When suspending to RAM, the power to the core is cut and the register
values are lost. Save and restore more registers than just IMR.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Document "pinmux" property as part of generic pin controller
documentation.
Fix 2 minor typos in documentation while at there.
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Correct the incorrect function name and description.

Fixes: a76edc89 ("pinctrl: core: Add generic pinctrl functions for managing groups")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add pinctrl driver support for the Axis ARTPEC-6 SoC.
There are only some pins that actually have different
functions available, but all can control bias (pull-up/-down)
and drive strength.

Code originally written by Chris Paterson.
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add the bindings for the pinmux functions in the
ARTPEC-6 SoC, including bias and drive strength.
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The NAND DQS pins are currently named nand_dqs_0 and nand_dqs_1.
However, they both seem to have the same function, just exposed on
different pins (unlike the ethernet TX pins for example, where there's
eth_txd0..3 - all of these can be active at the same time as they are
different data lines).
Rename the NAND DQS pins to nand_dqs_15 and nand_dqs_18 to reflect that
it's the same functionality just exposed on different pins (BOOT_15 and
BOOT_18).
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The nand_groups table uses different names for the NAND DQS pins than
the GROUP() definition in meson8b_cbus_groups (nand_dqs_0 vs nand_dqs0).
This prevents using the NAND DQS pins in the devicetree.

Fix this by ensuring that the GROUP() definition and the
meson8b_cbus_groups use the same name for these pins.

Fixes: 0fefcb68 ("pinctrl: Add support for Meson8b")
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Merge tag 'sh-pfc-for-v4.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: sh-pfc: Updates for v4.12 (take two)

  - Add basic support for the Pin Function Controller on revision ES2.0
    of the R-Car H3 SoC, which differs from ES1.x in many ways.

Add pins, groups, and a function for SCIF_CLK on R-Car H3 ES2.0.
SCIF_CLK is the external clock source for the Baud Rate Generator for
External Clock (BRG) on (H)SCIF serial ports.

Extracted from a big patch in the BSP by Takeshi Kihara.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Cc: Takeshi Kihara <takeshi.kihara.df@renesas.com>

Add pins, groups, and functions for all SCIF serial ports on R-Car H3
ES2.0.

Extracted from a big patch in the BSP by Takeshi Kihara.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Cc: Takeshi Kihara <takeshi.kihara.df@renesas.com>

The Pin Function Controller module in the R-Car H3 ES2.0 differs from
ES1.x in many ways.

The goal is twofold:
  1. Support both the ES1.x and ES2.0 SoC revisions in a single binary
     for now,
  2. Make it clear which code supports ES1.x, so it can easily be
     identified and removed later, when production SoCs are deemed
     ubiquitous.

Hence this patch:
  1. Extracts the support for R-Car H3 ES1.x into a separate file, as
     the differences are quite large,
  2. Adds code for detecting the SoC revision at runtime using the new
     soc_device_match() API, and selecting pinctrl tables for the actual
     SoC revision,
  3. Replaces the core register and bitfield definitions by their
     counterparts for R-Car H3 ES2.0.

The addition of pins, groups, and functions for the various on-chip
devices is left to subsequent patches.

The R-Car H3 ES2.0 register and bitfield definitions were extracted from
a patch in the BSP by Takeshi Kihara.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Cc: Takeshi Kihara <takeshi.kihara.df@renesas.com>

Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

When trying to add a gpio-hog, we enter a weird loop where the gpio-ranges
is needed when gpiochip_add_data() is called but in the current implementation
the ranges are added from the driver afterwards.

A simple solution is to rely on the DR gpio-ranges attribute and remove the
call to gpiochip_add_pin_range().
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Add a Git tree on @kernel.org for maintaining the Samsung pinctrl
drivers.  The tree will be maintained in a shared model between current
Samsung pinctrl maintainers.  Pull requests will be going to Linus
Walleij.

Also add the patchwork for linux-samsung-soc mailing list which will be
used for handling the patches.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Acked-by: NTomasz Figa <tomasz.figa@gmail.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Fix some inverted bit numbers in some pinctrl groups and add missing pins
and groups to be in pair with the GXBB pinctrl pins definition.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

With real-time preemption, regmap functions cannot be used in the
implementation of irq_chip since they use spinlocks which may sleep.

Move the setting of the mux for IRQs to an irq_bus_sync_unlock handler
where we are allowed to sleep.
Signed-off-by: NJohn Keeping <john@metanate.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

We need to avoid calling regmap functions from irq handlers, so the next
commit is going to move the call to rockchip_set_mux() into an
irq_bus_sync_unlock handler.  But we can't return an error from there so
we still need to check the settings from rockchip_irq_set_type() and we
will use this new rockchip_verify_mux() function from there.
Signed-off-by: NJohn Keeping <john@metanate.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This lock is used from rockchip_irq_set_type() which is part of the
irq_chip implementation and thus must use raw_spinlock_t as documented
in Documentation/gpio/driver.txt.
Signed-off-by: NJohn Keeping <john@metanate.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

regmap_update_bits does its own locking and everything else accessed
here is a local variable so there is no need to lock around it.
Signed-off-by: NJohn Keeping <john@metanate.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Merge tag 'sh-pfc-for-v4.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: sh-pfc: Updates for v4.12

  - Fixes and cleanups.

On some Cherry Trail devices the ASL uses the GMMR GPIO to access
GPIOs so as to serialize MMIO accesses to GPIO registers with the
OS, because:

"Due to a silicon issue, a shared lock must be used to prevent concurrent
accesses across the 4 GPIO controllers.

See Intel Atom Z8000 Processor Series Specification Update (Rev. 005),
errata #CHT34, for further information."

This commit adds support for this opregion, this fixes a number of
ASL errors on my Ezpad mini3 tablet and makes the otg port device/host
muxing which is controlled in firmware on this model work properly.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Rockchip finally named the SOC as RV1108, so change it.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
[adapted rk1108 dtsi to keep bisectability]
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Rockchip finally named the SOC as RV1108, so change it.
Also move the compatible list to one compatible per line.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Currently we are trying to enable/disable the clk of irq's gpio bank when
unmask/mask irq. But the kernel's "lazy disable approach" will skip masking
irq when the irq chip doesn't support irq_disable ops.

So we may hit this case:
	irq_enable-> enable clk
	irq_disable-> noop
	irq_enable-> enable clk again
	irq_disable-> noop
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

At first these drivers were written as tristate, but the module
usecases are actually not tested.  Make all of them boolean.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Since commit 3e030b0b ("pinctrl: uniphier: allow to have pinctrl
node under syscon node"), this driver has kept compatibility for the
old DT files.  Several releases have passed since then, so remove
the obsoleted compatibles and clean up the code.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This adds support for the missing PWM pins on Meson GXL SoCs, namely:
- PWM_A
- PWM_B
- PWM_C
- PWM_F (GPIOX_7 and GPIOCLK_1 can be selected as output)
- PWM_AO_A (GPIOAO_3 and GPIOAO_8 can be selected as output)
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Update the sh_pfc_soc_info pointer after calling the SoC-specific
initialization function, as it may have been updated to e.g. handle
different SoC revisions.  This makes sure the correct subdriver name is
printed later.

Fixes: 0c151062 ("sh-pfc: Add support for SoC-specific initialization")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Somehow the QSPI and SCIF_CLK fragments were inserted at the wrong
positions.  Restore sort order (alphabetically, per group).
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Fix typos in hscif2_clk_b_mux[] and hscif4_ctrl_mux[].

Fixes: a56069c4 ("pinctrl: sh-pfc: r8a7795: Add HSCIF pins, groups, and functions")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>

The sunxi pinctrl driver currently implement an irq_chip for handling
interrupts; due to how irq_chip handling is done, it's necessary for the
irq_chip methods to be invoked from hardirq context, even on a a
real-time kernel.  Because the spinlock_t type becomes a "sleeping"
spinlock w/ RT kernels, it is not suitable to be used with irq_chips.

A quick audit of the operations under the lock reveal that they do only
minimal, bounded work, and are therefore safe to do under a raw spinlock.
Signed-off-by: NJulia Cartwright <julia@ni.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The sirf atlas7 pinctrl drivers currently implement an irq_chip for
handling interrupts; due to how irq_chip handling is done, it's
necessary for the irq_chip methods to be invoked from hardirq context,
even on a a real-time kernel.  Because the spinlock_t type becomes a
"sleeping" spinlock w/ RT kernels, it is not suitable to be used with
irq_chips.

A quick audit of the operations under the lock reveal that they do only
minimal, bounded work, and are therefore safe to do under a raw spinlock.
Signed-off-by: NJulia Cartwright <julia@ni.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The amd pinctrl drivers currently implement an irq_chip for handling
interrupts; due to how irq_chip handling is done, it's necessary for the
irq_chip methods to be invoked from hardirq context, even on a a
real-time kernel.  Because the spinlock_t type becomes a "sleeping"
spinlock w/ RT kernels, it is not suitable to be used with irq_chips.

A quick audit of the operations under the lock reveal that they do only
minimal, bounded work, and are therefore safe to do under a raw spinlock.
Signed-off-by: NJulia Cartwright <julia@ni.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The bcm pinctrl drivers currently implement an irq_chip for handling
interrupts; due to how irq_chip handling is done, it's necessary for the
irq_chip methods to be invoked from hardirq context, even on a a
real-time kernel.  Because the spinlock_t type becomes a "sleeping"
spinlock w/ RT kernels, it is not suitable to be used with irq_chips.

A quick audit of the operations under the lock reveal that they do only
minimal, bounded work, and are therefore safe to do under a raw spinlock.
Signed-off-by: NJulia Cartwright <julia@ni.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The sysfs and debugfs entries for pin control drivers work better when
the individual pins are given real names, even if they are all just
"gpio0", "gpio1", etc.
Signed-off-by: NTimur Tabi <timur@codeaurora.org>
Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

To prevent external signal crosstalk, some pins need to
enable input schmitt, like i2c pins, 32k-input pin and so on.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>