Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 22 6月, 2018 3 次提交
    • A
      x86/mce: Always use 64-bit timestamps · bc39f010
      由 Arnd Bergmann 提交于 
      The machine check timestamp uses get_seconds(), which returns an
'unsigned long' number that might overflow on 32-bit architectures (in
the distant future) and is therefore deprecated.

The normal replacement would be ktime_get_real_seconds(), but that needs
to use a sequence lock that might cause a deadlock if the MCE happens at
just the wrong moment. The __ktime_get_real_seconds() skips that lock
and is safer here, but has a miniscule risk of returning the wrong time
when we read it on a 32-bit architecture at the same time as updating
the epoch, i.e. from before y2106 overflow time to after, or vice versa.

This seems to be an acceptable risk in this particular case, and is the
same thing we do in kdb.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: y2038@lists.linaro.org
Link: http://lkml.kernel.org/r/20180618100759.1921750-1-arnd@arndb.de
      bc39f010
    • T
      x86/mce: Fix incorrect "Machine check from unknown source" message · 40c36e27
      由 Tony Luck 提交于 
      Some injection testing resulted in the following console log:

  mce: [Hardware Error]: CPU 22: Machine Check Exception: f Bank 1: bd80000000100134
  mce: [Hardware Error]: RIP 10:<ffffffffc05292dd> {pmem_do_bvec+0x11d/0x330 [nd_pmem]}
  mce: [Hardware Error]: TSC c51a63035d52 ADDR 3234bc4000 MISC 88
  mce: [Hardware Error]: PROCESSOR 0:50654 TIME 1526502199 SOCKET 0 APIC 38 microcode 2000043
  mce: [Hardware Error]: Run the above through 'mcelog --ascii'
  Kernel panic - not syncing: Machine check from unknown source

This confused everybody because the first line quite clearly shows
that we found a logged error in "Bank 1", while the last line says
"unknown source".

The problem is that the Linux code doesn't do the right thing
for a local machine check that results in a fatal error.

It turns out that we know very early in the handler whether the
machine check is fatal. The call to mce_no_way_out() has checked
all the banks for the CPU that took the local machine check. If
it says we must crash, we can do so right away with the right
messages.

We do scan all the banks again. This means that we might initially
not see a problem, but during the second scan find something fatal.
If this happens we print a slightly different message (so I can
see if it actually every happens).

[ bp: Remove unneeded severity assignment. ]
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org # 4.2
Link: http://lkml.kernel.org/r/52e049a497e86fd0b71c529651def8871c804df0.1527283897.git.tony.luck@intel.com
      40c36e27
    • B
      x86/mce: Do not overwrite MCi_STATUS in mce_no_way_out() · 1f74c8a6
      由 Borislav Petkov 提交于 
      mce_no_way_out() does a quick check during #MC to see whether some of
the MCEs logged would require the kernel to panic immediately. And it
passes a struct mce where MCi_STATUS gets written.

However, after having saved a valid status value, the next iteration
of the loop which goes over the MCA banks on the CPU, overwrites the
valid status value because we're using struct mce as storage instead of
a temporary variable.

Which leads to MCE records with an empty status value:

  mce: [Hardware Error]: CPU 0: Machine Check Exception: 6 Bank 0: 0000000000000000
  mce: [Hardware Error]: RIP 10:<ffffffffbd42fbd7> {trigger_mce+0x7/0x10}

In order to prevent the loss of the status register value, return
immediately when severity is a panic one so that we can panic
immediately with the first fatal MCE logged. This is also the intention
of this function and not to noodle over the banks while a fatal MCE is
already logged.

Tony: read the rest of the MCA bank to populate the struct mce fully.
Suggested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180622095428.626-8-bp@alien8.de
      1f74c8a6
  3. 08 6月, 2018 2 次提交
  5. 31 5月, 2018 8 次提交
  7. 28 5月, 2018 3 次提交
  9. 26 5月, 2018 1 次提交
  11. 25 5月, 2018 4 次提交
  13. 24 5月, 2018 2 次提交
    • W
      KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed · c4d21882
      由 Wei Huang 提交于 
      The CPUID bits of OSXSAVE (function=0x1) and OSPKE (func=0x7, leaf=0x0)
allows user apps to detect if OS has set CR4.OSXSAVE or CR4.PKE. KVM is
supposed to update these CPUID bits when CR4 is updated. Current KVM
code doesn't handle some special cases when updates come from emulator.
Here is one example:

  Step 1: guest boots
  Step 2: guest OS enables XSAVE ==> CR4.OSXSAVE=1 and CPUID.OSXSAVE=1
  Step 3: guest hot reboot ==> QEMU reset CR4 to 0, but CPUID.OSXAVE==1
  Step 4: guest os checks CPUID.OSXAVE, detects 1, then executes xgetbv

Step 4 above will cause an #UD and guest crash because guest OS hasn't
turned on OSXAVE yet. This patch solves the problem by comparing the the
old_cr4 with cr4. If the related bits have been changed,
kvm_update_cpuid() needs to be called.
Signed-off-by: NWei Huang <wei@redhat.com>
Reviewed-by: NBandan Das <bsd@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
      c4d21882
    • D
      x86/kvm: fix LAPIC timer drift when guest uses periodic mode · d8f2f498
      由 David Vrabel 提交于 
      Since 4.10, commit 8003c9ae (KVM: LAPIC: add APIC Timer
periodic/oneshot mode VMX preemption timer support), guests using
periodic LAPIC timers (such as FreeBSD 8.4) would see their timers
drift significantly over time.

Differences in the underlying clocks and numerical errors means the
periods of the two timers (hv and sw) are not the same. This
difference will accumulate with every expiry resulting in a large
error between the hv and sw timer.

This means the sw timer may be running slow when compared to the hv
timer. When the timer is switched from hv to sw, the now active sw
timer will expire late. The guest VCPU is reentered and it switches to
using the hv timer. This timer catches up, injecting multiple IRQs
into the guest (of which the guest only sees one as it does not get to
run until the hv timer has caught up) and thus the guest's timer rate
is low (and becomes increasing slower over time as the sw timer lags
further and further behind).

I believe a similar problem would occur if the hv timer is the slower
one, but I have not observed this.

Fix this by synchronizing the deadlines for both timers to the same
time source on every tick. This prevents the errors from accumulating.

Fixes: 8003c9ae
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NDavid Vrabel <david.vrabel@nutanix.com>
Cc: stable@vger.kernel.org
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
      d8f2f498
  15. 23 5月, 2018 3 次提交
  17. 20 5月, 2018 1 次提交
    • T
      x86/Hyper-V/hv_apic: Build the Hyper-V APIC conditionally · 2d2ccf24
      由 Thomas Gleixner 提交于 
      The Hyper-V APIC code is built when CONFIG_HYPERV is enabled but the actual
code in that file is guarded with CONFIG_X86_64. There is no point in doing
this. Neither is there a point in having the CONFIG_HYPERV guard in there
because the containing directory is not built when CONFIG_HYPERV=n.

Further for the hv_init_apic() function a stub is provided only for
CONFIG_HYPERV=n, which is pointless as the callsite is not compiled at
all. But for X86_32 the stub is missing and the build fails.

Clean that up:

  - Compile hv_apic.c only when CONFIG_X86_64=y
  - Make the stub for hv_init_apic() available when CONFG_X86_64=n

Fixes: 6b48cb5f ("X86/Hyper-V: Enlighten APIC access")
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
      2d2ccf24
  19. 19 5月, 2018 13 次提交