commit 22f96b3808c12a218e9a3bce6e1bfbd74efbe374 upstream.

This just pulls out the ksys_sync_file_range() code to work on a struct
file instead of an fd, so we can use it elsewhere.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit de0617e467171ba44c73efd1ba63f101b164a035 upstream.

There are no ordering constraints between the submission and completion
side of io_uring. But sometimes that would be useful to have. One common
example is doing an fsync, for instance, and have it ordered with
previous writes. Without support for that, the application must do this
tracking itself.

This adds a general SQE flag, IOSQE_IO_DRAIN. If a command is marked
with this flag, then it will not be issued before previous commands have
completed, and subsequent commands submitted after the drain will not be
issued before the drain is started.. If there are no pending commands,
setting this flag will not change the behavior of the issue of the
command.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

Fix the following build warnings:
  fs/jbd2/transaction.o: In function `jbd2_journal_stop':
  (.text+0x2934): undefined reference to `__udivdi3'
  (.text+0x2970): undefined reference to `__udivdi3'

Fixes: 861575c9 ("alinux: jbd2: track slow handle which is preventing transaction committing")
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 05794eff1aa6060248bfca34ee936c613f94a942 upstream.

Initializing structures with { } is known to be problematic since
it doesn't necessararily initialize all bytes, in case of padding,
causing random failures when structures are memcmp().

This patch fixes the structure initialisation related compiler
error by memset().

V2: rectified missing piece in coding
Signed-off-by: NShirish S <shirish.s@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NXu Yu <xuyu@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit 3e77eeb7a27fc3dcf6b65e7ee01ac00bf5d2b4fb upstream.

Commit 36a2ba07757d ("ACPI/IORT: Reject platform device creation on NUMA
node mapping failure") introduced a local variable 'node' in
arm_smmu_v3_set_proximity() that shadows the struct acpi_iort_node
pointer function parameter.

Execution was unaffected but it is prone to errors and can lead
to subtle bugs.

Rename the local variable to prevent any issue.
Reviewed-by: NHanjun Guo <guohanjun@huawei.com>
Reported-by: NWill Deacon <will@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: Zou Cao<zoucao@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit 342be1068d9b5b1fd364d270b4f731764e23de2b upstream.

We try to find a free LPI region in device's lpi_map and allocate them
(set them to 1) when we want to allocate LPIs for this device. This is
what bitmap_find_free_region() has done for us. The following set_bit
is redundant and a bit confusing (since we only set_bit against the first
allocated LPI idx). Remove it, and make the set_bit explicit by comment.
Signed-off-by: NZenghui Yu <yuzenghui@huawei.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: Zou Cao<zoucao@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit 24062fe85860debfdae0eeaa495f27c9971ec163 upstream

HiSilicon erratum 162001800 describes the limitation of
SMMUv3 PMCG implementation on HiSilicon Hip08 platforms.

On these platforms, the PMCG event counter registers
(SMMU_PMCG_EVCNTRn) are read only and as a result it
is not possible to set the initial counter period value
on event monitor start.

To work around this, the current value of the counter
is read and used for delta calculations. OEM information
from ACPI header is used to identify the affected hardware
platforms.
Signed-off-by: NShameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: NHanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Acked-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[will: update silicon-errata.txt and add reason string to acpi match]
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: Zou Cao<zoucao@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit f202cdab3b48d8c2c1846c938ea69cb8aa897699 upstream

This adds support for MSI-based counter overflow interrupt.
Signed-off-by: NShameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: Zou Cao<zoucao@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit 7d839b4b9e00645e49345d6ce5dfa8edf53c1a21 upstream

Adds a new driver to support the SMMUv3 PMU and add it into the
perf events framework.

Each SMMU node may have multiple PMUs associated with it, each of
which may support different events.

SMMUv3 PMCG devices are named as smmuv3_pmcg_<phys_addr_page> where
<phys_addr_page> is the physical page address of the SMMU PMCG
wrapped to 4K boundary. For example, the PMCG at 0xff88840000 is
named smmuv3_pmcg_ff88840

Filtering by stream id is done by specifying filtering parameters
with the event. options are:
   filter_enable    - 0 = no filtering, 1 = filtering enabled
   filter_span      - 0 = exact match, 1 = pattern match
   filter_stream_id - pattern to filter against

Example: perf stat -e smmuv3_pmcg_ff88840/transaction,filter_enable=1,
                       filter_span=1,filter_stream_id=0x42/ -a netperf

Applies filter pattern 0x42 to transaction events, which means events
matching stream ids 0x42 & 0x43 are counted as only upper StreamID
bits are required to match the given filter. Further filtering
information is available in the SMMU documentation.

SMMU events are not attributable to a CPU, so task mode and sampling
are not supported.
Signed-off-by: NNeil Leeder <nleeder@codeaurora.org>
Signed-off-by: NShameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
[will: fold in review feedback from Robin]
[will: rewrite Kconfig text and allow building as a module]
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: Zou Cao<zoucao@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit 24e516049360eda85cf3fe9903221d43886c2689 upstream.

Add support for the SMMU Performance Monitor Counter Group
information from ACPI. This is in preparation for its use
in the SMMUv3 PMU driver.
Signed-off-by: NNeil Leeder <nleeder@codeaurora.org>
Signed-off-by: NHanjun Guo <guohanjun@huawei.com>
Signed-off-by: NShameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Acked-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: Zou Cao<zoucao@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit c4b17afb0a4e8d042320efaf2acf55cb26795f78 upstream.

Change function __iommu_dma_alloc_pages() to allocate pages for DMA from
respective device NUMA node. The ternary operator which would be for
alloc_pages_node() is tidied along with this.

The motivation for this change is to have a policy for page allocation
consistent with direct DMA mapping, which attempts to allocate pages local
to the device, as mentioned in [1].

In addition, for certain workloads it has been observed a marginal
performance improvement. The patch caused an observation of 0.9% average
throughput improvement for running tcrypt with HiSilicon crypto engine.

We also include a modification to use kvzalloc() for kzalloc()/vzalloc()
combination.

[1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1692998.htmlSigned-off-by: NGanapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
[JPG: Added kvzalloc(), drop pages ** being device local, remove ternary operator, update message]
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: Zou Cao<zoucao@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit eca499ab3749a4537dee77ffead47a1a2c0dee19 upstream

Presently the remove_memory() interface is inherently broken.  It tries
to remove memory but panics if some memory is not offline.  The problem
is that it is impossible to ensure that all memory blocks are offline as
this function also takes lock_device_hotplug that is required to change
memory state via sysfs.

So, between calling this function and offlining all memory blocks there
is always a window when lock_device_hotplug is released, and therefore,
there is always a chance for a panic during this window.

Make this interface to return an error if memory removal fails.  This
way it is safe to call this function without panicking machine, and also
makes it symmetric to add_memory() which already returns an error.

Link: http://lkml.kernel.org/r/20190517215438.6487-3-pasha.tatashin@soleen.comSigned-off-by: NPavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nyinhe <yinhe@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>

commit d15e59260f62bd5e0f625cf5f5240f6ffac78ab6 upstream

Patch series "mm: online/offline_pages called w.o. mem_hotplug_lock", v3.

Reading through the code and studying how mem_hotplug_lock is to be used,
I noticed that there are two places where we can end up calling
device_online()/device_offline() - online_pages()/offline_pages() without
the mem_hotplug_lock.  And there are other places where we call
device_online()/device_offline() without the device_hotplug_lock.

While e.g.
	echo "online" > /sys/devices/system/memory/memory9/state
is fine, e.g.
	echo 1 > /sys/devices/system/memory/memory9/online
Will not take the mem_hotplug_lock. However the device_lock() and
device_hotplug_lock.

E.g.  via memory_probe_store(), we can end up calling
add_memory()->online_pages() without the device_hotplug_lock.  So we can
have concurrent callers in online_pages().  We e.g.  touch in
online_pages() basically unprotected zone->present_pages then.

Looks like there is a longer history to that (see Patch #2 for details),
and fixing it to work the way it was intended is not really possible.  We
would e.g.  have to take the mem_hotplug_lock in device/base/core.c, which
sounds wrong.

Summary: We had a lock inversion on mem_hotplug_lock and device_lock().
More details can be found in patch 3 and patch 6.

I propose the general rules (documentation added in patch 6):

1. add_memory/add_memory_resource() must only be called with
   device_hotplug_lock.
2. remove_memory() must only be called with device_hotplug_lock. This is
   already documented and holds for all callers.
3. device_online()/device_offline() must only be called with
   device_hotplug_lock. This is already documented and true for now in core
   code. Other callers (related to memory hotplug) have to be fixed up.
4. mem_hotplug_lock is taken inside of add_memory/remove_memory/
   online_pages/offline_pages.

To me, this looks way cleaner than what we have right now (and easier to
verify).  And looking at the documentation of remove_memory, using
lock_device_hotplug also for add_memory() feels natural.

This patch (of 6):

remove_memory() is exported right now but requires the
device_hotplug_lock, which is not exported.  So let's provide a variant
that takes the lock and only export that one.

The lock is already held in
	arch/powerpc/platforms/pseries/hotplug-memory.c
	drivers/acpi/acpi_memhotplug.c
	arch/powerpc/platforms/powernv/memtrace.c

Apart from that, there are not other users in the tree.

Link: http://lkml.kernel.org/r/20180925091457.28651-2-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NPavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NRashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nyinhe <yinhe@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>

This fix the following build warning:

mm/memcontrol.c: In function 'mem_cgroup_idle_page_stats_show':
mm/memcontrol.c:3866:1: warning: the frame size of 2160 bytes is larger than 2048 bytes [-Wframe-larger-than=]

The root cause is that "mem_cgroup_idle_page_stats_show" has two
"struct idle_page_stats" variables, each of which is 1056 bytes in
size, on the stack, thus exceeding the 2048 max frame size.

This fix the build warning by dynamically allocating memory to these two
variables with kmalloc.

Fixes: f55ac551 ("alinux: mm: Support kidled")
Signed-off-by: NXu Yu <xuyu@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit 0e56acae4b4dd4a9fbe897854ab83a109e2a9e11 upstream.

Add yet another iterator, for_each_free_mem_range_in_zone_from, and then
use it to support initializing and freeing pages in groups no larger than
MAX_ORDER_NR_PAGES.  By doing this we can greatly improve the cache
locality of the pages while we do several loops over them in the init and
freeing process.

We are able to tighten the loops further as a result of the "from"
iterator as we can perform the initial checks for first_init_pfn in our
first call to the iterator, and continue without the need for those checks
via the "from" iterator.  I have added this functionality in the function
called deferred_init_mem_pfn_range_in_zone that primes the iterator and
causes us to exit if we encounter any failure.

On my x86_64 test system with 384GB of memory per node I saw a reduction
in initialization time from 1.85s to 1.38s as a result of this patch.

Link: http://lkml.kernel.org/r/20190405221231.12227.85836.stgit@localhost.localdomainSigned-off-by: NAlexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: NPavel Tatashin <pasha.tatashin@soleen.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <yi.z.zhang@linux.intel.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 837566e7e08e3f89444166444836a8a49b9f9322 upstream.

Introduce a new iterator for_each_free_mem_pfn_range_in_zone.

This iterator will take care of making sure a given memory range provided
is in fact contained within a zone.  It takes are of all the bounds
checking we were doing in deferred_grow_zone, and deferred_init_memmap.
In addition it should help to speed up the search a bit by iterating until
the end of a range is greater than the start of the zone pfn range, and
will exit completely if the start is beyond the end of the zone.

Link: http://lkml.kernel.org/r/20190405221225.12227.22573.stgit@localhost.localdomainSigned-off-by: NAlexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: NPavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: NMike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <yi.z.zhang@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 56ec43d8b02719402c9fcf984feb52ec2300f8a5 upstream.

As best as I can tell the meminit_pfn_in_nid call is completely redundant.
The deferred memory initialization is already making use of
for_each_free_mem_range which in turn will call into __next_mem_range
which will only return a memory range if it matches the node ID provided
assuming it is not NUMA_NO_NODE.

I am operating on the assumption that there are no zones or pgdata_t
structures that have a NUMA node of NUMA_NO_NODE associated with them.  If
that is the case then __next_mem_range will never return a memory range
that doesn't match the zone's node ID and as such the check is redundant.

So one piece I would like to verify on this is if this works for ia64.
Technically it was using a different approach to get the node ID, but it
seems to have the node ID also encoded into the memblock.  So I am
assuming this is okay, but would like to get confirmation on that.

On my x86_64 test system with 384GB of memory per node I saw a reduction
in initialization time from 2.80s to 1.85s as a result of this patch.

Link: http://lkml.kernel.org/r/20190405221219.12227.93957.stgit@localhost.localdomainSigned-off-by: NAlexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: NPavel Tatashin <pavel.tatashin@microsoft.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <yi.z.zhang@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 5470dea49f5382257c242ac617d908267727f1a8 upstream.

Patch series "Deferred page init improvements", v7.

This patchset is essentially a refactor of the page initialization logic
that is meant to provide for better code reuse while providing a
significant improvement in deferred page initialization performance.

In my testing on an x86_64 system with 384GB of RAM I have seen the
following.  In the case of regular memory initialization the deferred init
time was decreased from 3.75s to 1.38s on average.  This amounts to a 172%
improvement for the deferred memory initialization performance.

I have called out the improvement observed with each patch.

This patch (of 4):

Use the same approach that was already in use on Sparc on all the
architectures that support a 64b long.

This is mostly motivated by the fact that 7 to 10 store/move instructions
are likely always going to be faster than having to call into a function
that is not specialized for handling page init.

An added advantage to doing it this way is that the compiler can get away
with combining writes in the __init_single_page call.  As a result the
memset call will be reduced to only about 4 write operations, or at least
that is what I am seeing with GCC 6.2 as the flags, LRU pointers, and
count/mapcount seem to be cancelling out at least 4 of the 8 assignments
on my system.

One change I had to make to the function was to reduce the minimum page
size to 56 to support some powerpc64 configurations.

This change should introduce no change on SPARC since it already had this
code.  In the case of x86_64 I saw a reduction from 3.75s to 2.80s when
initializing 384GB of RAM per node.  Pavel Tatashin tested on a system
with Broadcom's Stingray CPU and 48GB of RAM and found that
__init_single_page() takes 19.30ns / 64-byte struct page before this patch
and with this patch it takes 17.33ns / 64-byte struct page.  Mike Rapoport
ran a similar test on a OpenPower (S812LC 8348-21C) with Power8 processor
and 128GB or RAM.  His results per 64-byte struct page were 4.68ns before,
and 4.59ns after this patch.

Link: http://lkml.kernel.org/r/20190405221213.12227.9392.stgit@localhost.localdomainSigned-off-by: NAlexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: NPavel Tatashin <pavel.tatashin@microsoft.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <yi.z.zhang@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 9d6610b76fa374eae3deb93bcbace4a06c2e3b95 upstream.

The ->poll_fn has been stale for a while, as a lot of places check for mq
ops.  But there is no real point in it anyway, as we don't even use
the multipath code for subsystems without multiple ports, which is usually
what we do high performance I/O to.  If it really becomes an issue we
should rework the nvme code to also skip the multipath code for any
private namespace, even if that could mean some trouble when rescanning.
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NShile Zhang <shile.zhang@linux.alibaba-inc.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 1fcb748d187d0c7732a75a509e924ead6d070e04 upstream.

Remove the undefinition of READ and WRITE because these constants may be
used elsewhere in subsequently included header files, thus breaking them.

These constants don't actually appear to be used in the driver, so the
undefinition seems pointless.

Fixes: 4562236b ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit e87eb301bee183d82bb3d04bd71b6660889a2588 upstream.

Just like aio/io_uring, we need to grab 2 refcount for queuing one
request, one is for submission, another is for completion.

If the request isn't queued from plug code path, the refcount grabbed
in generic_make_request() serves for submission. In theroy, this
refcount should have been released after the sumission(async run queue)
is done. blk_freeze_queue() works with blk_sync_queue() together
for avoiding race between cleanup queue and IO submission, given async
run queue activities are canceled because hctx->run_work is scheduled with
the refcount held, so it is fine to not hold the refcount when
running the run queue work function for dispatch IO.

However, if request is staggered into plug list, and finally queued
from plug code path, the refcount in submission side is actually missed.
And we may start to run queue after queue is removed because the queue's
kobject refcount isn't guaranteed to be grabbed in flushing plug list
context, then kernel oops is triggered, see the following race:

blk_mq_flush_plug_list():
        blk_mq_sched_insert_requests()
                insert requests to sw queue or scheduler queue
                blk_mq_run_hw_queue

Because of concurrent run queue, all requests inserted above may be
completed before calling the above blk_mq_run_hw_queue. Then queue can
be freed during the above blk_mq_run_hw_queue().

Fixes the issue by grab .q_usage_counter before calling
blk_mq_sched_insert_requests() in blk_mq_flush_plug_list(). This way is
safe because the queue is absolutely alive before inserting request.

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Tested-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
[Joseph: use the passing 'q' directly]
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 42b1bd33dcdef4ffd98f695e188bab82f9fa46d8 upstream.

Replace BFQ_GROUP_IOSCHED_ENABLED with CONFIG_BFQ_GROUP_IOSCHED.
Code under these ifdefs never worked, something might be broken.

Fixes: 0471559c ("block, bfq: add/remove entity weights correctly")
Reviewed-by: NHolger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 5e27891e88555fecd8262e110e1a29feca4b0166 upstream.

We just allocated the queue and haven't even set it up yet,
hence we know that checking if ->mq_ops is NULL is always
going to be true.

In fact we do need to assign a lock to ->queue_lock always,
as we need it for the queue flags modifications.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 1a67356e9a4829da2935dd338630a550c59c8489 upstream.

It is wrong to use bio->bi_vcnt to figure out how many segments
there are in the bio even though CLONED flag isn't set on this bio,
because this bio may be splitted or advanced.

So always use bio_segments() in blk_recount_segments(), and it shouldn't
cause any performance loss now because the physical segment number is figured
out in blk_queue_split() and BIO_SEG_VALID is set meantime since
bdced438 ("block: setup bi_phys_segments after splitting").
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Fixes: 76d8137a ("blk-merge: recaculate segment if it isn't less than max segments")
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 70fc085c5015c54a7b8742a45fc9ab05d6da90da upstream.

Use dd to test a SCSI device:

  1. echo "blocked" >/sys/block/sda/device/state
  2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10
  3. echo "running" >/sys/block/sda/device/state

dd should finish this work after step 3, but it hangs.

After step2, the call chain is this:

blk_mq_dispatch_rq_list-->scsi_queue_rq-->prep_to_mq

prep_to_mq will return BLK_STS_RESOURCE, and scsi_queue_rq will
transition it to BLK_STS_DEV_RESOURCE which means that driver can
guarantee that IO dispatch will be triggered in future when the
resource is available.  Need to follow the rule if we set the device
state to running.

[mkp: tweaked commit description and code comment as suggested by Bart]
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 4d7c1d3fd7c7eda7dea351f071945e843a46c145 upstream.

If __device_add_disk-->bdi_register_owner-->bdi_register-->
bdi_register_va-->device_create_vargs fails, bdi->dev is still
NULL, __device_add_disk-->register_disk will visit bdi->dev->kobj.
This patch fixes that.
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 4e6db0f21c99c25980c8d183f95cdb6ad64cebd2 upstream.

I recently found some code which called blk_mq_free_map_and_requests()
with a NULL set->tags pointer.  I fixed the caller, but it seems like a
good idea to add a NULL check here as well.  Now we can call:

	blk_mq_free_tag_set(set);
	blk_mq_free_tag_set(set);

twice in a row and it's harmless.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit d6f1dda27251909a27b8d8aacb498628a1047978 upstream.

trace_block_getrq() is to indicate a request struct has been allocated
for queue, so put it in right place.
Reviewed-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 36991ca68db9dd43bac7f3519f080ee3939263ef upstream.

If debugfs were to return a non-NULL error for a debugfs call, using
that pointer later in debugfs_create_files() would crash.

Fix that by properly checking the pointer before referencing it.
Reported-by: NMichal Hocko <mhocko@kernel.org>
Reported-and-tested-by: syzbot+b382ba6a802a3d242790@syzkaller.appspotmail.com
Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 1db4909e76f64a85f4aaa187f0f683f5c85a471d upstream.

Even though .mq_kobj, ctx->kobj and q->kobj share same lifetime
from block layer's view, actually they don't because userspace may
grab one kobject anytime via sysfs.

This patch fixes the issue by the following approach:

1) introduce 'struct blk_mq_ctxs' for holding .mq_kobj and managing
all ctxs

2) free all allocated ctxs and the 'blk_mq_ctxs' instance in release
handler of .mq_kobj

3) grab one ref of .mq_kobj before initializing each ctx->kobj, so that
.mq_kobj is always released after all ctxs are freed.

This patch fixes kernel panic issue during booting when DEBUG_KOBJECT_RELEASE
is enabled.
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit e01ad46d53b59720c6ae69963ee1756506954c85 upstream.

When we try to increate the nr_hw_queues, we may fail due to
shortage of memory or other reason, then blk_mq_realloc_hw_ctxs stops
and some entries in q->queue_hw_ctx are left with NULL. However,
because queue map has been updated with new nr_hw_queues, some cpus
have been mapped to hw queue which just encounters allocation failure,
thus blk_mq_map_queue could return NULL. This will cause panic in
following blk_mq_map_swqueue.

To fix it, when increase nr_hw_queues fails, fallback to previous
nr_hw_queues and post warning. At the same time, driver's .map_queues
usually use completion irq affinity to map hw and cpu, fallback
nr_hw_queues will cause lack of some cpu's map to hw, so use default
blk_mq_map_queues to do that.

Reported-by: syzbot+83e8cbe702263932d9d4@syzkaller.appspotmail.com
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 34d11ffac1f56c3895dad32153abd6814452dc77 upstream.

When the hw queues and mq_map are updated, a hctx could be mapped
to a different numa node. At this moment, we need to realloc the
hctx. If fail to do that, go on using previous hctx.
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 477e19dedc9d3e1f4443a1d4ae00572a988120ea upstream.

blk-mq debugfs and sysfs entries need to be removed before updating
queue map, otherwise, we get get wrong result there. This patch fixes
it and remove the redundant debugfs and sysfs register/unregister
operations during __blk_mq_update_nr_hw_queues.
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit fed84c78527009d4f799a3ed9a566502fa026d82 upstream.

Kmemleak does not play well with KASAN (tested on both HPE Apollo 70 and
Huawei TaiShan 2280 aarch64 servers).

After calling start_kernel()->setup_arch()->kasan_init(), kmemleak early
log buffer went from something like 280 to 260000 which caused kmemleak
disabled and crash dump memory reservation failed.  The multitude of
kmemleak_alloc() calls is from nested loops while KASAN is setting up full
memory mappings, so let early kmemleak allocations skip those
memblock_alloc_internal() calls came from kasan_init() given that those
early KASAN memory mappings should not reference to other memory.  Hence,
no kmemleak false positives.

kasan_init
  kasan_map_populate [1]
    kasan_pgd_populate [2]
      kasan_pud_populate [3]
        kasan_pmd_populate [4]
          kasan_pte_populate [5]
            kasan_alloc_zeroed_page
              memblock_alloc_try_nid
                memblock_alloc_internal
                  kmemleak_alloc

[1] for_each_memblock(memory, reg)
[2] while (pgdp++, addr = next, addr != end)
[3] while (pudp++, addr = next, addr != end && pud_none(READ_ONCE(*pudp)))
[4] while (pmdp++, addr = next, addr != end && pmd_none(READ_ONCE(*pmdp)))
[5] while (ptep++, addr = next, addr != end && pte_none(READ_ONCE(*ptep)))

Link: http://lkml.kernel.org/r/1543442925-17794-1-git-send-email-cai@gmx.usSigned-off-by: NQian Cai <cai@gmx.us>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

While transaction is going to commit, it first sets its state to be
T_LOCKED and waits all outstanding handles to complete, and the
committing transaction will always be in locked state so long as it
has outstanding handles, also the whole fs will be locked and all later
fs modification operations will be stucked in wait_transaction_locked().

It's hard to tell why handles are that slow, so here we add a new staic
tracepoint to track such slow handle, and show io wait time and sched
wait time, output likes below:
  fsstress-20347 [024] ....  1570.305454: jbd2_slow_handle_stats: dev 254,17
tid 15853 type 4 line_no 3101 interval 126 sync 0 requested_blocks 24
dirtied_blocks 0 trans_wait 122 space_wait 0 sched_wait 0 io_wait 126

"trans_wait 122" means that this current committing transaction has been
locked for 122ms, due to this handle is not completed quickly.

From "io_wait 126", we can see that io is the major reason.

In this patch, we also add a per fs control file used to determine
whether a handle can be considered to be slow.
    /proc/fs/jbd2/vdb1-8/stall_thresh
default value is 100ms, users can set new threshold by echoing new value
to this file.

Later I also plan to add a proc file fs per fs to record these info.
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

If one process context is stucked in wait_on_buffer(), lock_buffer(),
lock_page() and wait_on_page_writeback() and wait_on_bit_io(), it's
hard to tell ture reason, for example, whether this page is under io,
or this page is just locked too long by other process context.

Normally io request has multiple bios, and every bio contains multiple
pages which will hold data to be read from or written to device, so here
we record page info or bio info in task_struct while process calls
lock_page(), lock_buffer(), wait_on_page_writeback(), wait_on_buffer()
and wait_on_bit_io(), we add a new proce interface:
[lege@localhost linux]$ cat /proc/4516/wait_res
1 ffffd0969f95d3c0 4295369599 4295381596

Above info means that thread 4516 is waitting on a page, address is
ffffd0969f95d3c0, and has waited for 11997ms.

First field denotes the page address process is waitting on.
Second field denotes the wait moment and the third denotes current moment.

In practice, if we found a process waitting on one page for too long time,
we can get page's address by reading /proc/$pid/wait_page, and search this
page address in all block devices' /sys/kernel/debug/block/${devname}/rq_hang,
if search operation hits one, we can get the request and know why this io
request hangs that long.
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

Background:
  We do not have a dependable block layer interface to determine whether
block device has io requests which have not been completed for somewhat
long time. Currently we have 'in_flight' interface, it counts the number
of I/O requests that have been issued to the device driver but have
not yet completed, and it does not include I/O requests that are in the
queue but not yet issued to the device driver, which means it will not
count io requests that have been stucked in block layer.
  Also say that there are steady io requests issued to device driver,
'in_flight' maybe always non-zero, but you could not determine whether
there is one io request which has not been completed for too long.

Solution:
  To find io requests which have not been completed for too long, here
add 3 new inferfaces:
  /sys/block/vdb/queue/hang_threshold
If one io request's running time has been greater than this value, count
this io as hang.

  /sys/block/vdb/hang
Show read/write io requests' hang counter.

  /sys/kernel/debug/block/vdb/rq_hang
Show all hang io requests's detailed info, like below:
  ffff97db96301200 {.op=WRITE, .cmd_flags=SYNC, .rq_flags=STARTED|
ELVPRIV|IO_STAT|STATS, .state=in_flight, .tag=30, .internal_tag=169,
.start_time_ns=140634088407, .io_start_time_ns=140634102958,
.current_time=146497371953, .bio = ffff97db91e8e000,
.bio_pages = { ffffd096a0602540 }, .bio = ffff97db91e8ec00,
.bio_pages = { ffffd096a070eec0 }, .bio = ffff97db91e8f600,
.bio_pages = { ffffd096a0424cc0 }, .bio = ffff97db91e8f300,
.bio_pages = { ffffd096a0600a80 }}

With above info, we can easily see this request's latency distribution,
and see next patch for bio_pages's usage.

Note, /sys/kernel/debug/block/vdb/rq_hang only exists in blk-mq device driver
and needs CONFIG_BLK_DEBUG_FS enabled.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

in commit 295949f0 ("alinux: mm: thp: move deferred split queue
to memcg's nodeinfo"), we actually failed to remove deferred split
queue from mem_cgroup unexpectedly. Fix it by manually removing it
again.

Fixes: 295949f0 ("alinux: mm: thp: move deferred split queue to memcg's nodeinfo")
Signed-off-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>

commit 8ab5e82afa969b65b286d8949c12d2a64c83960c upstream.

Cr50 firmware has a different flow control protocol than the one used by
this TPM PTP SPI driver. Introduce a flow control callback so we can
override the standard sequence with the custom one that Cr50 uses.

Cc: Andrey Pronin <apronin@chromium.org>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Alexander Steffen <Alexander.Steffen@infineon.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Zou Cao<zoucao@linux.alibaba.com>
Acked-by: NXunlei Pang <xlpang@linux.alibaba.com>

commit 8f7baad7f03543451af27f5380fc816b008aa1f2 upstream

Neal Cardwell mentioned that snd_wnd would be useful for diagnosing TCP
performance problems --
> (1) Usually when we're diagnosing TCP performance problems, we do so
> from the sender, since the sender makes most of the
> performance-critical decisions (cwnd, pacing, TSO size, TSQ, etc).
> From the sender-side the thing that would be most useful is to see
> tp->snd_wnd, the receive window that the receiver has advertised to
> the sender.

This serves the purpose of adding an additional __u32 to avoid the
would-be hole caused by the addition of the tcpi_rcvi_ooopack field.
Signed-off-by: NThomas Higdon <tph@fb.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NTony Lu <tonylu@linux.alibaba.com>
Acked-by: NDust Li <dust.li@linux.alibaba.com>