that bug by trying to delete event right after
adding an event, and use append mode redirection ('>>') instead
of normal redirection ('>').

Link: http://lkml.kernel.org/r/154013452832.25576.2305459545429386517.stgit@devboxAcked-by: NShuah Khan <shuah@kernel.org>
Acked-by: NTom Zanussi <zanussi@linux.intel.com>
Tested-by: NTom Zanussi <zanussi@linux.intel.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: stable@vger.kernel.org
Fixes: f06eec4d ('selftests: ftrace: Add inter-event hist triggers testcases')
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1dc6bd5e39a29453bdcc17348dd2a89f1aa4004e upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

To make things worse, the parent pmc node could end up being prematurely
freed as of_find_node_by_name() drops a reference to its first argument.

Fixes: 3568df3d ("soc: tegra: Add thermal reset (thermtrip) support to PMC")
Cc: stable <stable@vger.kernel.org>     # 4.0
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Reviewed-by: NMikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 137dc5843faeacabf48fc22a8dc58c4e0b4f0927 upstream.

The scm device must be present in order for the rmtfs driver to
configure memory permissions for the rmtfs memory region, so check that
it is probed before continuing.

Cc: stable@vger.kernel.org
Fixes: fa65f804 ("soc: qcom: rmtfs-mem: Add support for assigning memory to remote")
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 74121b9aa3cd571ddfff014a9f47db36cae3cda9 upstream.

Correct the register size of the System Manager node.

Cc: stable@vger.kernel.org
Fixes: 78cd6a9d ("arm64: dts: Add base stratix 10 dtsi")
Signed-off-by: NThor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ce3bf934f919a7d675c5b7fa4cc233ded9c6256e upstream.

The address in the SDRAM node was incorrect. Fix this to agree with the
correct address and to match the reg definition block.

Cc: stable@vger.kernel.org
Fixes: 54b4a8f5("arm: socfpga: dts: Add Arria10 SDRAM EDAC DTS support")
Signed-off-by: NThor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 672ca9dd13f1aca0c17516f76fc5b0e8344b3e46 upstream.

It is possible for corrupted filesystem images to produce very large
block offsets that may wrap when a length is added, and wrongly pass
the buffer size test.
Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 940c620d6af8fca7d115de40f19870fba415efac upstream.

Currently a failed allocation of channel->name leads to an
immediate return without freeing channel. Fix this by setting
ret to -ENOMEM and jumping to an exit path that kfree's channel.

Detected by CoverityScan, CID#1473692 ("Resource Leak")

Fixes: 53e2822e ("rpmsg: Introduce Qualcomm SMD backend")
Cc: stable@vger.kernel.org
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2a6c7c367de82951c98a290a21156770f6f82c84 upstream.

x0 is not callee-saved in the PCS. So there is no need to specify
-fcall-used-x0.

Clang doesn't currently support -fcall-used flags. This patch will help
building the kernel with clang.
Tested-by: NNick Desaulniers <ndesaulniers@google.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NTri Vo <trong@android.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 463659a08d7999d5461fa45b35b17686189a70ca upstream.

These names have been renamed in the CTA-861 standard due to trademark
issues. Replace them here as well so they are in sync with the standard.
Signed-off-by: NHans Verkuil <hansverk@cisco.com>
Cc: stable@vger.kernel.org
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit db0340182444612bcadb98bdec22f651aa42266c upstream.

The CTA-861 standards have been updated to refer to opRGB instead
of AdobeRGB. The official standard is in fact named opRGB, so
switch to that.

The two old defines referring to ADOBERGB in the public API are
put under #ifndef __KERNEL__ and a comment mentions that they are
deprecated.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a58c37978cf02f6d35d05ee4e9288cb8455f1401 upstream.

Drop all Adobe references and use the official opRGB standard
instead.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ceff2f4dcd44abf35864d9a99f85ac619e89a01d upstream.

Use the new of_get_compatible_child() helper to lookup the sibling
instead of using of_find_compatible_node(), which searches the entire
tree from a given start node and thus can return an unrelated (i.e.
non-sibling) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent device node).

While at it, also fix the related cec-node reference leak.

Fixes: 8f83f268 ("drm/mediatek: Add HDMI support")
Cc: stable <stable@vger.kernel.org>     # 4.8
Cc: Junzhi Zhao <junzhi.zhao@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ab83203e181015b099720aff43ffabc1812e0fb3 upstream.

When there is no EDID the CEC adapter should be unconfigured as
well. So call cec_phys_addr_invalidate() when this happens.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.18 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e7da89926f6dc6cf855f5ffdf79ef99a1b115ca7 upstream.

When there is no EDID the CEC adapter should be unconfigured as
well. So call cec_phys_addr_invalidate() when this happens.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.18 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 258c430456ba5f0005043762e14fc3be35983aaf upstream.

The a->index is not the name of the internal amux entry,
but, instead a value from zero to the maximum number
of audio inputs.

As the actual available inputs depend on each board, build
it dynamically.

This is broken for a really long time. On a quick check,
since at least commit 195a4ef6 ("V4L/DVB (6585): Convert
em28xx to video_ioctl2") this was not implemented right.

Fixes: 195a4ef6 ("V4L/DVB (6585): Convert em28xx to video_ioctl2")

Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit afeaade90db4c5dab93f326d9582be1d5954a198 upstream.

The v4l2-compliance tool complains if a video doesn't start
with a zero sequence number.

While this shouldn't cause any real problem for apps, let's
make it happier, in order to better check the v4l2-compliance
differences before and after patchsets.

This is actually an old issue. It is there since at least its
videobuf2 conversion, e. g. changeset 3829fadc461 ("[media]
em28xx: convert to videobuf2"), if VB1 wouldn't suffer from
the same issue.

Cc: stable@vger.kernel.org
Fixes: d3829fad ("[media] em28xx: convert to videobuf2")
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 15644bfa195bd166d0a5ed76ae2d587f719c3dac upstream.

Instead of using a register value, use an AMUX name, as otherwise
VIDIOC_G_AUDIO would fail.

Cc: stable@vger.kernel.org
Fixes: 766ed64d ("V4L/DVB (11827): Add support for Terratec Grabster AV350")
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5c4c4505b716cb782ad7263091edc466c4d1fbd4 upstream.

The parameters of v4l2_ctrl_new_std_menu_items() are tricky: instead of
the number of possible values, it requires the number of the maximum
value. In other words, the ARRAY_SIZE() value should be decremented,
otherwise it will go past the array bounds, as warned by KASAN:

[  279.839688] BUG: KASAN: global-out-of-bounds in v4l2_querymenu+0x10d/0x180 [videodev]
[  279.839709] Read of size 8 at addr ffffffffc10a4cb0 by task v4l2-compliance/16676

[  279.839736] CPU: 1 PID: 16676 Comm: v4l2-compliance Not tainted 4.18.0-rc2+ #120
[  279.839741] Hardware name:  /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
[  279.839743] Call Trace:
[  279.839758]  dump_stack+0x71/0xab
[  279.839807]  ? v4l2_querymenu+0x10d/0x180 [videodev]
[  279.839817]  print_address_description+0x1c9/0x270
[  279.839863]  ? v4l2_querymenu+0x10d/0x180 [videodev]
[  279.839871]  kasan_report+0x237/0x360
[  279.839918]  v4l2_querymenu+0x10d/0x180 [videodev]
[  279.839964]  __video_do_ioctl+0x2c8/0x590 [videodev]
[  279.840011]  ? copy_overflow+0x20/0x20 [videodev]
[  279.840020]  ? avc_ss_reset+0xa0/0xa0
[  279.840028]  ? check_stack_object+0x21/0x60
[  279.840036]  ? __check_object_size+0xe7/0x240
[  279.840080]  video_usercopy+0xed/0x730 [videodev]
[  279.840123]  ? copy_overflow+0x20/0x20 [videodev]
[  279.840167]  ? v4l_enumstd+0x40/0x40 [videodev]
[  279.840177]  ? __handle_mm_fault+0x9f9/0x1ba0
[  279.840186]  ? __pmd_alloc+0x2c0/0x2c0
[  279.840193]  ? __vfs_write+0xb6/0x350
[  279.840200]  ? kernel_read+0xa0/0xa0
[  279.840244]  ? video_usercopy+0x730/0x730 [videodev]
[  279.840284]  v4l2_ioctl+0xa1/0xb0 [videodev]
[  279.840295]  do_vfs_ioctl+0x117/0x8a0
[  279.840303]  ? selinux_file_ioctl+0x211/0x2f0
[  279.840313]  ? ioctl_preallocate+0x120/0x120
[  279.840319]  ? selinux_capable+0x20/0x20
[  279.840332]  ksys_ioctl+0x70/0x80
[  279.840342]  __x64_sys_ioctl+0x3d/0x50
[  279.840351]  do_syscall_64+0x6d/0x1c0
[  279.840361]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  279.840367] RIP: 0033:0x7fdfb46275d7
[  279.840369] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48
[  279.840474] RSP: 002b:00007ffee1179038 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[  279.840483] RAX: ffffffffffffffda RBX: 00007ffee1179180 RCX: 00007fdfb46275d7
[  279.840488] RDX: 00007ffee11790c0 RSI: 00000000c02c5625 RDI: 0000000000000003
[  279.840493] RBP: 0000000000000002 R08: 0000000000000020 R09: 00000000009f0902
[  279.840497] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffee117a5a0
[  279.840501] R13: 00007ffee11790c0 R14: 0000000000000002 R15: 0000000000000000

[  279.840515] The buggy address belongs to the variable:
[  279.840535]  tvp5150_test_patterns+0x10/0xffffffffffffe360 [tvp5150]

Fixes: c43875f6 ("[media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control")
Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f823ce2a1202d47110a7ef86b65839f0be8adc38 upstream.

Follow the V4L2 spec, as warned by v4l2-compliance:

	warn: v4l2-test-formats.cpp(732): TRY_FMT cannot handle an invalid pixelformat.
	warn: v4l2-test-formats.cpp(733): This may or may not be a problem. For more information see:

warn: v4l2-test-formats.cpp(734): http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html

Cc: stable@vger.kernel.org
Fixes: bddcf633 ("V4L/DVB (9927): em28xx: use a more standard way to specify video formats")
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 490d84f6d73c12f4204241cff8651eed60aae914 upstream.

If the wait for completion was interrupted, then make sure to cancel
any delayed work.

This can only happen if a transmit is waiting for a reply, and you press
Ctrl-C or reboot/poweroff or something like that which interrupts the
thread waiting for the reply and then proceeds to delete the CEC message.

Since the delayed work wasn't canceled, once it would trigger it referred
to stale data and resulted in a kernel oops.

Fixes: 7ec2b3b941a6 ("cec: add new tx/rx status bits to detect aborts/timeouts")
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.18 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7d867a1b765e2b70815fec4964d7822a976ed349 upstream.

The calculation of the Signal Free Time in the framework was not
correct. If a message was received, then the next transmit should be
considered a New Initiator and use a shorter SFT value.

This was not done with the result that if both sides where continually
sending messages, they both could use the same SFT value and one side
could deny the other side access to the bus.

Note that this fix does not take the corner case into account where
a receive is in progress when you call adap_transmit.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.18 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7ec2b3b941a666a942859684281b5f6460a0c234 upstream.

If the HDMI cable is disconnected or the CEC adapter is manually
unconfigured, then all pending transmits and wait-for-replies are
aborted. Signal this with new status bits (CEC_RX/TX_STATUS_ABORTED).

If due to (usually) a driver bug a transmit never ends (i.e. the
transmit_done was never called by the driver), then when this times
out the message is marked with CEC_TX_STATUS_TIMEOUT.

This should not happen and is an indication of a driver bug.

Without a separate status bit for this it was impossible to detect
this from userspace.

The 'transmit timed out' kernel message is now a warning, so this
should be more prominent in the kernel log as well.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.18 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6cc4a0863c9709c512280c64e698d68443ac8053 upstream.

info->nr_rings isn't adjusted in case of ENOMEM error from
negotiate_mq(). This leads to kernel panic in error path.

Typical call stack involving panic -
 #8 page_fault at ffffffff8175936f
    [exception RIP: blkif_free_ring+33]
    RIP: ffffffffa0149491  RSP: ffff8804f7673c08  RFLAGS: 00010292
 ...
 #9 blkif_free at ffffffffa0149aaa [xen_blkfront]
 #10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront]
 #11 blkback_changed at ffffffffa014ea8b [xen_blkfront]
 #12 xenbus_otherend_changed at ffffffff81424670
 #13 backend_changed at ffffffff81426dc3
 #14 xenwatch_thread at ffffffff81422f29
 #15 kthread at ffffffff810abe6a
 #16 ret_from_fork at ffffffff81754078

Cc: stable@vger.kernel.org
Fixes: 7ed8ce1c ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs")
Signed-off-by: NManjunath Patil <manjunath.b.patil@oracle.com>
Acked-by: NRoger Pau Monné <roger.pau@citrix.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3941552aec1e04d63999988a057ae09a1c56ebeb upstream.

Currently the size of hypercall buffers allocated via
/dev/xen/hypercall is limited to a default of 64 memory pages. For live
migration of guests this might be too small as the page dirty bitmask
needs to be sized according to the size of the guest. This means
migrating a 8GB sized guest is already exhausting the default buffer
size for the dirty bitmap.

There is no sensible way to set a sane limit, so just remove it
completely. The device node's usage is limited to root anyway, so there
is no additional DOS scenario added by allowing unlimited buffers.

While at it make the error path for the -ENOMEM case a little bit
cleaner by setting n_pages to the number of successfully allocated
pages instead of the target size.

Fixes: c51b3c63 ("xen: add new hypercall buffer mapping device")
Cc: <stable@vger.kernel.org> #4.18
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d3132b3860f6cf35ff7609a76bbcdbb814bd027c upstream.

Commit a856531951dc80 ("xen: make xen_qlock_wait() nestable")
introduced a regression for Xen guests running fully virtualized
(HVM or PVH mode). The Xen hypervisor wouldn't return from the poll
hypercall with interrupts disabled in case of an interrupt (for PV
guests it does).

So instead of disabling interrupts in xen_qlock_wait() use a nesting
counter to avoid calling xen_clear_irq_pending() in case
xen_qlock_wait() is nested.

Fixes: a856531951dc80 ("xen: make xen_qlock_wait() nestable")
Cc: stable@vger.kernel.org
Reported-by: NSander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: NSander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e81bff39489a06384822bb38ce7a59f9e365bbe9 upstream.

The cec_phys_addr_validate() function will be moved to V4L2,
so use a simplified variant of that function in cec-api.c.
cec now no longer calls cec_phys_addr_validate() and it can
be safely moved to V4L2.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.17 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b915bf575d5b7774d0f22d57d6c143e07dcaade2 upstream.

This function is needed by both V4L2 and CEC, so move this to
cec.h as a static inline since there are no obvious shared
modules between the two subsystems.

This patch, together with the following ones, fixes a
dependency bug: if CEC_CORE is disabled, then building adv7604
(and other HDMI receivers) will fail because an essential
function is now stubbed out.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.17 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d5269c4553a64b6882f2c019ae21b783a0984a83 upstream.

In the case that the interrupts fail to result because of the
interrupt-controller not yet being registered the
platform_get_irq_byname() call will fail with -EPROBE_DEFER, but passing
this into devm_request_threaded_irq() will result in -EINVAL being
returned, the driver is therefor not reprobed later.

Fixes: 3b415c8f ("remoteproc: q6v5: Extract common resource handling")
Cc: stable@vger.kernel.org
Reviewed-by: NSibi Sankar <sibis@codeaurora.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1bd54d851f50dea6af30c3e6ff4f3e9aab5558f9 upstream.

kgdboc_option_setup does not check input argument before passing it
to strlen. The argument would be a NULL pointer if "ekgdboc", without
its value, is set in command line and thus cause the following panic.

PANIC: early exception 0xe3 IP 10:ffffffff8fbbb620 error 0 cr2 0x0
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #1
[    0.000000] RIP: 0010:strlen+0x0/0x20
...
[    0.000000] Call Trace
[    0.000000]  ? kgdboc_option_setup+0x9/0xa0
[    0.000000]  ? kgdboc_early_init+0x6/0x1b
[    0.000000]  ? do_early_param+0x4d/0x82
[    0.000000]  ? parse_args+0x212/0x330
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_options+0x20/0x23
[    0.000000]  ? rdinit_setup+0x26/0x26
[    0.000000]  ? parse_early_param+0x2d/0x39
[    0.000000]  ? setup_arch+0x2f7/0xbf4
[    0.000000]  ? start_kernel+0x5e/0x4c2
[    0.000000]  ? load_ucode_bsp+0x113/0x12f
[    0.000000]  ? secondary_startup_64+0xa5/0xb0

This patch adds a check to prevent the panic.

Cc: stable@vger.kernel.org
Cc: jason.wessel@windriver.com
Cc: gregkh@linuxfoundation.org
Cc: jslaby@suse.com
Signed-off-by: NHe Zhe <zhe.he@windriver.com>
Reviewed-by: NDaniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9afc82194de9a1ce298f0d77d7d779d585bf962c upstream.

As pointed at:
	https://bugzilla.kernel.org/show_bug.cgi?id=199323

This patch causes a bad effect on RPi. I suspect that the root
cause is at the USB out of tree RPi driver, with uses high priority
interrupts instead of normal ones. Anyway, as this patch
is mostly a cleanup, better to revert it.

This reverts commit 7d95fb74.

Cc: stable@vger.kernel.org # For Kernel 4.18
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 250854eed5d45a73d81e4137dfd85180af6f2ec3 upstream.

When the OSD is on (i.e. vivid displays text on top of the test pattern), and
you enable hflip, then the driver crashes.

The cause turned out to be a division of a negative number by an unsigned value.
You expect that -8 / 2U would be -4, but in reality it is 2147483644 :-(

Fixes: 3e14e7a8 ("vivid-tpg: add hor/vert downsampling support to tpg_gen_text")
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: <stable@vger.kernel.org>      # for v4.1 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d397dbe606120a1ea1b11b0020c3f7a3852da5ac upstream.

Use the new of_get_compatible_child() helper to lookup the mdio child
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the node of the device being probed).

Fixes: aa09677c ("net: bcmgenet: add MDIO routines")
Cc: stable <stable@vger.kernel.org>     # 3.15
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3f2aa244ee1a0d17ed5b6c86564d2c1b24d1c96b upstream.

Fix a TURBOchannel support regression with commit 205e1b7f
("dma-mapping: warn when there is no coherent_dma_mask") that caused
coherent DMA allocations to produce a warning such as:

defxx: v1.11 2014/07/01  Lawrence V. Stefani and others
tc1: DEFTA at MMIO addr = 0x1e900000, IRQ = 20, Hardware addr = 08-00-2b-a3-a3-29
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 dfx_dev_register+0x670/0x678
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #2
Stack : ffffffff8009ffc0 fffffffffffffec0 0000000000000000 ffffffff80647650
        0000000000000000 0000000000000000 ffffffff806f5f80 ffffffffffffffff
        0000000000000000 0000000000000000 0000000000000001 ffffffff8065d4e8
        98000000031b6300 ffffffff80563478 ffffffff805685b0 ffffffffffffffff
        0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
        0000000000000000 0000000000000009 ffffffff8053efd0 ffffffff806657d0
        0000000000000000 ffffffff803177f8 0000000000000000 ffffffff806d0000
        9800000003078000 980000000307b9e0 000000001e900000 ffffffff80067940
        0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
        ffffffff805176c0 ffffffff8004dc78 0000000000000000 ffffffff80067940
        ...
Call Trace:
[<ffffffff8004dc78>] show_stack+0xa0/0x130
[<ffffffff80067940>] __warn+0x128/0x170
---[ end trace b1d1e094f67f3bb2 ]---

This is because the TURBOchannel bus driver fails to set the coherent
DMA mask for devices enumerated.

Set the regular and coherent DMA masks for TURBOchannel devices then,
observing that the bus protocol supports a 34-bit (16GiB) DMA address
space, by interpreting the value presented in the address cycle across
the 32 `ad' lines as a 32-bit word rather than byte address[1].  The
architectural size of the TURBOchannel DMA address space exceeds the
maximum amount of RAM any actual TURBOchannel system in existence may
have, hence both masks are the same.

This removes the warning shown above.

References:

[1] "TURBOchannel Hardware Specification", EK-369AA-OD-007B, Digital
    Equipment Corporation, January 1993, Section "DMA", pp. 1-15 -- 1-17
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20835/
Fixes: 205e1b7f ("dma-mapping: warn when there is no coherent_dma_mask")
Cc: stable@vger.kernel.org # 4.16+
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7d321bd3542500caf125249f44dc37cb4e738013 upstream.

The IO-pgtable code relies on the driver TLB invalidation callbacks to
ensure that all page-table updates are visible to the IOMMU page-table
walker.

In the case that the page-table walker is cache-coherent, we cannot rely
on an implicit DSB from the DMA-mapping code, so we must ensure that we
execute a DSB in our tlb_add_flush() callback prior to triggering the
invalidation.

Cc: <stable@vger.kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 2df7a25c ("iommu/arm-smmu: Clean up DMA API usage")
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6f8e45f7eb1bee5efdbe4a9cfe4a45627403c5fb upstream.

The AFU Information DVSEC capability is a means to extract common,
general information about all of the AFUs associated with a Function
independent of the specific functionality that each AFU provides.
Write in the AFU Index field allows to access to the descriptor data
for each AFU.

With the current code, we are not able to access to these specific data
when the index >= 1 because we are writing to the wrong location.
All requests to the data of each AFU are pointing to those of the AFU 0,
which could have impacts when using a card with more than one AFU per
function.

This patch fixes the access to the AFU Descriptor Data indexed by the
AFU Info Index field.

Fixes: 5ef3166e ("ocxl: Driver code for 'generic' opencapi devices")
Cc: stable <stable@vger.kernel.org>     # 4.16
Signed-off-by: NChristophe Lombard <clombard@linux.vnet.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

commit 9844fb2e351311210e6660a9a1c62d17424a6145 upstream.

Use the new of_get_compatible_child() helper to lookup the usb sibling
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(non-sibling) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent device node).

While at it, also fix the related phy-node reference leak.

Fixes: f5e4edb8 ("power: twl4030_charger: find associated phy by more reliable means.")
Cc: stable <stable@vger.kernel.org>     # 4.2
Cc: NeilBrown <neilb@suse.de>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bc51098cdd9573bfdecfd02fc8ed474419d73ea0 upstream.

Fix a problem with commit 311ee9c1 ("rtc: cmos: allow using ACPI for
RTC alarm instead of HPET") defining `use_acpi_alarm' module parameter
even for non-ACPI platforms, which ignore it.  Wrap the definition into
#ifdef CONFIG_ACPI and use a static inline wrapper function, hardcoded
to return 0 and consequently optimized away for !ACPI, following the
existing pattern with HPET handling functions.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Fixes: 311ee9c1 ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>