Other than ix86, x86-64 on EFI so far didn't set the
{g,s}et_wallclock accessors to the EFI routines, thus
incorrectly using raw RTC accesses instead.

Simply removing the #ifdef around the respective code isn't
enough, however: While so far early get-time calls were done in
physical mode, this doesn't work properly for x86-64, as virtual
addresses would still need to be set up for all runtime regions
(which wasn't the case on the system I have access to), so
instead the patch moves the call to efi_enter_virtual_mode()
ahead (which in turn allows to drop all code related to calling
efi-get-time in physical mode).

Additionally the earlier calling of efi_set_executable()
requires the CPA code to cope, i.e. during early boot it must be
avoided to call cpa_flush_array(), as the first thing this
function does is a BUG_ON(irqs_disabled()).

Also make the two EFI functions in question here static -
they're not being referenced elsewhere.

History:

    This commit was originally merged as bacef661 ("x86-64/efi:
    Use EFI to deal with platform wall clock") but it resulted in some
    ASUS machines no longer booting due to a firmware bug, and so was
    reverted in f026cfa8. A pre-emptive fix for the buggy ASUS
    firmware was merged in 03a1c254975e ("x86, efi: 1:1 pagetable
    mapping for virtual EFI calls") so now this patch can be
    reapplied.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Tested-by: NMatt Fleming <matt.fleming@intel.com>
Acked-by: NMatthew Garrett <mjg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com> [added commit history]

For TXT boot, while Linux kernel trys to shutdown/S3/S4/reboot, it
need to jump back to tboot code and do TXT teardown work. Previously
kernel zapped all mem page identity mapping (va=pa) after booting, so
tboot code mem address was mapped again with identity mapping. Now
kernel didn't zap the identity mapping page table, so tboot related
code can remove the remapping code before trapping back now.
Signed-off-by: NXiaoyan Zhang <xiaoyan.zhang@intel.com>
Acked-by: NGang Wei <gang.wei@intel.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Some firmware still needs a 1:1 (virt->phys) mapping even after we've
called SetVirtualAddressMap(). So install the mapping alongside our
existing kernel mapping whenever we make EFI calls in virtual mode.

This bug was discovered on ASUS machines where the firmware
implementation of GetTime() accesses the RTC device via physical
addresses, even though that's bogus per the UEFI spec since we've
informed the firmware via SetVirtualAddressMap() that the boottime
memory map is no longer valid.

This bug seems to be present in a lot of consumer devices, so there's
not a lot we can do about this spec violation apart from workaround
it.

Cc: JérômeCarretero <cJ-ko@zougloub.eu>
Cc: Vasco Dias <rafa.vasco@gmail.com>
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

There are various pieces of code in arch/x86 that require a page table
with an identity mapping. Make trampoline_pgd a proper kernel page
table, it currently only includes the kernel text and module space
mapping.

One new feature of trampoline_pgd is that it now has mappings for the
physical I/O device addresses, which are inserted at ioremap()
time. Some broken implementations of EFI firmware require these
mappings to always be around.
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

UEFI variable filesystem need a new mount point, so this patch add
efivars kobject to efi_kobj for create a /sys/firmware/efi/efivars
folder.

Cc: Matthew Garrett <mjg@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

A write to an efivarfs file will not always result in a variable of
'count' size after the EFI SetVariable() call. We may have appended to
the existing data (ie, with the EFI_VARIABLE_APPEND_WRITE attribute), or
even have deleted the variable (with an authenticated variable update,
with a zero datasize).

This change re-reads the updated variable from firmware, to check for
size changes and deletions. In the latter case, we need to drop the
dentry.
Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The existing EFI variables code only supports variables of up to 1024
bytes. This limitation existed in version 0.99 of the EFI specification,
but was removed before any full releases. Since variables can now be
larger than a single page, sysfs isn't the best interface for this. So,
instead, let's add a filesystem. Variables can be read, written and
created, with the first 4 bytes of each variable representing its UEFI
attributes. The create() method doesn't actually commit to flash since
zero-length variables can't exist per-spec.

Updates from Jeremy Kerr <jeremy.kerr@canonical.com>.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Pull MIPS update from Ralf Baechle:
 "Cleanups and fixes for breakage that occured earlier during this merge
  phase.  Also a few patches that didn't make the first pull request.
  Of those is the Alchemy work that merges code for many of the SOCs and
  evaluation boards thus among other code shrinkage, reduces the number
  of MIPS defconfigs by 5."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits)
  MIPS: SNI: Switch RM400 serial to SCCNXP driver
  MIPS: Remove unused empty_bad_pmd_table[] declaration.
  MIPS: MT: Remove kspd.
  MIPS: Malta: Fix section mismatch.
  MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets.
  MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code.
  MIPS: Alchemy: merge PB1550 support into DB1550 code
  MIPS: Alchemy: Single kernel for DB1200/1300/1550
  MIPS: Optimize TLB refill for RI/XI configurations.
  MIPS: proc: Cleanup printing of ASEs.
  MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required.
  MIPS: Add detection of DSP ASE Revision 2.
  MIPS: Optimize pgd_init and pmd_init
  MIPS: perf: Add perf functionality for BMIPS5000
  MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP
  MIPS: perf: Remove unnecessary #ifdef
  MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt)
  MIPS: perf: Change the "mips_perf_event" table unsupported indicator.
  MIPS: Align swapper_pg_dir to 64K for better TLB Refill code.
  vmlinux.lds.h: Allow architectures to add sections to the front of .bss
  ...

Pull module signing support from Rusty Russell:
 "module signing is the highlight, but it's an all-over David Howells frenzy..."

Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG.

* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits)
  X.509: Fix indefinite length element skip error handling
  X.509: Convert some printk calls to pr_devel
  asymmetric keys: fix printk format warning
  MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking
  MODSIGN: Make mrproper should remove generated files.
  MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs
  MODSIGN: Use the same digest for the autogen key sig as for the module sig
  MODSIGN: Sign modules during the build process
  MODSIGN: Provide a script for generating a key ID from an X.509 cert
  MODSIGN: Implement module signature checking
  MODSIGN: Provide module signing public keys to the kernel
  MODSIGN: Automatically generate module signing keys if missing
  MODSIGN: Provide Kconfig options
  MODSIGN: Provide gitignore and make clean rules for extra files
  MODSIGN: Add FIPS policy
  module: signature checking hook
  X.509: Add a crypto key parser for binary (DER) X.509 certificates
  MPILIB: Provide a function to read raw data into an MPI
  X.509: Add an ASN.1 decoder
  X.509: Add simple ASN.1 grammar compiler
  ...

The hostprogs need access to the CONFIG_* symbols found in
include/generated/autoconf.h.  But commit abbf1590 ("UAPI: Partition
the header include path sets and add uapi/ header directories") replaced
$(LINUXINCLUDE) with $(USERINCLUDE) which doesn't contain the necessary
include paths.

This has the undesirable effect of breaking the EFI boot stub because
the #ifdef CONFIG_EFI_STUB code in arch/x86/boot/tools/build.c is
never compiled.

It should also be noted that because $(USERINCLUDE) isn't exported by
the top-level Makefile it's actually empty in arch/x86/boot/Makefile.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The UAPI commits forgot to test tooling builds such as tools/perf/,
and this fixes the fallout.

Manual conversion.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull ARM update from Russell King:
 "This is the final round of stuff for ARM, left until the end of the
  merge window to reduce the number of conflicts.  This set contains the
  ARM part of David Howells UAPI changes, and a fix to the ordering of
  'select' statements in ARM Kconfig files (see the appropriate commit
  for why this happened - thanks to Andrew Morton for pointing out the
  problem.)

  I've left this as long as I dare for this window to avoid conflicts,
  and I regenerated the config patch yesterday, posting it to our
  mailing list for review and testing.  I have several acks which
  include successful test reports for it.

  However, today I notice we've got new conflicts with previously unseen
  code...  though that conflict should be trivial (it's my changes vs a
  one liner.)"

* 'late-for-linus' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: config: make sure that platforms are ordered by option string
  ARM: config: sort select statements alphanumerically
  UAPI: (Scripted) Disintegrate arch/arm/include/asm

Fix up fairly conflict in arch/arm/Kconfig (the select re-organization
vs recent addition of GENERIC_KERNEL_EXECVE)

Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells:
 "The patches contained herein do the following:

 (1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI.  I checked
     this with Paul Mackerras before I created the patch and he suggested some
     extra bits to unexport.

 (2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace
     applicable, and remove from the UAPI that part of linux/fs.h that was the
     reason for linux/blk_types.h being exported in the first place.  I
     discussed this with Jens Axboe before creating the patch.

 (3) The big patch of the series to disintegrate include/linux/*.h as a unit.
     This could be split up, though there would be collisions in moving stuff
     between the two Kbuild files when the parts are merged as that file is
     sorted alphabetically rather than being grouped by subsystem.

     Of this set of headers, 17 files have changed in the UAPI exported region
     since the 4th and only 8 since the 9th so there isn't much change in this
     area - as one might expect.

     It should be pretty obvious and straightforward if it does come to fixing
     up: stuff in __KERNEL__ guards stays where it is and stuff outside moves
     to the same file in the include/uapi/linux/ directory.

     If a new file appears then things get a bit more complicated as the
     "headers +=" line has to move to include/uapi/linux/Kbuild.  Only one new
     file has appeared since the 9th and I judge this type of event relatively
     unlikely.

 (4) A patch to disintegrate include/linux/byteorder/*.h as a unit.

  Signed-off-by: David Howells <dhowells@redhat.com>"

* tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/linux/byteorder
  UAPI: (Scripted) Disintegrate include/linux
  UAPI: Unexport linux/blk_types.h
  UAPI: Unexport part of linux/ppp-comp.h

Pull spi UAPI disintegration from David Howells:
 "This is to complete part of the Userspace API (UAPI) disintegration
  for which the preparatory patches were pulled recently.  After these
  patches, userspace headers will be segregated into:

        include/uapi/linux/.../foo.h

  for the userspace interface stuff, and:

        include/linux/.../foo.h

  for the strictly kernel internal stuff.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
  Acked-by: Grant Likely <grant.likely@secretlab.ca>"

* tag 'disintegrate-spi-20121009' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/linux/spi

Pull OpenRISC uapi disintegration from Jonas Bonn:
 "OpenRISC UAPI disintegration work from David Howells"

* tag 'openrisc-uapi' of git://openrisc.net/jonas/linux:
  UAPI: (Scripted) Disintegrate arch/openrisc/include/asm

Pull user namespace compile fixes from Eric W Biederman:
 "This tree contains three trivial fixes.  One compiler warning, one
  thinko fix, and one build fix"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  btrfs: Fix compilation with user namespace support enabled
  userns: Fix posix_acl_file_xattr_userns gid conversion
  userns: Properly print bluetooth socket uids

Pull md updates from NeilBrown:
 - "discard" support, some dm-raid improvements and other assorted bits
   and pieces.

* tag 'md-3.7' of git://neil.brown.name/md: (29 commits)
  md: refine reporting of resync/reshape delays.
  md/raid5: be careful not to resize_stripes too big.
  md: make sure manual changes to recovery checkpoint are saved.
  md/raid10: use correct limit variable
  md: writing to sync_action should clear the read-auto state.
  Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid races
  md/raid5: make sure to_read and to_write never go negative.
  md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write.
  md/raid5: protect debug message against NULL derefernce.
  md/raid5: add some missing locking in handle_failed_stripe.
  MD: raid5 avoid unnecessary zero page for trim
  MD: raid5 trim support
  md/bitmap:Don't use IS_ERR to judge alloc_page().
  md/raid1: Don't release reference to device while handling read error.
  raid: replace list_for_each_continue_rcu with new interface
  add further __init annotations to crypto/xor.c
  DM RAID: Fix for "sync" directive ineffectiveness
  DM RAID: Fix comparison of index and quantity for "rebuild" parameter
  DM RAID: Add rebuild capability for RAID10
  DM RAID: Move 'rebuild' checking code to its own function
  ...

The large platform selection choice should be sorted by option string
so it's easy to find the platform you're looking for.  Fix the few
options which are out of this order.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

As suggested by Andrew Morton:

  This is a pet peeve of mine.  Any time there's a long list of items
  (header file inclusions, kconfig entries, array initalisers, etc) and
  someone wants to add a new item, they *always* go and stick it at the
  end of the list.

  Guys, don't do this.  Either put the new item into a randomly-chosen
  position or, probably better, alphanumerically sort the list.

lets sort all our select statements alphanumerically.  This commit was
created by the following perl:

while (<>) {
	while (/\\\s*$/) {
		$_ .= <>;
	}
	undef %selects if /^\s*config\s+/;
	if (/^\s+select\s+(\w+).*/) {
		if (defined($selects{$1})) {
			if ($selects{$1} eq $_) {
				print STDERR "Warning: removing duplicated $1 entry\n";
			} else {
				print STDERR "Error: $1 differently selected\n".
					"\tOld: $selects{$1}\n".
					"\tNew: $_\n";
				exit 1;
			}
		}
		$selects{$1} = $_;
		next;
	}
	if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
			  /^endif/ or /^endchoice/)) {
		foreach $k (sort (keys %selects)) {
			print "$selects{$k}";
		}
		undef %selects;
	}
	print;
}
if (%selects) {
	foreach $k (sort (keys %selects)) {
		print "$selects{$k}";
	}
}

It found two duplicates:

Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry

and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.

We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: NJason Cooper <jason@lakedaemon.net>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

It seems that was linux/blk_types.h incorrectly exported to fix up some missing
bits required by the exported parts of linux/fs.h (READ, WRITE, READA, etc.).

So unexport linux/blk_types.h and unexport the relevant bits of linux/fs.h.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Jens Axboe <jaxboe@fusionio.com>
cc: Tejun Heo <tj@kernel.org>
cc: Al Viro <viro@ZenIV.linux.org.uk>

Unexport part of linux/ppp-comp.h as userspace can't make use of that bit.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Paul Mackerras <paulus@samba.org>
cc: David Miller <davem@davemloft.net>

UAPI Disintegration 2012-10-09

* tag 'disintegrate-openrisc-20121009' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate arch/openrisc/include/asm

Pull TPM bugfixes from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  tpm: Propagate error from tpm_transmit to fix a timeout hang
  driver/char/tpm: fix regression causesd by ppi

Pull ACPI & Thermal updates from Len Brown:
 "The generic Linux thermal layer is gaining some new capabilities
  (generic cooling via cpufreq) and some new customers (ARM).

  Also, an ACPI EC bug fix plus a regression fix."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (30 commits)
  tools/power/acpi/acpidump: remove duplicated include from acpidump.c
  ACPI idle, CPU hotplug: Fix NULL pointer dereference during hotplug
  cpuidle / ACPI: fix potential NULL pointer dereference
  ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop
  ACPI: EC: Make the GPE storm threshold a module parameter
  thermal: Exynos: Fix NULL pointer dereference in exynos_unregister_thermal()
  Thermal: Fix bug on cpu_cooling, cooling device's id conflict problem.
  thermal: exynos: Use devm_* functions
  ARM: exynos: add thermal sensor driver platform data support
  thermal: exynos: register the tmu sensor with the kernel thermal layer
  thermal: exynos5: add exynos5250 thermal sensor driver support
  hwmon: exynos4: move thermal sensor driver to driver/thermal directory
  thermal: add generic cpufreq cooling implementation
  Fix a build error.
  thermal: Fix potential NULL pointer accesses
  thermal: add Renesas R-Car thermal sensor support
  thermal: fix potential out-of-bounds memory access
  Thermal: Introduce locking for cdev.thermal_instances list.
  Thermal: Unify the code for both active and passive cooling
  Thermal: Introduce simple arbitrator for setting device cooling state
  ...

Pull OpenRISC updates from Jonas Bonn:
 "Fixups for some corner cases, build issues, and some obvious bugs in
  IRQ handling.  No major changes."

* tag 'for-3.7' of git://openrisc.net/jonas/linux:
  openrisc: mask interrupts in irq_mask_ack function
  openrisc: fix typos in comments and warnings
  openrisc: PIC should act on domain-local irqs
  openrisc: Make cpu_relax() invoke barrier()
  audit: define AUDIT_ARCH_OPENRISC
  openrisc: delay: fix handling of counter overflow
  openrisc: delay: fix loops calculation for __const_udelay

Merge tag 'disintegrate-misc-arches-20121010' of git://git.infradead.org/users/dhowells/linux-headers

Pull UAPI disintegration for misc arches from David Howells:
 "UAPI disintegration for MN10300, FRV and AVR32 arches"

* tag 'disintegrate-misc-arches-20121010' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate arch/mn10300/include/asm
  UAPI: (Scripted) Disintegrate arch/frv/include/asm
  UAPI: (Scripted) Disintegrate arch/avr32/include/asm

Pull powerpc uapi disintegration from Benjamin Herrenschmidt.

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  UAPI: (Scripted) Disintegrate arch/powerpc/include/asm

Pull arm64 uapi disintegration from Catalin Marinas:
 "UAPI headers for arm64 together with some clean-up to make it
  possible:
   - Do not export the COMPAT_* definitions to user
   - Simplify the compat unistd32.h definitions and remove the
     __SYSCALL_COMPAT guard
   - Disintegrate the arch/arm64/include/asm/* headers"

* tag 'arm64-uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  UAPI: (Scripted) Disintegrate arch/arm64/include/asm
  arm64: Do not export the compat-specific definitions to the user
  arm64: Do not include asm/unistd32.h in asm/unistd.h
  arm64: Remove unused definitions from asm/unistd32.h

Pull C6X UAPI disintegration from Mark Salter:

 - scripted UAPI disintegration by David Howells.

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  UAPI: (Scripted) Disintegrate arch/c6x/include/asm

Pull KGDB/KDB fixes and cleanups from Jason Wessel:
 "Cleanups
   - Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c
   - Add module event hooks for simplified debugging with gdb
 Fixes
   - Fix kdb to stop paging with 'q' on bta and dmesg
   - Fix for data that scrolls off the vga console due to line wrapping
     when using the kdb pager
 New
   - The debug core registers for kernel module events which allows a
     kernel aware gdb to automatically load symbols and break on entry
     to a kernel module
   - Allow kgdboc=kdb to setup kdb on the vga console"

* tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  tty/console: fix warnings in drivers/tty/serial/kgdboc.c
  kdb,vt_console: Fix missed data due to pager overruns
  kdb: Fix dmesg/bta scroll to quit with 'q'
  kgdboc: Accept either kbd or kdb to activate the vga + keyboard kdb shell
  kgdb,x86: fix warning about unused variable
  mips,kgdb: fix recursive page fault with CONFIG_KPROBES
  kgdb: Add module event hooks

Merge tag 'stable/for-linus-3.7-uapi-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen UAPI disintegration from Konrad Rzeszutek Wilk:
 "This has the UAPI disintegration work done by David Howells"

* tag 'stable/for-linus-3.7-uapi-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  UAPI: (Scripted) Disintegrate include/xen

Pull two more mmc changes from Chris Ball:

 - Disintegrate UAPI

 - fix a mismerge that caused a build error.

* tag 'mmc-merge-for-3.7-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  UAPI: (Scripted) Disintegrate include/linux/mmc
  mmc: mxs-mmc: Fix merge issue causing build error

Pull device-mapper changes from Alasdair G Kergon:
 "Remove the power-of-2 block size constraint on discards in dm thin
  provisioning and factor the bio_prison code out into a separate module
  (for sharing with the forthcoming cache target).

  Use struct bio's front_pad to eliminate the use of one separate
  mempool by bio-based devices.

  A few other tiny clean-ups."

* tag 'dm-3.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm: store dm_target_io in bio front_pad
  dm thin: move bio_prison code to separate module
  dm thin: prepare to separate bio_prison code
  dm thin: support discard with non power of two block size
  dm persistent data: convert to use le32_add_cpu
  dm: use ACCESS_ONCE for sysfs values
  dm bufio: use list_move
  dm mpath: fix check for null mpio in end_io fn

Pull misc SCSI updates from James Bottomley:
 "This is an assorted set of stragglers into the merge window with
  driver updates for megaraid_sas, lpfc, bfi and mvumi.  It also
  includes some fairly major fixes for virtio-scsi (scatterlist init),
  scsi_debug (off by one error), storvsc (use after free) and qla2xxx
  (potential deadlock).

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (49 commits)
  [SCSI] storvsc: Account for in-transit packets in the RESET path
  [SCSI] qla2xxx: fix potential deadlock on ha->hardware_lock
  [SCSI] scsi_debug: Fix off-by-one bug when unmapping region
  [SCSI] Shorten the path length of scsi_cmd_to_driver()
  [SCSI] virtio-scsi: support online resizing of disks
  [SCSI] virtio-scsi: fix LUNs greater than 255
  [SCSI] virtio-scsi: initialize scatterlist structure
  [SCSI] megaraid_sas: Version, Changelog, Copyright update
  [SCSI] megaraid_sas: Remove duplicate code
  [SCSI] megaraid_sas: Add SystemPD FastPath support
  [SCSI] megaraid_sas: Add array boundary check for SystemPD
  [SCSI] megaraid_sas: Load io_request DataLength in bytes
  [SCSI] megaraid_sas: Add module param for configurable MSI-X vector count
  [SCSI] megaraid_sas: Remove un-needed completion_lock spinlock calls
  [SCSI] lpfc 8.3.35: Update lpfc version for 8.3.35 driver release
  [SCSI] lpfc 8.3.35: Fixed not reporting logical link speed to SCSI midlayer when QoS not on
  [SCSI] lpfc 8.3.35: Fix error with fabric service parameters causing performance issues
  [SCSI] lpfc 8.3.35: Fixed SCSI host create showing wrong link speed on SLI3 HBA ports
  [SCSI] lpfc 8.3.35: Fixed not checking solicition in progress bit when verifying FCF record for use
  [SCSI] lpfc 8.3.35: Fixed messages for misconfigured port errors
  ...

Pull input layer updates from Dmitry Torokhov:
 "2nd round of updates for the input subsystem.  With it input core no
  longer limits number of character devices per event handler (such as
  evdev) to 32, but switches to dynamic minors once legacy range is
  exhausted.  This should get multi-seat installations that currently
  run our of event devices very quickly.

  You will also get an update for Wacom driver and a couple of driver
  fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: extend the number of event (and other) devices
  Input: mousedev - mark mousedev interfaces as non-seekable
  Input: mousedev - rename mixdev_open to opened_by_mixdev
  Input: mousedev - reformat structure initializers
  Input: mousedev - factor out psaux code to reduce #ifdefery
  Input: samsung-keypad - add clk_prepare and clk_unprepare
  Input: atmel_mxt_ts - simplify mxt_dump_message
  Input: wacom - clean up wacom_query_tablet_data
  Input: wacom - introduce wacom_fix_phy_from_hid
  Input: wacom - allow any multi-input Intuos device to set prox
  Input: wacom - report correct touch contact size for I5/Bamboo